20 Best Zero Turn Mower Lift (2023 Updated)

Haven’t had a chance to actually use it yet (hence 3 stars), but here are my thoughts to date. This is quite a bit heavier than I expected it to be, and therefore stouter, able to take a beating, seemingly durable.

The tires are pneumatic (totally unexpected – maybe I just didn’t read the description well enough?). Considering how we are instructed to use the “stabilizer bar”, I’m not sure just how much stabilization it can actually provide.

The first stages of assembly are a little difficult as it wants to roll too easily while trying to bolt down the lift arms. And there is no indication in the instructions as to how to figure out which set of holes, which placement locations, will work best for a given mower.

Maybe something like measure the distance between the front wheels and from the front of the mower to the front of the deck and then use holes A, B, or C and set the lift arms into holes D, E, or F. Considering how each piece is bolted in place during assembly, this will be a pain if I guess wrong and have to take it apart, move the arms, then reassemble.

Once all that gets worked out, though, this looks like it will serve the purpose quite well, and that being an easily transportable lift for my RZT mower.

I bought this lift for my Toro ZTR after trying other lifts that wouldn’t work due to the front mower wheel getting in the way. This lift worked beyond my expectations. It is solidly built to last a lifetime.

It will not work on tractor models, at least on the John Deere I tried it on. I couldn’t lift my Toro by putting the lift arms under the mower deck as directed but the front bar of the mower works even better.

It is built to move around which makes storage and easy task.

It was easy to assemble and made very heavy duty. It was better than I thought with high quality construction. It lifted my Gravley HD52 with little effort and made servicing the deck & blades easy. My only complaint is it is harder to get to the center blade unless from either side.

It is way better than other lifts I had looked at that cost more. I would highly recommend it to anyone with a big zero turn mower.

Bought this to prepare for this year’s mowing season. Shipping was reasonably quick and I was eager to set it up as soon as it arrived. Be careful to not put much faith in the recommended wrench/socket size provided in the instructions, as they simply were not right.

Maybe they have changed some of the bolt sizes since the instructions were printed, I don’t know. The reason I gave 4 stars is that, as at least one other reviewer said, the floor bracket was not straight which resulted in a very wobbly and unsafe platform.

I thought about contacting the manufacturer to get a new part, but instead just enlarged the bolt holes to allow me to tilt it until it was level with the ground. Lastly, I was hoping to be able to lift my atv with this, but there is a maximum tire diameter for a reason.

If the tires are too big, they won’t sit in the tire “cradles” correctly. Too dangerous. Good price for this unit, when it looks like the manufacturer has doubled their prices in Canada. The HDL500 from Mojack went from $200 to $450 this year without making any changes to the product.

Get this unit while you can at the price!.

Just recently purchased this lift on the strength of the best price and good independent review. Very easy assembly with just a few tools. I have not actually had to use it as of yet but will find it useful getting tractor ready for winter storeage.

I purchase two small stationary jacks as an extra safety precaution to place under arms of lift. Probably not necessary but felt it a prudent purchase. My ratingss are based on initial assembly and operation of lift.

May revise after actual use.

This is a very good lift. I put it together quickly and easily. Directions were easy to follow. This lift handled my mower very well lifting and lowering. I would recommend this product without any reservations.

It is well worth the price and more. I researched many others and felt that this was the best quality and value.

The corrugated shipping container is essentially two boxes, one inside the other. So the overall packaging is good. However the internal dividers, spacers, void fillers, etc. are poorly done. There were pieces of corrugated scattered throughout the inner box, doing little good.

As a result, one of the forks that hold the axle for one of the wheels was bent, so the wheel could not fit. This is heavy steel, so I needed a sledge hammer to straighten it out. Then the wheel and axle fit well.

The other issue is the yellow tie down straps they provide. They are not long enough to wrap around the 17″ diameter wheels I have on my John Deere X739 tractor. When I emailed Jose to ask for help, he said he could send me new ones, but they would be the same length.

They simply need to be 2-3 inches longer to allow a good grip to pull the straps tight. Lastly, the cranking procedure requires a strong effort. I am 6′-4″ and 260, so believe me when I tell you it takes some muscle.

I did not try the electric drill, since I guessed it would knock me on my can. Overall good product, does the job.

I need to explain that I have an older craftsman garden tractor with a low front end meant for attachments. Because of that, there were many lifts that wouldn’t work for me. That along with a weight of 650 lbs eliminated several narrowed my selection.

This is a heavy duty, well made unit. It gives you the feeling of safety. Lifting my tractor is a breeze. I like that it folds for storage as well. I went for this as a result of “when in doubt, buy the best “.

Watch reviews on line and you’ll see. Just be careful to use strong supports if you hang it on the wall!.

I recently received this jack as a present and have put it to the test. The jack is very well made and can definitely be used safely for what it was intended for. It has the durability to lift it’s intended weight even though I have not done so yet.

The strap along with all the main parts are very sturdy and fit together securely. The drill adapter function is a great idea although I don’t feel a need to use it. I would have liked the wheels to be slightly lower to make moving it around easier but that is not a big deal.

Putting together was really easy. This product deserves 5 stars.

Assembly took me less than an hour (required pliers, wrenches and a screwdriver). I tested the unit without weight on it and familiarized myself with operating it before I tried lifting the mower. Lifted mower without issue.

The unit does what it is designed for. I have a 46″ riding mower and it lifts easily. One thing that I wish this had was a set of brakes on the back side to keep the lift from moving when you ride your mower onto the chocks (it tends to move/slide when you drive onto the chocks).

I have to put some weight behind it to keep it from rolling back. Other than that issue, I wish they would have installed some kind of safety bar that would catch the mower if the jack failed or was accidentally released.

But on a positive note, it is very easy to lift the mower with this. A few easy pumps and the mower is high enough to get under the deck and clean it or remove and replace blades. I would just advise people to take a little extra safety precautions.

I was going to wait for the snow to go and had a chance to put it to use but due to the sweepstakes I’ll do it early. It went together quite easy, no special tools needed and the directions were easy to follow.

It appears that it will do everything I want it to, goes up and down very smoothly with a turn of the valve on the bottle jack. The materials seem to be of good quality, heavy duty to the point I will feel comfortable reaching under while it is raised with the mower on though I will use a jack stand for extra insurance if I am going to crawl under the raised machine.

This is just a good practice any time you go under a raised load. The only reason I gave it four stars instead of five is I have not had a chance to put it to actual use. We are 12 hours into a 24 hour snowstorm at the moment and the accumulation at this point is over 12 inches, the grass is not growing yet!!.

The pro lift jack was all it was advertized to be at a very reasonable price. It was easy and quick to assemble. I would like to see in the instruction manual something about removing the rods in the lift shoes when not working with a zero turn mower.

I had to call technical support to find that out.

If you have ever tried to put new belts on a lawn tractor or try to change the blades or remove that piece of rope that’s wrapped around your blades that the kids left on the lawn then this is the tool you have been missing.

It’s light, strong and easy to use. Drive the front wheels (or back) up onto the platform (the platform that holds the wheels slides in and out and locks in place with a pin to accommodate wide or narrow tractors).

Use your foot on the pedal and it a few pumps the front of the vehicle is two feet up in the air making access to everything underneath a breeze. No more hurting wrists trying to change blades and such.

The unit has spring loaded pins that automatically will lock in place hold the unit up in the air in case anything fails so it won’t drop. I purchased one for myself last year and love it. I actually smile every time I use it thinking where was this thing the last 30 years of my life.

My son was asking how he can get his blades off his larger Toro and I picked the recent one up for him for $129. I paid $99 last year. I noticed that someone complained that it is too narrow and can tip??? The other end of the tractor that is on the grounds precludes that from happening so I didn’t understand that comment.

They have two sizes, this is the smaller, less powerful one but it’s perfect for most garden tractors. They do have couple of different manufacturers of these in China. The one I just purchased for my son has a release pedal that is easier to press than mine as mine ends up being too vertical and harder to get your foot on.

Otherwise the quality overall is very good, especially for the price, and the bottle jack that operates it is sufficiently large to pick anything up I have tried very easily.

I had been using a regular floor jack to lift the tractor to work under the deck, but it really could not lift it high enough to easily work under the deck (remove blades, and scrape out dirt/grass build-up).

I looked into one of these lifts some time ago but didn’t get one, and I have to say I’m sorry I didn’t do this sooner. What a difference! This lift will bring the tractor up almost 45 degrees, making the underside of the deck fully accessible.

this is SO much better than the floor jack! I should have gotten one of these years ago. It’s study, well made, and easy to use. I like the two locking tabs which will prevent the arm from descending if the bottle jack fails.

a good safety feature. The only complaint I have is the foot pedal for pumping the bottle jack is not supported very well, so it can move around as you pump it. you just have to focus on keeping it lined up, so not a big deal.

Since this model does not fold down for storage, I’m storing it in front of the tractor, and I park the tractor with the front tires in the lifting brackets. so it’s really not taking up much space. One thing I found is the steel rods that adjust to hold the front tires really do their job.

The first time I tried to back out of the lift, the front tires would not roll over the rods, and the jack just slid along under the tractor. I do have a smooth garage floor. This issue was solved by pulling the cotter pins from the rods, and removing them when I’m not using the lift.

I can pull out no problem now. The rods can be re-installed in a few seconds, so it’s not inconvenient. All in all, a very worthwhile purchase, and I wish I’d done this a long time ago!.

I have owned this Harbor Freight mower lift for two years now. I have two craftsman Tractors that I mow with. I scrape under the deck after every use every time. I have dragged this lift over gravel driveways to and from my truck or trailer to use many times.

Never had a problem until June 2022. Thats two years of no problem use and now in year three there are problems. The brackets that house the wheels are easily bent. I just hammer it back straight. The cheap weld that holds the vertical handle bracket broke clean off last week.

I will bend a piece of steel bar to fit and use bolts/nuts to repair. One thing this broke weld did was show me that it is actually easier to drag this lift from the front ground bar than the handle anyway.

I will fix this lift if it breaks and if I cant I would buy another one because its half the money than the next mower lift. In fact I may buy another lift today with the 20% off coupon. So I dont have to move it back and forth to my properties.

Does not work with Deere X series and maybe others. Bought this for my Deere X380. Quality seemed fine, it “worked” to lift my tractor. After lifting I realized the high point of the bar catches the two rods that connect to the mowing deck on the tractor.

Just hoping I didn’t bend the rods (low star rating) If you look on the Mojack website, notice this model has the wheel placement inline with the center bar, while other models have the wheel placement in front of the center bar.

Lifts and lowers quickly and very safe. I have a JD Z530R which weighs about 800 lbs if you lift the entire machine, but for servicing you only lift the front (engine in back) which is a fraction of the overall, way under the 500 lb lift.

Can only lift 20 or more inches as back of machine has hitch extension. Can easily deal with that.

I just purchased the 500lb model in spite of the BAD advice given on the question and answer section of this site. When asked if the JD x370 would fit and Danial said no because the wheel base was larger than 43 inches.

Apparantly he got that off the JD website. Unfortunately it’s the width of the back wheels not the front. The front wheels fit fine. I have a JD x540 and it is much larger than the x370 and only has a front wheelbase of 41 inches.

Another question about a JD740 asked if the 500 Pound model lift would work and they were told no because that tractor weighed over 700 lbs. DUH, the lift doesn’t lift the whole tractor off the ground, just the front wheels.

You get an E for effort TSC. If you are going to have a question and answer section on your website, do your homework and get it right, or open up the answer section to the public.

The lift of course needs to be assembled and can be a little challenging. However once assembled it works great! The biggest problem I had was with the packaging. The box was very heavy and as a result it was damaged in shipment.

There were several holes punched in the box which allowed some bolts to escape. The bolts that came up missing were pre-installed on the lift platforms. Several of them vibrated off and were loose in the box.

Two of them escaped through the holes and became lost. I called support and they sent me the bolts I needed right away. They said they were working on beefing up the packaging.

It was well worth the extra cost for the heavier built unit. It lifts my Cub Cadet LTX 1050 with ease. The function is smooth and the frame doesn’t flex at any height. The assembled lift is a little heavier than I expected.

However, it is easy to maneuver on a concrete floor. It’s a little difficult to move around on gravel, but a little grunting will get it done. I had the lift shipped to store and the packaging was handled pretty badly.

There were torn places in the box which allowed two bolts to fall out and were missing. I had replacements at home so it wasn’t a problem. Overall, I am quite happy with it and would highly recommend it to others.

I just purchased this lift and have only used it once. The jack had some paint damage due to the shipping carton being damaged, but nothing a little touchup paint couldn’t fix. The jack worked well, with one exception that it would tend to slide when moving the tractor onto the cradles.

I am going to try to deflate the front tires slightly before using it next to see if this addresses the issue. It appears to be a well-built product and provides an additional margin of safety for heavier tractors.

I previously had a jack screw version from the same manufacture (rated for 450lbs. ) that failed after 3 uses. I was disappointed that this was not covered under warranty, but at least I was not hurt.

The hydraulic version appears to be a much better built and is offered at lower price at Tractor Supply. I really like that the jack requires very little assembly and stores nicely on the wall. In addition to making the cradles easier to drive onto, I have one more recommendation.

They could consider adding a provision to allow the jack handle to be used to more easily maneuver the lift around when on the floor. I could only give it a 4-star rating at this time because of my limited use.

If it works well over time, I will consider rerating it to a 5.

Honestly, I had mixed feelings after reading the online reviews, but I really needed something to help with routine cleaning and blade changes. Apparently we grow rocks, big rocks, and my mower blades find them.

Blade changes were extremely difficult. I took the risk and bought the MoJack 550. What? No assembly? You gotta be kiddin me? Set it up right out of the box. Performed as advertised once I read the instructions and understood how it operates.

Raised my JD 135 with no issues. Felt solid and stable even on grass. I was able to use an air impact driver to change blades. Took less than 10 minutes. I’ve used it 3 times with no issues or problems.

How long it lasts is the only question. Right now I’m happy and recommend this jack!.

The lift worked great for a little over two years – maybe 40 cycles. Now it stopped lifting all the way. Checked for fluid leaks – nothing. Added just a bit of jack fluid thinking maybe it needed some.

Nope. Probably the internal seals are leaking. Funny how it stopped working just after the 2 year warrenty expired! Would give it a 5 star rating, but now only a 2 star because of the poor quality bottle jack.

My guess is that everyone is having a problem and have to replace the bottle jack but supply cannot keep up with the demand. Now I have to find a solution as I only need this thing a couple more times before the season ends.

Unit arrived and not damaged. Hired pro to assemble and unit did not lift. The Pro disassembled and reassembled unit still not lift. Number listed in manual goes to Verizon. It is junk and will be picked up by metal collectors.

The company is onmy do not buy!.

This jack is a must for work on your riding mower. A safe lift that locks the cradle as you lift. I’m working on the blade area on my rider and this jack gets your mower up high and wheels are secure in the tire cradle.

Great value for your money!.

I bought this jack, because my ZTR is very heavy and was concerned about changing blades and having to be under heavy mower. Jack does everything stated and actually does it well. I am a little concerned over the weight of the jack and ease of use! The weight I can not change, but was hoping that putting wheel pin behind front wheel would be easier and adding clip to hold it in place.

That part of the jack in most cumbersome to me, but is definitely safer to be under. I wished they made jack that can driven onto, then use straps to hold front tires in place, but no, you have to drive up to jack, slide pin behind front tire and place clip on pin, then add the strap.

This jack weighs about 75 lbs compared to Mojack’s website that it weighs 65 lbs.

Target’s part of this was great– shipped a day early, no damage whatsoever to package. But the MoJack had one flaw that I was able to re-engineer: the spring-loaded pin that allows the vertical part to be lifted slightly then folded against the base did not have a locking function.

It was obvious that the manufacturer used the same type of spring loaded pin that was used on the crank lock. I drilled a small hole in the pin at the appropriate place and can insert a ‘hairpin clip’ now to hold the pin out to allow the vertical part to fold down.

I love my lawnmower lift! I was finally able to change the oil and change my regular blade to a mulching blade with very little effort at all. I am 50 yrs old and disabled and I was able to turn the crank to raise the lawnmower with little effort.

Yes I needed my son’s help changing the blades but that had nothing to do with the lift. Assembly was a breeze and the instructions were clear and easy to understand.

Awesome setup! Saves a lot of backbreaking labor. Also makes it easier to clean the underside of the deck. Maintenance care is also made more simple. Glad that I made the investment in a Mojack lift.

The Lift is more than expected. My JD Z525 Fits nicely. Takes less than 10 min now to do a Blade change. Note: JD 500 and 700 Lawnmower/Tractor series, the front bumper does not clear until you get it raised off the ground due to the angle brace of the lift.

Make sure Emergency Brake is off, so the tractor will float as the front end is lifted. Use of the Tire Straps is highly recommended.

Very well made, heavy duty piece of equipment and the price is only $30 more than the lighter model you can find elsewhere. Took some trail and error putting it together as the directions aren’t very clear but not too hard to figure out, just easy to put some pieces upside down.

Welded frame of heavy metal and very nicely painted. Glad we spent $30 more.

I purchased two lifts prior to this one and they wouldn’t budge my lawn mower. I have a 60″ zero radius commercial grade mower with a 31hp engine and it’s very heavy. This lift works like a champ, I highly recommend this lift.

You won’t be disappointed.

PROS: Red (what can I say, I like the color) Easy to assemble Lays flatter than most of its competitors Lifts more than most of its competitors Brainless safety latch system (no more forgetting to set it) CONS: 1) Must lay on a flat (not tilted) surface else you may roll downhill! 2) Wheel baskets (my BIGGEST gripe).

2a) Tire (sizing) adjustment pins are unnecessary (in my application — Garden Tractor) 2b) Angle of the baskets in the lowest position lean back much too far (I need to leave the brake on for a few pumps to avoid the GT from rolling off, yet it needs to be free-wheeling to avoid dragging the rear tires — too much switcherooning) 2c) Slightly crooked when in the outermost position (and almost too wide for my GT) 2d) Line up nicely in the innermost position (but it’s too narrow for my GT) 2e) Why only 2 positions? Lots of real estate in that bracket, yet only two slots? Time to break out the drill! Problem solved.

3) Safety/cotter pins throughout are ridiculously tiny (for my average size hands/fingers) – nothing worser than needing a tool to remove pins from tool-less components! 4) The handle needs to be removed when jacking this thing up (it sorta gets “in the way”) While none of these CONS should stop one from purchasing this lift, there is room for improvement (given the cost when compared to the less expensive offerings out there).

The mower lift works great. I used it on my zero turn mower and it had no problems. The only thing that I found is when you try to drive the mower on the lifting arms is that it has a tendency to push the whole jack away.

I think that is a minor thing but I thought I would put it in my review. I would buy it again.

Great lift. Was shipped fast and super easy to put together. Folds up for easy storage. Don’t know why I waited so long to get one. What a back saver!! You’ll be surprised how often you will use this.

Makes the routine mower maintenance so much easier and not such a chore. Highly recommended.

Excellent mower lift. It was fairly easy to assemble. Assembly instructions were very small print. I have a large JD X360 and the front bumper barely clears. I think I can adjust it slightly. (bumper) The jack should disassemble enough for winter storage! The uprights that support the jack are hollow and you must be careful not to overtighten the mounting bolts.

I substituted larger flat washers to help with support in this are. I would highly recommend this mower lift. Wish it was made in USA though!.

Some of the pins like the one that holds the foot down are a little loose in the hole. I like the jack style lift over the screw style, and there is also a pin to secure the up position for safety. The lawn tractor it lifts is a good size and the operation feels secure.

This product was exactly and is exactly what I needed. The functionality is easier then expected. The hand crank works but I use a drill and it rises smoothly. I definitely recommend this product and I have Not a paid for this comment.

I’m real and live in Minnesota and wish I would of purchased this years ago. So many times I parked on the street curb and layed in the gutters just so I could reach underneath. Them days are gone. Again, you’ll like it.

I bought this mower lift as a critical item to accompany my zero turn. I didn’t really see how anybody could do blade maintenance or debris clearing without something like this. I have friends that use a front-end loader and straps to raise the front end of their mower, but I don’t have a tractor.

This serves it’s purpose well, and it had hardly any assembly, about 3 steps. I can set it up and have the front of the mower in the air in about 3 minutes. I do back the mower up against a wall just in case it wants to slide, but the straps around the front wheels keep it secure.

I also like that it folds back down fairly flat, so it doesn’t take up much room in the garage when not using it. I would buy this again.

Got to my local store in a timely fashion. I’m pretty sure I got a return, as the pins that hold the wheel brackets in place where not in the plastic sack attached to the manual, there was at least one paint chip, and the packing was a bit wonky.

Found one of the pins in one of the holes in the main part and the second (thankfully) in the bottom of the box. I’ll probably replace them with safety pins at some point, even though the pins that came with it work fine.

Putting it together was easy (had watched a youtube video). Hand cranking was very hard in the beginning (I’m an old man), but once I got over the hump the cranking was much easier. Worked as described.

Very sturdy and I felt safe working under the deck.

Product is solid and well-made. Easy to assemble and fairly well designed. Great value for the money. I have a fairly large lawn tractor and it easily lifted mine and seemed pretty stable once it was fully deployed.

used only once so far but works. Unit does scoot a little as you drive tractor onto wheel brackets but overall seems good. fairly easy to assemble

The lift itself is great. I bought it for my husbands birthhday however it was used when I received it and missing pins. It was too heavy to return so I called and got pins sent to me. I would have rather had a new one and not a floor model or whatever it was used for as the paint was chipped and it clearly was not new so was dissapointed in that.

I will not order online again.

Worked Great the first two times I used the lift! The third time it was dead! Warranty not worth the paper it was written on! Mojack customer support never called back! Save your money and time and don’t buy any Mojack products!!!!!.

The mower out of the crate and running 100 feet quit driving. The drive belt broke and took out the hydro gear cooling fan. Made an appointment with a dealer and was supposedly a factory recall on the idler pulley alignment being shimmed.

However people were instrumental in dealership. Picked it up and cut like a wild stallion. Spent 2. 3 hours cutting3 acres around trees and cars. First time user and will take a few cuts to get use too but hey my mowing time is cut in half if not more.

The cut had no streaking on passes and slowed down some on some Johnson grass. The motor seemed to keep up with the power required when getting in some ruff patches.

First off I’ve used, Toro, Scag, Xmark, Cub Cadet and John Deere. This is the first Ariens I’ve had experience with. I’m very impressed with it. There’s things I like and dislike about all those brands but I would put this up against them all.

It’s built like a tank but also took the time to add details for looks and ease of use. Everything feels solid and like you can put your trust in it. Ariens says it’s for residential use but other than a different engine is a commercial mower.

Haha. My buddy owns a lawn care business with only Scag and Wright mowers. He was impressed with my Ariens cut quality and build as well as little details like the oil change hose. Nothing against those mowers but for the price and features you get with this zero turn it is absolutely worth it.

I purchased the T-5305 several years ago, I don’t remember exactly how far back. My experience has been just fine. I have not had to replace or repair anything. I have 3 zero turn mowers (we mow over 8 acres) and my only problem is that my new Toro Titan MAX wheelbase is too wide for this lift.

I keep it in my barn so it’s not the cleanest but has been working like a champ!! I bought a new lift that has the ability to slide adjust the wheel rack width or would keep using it.

Everybody seems to review the thing when it just comes out of the box bright and shiny saying “It’s a real life changer !!!”, “Best ever”, and similar glowing accolades. Mine is 2. 5 years old and the patina has worn off, I have much experience with this, and can give a true objective review as an “owner”, not just an unpacker.

I have only a single lawn tractor, for residential use only. The short and skinny is, the thing works great out of the box, but after 8-9 months, the bottle jack fails. After the first failure, and while still under warranty, they sent out a new bottle jack which was easy to swap out for an average user (actually my 16 year old son made the repair).

The tech at said these bottle jacks have a smaller than normal bleed hole so the tractor doesn’t come crashing down when you bleed off the hydraulics. The smaller hole is prone to clogging from microscopic residue in the hydraulic jack fluid.

Once the bottle jack develops atherosclerosis, the jack can be raised, but never lowered. To make a long story short. When the 1st pump fails in less than a year, you get a new one gratis from the company.

The 2nd (and now 3rd) are on your dime. For those of you who like repairing these on 8 month intervals, the part number you want is t-5305-1 and can be found by searching the net. You can expect to fork over 4 Jacksons every 8-10 months to keep this turkey running.

I bought this because I’m 67 years old and can’t lift big stuff anymore nor jury-rig something to substitute for safely. I had to change the blades and install a mulcher kit on a John Deere Z335E zero turn 42 inch mower.

I’m handy with tools. I was able to assemble it in about 30 minutes out of the box, no missing parts or misalignment of holes for screws/bolts. It comes with 4 little wheels so it can be driven to the right spot for the mower.

I drove the mower on, put on the parking brake, chocked the back wheels, then jacked up to the max (2 ft?), ENSURED THAT BOTH ANGLE JAMS (I DON’T KNOW WHAT TO CALL THEM BUT THERE ARE TWO “JAMS” THAT FIT INTO SLOTS TO LOCK IN HEIGHTS.

) BE CAREFUL, WHEN I FIRST DID IT, ONE WAS “IN” ONE WAS “OUT”. WITH MINOR TEASING, BOTH EASILY SEATED. Then I released the pressure on the bottle jack so it rested on the “stops” then retightened the release on the bottle jack to ensure that if the stops slipped, the jack would still hold.

RETIGHTEN AS A SAFETY PRECAUTION. I worked under the mower for about 1+ hrs without any issues arising, lowered it by pumping it up a bit to release the “stops” then foot pedaling the stop into the locked position, then gently unscrewed the bottle jack relief valve, standing to the side, because as the mower lowered, the entire jack rolled a bit backwards to compensate for the height.

It mostly folds but not entirely flat. sticks out about a foot when stood up from the wall. I don’t normally write reviews but this is a decent product for the price. Paint job very thick so that I’m hoping that it won’t rust too quickly in the shed.

Good product.

very easy to use and works well. easily lift the tractor mower for easy access and cleaning

TranslateShow in original languageDas Tool reagiert auf den Bedarf. Schade, dass die Farbe des gelieferten Teils (grün) nicht der auf der Website dargestellten Farbe entspricht.