17 Best Seat Covers For Dodge Ram 2500 (2023 Updated)

I bought these seat covers for my 2008 Chevy Silverado. I was concerned about the installation because I have monitors in my headrests and couldn’t find any information about installing the seat covers without having to take apart the wiring.

All the videos I watched showed the headrests being removed for installation. I was pleasantly surprised when my seat covers showed up and had a Velcro opening which allowed the covers to slide over the headrests without removing them and taking apart the video cable.

Also, I love the headrest cover. It conceals the monitors hiding them from potential thieves. Just remove them when the kids are watching a movie. As for the material, no need to describe as it’s the same tough and rugged material they use in their jeans.

Will be purchasing the rear bench seat cover in the future.

The lines work, but the brackets that came with them had to be modified. 1) The way they came, the brass fitting on the end of the hose that connects to the body had a D shaped pin that fit a D shaped hole in the bracket that was sent.

The problem is, if you used them that way, youd have to bend the hard line on the body 180 deg to connect them. 2) There was also no way to secure the D shaped pin in the D shaped hole on the bracket.

I saw 1 E clip on the table I opened the parts bag on, but an E clip wont stay on a D shaped pin. I ended up drilling the D shaped hole out to make it round, and putting the pin in the round hole, then using a hose clamp to secure the fitting to the bracket.

3) Also, the 2 brackets that were sent were identical, and they should have been mirror images for each side. 4) some extra clips were sent that were not used as well.

These lights have been a complete disappointment. The connectors will not mate up with the stock jeep connector. I called customer service to ask about returns, and i was met with an attitude of disbelief about the problem i was having with this product.

I have been a mechanic for 26 years and can handle a tail light install thank you. I have been ordering from Quadratec for years, and have never had this bad of an experience. I hope that this isn’t the beginning of a down turn in your company, as my money can be spent at many other jeep part suppliers.

Upon opening my new Dodge Plasticolor Seatcover I was immediately impressed with the feel of the material. I pulled out three pieces from the box and Dodge Plasticolor Seat cover and got even more excited when I realized the seat cover flaps over the top of the seat and there is a cargo pocket for items on the back of the seat cover.

One of the Plasticolor Seatcover pieces fits on the bottom seat, one Plasticolor Seatcover piece flaps over the back of the seat and has an opening at the top which means you don’t have to take the headrest off to install your seatcover and the third Plasticolor Seatcover piece is the headrest cover, which slips right over your headrest.

This Plasticolor Seatcover is sideless and only covers part of the side of the back seat and the bottom Seatcover only covers part of the bottom seat also. The design of the seat cover is beautiful with the word Dodge imprinted in white at the top of the back Plasticolor Seatcover and has an awesome red colored stitching which really shows up against the black material of the Plasticolor Seatcover.

The instructions to put the Seatcover on the seat is right on the back of the box and is easy to read and follow. The headrest cover and the back of the seatcover are very simple to install but the bottom seatcover is a little but of a struggle, but can be completed with patience.

The bottom seatcover piece comes with hard plastic adapters and hooks that attach to stretchy elastic that is sewn onto the back seatcover piece. The Plasticolor Seatcover is wrinkled now but I have only had it a couple days and it was in a small box which most likely caused the wrinkles, hopefully they will work themselves out.

Love the material and the stitching and I believe this will save my seat from any further wear and tear, along with bringing beauty to my old Dodge truck.

I have a 2018 Dodge Journey. I already have two of these on my front seats! I ordered more so I had backups. I love them. They are a tight fit but it’s the car not the covers. Besides if I’m gonna buy a cover I’d like to be able to cover my seat and sit in it without the straps coming undone!!!!! These fit great!!!!!.

I bought 2 of these. One of them was already torn. Vinyl is thin but looks nice. I will return and replace the damaged product. I like the look. Just be aware this is light weight vinyl. For the price they are not bad.

Nice product but its more of a vest than a seat cover but that is my fault as I did not read the description carefully. Nice product but it would have been better if it was the whole seat cover.

It took me far too long to figure out how to take off my head rests, but after that, smooth sailing. I do admit, I did FAIRLY recently installed different seat covers on another vehicle, so I was familiar with the general process and how things worked.

The fit is great. I couldn’t be happier. Even my center console fits well. Past trucks, this piece never seemed to fit right. I even went without the one piece in my old tuck. This fits well as you can see.

Quality is still unknown as I just installed them. However, no tears or bad stitching out of the box. Everything stretched on nicely, and seems well made. All straps were secured nicely, and I tugged fairly hard on a few for the best fit.

I give it five stars for bang for your buck because I was looking for something not flashy/protect the seat/preserve the trucks value/and not overly priced. This seat cover seems to check all of the boxes.

Not too fancy or luxurious. but just what I needed and wanted. I would highly recommend.

No instructions. Rough Country web site has instructions, but are not very helpful without searching for YouTube videos. Back of rear seat has to be removed- YouTube post shows how. Rear headrests have to be removed -easier than the front- also YouTube video is available.

Front headrest has to be removed- check YouTube. I got a nice snug custom looking fit except for the center rear seat. The covers are a little too thick to tightly close he cup holder to make the center seat.

It is a little difficult to secure some of the bungee straps at the bottom of front seats. My truck had storage in rear seats but these covers do not allow to access them once installed. BUT, I was able to get set installed and this RC set was about 1/3 the price of the perfect fit ones.

The seat covers are great. I did some searching to find ones that actually fit and these are it. Overall really like them. The fit and finish is great. Two downsides; no instructions, installing the rear seats without removing is impossible (mine do not fold down) and my only “complaint” is the center arm test cover really doesn’t fit well.

It’s a hair smaller than the actual center console lid but I got it on and it’s serving it’s purpose. I would purchase these again and recommend them to anyone looking for a sturdy cover. I’ve only had them a few weeks so longevity is yet to be seen but they seem pretty well constructed.

Don’t purchase this if you have a new JL. Product itself seems solid except for the fact that A. It comes with no instructions and B. The clips for the bottom are ridiculous difficult to find a place to install.

All this aside, it does not “appropriately” fit the JL. If it was a $20 cover it wouldn’t be a big deal, but the cloth is so mismatched to the dimensions of the JL seat that for $100 it is completely not worth it.

I bought this tan seat cover a few months ago and it’s one the best decision iv made for my jeep. Tactical pouches come with it and I dont know where or what to put in them, so many decisions lol. I recommend it to any one.

Its comfortable too. Firefighter Army veteran.

Every time I open the rear passenger door I take a moment and just admire these seat covers. They look so good in my JK and I feel great owning them. The variety of storage is very convenient. They fit well on my seats and have great material quality.

Best purchase I’ve made and recommend these cargo seat covers.

In order to put the backseat cover on, you MUST remove the backseat from the truck. The directions says its optional, but trust me, it’s not. You cannot get the straps secured at all behind the upper portion if the backseat.

And if you manage to get one secured, you cannot tighten it. The bottom seat cover you can install without removing, but the back portion is impossible to do it properly. I bought this kit specifically for the backseat covers because I have leather seats and two kids, so I want to protect my seats.

So right now only the bottom portion is installed, better than nothing but still very, very disappointed. 2016 Ram 2500 Laramie.

These seat covers are awesome. They are well built. They fit like a glove. They are a little rough on installing them. So be patient when doing them. It took a little over a hour to do. The hardest part, is getting the velcro ends tucked in between the seat and back.

The seat and back is really tight. It is not really easy. And the velcro will stick to the seat. I found that I put duck tape on the velcro helped it from sticking to the seat. I got one end tucked though were I can grab it with pair of pliers to pull it though.

It is better to put the back on first. That way you are not fighting with the clips on the seat covers. The clips are hard to put though too. Just take your time. I’m 100% satisfied with these covers.

They look like they are factory seats. The quality and thickness is great. The thickness is maybe the only thing that might be a problem. Is after you get them on the back seat. When you let the seats down, The seats are pretty snug with each other when putting back up.

So you have to push a little harder to lock them. I can live with that for the quality these are. Well worth the money.

It takes a bit to install the front covers but the nice tight fit is worth the extra work and look great. I have a bit of arthritis in my hand and I was still able to install in about 90 minutes. The back seat cover only takes about 10 minutes to install though.

Covers appear to be well constructed and thick material. I expect these will last for a long time. I’m very pleased with my purchase.

I’ve had my Jeep for a while, and I’ve kept the interior as clean as possible over the last 13 years, but there’s bound to be some wear and tear as an everyday driver. These weren’t a needed purchase, but I’ve recently been upgrading my ride, and these covers really made a huge difference.

The neoprene material itself feels nice to the touch too. The covers aren’t exactly cheap, but if you’re looking to make an interior change, these are something you might want to look into.

These seat covers fit my 2017 F-150 XLT perfectly. They are exactly what I was looking for. They feel like very good quality covers. Once installed you don’t even notice that they are seat covers. If you look really close you can tell obviously, but at first glance they just look like they are part of the seat! They were moderately easy to install.

The directions say you do not have to remove the front seats if you prefer not to. I did remove the front seats because it made it much, much easier and faster. I am very hard on my truck seats so these covers were absolutely worth the costs.

Over time I know I will destroy them, then I can replace them and my original seats will still be in mint condition! Plus, I have a grey fabric for my original seats and the black makes the inside of my truck look much nicer!.

I want to start by saying I’m very disappointed. I’ve bought rough country for awhile now. That being said I work construction and needed something to save my seats. I decided to go with these covers, wrong.

Not only can you not get any water on them when you reach out to customer service the person just tells you everytime you get water on them you need to unclip the 6 clips everytime from each one to dry it.

Makes sense right. Not really. I don’t really understand how a seat cover should need to be pulled off everytime it gets wet. After a heavy rain storm I got in my truck and it got wet and after that my truck smelled of mildew from the seat cover holding water in it.

Never again will I ever purchase these. Also customer care was no help at all actually the total opposite with the remarks that made.

I waited to review these seat covers until I had used them for a while. I’ve been riding on them for a couple of months. They have a precise cut and design that fits snugly and considers the air bags, seat belts, and latch straps.

They don’t slip on the seats as you enter or exit. The neoprene material has resisted a spill and is easy to brush off dust and other debris. I wouldn’t expect them to resist burns very well but I don’t know.

They are strapped tight from underneath but the straps are very visible when the rear seats are folded up. That may be the case with all cover designs. The fronts look like factory seats and straps are concealed.

They were some of the least expensive covers that I looked at. (by a lot) I would recommend them at twice the price and they would still be less expensive than many others. I’m very satisfied.

This is a great product. A+ quality material. Easy install. Overall good fit. Looks nice. Great seat protection, waterproof = stainproof. Overall, I’m very pleased with this product. I would definitely recommend them.

Wanted a set of seat covers for a hunting trip in far SW Texas. Was worried about cactus thorns tearing up my seats and this truck is my daily driver. These were perfect. The canvas material is not too much different from my briar chaps and covered everything they needed to.

Only took about 20 minutes to install, in the dark. The headrest covers were really tight and hard to get on (very, VERY tight). Almost gave up on those as that was not what I really needed these for.

The seat portion went on easy. I’m a bit concerned about the strap underneath the bottom of the seat due to all the extra stuff underneath (I have the 8-way power seats). They are not fit like a glove sized but pretty close.

I got back late from my trip and haven’t had time to take back off. No problems or comfort issues sitting in rush hour traffic either.

These seat covers are great, once you get them installed. Ignore the install instructions that come with the covers or the videos since they will be zero help to you for anything older then 09. Well see how well they do over time.

The fabric should last a lifetime. It’s the velcro connection points I feel will fail over time. The new model Ram covers have multiple clip points that will forsure keep things tight and in place. The older models 08 and older use just a single holding point and that done by a 1/2″ x 3″ strip of velcro on the back side.

And the velcro isnt industrial strength. Overall the look is great, fit is somewhat perfect. Again not as perfect as newer models. I’ll update this review down the road after I’ve given time to use them.

Overall, the product looks pretty good. Online was a little hard to work with. I ordered 2012 Dodge Ram seat covers and they insured that they were compatible with the vehicle, but the bucket seats didn’t account for a back flap on front bucket seats.

I made them work, but wish they were a perfect fit. They look really nice though, and my son is very happy with his Christmas present.

Extremely easy to install. It took longer to remove the old seat covers than it did to install the new ones. Great fit and on the seats and the center console. I was worried that the center console covering would not fit, because the old one didn’t.

The center console cover fits and looks wonderful. I waited to see how well the front seat covers would look and fit before ordering the rear seat covers. Just ordered the rear covers. Well worth the price.

It will take about a month to recieve your order so be patient, it’s worth the wait. The seat covers were easy to install, just watch the youtube video. The arm rest installation instructions were vague but I was able to figure them out.

They look fantastic. Very soft. They dont look like seat covers at all. I wished I had ordered back seat as well.

Have a 2003 Ram 1500 ST. Seat was totally worn out. Looked awful and was very uncomfortable. Ordered new foam piece; and a new cover from these folks. The color match was amazing and the fit perfect.

Made the interior look brand new again! Very easy to install also. As you can see by the before and after pictures its an Amazing transformation Very Happy.

Received this a couple weeks ago. Checked the color and quality out of the box and everything looked great. Got around to finally installing in my truck yesterday. Removed the four bolts to remove seat and install was easy.

Not as many clips as the original but without use it appears to be sufficient. Was a little disappointed when my wife pointed out the carpet on the seat was black and the truck carpet is grey. Think with the supplied VIN number it would have been correct but seat was totally installed.

Other than that I’m pleased and will see how it holds up with use.

Called dealer originally on the seat base cover replacement. Retailed over a grand w my cost 650 Canadian. Half the price from this company and fits excellent!! Highly recommend

I don’t know why it claims that it won’t but it fits my 2007 Charger perfectly. I’ve had them two years and only have one small tear after daily use. I was searching to see of they’ll fit my Durango which is what led me to this review.

It also claims it won’t fit the Durango too, we’ll see though. They are a little hard to get tight on to your seat but they are very comfortable and look great.

Bought these for a 2005 Ram. Easy to install. The back does not fully cover the seat toward the top as it tapers and they slide when I get in. It seems I am always repositioning them when I get out. They may work better for other seat applications, just not mine.

They fit my 2018 Dodge Charger front seats. They fit snug and I can still feel the heat n cool functionality through the seat as if they are not there. Can be easily cleaned as well. Great quality and easy to install.

I bought these brown Covercraft Carhartt seat covers for my 2011 JKU Call of Duty Rubicon. They were easy to put on, look really great and I can tell they will wear like iron. They look a little rumpled but that’s okay, just snug them as much as you can.

I have been meaning to buy these for quite some time, so if you are on the fence, go ahead and get a pair! I am very pleased with my purchase and Quadratec got them to me quickly. I recommend these seat covers to everyone with a new or older Jeep.

These are just the protection I wanted for my leather seats, water resistant and easy to install or remove! I am very pleased with them. A Big Thanks to the Quadratec Team, I returned and was refunded for seat covers I had previously ordered but did not use.

I was able to easily us my refund with assistance from the sales staff and they shipped these out immediately!.

The covers came very well packaged and damage free, so that was a good start. Unlike my usual habit I actually read the instructions and they were so generic as to be of very little value. That didn’t stop me though.

I fought with the covers until I had them installed properly and they look great. I love the color contrast which mirrors my truck exterior. Yes, it was worth the effort, all 3 hours!!.

The Fia Leatherlite are actually made for each model so they are an excellent fit. They look great except for the headrests(not as tight a fit- baggy). I only purchased the covers for the front seats.

It was a little work getting them on and the instructions are generic to every model, but I found a video online that helped. My only complaint is that they look like they are faux leather material all the way around, but the bottoms and backs are just a regular black cotton/polyester fabric.

I could not find a back set cover that worked without hassles, the seat is one piece with only the back folding down, until now!! The PetSafe Happy Ride Quilted Bench Seat Cover, is made with padded heavy cotton twill fabric, leather headrest straps and heavy-duty zippers, it’s waterproof, measures 45 inches long by 56 inches wide, and is machine washable.

This cover is easy to use; by just securing the leather head straps and seat anchor tubes in place and use the elastic panels and lower straps to keep the cover snugly fit to your car seat. T The Happy Ride Quilted Bench Seat Cover is quality made.

In my opinion I feel the leather head straps are an added bonus they don’t stretch or become loose from the weight of the dog, the stretch bottom panels hold tight to seat, when my large dogs enter and stays in place.

There is even a quick start guide included, with photos and instructions, to aid in the installation. I’ve recommend the the PetSafe Happy Ride Quilted Bench Seat Cover to my fellow rescue dog transporter’s, they love how easy it is to install and remove for disinfecting.

Love the quality of the fabric, thick and cushy, but tough like a light canvas. Black mesh bottom keeps the cover from slipping around on the seat. Not waterproof, but will protect my leather seats from scratches, hair and dirt/mud.

Super easy to install! Took 5 minutes. Will be easy to take in and out if needed. Fits my 2018 Nissan Murano. Almost thought it was a little too small, but once I adjusted the straps just right it fit perfectly.

Once adjusted right you are able to get the straps to fit under your seat corner so they don’t pop off. I’m not using the Velcro seatbelt holders as I don’t want it to fray my seatbelts over time. But it stays up just fine with the other headrest supports.

Very nice, attractive leather button holes, look really great. The seat anchors popped right into my seats to hold it in place. Nice zipper openings if you need to use your seatbelts. I got the olive color, it’s a great color with my black interior.

This cover looks and feels quality. Worth the extra money.