20 Best Sealer For Burnt Wood (2023 Updated)

Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.

May be applied using sprayer, roller or brush onto the woods surface. Requires no back brushing and will never leave runs, laps, or streaks. Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.

Requires no diluting or thinning prior to spray applications.

Formulated for application over bare wood. Seals wood grain and is easy to sand. Designed for use on unstained, bare wood, floors, furniture, doors and cabinets. Can be topcoated with any Minwax oil or water based polyurethane finish.

Quick dry-allows for sealing & topcoat in 1 day. Coverage: 125 sq. ft. per quart.

Provides a durable hand-rubbed lustre with all the benefits of tung oil protection. Penetrates deep into wood to bring out true richness and vitality. Resistant to spills and water spotting. Covers 125 -150 sq.

ft. per quart.

Protect your interior wood projects and keep them looking beautiful when using Minwax Polyurethane Wood Finish. This oil-based clear sealer protective coating protects and adds long-lasting beauty to woodwork, furniture, doors, cabinets and floors.

It’s one of the most durable coatings for wood protection against scratches, spills and more, and is a clear coat. It can be used on both finished and unfinished wood projects, and is available in a variety of sheens.

The fast-drying formula allows for quick recoats in 4-6 hours.

Stains, seals, and protects in one easy step. Produces a warm, natural hand-rubbed appearance. A penetrating oil that soaks into the wood and protects from within; will not crack, chip or peel.

Minwax polycrylic protective finish is a protective topcoat for use on interior wood surfaces including furniture, trim, doors and cabinets. It can be used over bare wood and both oil-based and water-based stains.

Polycrylic can be recoated in only 2 hours. Minwax polycrylic resists damage from abrasion, scuffing, chipping, water, alcohol and other common household chemicals.

Ideal for use on a variety of indoor wood surfaces including bare, stripped or sanded not recommended for floors Low VOC, oil-based formula of blended oil & varnish penetrates deeply into wood pores for ultimate protection Dries to the touch in as little as 6 hours and covers up to 85 sq ft Watco Danish Oil Wood Finish stains, seals, and protects in one easy step to produce a warm, natural hand rubbed appearance.

Simply brush or wipe on and wipe off to allow the penetrating oil to soak into your wood surface and protect from within. Offers superior performance on tight grained woods.

The sealer of choice Protects against end grain checking. Protect your wood investment. Nearly 30 years of experience in making this product.

Formulated to work best as a first coat, because it is easy to sand. It also seals the wood with one coat. Speeds up finishing because it dries fast. One coat will seal hardwood, softwood, plywood, particleboard and Masonite.

Non-toxic when dry. Brushable. Dry in 30 minutes. Ready to sand in 1 hour. Covers 400 – 500 sq. ft. per gallon.

Provides a tough, flexible, long lasting finish for maximum protection and durability on exterior and marine wood exposure. Has excellent flow and self-leveling properties. Contains an ultraviolet absorber to protect against the harmful rays of the sun.

Use on siding, patio furniture, railings, exterior doors, wood boat decks, and trim above the waterline. Commonly referred to as liquid plastic.

A quick drying sealer which provides an excellent base. This formula does not contain harmful petroleum solvents such as toluene and xylene. A lacquer-based clear sealer and finish that dries to a soft sheen.

It is specially formulated to work with any Mylands finishing product or by itself. A brilliant high gloss finish can be achieved on turnings when used in conjunction with a high build friction polish or a rich matte finish when the waxes are used.

This product does not contain shellac.

Made from naturally occurring plant and mineral extracts, this wood preservative penetrates wood fibers to provide protection from sun and water. A single application results in a long-lasting, maintenance-free surface.

Will not wear off, peel or fade; treated wood develops a beautiful patina. This plant- and mineral-based formula is based on a special family recipe and has been used on marinas, houses and decking for 60 years.

Epifanes Woodfinish Matte provides a beautiful, rich, UV protected, matte finish for all fine hardwoods, giving years of exceptional protection. For interior or exterior use. Epifanes Woodfinish Matted does not require any sanding between coats, if they are applied within 72 hours.

An additional coat can be applied after 12 hours for fast build. From Bare wood, finest results are obtained by applying this finish over a build-up of three coats (interior) or five coats (exterior) of Epifanes Woodfinish Gloss or Epifanes Clear High Gloss Varnish.

Note that although the name of the product is “Woodfinish Matte – Satin Sheen Finish”, this product provides a matte (flatt) finish with very little or no sheen. This has been acknowledged by Epifanes Canada.

This new product replaces below ground wood preservative. Multipurpose insecticidal wood preservative pre-treatment for exterior below ground contact, fresh-water contact and above ground applications.

Prevents attacks from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. Anti-wicking property resists moisture absorption, controls warping, swelling, and end checking.

Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Water-base formula. Covers approximately 200 sq ft to 350 sq ft per gallon.

Specially formulated to provide a fast dry, easy to sand initial sealer coat on any lacquer finishing project. Formulated to work best as a first coat, because it is easy to sand. It also seals the wood with one coat.

Speeds up finishing because it dries fast. One coat will seal hardwood, softwood, plywood, particleboard and masonite. Non-toxic when dry. Brushable. Dry in 30 minutes. Ready to sand in 1 hour. Covers 400-500 sq.

ft. per gallon.

Finish : Burnt Hickory;

Very tough clear wood finish. Resists cracking, checking, peeling, and yellowing. Protects wood from water, salt air, sun damage, and atmospheric pollution. Ideal for patio furniture, exterior doors, bar tops and wooden boat surfaces.

Covers approximately 400-500 sq. ft. per gallon.

Natural Clear Transparent Waterproofing Wood Finish is ideal for decks, fences, siding, and outdoor furniture, where a clear or wood-toned finish is desired. Its penetrating formula with water clean-up provides durability.

Also easy application.

Quart ideal for exotic hardwoods such as teak, rosewood, or mahogany. Produces a warm golden glow on all wood types. Even color coverage for both interior and exterior applications. Gives mildew and water resistant coating.

UV protection.

BEHR Premium Transparent Waterproofing Wood Finish is a penetrating oil-based stain that beautifies and protects your exterior wood surfaces. This product can be used straight off the shelf as a clear finish or tinted to a range of popular exterior colors and is ideal for both horizontal and vertical surfaces.

After application, this product will resist rain after 4-hours which provides project flexibility during unsure weather conditions.