18 Best Screws For Trex Decking (2023 Updated)

Hillman Star Drive Deck Screws feature a star drive style and are great for a variety of applications. Star drive helps transfer torque and prevent cam outs. Self-drilling cut point. Flat head with countersinking nibs.

Coarse/serrated thread. Provides superior rust and corrosion protection. 5 lbs Size: 2. 5″ x #10 Finish: Tan Star drive Self-drilling cut point Flat head with countersinking nibs Coarse/serrated thread Provides superior rust and corrosion protection For use in a variety of applications.

Quantity: 395 count.

Start your DIY decking and paneling project with this pack of Power Pro star flat-head exterior wood screws. The countersinking nibs lock into wood firmly to deliver a flush finish, while the Bore-Fast thread sinks into wood aggressively for quick driving.

A no-split twist shank removes debris and dust, minimizing pressure on planks of wood to help prevent cracking and splitting. These Power Pro star flat-head exterior wood screws include a Pro-Stik T-20 bit, which fits in the star drive head securely for smooth installation.

Start DIY decking or fencing projects with this pack of Power Pro flat-head exterior wood screws. The included Pro-Stik Torx T-25 bit allows smooth installation, while the countersinking blades beneath the head bore into the wood, delivering a neat flush finish.

A bronze ceramic coating prevents corrosion and rusting for durability and a no-split twist shank helps minimize cracking and splitting. These Power Pro flat-head exterior wood screws have sharp points, which penetrate wood easily for fast building.

Power Pro premium wood screws are designed to provide simple solutions for your interior wood projects. These screws are made of zinc and yellow dichromate, with a no-strip star drive, countersinking blades and no split twist shank for a more controlled drive.

No pre-drill is required. Packaging also stacks neatly for easy storage and organization.

Fascia Screws are part of the Deckfast Fascia System – the right way to install composite deck fascia boards. The system is approved by leading decking manufacturers. The Fascia Tool (sold separately) is used to pre-drill and countersink an oversized hole to accomodate the large amount of expansion and contraction that can occur with composite deck fascia boards.

Fascia Screwsare available in 16 colors to match leading deck boards and are made from grade 305 stainless steel, which provides excellent corrosion resistance.

We have ranked among the top 100 most recognized brands in the world and is known as the place with the innovative hardware people. With the continued vision to be the best, most helpful hardware stores on the planet, Ace Hardware and its retail associates remain dedicated to the core value of quality for its customers.

Features Strip-out resistant 20 TORX ttap drive system. Head painted to match board. Corrosion and fade resistant. Spotter Installation Guide creates consistent board gapping and fastener placement. 75 Per Box.

Specifications Length: 2-1/2 in. Drive Style: Torx TTAP Head Type: Star Head Finish: Zinc. Material: Carbon Steel. Container Size: 75 per box. Self Tapping: Yes. Color: Spiced Rum Thread Type: Coarse For PVC, capstock and composite decking.

Country of Origin: Taiwan. Weight: 0. 9 lbs.

Cortex Concealed Fastening System for Trex Decking is a fast and easy way to conceal fasteners and screw heads when installing Trex decking boards. The FastenMaster Cortex box includes everything needed, including 224 screws, 300 plugs and 2 setting tools.

FastenMaster recommends installing with an 18 volt cordless impact drill. How many fasteners are needed? Horizontal trim boards less than 12″ wide, use two Cortex fasteners at every framing member – rafter tail or wall stud.

The screws should be 16″ OC or closer. Vertical trim boards (i. e. , next to a door or a window), use two Cortex fasteners every 16″ OC or closer. If a trim board is 12″ or wider, use three screws. Each trim board must be fastened within two inches of the end of each board.

Note: Predrilling is not required throughout the majority of the project. Predrilling is required when fastening within 1/2″ of the end of a board and at mitered joints. Use a 3/16″ drill bit for predrilled pilot holes.

Trex approved Fastener- (Great for all composites) Use T20 bit and conveniently packaged in a reusable bulk container of 350 piece count. Head color is Redwood and Includes one Free Bit-Inch. Designed to handle the toughest composites, wood, PVC and any decking application.

The trilobular shank gives the fastener a quality easy drive. Also, the reverse threads are designed to eliminate composite mushrooming-Inch leaving all applications with a professional smooth finish.

Color coated pancake head fastener with an extra sharp drilling point to eliminate predrilling. Approved fastener for Trex Transcends and Enhance lines, but works wonderfully in all composite and decking applications.

Color matched E-Coat finish has shown over 1000 hours of corrosion resistance in both salt spray testing and treated lumber. Comes in additional 16 colors to match most composites on the market today.

Each container will complete approx. 100 sq. feet of decking on 16-Inch centers.

GRK’s R4 Self Countersinking screw has 6 self-contained cutting pockets which act like a router and transport the drill dust away from the edge of the screw hole. They also widen the countersink hole only around the head shape.

The screw head top closes the hole exactly,leaving no damaged fibers around the wider area of the head. The R4 head design is so effective that it will not crack even the most brittle materials.

Trex approved Fastener- (Great for all composites) Use T20 bit and conveniently packaged in a reusable bulk container of 350 piece count. Head color is Redwood and Includes one Free Bit-Inch. Designed to handle the toughest composites, wood, PVC and any decking application.

The trilobular shank gives the fastener a quality easy drive. Also, the reverse threads are designed to eliminate composite mushrooming-Inch leaving all applications with a professional smooth finish.

Color coated pancake head fastener with an extra sharp drilling point to eliminate predrilling. Approved fastener for Trex Transcends and Enhance lines, but works wonderfully in all composite and decking applications.

Color matched E-Coat finish has shown over 1000 hours of corrosion resistance in both salt spray testing and treated lumber. Comes in additional 16 colors to match most composites on the market today.

Each container will complete approx. 100 sq. feet of decking on 16-Inch centers.

Cortex Concealed Fastening System for Trex Decking is a fast and easy way to conceal fasteners and screw heads when installing Trex decking boards. The FastenMaster Cortex box includes everything needed, including 224 screws, 300 plugs and 2 setting tools.

FastenMaster recommends installing with an 18 volt cordless impact drill. How many fasteners are needed? Horizontal trim boards less than 12″ wide, use two Cortex fasteners at every framing member – rafter tail or wall stud.

The screws should be 16″ OC or closer. Vertical trim boards (i. e. , next to a door or a window), use two Cortex fasteners every 16″ OC or closer. If a trim board is 12″ or wider, use three screws. Each trim board must be fastened within two inches of the end of each board.

Note: Predrilling is not required throughout the majority of the project. Predrilling is required when fastening within 1/2″ of the end of a board and at mitered joints. Use a 3/16″ drill bit for predrilled pilot holes.

Engineered for optimum performance in multiple materials, Power Pro One screws are the One screw you’ll ever need. Developed to outperform and replace standard wood, sheet metal and concrete/masonry screws, the One screw program simplifies your toolbox by using a single, innovative, engineered screw design to satisfy projects that fasten into wood, metal, concrete, drywall and plastic.

The bronze epoxy coating is recommended for exterior projects and treated lumber. The flat head design and star drive provide easy and clean countersinking into wood. Manufactured with spiral flutes, serrated hi-lo threads and a three-sided pyramid point, no pre-drilling is required in wood, drywall, plastic or metal up to 20 ga thick.

Concrete and masonry applications require a pre-drilled a hole. Each package includes a free durable Pro-Stik star driver bit.

Power Pro premium exterior deck and wood screws feature a no-strip star drive, countersinking blades, no-split twist shank and no pre-drill, bore-fast thread. Power Pro premium exterior deck and wood screws include a limited lifetime assurance against rust and corrosion.

The fastener coating is assured against corrosion in cedar, redwood and treated lumber for the life of the project. Common project applications include remodeling, fencing, storage assembly, cabinet assembly and framing.

GRKs R4 Self Countersinking screw has 6-self-contained cutting pockets which act like a router and transport the drill dust away from the edge of the screw hole. They also widen the countersink hole only around the head shape.

The screw head top closes the hole exactly, leaving no damaged fibers around the wider area of the head.

GRKs R4 Multi-Purpose Framing Screw has 6 self-contained cutting pockets which act like a router and transport the drill dust away from the edge of the screw hole. They also widen the countersink hole only around the head shape.

The screw head top closes the hole exactly, leaving no damaged fibers around the wider area of the head.

Hidden deck screws for any board. Hide your deck screws with the CAMO MARKSMAN system. Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners.

Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking.

Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place.

Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place. Edge Hidden Deck Screws are easy to install using either the CAMO DRIVE system or the Marksman system.

Available in PROTECH exterior coating and 316 stainless steel.

Hidden deck screws for any board. Hide your deck screws with the CAMO MARKSMAN system. Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners.

Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking.

Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place.

Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place. Edge Hidden Deck Screws are easy to install using either the CAMO DRIVE system or the Marksman system.

Available in PROTECH exterior coating and 316 stainless steel.

Cap-Tor xd screws are specifically designed to provide a clean, smooth and uniform finish in PVC and composite decking. They also work equally well in traditional composites. Cap-Tor xd is approved for use with all major PVC and Composite deck brands.

Cap-Tor xd screws feature extra deep star drive recesses, undercut heads, reverse threads, tri-lobular shanks, Type 17 auger tips, and are available with either a color matched, epoxy-based polymer resin coating or in color matched Headcote stainless steel (both Grades 305 and 316).