12 Best Utv For Snow Plowing (2023 Updated)

I bought this just before the Ottawa areas last light snowfall. Assembling the blade was relatively easey. Not quite as easy as their you-tube video but anyone with some mechanical skill can do it in short order.

The only trick is installing the mounting bracket. the mount is “universal” but instructions only cover some of the more popular ATV’s. However, again, if you are a little mechanically skilled you can figure it out.

In my case, installing on a 2009 Rhino 800 was easy once I figured out where to put the bracket. It only needs the one main bracket, install across the two square main frame members right below the CV joints.

You can cut slots in the plastic splash shield for the u bolts to go through so you can keep the splash shield. Only one issue, they only gave me two square end U bolts so I had to use two round end ones so you lose a little clearance above the frame rails.

Plow bracket is about 17″ back from bush bar. Winch raises and lowers it perfectly. I just plowed the road in front and parking areas and short lane covered in 30cm/13″ of snow and it worked like a charm! no marks, no dents or bends.

Very strong blade. I am quite happy with it.

If your looking for bang for your buck, this plow is for you. I assembled and mounted on my 2022 Suzuki King Quad 750 in about 6 hrs by myself and with quit a few breaks. The assembly of the plow is easy, but the mounting plate and location was the hardest part.

It has a universal mounted plate and they give instructions for several makes and models (not mine though) and deciding where to put it and its installation was the hardest part. If you have a metal or plastic skid plate on your atv you will likely have to cut and/or modify it to get the mounting plate attachments to fit.

This is the only draw back I see with this plow, but we’ll see this winter how it performs. At its price point this plow is sometimes several hundred dollars below other top brands and the quality of the plow and mounting hardware look to be good, all thick metal with a substantial mass, this is what you need in a 60″ plow for a full-sized atv.

Perfect fit. Very nice finish, too nice to scrape on the ground. Will need another set soon as we have lots of the white stuff this year. Will buy again. How about an exchange program.

These skids were a perfect fit, and actually heaver than the original skids on my dealer installed Polaris Glacier Snow Plow. Installed on a Sportsman 400.

Nice heavy duty plow shoe. Much better than the original ones

I’ve done alot of research and reading on all the snowplows available for my 2019 Honda Pioneer 1000 and found that the Denali was the best built, durable, reinforced, easy to assemble and expertly fitted mounting assembly for my UTV.

The instructions were well written in ENGLISH! and easy to follow. This plow is very, very well made and expected to last a long time. It IS extremely heavy. close to 225 lbs I’m guessing. I felt sorry for the poor Fedex delivery guy!!! It was so heavy I replaced the fairlead with a pulley on the Honda to reduce the stress on the cable because of the angle of the lift and it made a world of difference! I purchased the KFI products fairlead plow pulley 105270 to alleviate the angle for $32 and the Kolpin 10-0145 blade marker kit so I could see where the ends of the plow blade was because of the height of the front of the Honda.

I am extremely happy with the quality and price of this complete plow setup and highly recommended it!.

Well made! install was not bad. Does a fine job for what it was intended. Would have given 5 stars;; There’s always a But; Hardware kit was poorly supplied, some washers were way too big, had to get my own, also when unpacking I happened to cut my hand deeply on a burr on blade swivel base.

the unit was so well made , must have been a fluke. Still it brought install to a halt till after medical attention.

This is the second purchase of this plow. Seems to be very well made and holding up very well. I particularly like the mount to the machine with no drilling of the frame. This kit is a little heavier than some others, but it also stays down in heavy snow better.

The first has been on over a year and we added a rubber cutting edge which was very easy because of the second metal wear bar by sandwiching the rubber between them. It helps a bunch when plowing on gravel.

It works great and has moved a good bit of snow.

Package arrived very quick and in good shape. Parts are very organized and secured for easy location. I did the install, alone, and took about 1 and 15 minutes to assemble and get installed. Went together very easily, fitment was very good, not a bunch of slop at pivot points.

The coating looks good. new and everything works as stated. Adjustable skid plates were nice and the blade tilt stop worked perfect for a 4″ lift to keep a good blade angle. Definitely need the markers to see blade edges, especially with a lift kit.

I also am changing from wire rope on my winch to a synthetic rope because the steep angle of the cable will cause fraying over time so synthetic is a definite upgrade! With the upgrades, I have no doubt this will do everything I need it to do.

Side note a welder buddy commented on the quality of the build, in a good way. BRING ON THE SNOW.

I purchased this plow at a low cost. I have never owned this brand before so I tho it it would be low quality. It DEFINITELY is great quality and will buy again

Great quality and great price. Was easy to install!!

Well I was in the market for a snow plow for my ATV after I has sold my Dodge plow truck. I had looked around before but this time I saw the Kimpex Click N Go. I ran into a little snafu when ordering over a price issue, but those ladies in customer service at Dennis Kirk are top notch and can make a decision.

Plow was shipped the NEXT morning and UPS unloaded it right in front of my garage door. So far so good. I had a little trouble mounting the bracket under the frame even though I had the ATV standing up on the rear wheels under the front bucket of my backhoe.

But I got it on there OK. May decide to tack weld a couple of places under there this summer just to make sure. My ATV has a brush guard on the front that makes it a VERY close fit out front. When the blade is angled it hits the brush guard.

No problem thought, it pushes the snow great. Have only used it once so far but snow on the way in a day or two, so it will have plenty of work lined up. Plow works great, very good quality, and the people I dealt with at Dennis Kirk were super.

The directions they send could be a little better, and the directions on the video come out in French when you print them instead of English like on the computer screen. But its on there and I’m happy.

Plow works great thus far. Seems well made and easy install. Love the 2 pin quick connect and disconnect. Would recommend!

Great little plow. Lifts high and mount does not hang down so plenty of ground clearance

Don’t have snow just yet, so can’t try this plow out. It’s heavy and sturdy, looks like it will work well. Only difficulty was assembly– the plow blade and the pivot assembly that ties it to the ATV needed a bit of (ahem) “persuasion” with a large hammer in order to go together.

Looks like it’s just a tolerance thing with the welded structure. I got it together. don’t know if the tight fit will affect the ability of the blade to move when needed. I suspect it will loosen up a little with use and will then be fine.

I bought this plow and the Swisher ATV Mount Kit for my Honda Rincon in January 2018 – it worked fine once it was installed. But, assembling and installing the mount kit and the blade is a huge pain – not quick and not easy.

Fortunately, in addition to the usual garage tools (wrenches, socket sets, hammers, etc. ) I have an air compressor operated socket set and ramps – both are needed (a hoist would have been helpful too).

I think it is a good product but don’t underestimate the assembly steps. Also, the instructions that came with mine where on a CD that was totally smashed. useless, so had to find something similar online as a guide.

This plow is just awesome! I bought it with the universal mounting kit to put on my Honda Rancher. It’s very well made and really heavy duty. I plowed us out of 20+ inches of snow and couldn’t be happier with it! The universal mounting kit allows you to put the plow a little farther out in front of you so you can raise the plow pretty high to manage the big snow piles.

Love it!.

I found this unit to be very user friendly, I installed the universal mounting kit myself in just a short time and was out moving dirt on my property. I had to terrace a hill that was quite steep and the included foot pads provided just the right angles to allow me to work the hill.

The manual adjustment to the angle of the blade was easy to use and provided good control to move the soil to the areas I needed to fill. I still have a lot of soil to move but I am sure that the Plow Blade will be able to provide the necessary muscle I will need.

I would recommend this unit to anybody that has a quad and needs to terrace their property without having to hire someone with a large tractor.

Thermal paper saves us time to look for ink ribbons. We just pop in the roll of paper and it just works. Love the printer!!

You may as well use a piece of Tin from Grandpa’s old barn he built in 1960, would be cheaper and probably stronger than this piece of junk.

None of the codes worked. All of them are already registered under different products.

Just got this plow installed the other day and used it over the last two days. It does a fine job and does what the manufacturer says it does. The only reason for my downgrade is that the instructions (in combination with Champion’s YouTube instruction video) are not clear on a few items that you MUST install correctly or the system won’t work.

The video is good, but it glosses over a LOT of things.

Great plow for the money. Ships quickly, easy to assemble, easy to use. Five positive stops, have to get off quad to change it. Spring tension on blade adjusts easily. Attaches to the quad in seconds with two pins.

Makes short easy work of clearing my driveway. My only complaint; i didnt buy it SOONER!.

Everything is scratched. Every corner. The powder coat is chipping off. The plow corners are extremely bent. Box was destroyed. Everything should of been wrapped in plastic or some kind of protection.

Probably wont ever buy anything online from here again.