20 Best Sig P365 Grip Module (2023 Updated)

This is an excellent upgrade to the flat bottom P365 magazine. If you feel you cannot correctly shot this pistol with a flat bottom floor plate then this is the item to have. I have tried the NDZ which is nice, but heavier due to made from aluminum and the Armory Craft version as well.

If you are looking for a low cost effective base plate upgrade this will meet your requirements. Many have said this is a good fit for them. Pearce makes quality items for various firearms in the industry.

This was exactly as advertised. As the title here suggests, it actually seems slightly better proportioned than the extension on my factory extended magazine. for my hand, at least. Otherwise, the construction and texture feel equivalent to the factory Sig extensions, and it’s a perfect fit for the P365 magazine.

It was s super-easy install, too. I would definitely buy this again if needed.

As it was designed for the P365, I had to remove two side flanges and slightly taper the sides for it to fit my P365X 19 rd mag. Easily done with bench sander. See pics. Pleased with the added grip length.

I have been a concealed carry licensee holder for 27 years here in Texas since it has been legal. There is probably not a handgun made that at one time or another I have carried in those 27 years, and all were carried in a leather holster, until now.

When Kydex first came out I thought that was the stupidest silly thing someone could do making a holster out of plastic. Blasphemy! Well, I saw the light, or a YouTube video, that caught my interest on the Tulster OWB Contour Holster.

The biggest issue I had with the Kydex type holsters was how far they stood out from the body. I like the gun close and tight against my body and from what I saw in the video that Contour holster did just that.

So, I ordered the Tulster OWB Contour Holster for my Glock G43X from Tulster and It fits close just like I like it and is more stable than any leather holster I have owned. I like the snap in and out feel knowing that gun will never leave that holster unless I pull it out.

Another leather holster goes in the holster drawer, and I am a now a proud Tulster Kydex holster owner. The Contour fits the bill for an OTW. Tulster has converted a dyed in the wool leather holster guy to plastic, er, Kydex holster owner.

Keep up the good work you have an excellent product. Job well done. My next purchase will be the Profile for my G42.

WOW! Tulster is an AMAZING company that makes a stellar holster!! First of all, I was looking for an American made holster to replace the one I already have that is less than ideal because of the SAS contours of my pistol.

To avoid making another bad choice with a holster, I wrote Tulster and asked them if they could address some of my concerns. Now I don’t want to set the expectation that my experience is their norm, but the next day I got a call from one of the owners.

He took time out of his day to call a random potential customer. Who does that?!?! He was genuine, authentic and, to me, represented the pinnacle of what an American company could/should be. He earned a customer for life.

I ordered their Profile holster and augmented it with their 1 × 1. 5″ DCC Monoblock Metal Clip – Profile/Echo Series. I couldn’t be happier. Not only was their customer service an unparalleled experience, their product is extremely well crafted and refined and shows in every contour that Tulster genuinely cares about making a product worth every penny spent.

The Sig with the Lima slides in with that satisfying click and it’s also super comfortable to wear as my edc. Thank you TULSTER!.

As we all know, there is a plethora of places on the market making Kydex holsters, and this review isn’t about bashing any of those products as I own some of those other brands. But here are the key points I found that make my Tulster purchase spot on for me: 1.

) GREAT finish, the holster is professionally finished, no sharp edges to snag on clothing or skin, easy on and off the belt/pants. 2. ) Adjustable cant, easy for appendix carry or if you aren’t into that great for side carry, i.

e. 3-o’clock. 3. ) Fits my SIG like a glove and the retention is solid, like that it has an adjustable retention screw, full sweat shield and a very positive click when I holster my weapon. 4. ) I like the way the trigger guard is cut which allows me a good purchase on the grip of my pistol, fast and easy access and then to reholster it.

5. ) I like the raised sight channel and the muzzle being open ended which is a bigger plus if I were carrying it OWB. Lastly, love that it’s made in the USA and in Oklahoma, this has been one of my better purchases with regards to holsters, and I have zero regrets on getting it.

This is one that won’t end up in the box of other holsters that didn’t quite measure up to the hype on the website. Hope you get one and like yours as much as I like my Profile.

I’ve tried many different stick on grips and these are one of the best in my opinion. The fitment is precise and the design is just right. I love the granulated texture for my bear gun which I carry on a chest holster.

The texture grips so well to the hand that your sure to not slip off in a time when its needed most. I would not recommend this texture for an IWB setup because the granular texture would shred your skin.

Good quality, nice color change for the typical all black plastic pistol. Good addition to Creed, since you can’t upgrade the grips. Be patient when installing, start at the back and work forward slowly.

Easy to apply, looks good on my green P3at. Covers the sides and front of the grip really well but I wish that it would provide better coverage for the upper part of the rear grip. I would have given it a 5 if it would have fit the back of my pistol better.

I had been looking at these holsters for awhile. I’ve tried several different ones but was never really happy with any of them. Finally decided to just go ahead and get this holster with the claw attachment.

This is absolutely the best holster I’ve used, so far. The fit and finish is superb. There are no sharp edges and it has a full length sweat guard. The holster is thin and compact but not cheap. The retention is fantastic.

Couple that with the adjustable ride height and adjustable can’t, you’ve got a rig that can be personalized your own way. Now. About the claw attachment. It does exactly what it says it does. It pulls the grip in tight against your body thus making your firearm virtually invisible.

I live in Florida and with the heat and humidity, I usually wear just shorts and a T-shirt. With the claw attachment, my firearm practically disappears. I would highly recommend anyone adding this to their purchase.

Since I got this holster a couple of weeks ago, I have been wearing it daily. It is, by far, the most comfortable holster I’ve used. Let me just say this. If you’ve been thinking about getting a Concealment Express holster, just get it and give it a try.

Don’t forget the claw attachment, you can’t beat it.

Hi Ben. I received my 2 holsters in the mail yesterday. The IWB holster is perfect. Just what I was looking for. I haven’t mounted my Sheld Sights, mini reflex sight on my HellCat yet but it looks like it will fit inside of the holster nicely.

I made a mistake on the OWB holster. I don’t think the one I ordered will holster my HellCat with the Shield Sight Mini reflex sight mounted to it. Will it be a problem to swap it for one that will holster my HellCat with the mini reflex sight mounted? I don’t know exactly which model that would be but I’ll take a look at the choices and see if I can pick the correct and run it by you.

Is that Okay? The H&K fits nicely in the holster I got for it. Smooth draw and secures the weapon nicely.

To start, had to wait two weeks for delivery, even though site said that holster was in stock. No response from my request of a shipping date and no return phone call. BUT, Tuckable IWB means what it says, it’s tuckable.

I adjusted the depth and cant and now I almost don’t know it’s there. I’m south paw and 6:00 O’clock carry and it rides great, even on a 100 mile road trip. This holster is all I think I will ever need for my Taurus GX4.

I live in N. E. Texas, hot and humid like what Frank H. stated about Florida, the sweat guard is appreciated. If I ever get another carry tool, I will be sure to look at Rounded holsters first.

I should have gotten one of these a long time ago. It has a very affirmative snap and retention that can be adjusted. It appears to be quality made. This is not actually a carbon fiber holster, but rather it just has a fin carbon fiber layer on the exterior.

The only complaint that I would have with it is that it rides high compared to what I’m used to with a crossbreed super tuck deluxe on the lowest setting. However, I’m carrying a much smaller gun with this p365 so it’s not really a deal breaker.

This might be a problem if I was carrying a bigger firearm. I added a picture with my shirt tucked in so you can see how I had it rides. This fits tactical belts but also works fine on normal with leather carry belts.

I have one of your IWP holsters for my SW Shield for about 5 yr now it is fantastic. I just got a new gun SigP365xl I accidently ordered a holster for std 365 You allowed me to return for even exchange n/c.

I just started using it right out of the package slight tension adjustment. Put it on perfect fit perfection in carry. I love your product Recommend it highly to everyone I know who carries. Fabulous holster fits great comfortable all day use no movement no discomfort ease of draw.

slight contour makes it fit close to the body. amazing could not be more pleased. sorry no pic. customer service in returning the wrong size to get the correct size and the help, everything is first rate.

Great company Great product. 5 stars.

This is a very comfortable fit for an IWB holster that with the added claw does an incredible job of reducing printing, even with a light t-shirt on. I also enjoy the fact that the ride height and cant can be adjusted.

If you wear a standard width military tactical belt, you’ll want the larger belt clip as well. If this thing had a pad, it would be the best single holster in the market in my opinion. I carry my pistol in at the apex and it’s very comfortable.

The pistol grip is strong and I never worry about the pistol falling out, and the ability to quickly pull the pistol out is great. I enjoy the fact that the safety on the pistol can be kept on as well.

I’m 5’10” and 190lbs and I have no comfort or accessibility complaints at all.

I bought a CYA holster for my m&p. i wore the holster maybe 20 times. the screws started falling out of it. screws bouncing along the ground, washers bouncing other directions. it fell apart with nothing but light use.

if i was in a gun battle and my handgun was not secure, i’m not feeling safe. spend your money on something else that will not fall apart. throwing away the other one i bought for my glock. scary, scary stuff.

I was going to write a really good review. Item specific. But this site wont allow something I was wanting to put out. The product worked great for the described item and model it fits. I highly recommend this product for the specific model.

I cant talk about the others since I do not use the other models. Seriously I love this holster. Thank you.

Sturdy, a little bulky compared to slimmer type kydex but has a great snapping safe fit unlike thinner holsters. Overall very well made and easy to draw with the strong clip. Retention can be adjusted to your needs.

Great value.

This is a great off the shelf holster to start with. I have a lot of experience with custom made holsters that cost way more than this one, but I was very impressed with this holster. I bought it for a 365 and I am running the holster with the claw but without the extra mag carrier attached.

I got this holster because I was upset with how my gun wanted to fall out of my alien gear holster. The alien gear one was awful uncomfortable anyway. There would always be a sharp edge digging into my hip joint any time I sat down.

That one also made me sweat like crazy. I’m much much happier with my amberide. It’s not so heavy and in the way. I’m a curvy female and this has been the best iwb belt I’ve experienced. I wear my gun a lot more often now that I like this holster much better.

It seems most holsters aren’t made with women in mind. If there’s one marketed to women, it’s usually a piece of junk that the gun will fall out anytime you go to pick something up. I love having the retention on this.

I barely had to cant mine from the original position. The only thing that I would knock is that it’s uncomfortable to wear this without your gun in it. So if you have a doctor’s visit, it can get very uncomfortable.

The quick clip can make up for it but then I just have to readjust my belt. It’s very easy to get this off and on. My gun balances nicely too. I feel like I print less eith this one than the alien gear one.

When I showed my husband this amberide, he kept questioning me if this was the one I want. I said I’ve been in this long enough to know what I want. I wouldn’t be showing him this if it wasn’t what I wanted.

I had him try my other alien gear one for another gun I had that had the same sharp edge digging in the hip problem. Now he understands what I went through! I just love having this be a bit more minimalistic.

Customer service is a lost art these days, but Amberide has set the standard. USPS lost my package, and Amberide did not hesitate to immediately send out another one. The holster is exactly what I wanted.

Only complaint I have isn’t really a big one. more of a cosmetic complaint. I ordered the blue carbon fiber IWB holster for my SIG P365 SAS. I thought the carbon fiber would look a lot more “real” than what I saw online in the photos, but cosmetic issues aren’t really a big deal to me.

I am thankful for Amberide’s products and customer service. I plan on buying another holster from them for the next gun I buy. Thank you, Amberide!.

Too loose (Sig P938 rattles around) if tension set properly to retain gun, but allow good draw. Too tight (can’t draw out gun) if tension set to eliminate rattling of gun in hokster. Hoping this is an exception and you can send a replacement holster will fit better please.

I’m a long-time user of quality Kydex holsters and know what is a proper fit on a handgun. Ironically, the Amberide Holster for the Springfield XDS 45 that was on the same Order 6984 fits perfectly! I had already previously emailed you 2 photos and also a link to a large video file that shows the P938 rattling inside the holster and then adjustments to stop the rattling, but becomes impossible to properly draw out the gun! Here’s the link to that “selfie video”, so the image is a mirror image.

Please reply and let me know how you are addressing this. https://photos. app. goo. gl/TsFQnQSqjxy2w8hTA Thank you, Brian Ng 832-217-7287.

Very distinct & gives good contrast. Passes as a marble look.

Good feeling grips, comfortable and easy install.

I received my order in record amount of time, that’s fantastic. I have 2 other Tulster holsters, both are Profiles, love them. They’re comfortable. I can slide them into my waistband in my truck. I can move them around when they get uncomfortable, and they look really good.

I purchased 2 Oaths for my HK and my Ruger. Liked the look of these holsters but I can’t get them to work. They’re uncomfortable, the guns either to low in my jeans, to where it’s awful when I’m sitting down, ( the barrel jabs into my legs) in the wrong place, so that with that metal clip I can’t, one: easily slide it into my waistband, two, slide it around to adjust it, three, the wing catches when you try to slide it into your waist so you have to undo your jeans to affix it anywhere, (neither of these guns have enough of a grip that they stick out really negating the reason to even have the wing in the first place), then you need to know exactly where you want that holster to be because between the clip and the wing- it’s not moving.

The clip makes it hard to remove the holster because like my German Shepherds, once it has a grip on something it’s not letting go, and prying it open sometimes is kinda difficult. And finally, for some reason my shirt wants to slide down in-between the gun and holster when you reholster, I know, you have to make sure that doesn’t happen, I Know.

But I’ve been carrying quite awhile now and I don’t have that problem with the Profiles. I don’t know if it’s the cut for the red dots or what but I was spooked the first time that happened. So I’m extra aware, as you should always be, where everything is when I’m wearing these.

Tulster has always treated me well, fast ship, periodic discounts, they came packaged in a bag which I liked because I get enough cardboard since COVID nowadays, they are a great company, so I don’t like sending a unhappy story.

I have taken the wings off, I made a couple of small bushings to replace the wing, I used the 2 shims on both holsters to set my retention which I really like. I like how small they are and I really like the black multicam.

I’m not done with them and I’ll continue to work with them, it just hasn’t been love at first sight for me. ( Been doing this long enough that I know what holster works for one might not work for everyone, we’re all built different) thanks for your time.

This is my second Tulster OATH IWB holster. The first was for my Springfield Amory Hellcat, and this new one is for my Shadow Systems CR920 WARPOET PISTOL. The holster’s fit and finish is superb, while the spring-steel belt clip secures the weapon well to your carry belt; however, I will say that it would be nice if there were two opposing clips (on either side) for a more secure attachment.

This second point of attachment would facilitate a more accurate / repeatable draw stroke. The negative of having one clip. the weapon’s cant changes with body movements. A much wider clip (at the top), along the belt’s top edge could possibly solve this issue if continuing with the solo-clip design.

The kydex is molded precisely for your specific weapon which helps with retention; however, it would be advantageous having an adjustable retention system that would allow for an even stronger hold in the event of a fall or (God forbid), a struggle for the weapon during an altercation.

I give the OATH IWB 4. 5 STARS! P. S. I find this particular holster to be VERY concealable (more than most) under just a t-shirt! I highly recommend the Tulster OATH IWB holster for your EDC setup. Regards, Mr.

E. Ortiz U. S. Army Veteran.

This is the one! This holster is perfection. I got an Oath for my p365x, in carbon fiber. I also got additional clips. For most of my belts, the stock clip provides a rock solid attachment and perfect concealment.

The gun is already an excellent size, but a minimalistic holster, plus a claw to push in the handle, takes it to a new level. With this holster, I easily conceal carry in gym shorts, jeans, dress pants, and everything in between.

It’s almost like an optical illusion how perfectly is conceals! Materials are top notch, the holster feels rock solid and has an excellent draw. It feels like a well tuned and perfected machine. I feel like my gun is secure, but easily accessible when I want it.

This holster boosts my confidence! This is the one for me. I don’t see myself ever finding something that tops this for iwb concealment on my sig. I show this thing off to all my gun friends, and they all have already ordered their own! Tulster has won me over, and I will continue to purchase amazing products from this great American company!.

Awesome holster. Wish I would’ve come to you first. Purchased a different brand for my P365X (not XL) with a TLR6 light. It was nothing more than two pieces of kydex sandwiching my pistol. No retention and no audible click.

I assumed the TLR6 made it impossible to get a quality holster. I reluctantly have your holster a try, and WOW. Not only was it a perfect fit, it allows me to place the belt clip on either side of the holster.

Excellent product. Great price. Thank you so much.

Ever since I put my light on this gun, finding something to hold it has been a challenge. So glad I found this company and they are local to me, which is great! I have had this IWB holster from CE for two days, just two, and I am 110% ecstatic! The look, the feel, the rigidity, the way it snaps.

Just everything about this holster is great! I love the adjustable CANT and I never thought I would like the feel of carrying in the small of my back (palm in), but with this holster, it works for me and I am going to start carrying in this configuration more often.

Also, for anyone out there that has a P365 with a manual safety, this holster does not cover the safety, however, while holstered it may be difficult to thumb sweep as there is minimal clearance.

Received product amazingly fast. My OCD was not triggered by any part of holster (and accessories purchased), QUALITY and care is definitely there. No unfinished edges, shinny and evenly coated inside and out.

Fit is snug and secure, no worries whatsoever on EDC falling out. As some would say “fits like a glove”. Despite it being snug and secure draw is super smooth, ended up also buying the lanolin conditioner they recommended, but with holster being brand new i didn’t find it needs it (yet anyways), as it looks like it comes with an initial application of it.

Definitely a believer of their products/company, quality, and outstanding customer service (questions, fitment adjustment, returns/swaps, etc). Will definitely pass on great experience to other fellow CC’ers.

Thank you for amazing experience!.

I love my Sig Sauer P365 XMacro and the holster I ordered for it fits it perfectly! I ordered the holster when I purchased the gun and my holster arrived very quickly, even before my gun was ready to be picked up.

I was super impressed by the quality and the fit! Excellent quality and craftsmanship. I would definitely recommend and would order again.

The order didn’t take long to ship. The holster fits nice and is snug. Hold the gun perfectly in my opinion. I do like the look of it but that’s irrelevant cause, well, it’s tucked away. I’m happy with it.

Unfortunately I bought two cause I wasn’t paying attention. All in all, I’d recommend it.

I cannot get the screws tight enough to keep the gun from slipping out of the holster. I think it’s just a little too wide for the gun. I’ve tried to tighten it as far as I can. I may have to get the washer out and cut the washers in half so I can squeeze it even tighter, but that should not have to be done if it fits the gun.

Let me know what I should do. Tom Brozovich.

Good upgrade from my stock P365 slide. I run optics on all my handguns now, and the P365 is my daily carry, so it needed to be able to have an optic installed. Very simple to remove the rear sight/optic cut cover and replace with a Holosun 507k.

The 507k has a rear sight cut out that lines up with the Sig front sight, so backup irons work as well. Finish looks good and matches my M17.

I am very happy with the new grip module for my 365SAS. It was easy to make the swap from my original grip module and like having the flexibility to change the look of this little pistol when I desire.

The price is a little high. But I am glad I made the purchase just the same. The quality of the module is excellent.

This the one of the reasons that Sig is now my favorite brand of firearms. This gives my 365 a little bit of the “WOW” factor. Same quality as the factory grip and the install was literally 5 minutes! For like a glove! Go Sig!!.

Works as advertised. Also run one on my MK25. Provides a very positive grip!

With my P-365 being a smaller hand gun I felt that I just didn’t have a good grip on it so I purchased the Talon grips and they were cut to perfect size and shape. They really give you a grip that you can get a feedback from texture of the grip.

Increased the grip on my P365X 10-fold. Incredible product, worth every penny.

My XD9 Mod2 didn’t really need more grip, but I wanted to cover up the “Grip Zone ” lettering molded into the grip of the pistol. Works great and looks fine. Easy to apply. Get it down towards the bottom of handle as far as you can and it really lines up nice.

And if you mess up , it’s forgiving. Just carefully peel it off and try again. Glad I made purchase.

Awesome addition to the Sig p320. I love the gun but the grip on the Sig p320 is not the best under condition where you hands may sweat. The Talon grips completely resolve the issue, and make it feel like I always have a sure grip under any condition.

It also looks awesome with the FDE grip and a black slide.

This didn’t work out for me and my P365 with a Wilson Combat grip module. It’s the first holster I’ve encountered that doesn’t fit the WC module well. This holster came cut below the beavertail. The thumb tab location proved to be rather laborious for me as well.

Between the cut and the thumb tab my strong hand grip was landing low. The only other pocket holster I have with a thumb tab is cut a little too far forward, but with adjustable retention, it pops the holster off when I swipe it with my thumb.

WIthout modification, the Pocket locker requires me to adjust my grip three times on the draw stroke. While it provides considerable retention and I know the trigger guard is covered, the way the Kydex so perfectly molds to the slide seemed to make me print quite a bit.

The P365 however is a large gun for the pocket. Unloaded I put it in my pocket and by itself, I could barely make out that it was a gun in my pocket. This led to looking for minimalist options. Not quite BORAII minimalist, but I’m finding much more success with a holster that is smaller than my handgun that seems to break up the print better.

I think it could be a nice holster with some modification, but I don’t want to ruin it, and I’m not particularly willing to pay shipping a 3rd time and I’ll just consider the shipping charges my fee for trying it out.

Sorry Vedder. I settled on a minimalist leather holster.

Great quality holster, I was however disappointed to receive the holster and find that the thumb tab was not curved outward, but sticking straight up above the rear of the slide. This is not the way the thumb tabs are depicted on web site.

I called Vedder to question this and a nice lady informed me that others had complained about the curved versions giving some discomfort in the crease of the pelvis and leg when pocketed. The tab still serves its intended purpose, but Veddar should note this on their website and not make an assumption all customers will be good with this change.

I now have three choices; live with it as it come, drimmel away the thumb tab, or heat the Kydex myself and fold over as depicted in website pictures. I was also dismayed that delivery took almost three weeks.

At the time of purchase, I was not made aware of the backlog. I paid for 3-5 day ground shipping, so after about a week and after seeing my order showing as fulfillment pending, I called only to be told they run three weeks out due to backlog.

Vedder makes a great holster but could do better with upfront communication. I will possibly purchase again due to quality, but if I find a comparable quality holster with quicker shipping and better overall communications I would possibly consider something else.

I’ve finally found a Kydex holster that actually fits the Glock 42: the Vedder ProDraw Paddle holster. My handgun fit perfectly in the holster right out of the Vedder cloth bag (in which it ships). A half turn on the retention screw was all that I needed to get the desired ‘snap’ and fit when drawing and holstering my Glock.

The craftsmanship and quality of the ProDraw was immediately evident: smooth edges around the entire holster, snug fit without any gaps, excellent sight channel for easy holstering (for any variety of sights), excellent size for concealed carry, innovative paddle that fits over a belt or the pants, and high quality material construction.

In short, the Vedder ProDraw holster is the perfect Kydex holster for those having difficulty finding a holster claiming to fit a Glock 42. Incidentally, I recently purchased two paddle Kydex holsters from two other well known vendors for my Glock 42.

Both of the paddle holsters left gaps around the handgun and required some adjustment for a somewhat reasonable fit, although far from satisfactory. My impression was that these holster were made for the Glock 43, but advertised for the Glock 42.

Neither of the other holsters came close to the craftsmanship of quality of the Vedder ProDraw. I considered a leather holster, but most leather holsters have belt loops for 1-3/4 inch belts: Three problems – 1) most belts today are 1-3/8s inches, unless a belt is special ordered and a ‘gun’ belt; 2) most leather holsters move when a handgun is drawn, unless sinched very tight around the waist; and, 3) most pants for men only accommodate ‘up to’ a 1.

5 inch belt. The paddle on the ProDraw has a rubberized surface that adheres to pants, whether used in belt or pants mode. This unique paddle produces a snug fit that keeps the holster in place for drawing or holstering.

I highly recommend the ProDraw for anyone looking for a holster for the Glock 42, as well as other models of handguns. Now I know why the motto at Vedder is “America’s most comfortable holsters”.

I love the OATH IWB Holster! While the metal clip took some getting used to, it is a sure hold on my belt. The option to add a different ModWing is great, but the smaller one works for me, driving the grip to my body and making my weapon virtually undetectable.

The pressure on the frame is perfect to hold the weapon in place, and reasonable for the “pull”. Optics ready was a big plus! Another item that I ordered at the same time didn’t really meet my needs.

The quality was excellent, it just wasn’t the right fit for me. I had a problem working the return over my phone (my error), and it caused confusion all around. Richard called me directly and carefully inquired about my desire to return, even offering different use case scenario and alternate solutions.

He was in no hurry, he just wanted to make sure all of my questions were answered, supporting my search for the perfect setup. He even took additional time to tell me more about himself, Tulster and its growth, the industry and his outlook for the future.

A great conversation with a great individual with a mind for excellent customer SERVICE. Thanks, Tulster! I’ll be back again. MR.

I have wasted too much money on every grip out there. i now can conclude. These are it! These are the best. Never slippery, i dont get sweaty, and they are not super skinny which i dont like. Great length for brakeless at bout 165mm.

they advertise them as 160mm. Dont waste any more money get these.

Super comfy and perfect length

I’ve ordered this holster with the impression that I could use it as a IWB like in the pictures, but I found out that I cannot. I’d have to buy accessories to convert it into a IWB. That information is not on the website and the pictures are misleading.

The holster is good, apparently.

I bought this and was skeptical thinking it would be uncomfortable. But I was wrong, as soon as opened this package I tried it on and completely was shocked at how comfortable and concealable it was.

Especially since the 5″ ain’t no small gun. Can’t beat the price either! I will be buying more in the future.

Very affordable holster option, and fits the gun very well. Adjustable retention is a good feature, and a comfortable carry choice.