20 Best Screen Protector For Surface Pro 4 (2023 Updated)

This is my second time purchasing this product, and I have been very impressed with it. The directions are clear and it is easy to apply. As far as I can tell, the product does a good job of protecting my screen.

Very little scratching and no cracks after over a year of use and no other screen protection beyond the liquid glass. Registering the product for the warranty is also very straightforward. Thankfully, I haven’t had to file a claim yet, so I don’t know how that process will go, but overall very satisfied with the product.

The product was easy to apply and I like how smooth the phone screen is now. Stays clean, no smears on the screen or bubbles like older screen protectors. I would give the product itself 5 stars the reason for 4 stars is because the Registration was not easy.

Had I not spent $1200 on my phone, I wouldn’t have submitted the warranty. I’m not phone savvy so I struggled to submit what is required for the warranty. Would I buy this product again? Absolutely.

Just bought the Luvvitt liquid screen protector for my Samsung Galaxy S10 phone. Absolutely impressed with this product. I have used liquid screen protectors before on my iPhones and have had wonderful results.

The Luvvitt screen protector is super easy to apply and there is more than enough for the entire device. Plus the warranty is exactly what I needed for my new phone.

Dont waste your time. I tried to install and reinstall so many times it was so dust dirty I finally gave up and pitched it. The website claimed that if you hade a problem that they would send me a new one – no charge.

That proved to be a challange because thier protocall required that I still have in my possession the faulty screen proector which I did not have anymore. $29. 99 down the drain! I realized that my request was going no where and I finaly gave up and bought a 2 pack screen protectors at Wallmart.

$14. 99 for a 2 pack what a deal. I own 3 of the cases. Great product but the overpriced screen protector is a bust. Save your money and head to Wallmart PS. My other to I pads have the Wallmart glass on them and I have never had a problem the them.

As far as I’m concerned, the screen protector for my new ipad was a mistake. It did not fit correctly in the provided frame and failed to install correctly. The Company provided me a one time replacement and basically the same problem happened.

It slipped out of the frame and never got seated correctly. The bubbles that did form were too close to the edges so my iPencil did not work correctly. When I followed the instructions to lift it and then smooth the glass shattered.

I honestly believe that the case I bought from them, which is fine, and the screen glass just don’t work well together. Not worth the expenditure.

Very well made of quality materials, Perfect fit. Seems to protect the ipad very well wchich is the main function of the product. Convenient, magnetic back side for attaching to large metal objects such as a refrigerator while reading recipes.

Secure, multi angle stand for laptop use. The main drawback is that when the case is open, the cover itself, covers up the camera and makes it akward to take pictures. you need to have the cover partially open and kind of flapping around so that you can control the camera and not cover up the lens.

I am actually astounded at the number of 4 star and 5 star reviews. If the kickstand is important to you then this case is a risk. This is an expensive case and I expected more longevity in function.

I have owned 3 of these cases in 4 years because nothing seemed to be better designed. ( I guess I’m a glutton for punisment, and I kept hoping newer versions would fix the design flaw in the kickstand that I decscribe below) This case is great in many ways.

It has nice sturdy protective shell. The stylus holder works beautifully, Good acces to ports and it looks good. HOWEVER, There is a design flaw in the kickstand. ( I DO NOT use my surface roughly or travel with it.

Im retired and I use it at the kitchen table a couple times a day) There is a cheap piece of plastic that guides and controls the opening and closing of the kickstand. Within 6 to 8 months the plastic on this guide piece splits and the kickstand will no longer hold the tablet up.

The tablet then flops open and drops. THE SAME EXACT FAILURE ON ALL THREE CASES. I received a warranty replacement 1 time, but 2x I was out of luck. Now I just prop it open on a pile of books. Still trying to find a high quality case with kickstand!.

This is an excellent case for your Surface device. I use mine at work in a factory environment that is quite dusty and dirty. I also wanted protection incase that I was clumsy and dropped the device.

Luckily that has not happened but I believe this would provide sufficient protection in the event that it was dropped. The only thing that may be an issue with this case is that it is quite heavy and adds a bit of bulk and weight to the very light Surface device.

That is not a bad thing if you are not worried about the weight. The added bulk does make it easier to handle IMO, but it may be a deal breaker for others. It’s still easier and lighter than carrying around a normal sized laptop.

The stand also works very well as the stand on the device is covered and unusable with the case on. There is a nice little strap to retain a closed keyboard position if you are using a surface type cover which works very well with this case.

The type cover completes the protection for the screen on the device while it is not in use. Overall I would recommend this case.

I upgraded my surface go to a surface pro. So I’m thinking I need to get a new UAG case because I liked the old one so much. Well what a disappointment that turned out to be. The new one did not have holes to diagonally mount the strap and the keyboard cover latch barely held the keyboard in place.

on my very first use I was climbing a ladder and the keyboard fell off, landed in a mud puddle and was destroyed. After a few more uses I decided I hated the thing hanging off both top corners so much I decided to make my own holes so I could hang it diagonal.

We that worked for about a week. The drilling of the plastic made the edges sharp so the cut thru the cord for the strap. I finally gave up and thru it in the trash.

The included square of cheap, thin microfiber cloth left a patch of smudges on my screen prior to application. Since putting the screen protector on, the touch response is very inconsistent. Sometimes I now have to either tap on something four or five times to get it to register or press down a lot harder than I had to before, more often than not.

The protection it offers is probably fine, but I don’t know how much longer I’ll want to deal with the lack of responsiveness. It’ll probably end up in the bin soon.

So far so good Second time I have purchased this screen protector. The first one is still on my old Surface! No cracks to be found. The employee who put it in did it right the first time and in “no” time.

I would like it to have been in stock and a little less expensive. I used my credit from my previous purchases that helped me pay for this specific one. I would like the protection at a less price for sure.

Seems to be doing the job so far. Only gripe is that it was kind of a PITA to install. Tried very carefully, but still ended up with a couple of small bubbles that would not rub out. Other than installation, I’m pleased.

The installation of the screen protector was easy and instructions were clear. I was worried about having this item shipped since it is glass, but the packaging is very sturdy, almost like a hardback book.

I found using the speakers on the Surface Pro 8 as the alignment point was the best way to get things perfectly in place. Getting the trapped air bubbles out with a guitar pick worked really well (though, would be nice if they included some kind of hard plastic piece to help get the bubbles out).

After installation of the screen protector I did not notice any difference in the touch interface of the Surface, using both my finger and the Slim Pen 2.

I choose to have the screen protector installed by store personnel. So, there’s nothing to comment except I recommend that choice. The screen is absolutely clear and a perfect fit. It also allows precise and accurate touch control.

I have previously used Zagg screen protectors yet believe that this SaharaCase screen protector is just as good.

It does the job in protecting the Surface screen. First shipment came in damaged. For the second, I had the Geek Squad install, but they couldn’t get bubbles out of the top two corners and around the camera.

So i seen this product and I think the packaging really is what caught my eye. But I also know when it comes to devices and screens I don’t have the best track record. So I looked at the reviews online & someone else told me they used the product and said they loved it.

Well got home and needless to say all my devices now have one on each of them. This stuff is amazing & I’ll never use anything else again.

I wasn’t really all that enthused to purchase this, thinking it was some hokeyish product, but am pleased with the application process and the new shine it has given to my iphone. The guarantee is good for up to $150 if your screen breaks so I’m in with that.

I’ll bet it works wonders for an apple watch too.

I bought this and applied it and have loved it as I feel protected and yet the phone feels light and sleek and not the feeling of a screen haze over it. I have dropped my phone twice that would cause issues and it held up against these.

I like it so much I removed my phone case. Great product!!!.

So far so good, didnt have any installation problem at all. Doesnt feel like glass at all,just a hard flimsy plastic, but definitely better than just a film or nothing.

Great products. Super easy to install with no bubbles!!

It’s easy to put on. Great quality!

Seems to affect the automatic screen dimming so the screen flashes and also the screen takes multiple taps to register touch now that the screen protector is on. Also I purchased the case and screen protector recommended by Best Buy with the surface pro x purchase but the case causes the corners of the screen protector to bubble so that’s frustrating.

Also not easy to put on but they never are.

Works well. Could be easier to apply to screen. Has one remaining bubble that will not come out.

Ordered screen protector in store and received item shattered. I immediately had doubts about the product. I returned it to the store and ordered another one. It arrived and I placed it on my Surface Pro X.

Easy to install and has been great since!.

Fantastic screen protector: I’ve been buying Zagg InvisibleShield Glass phone screen protectors for years, and they have never failed to protect my phone screen. The very first thing I do when I buy a new phone is to also buy a phone case and a Glass screen protector from Zagg, and install both *immediately*! I tend to drop my phone frequently, so an effective screen protector is a must for me.

With this product, when I drop my phone, it’s the screen protector that cracks instead of my phone screen. I also have never changed the screen protector, even after it’s been broken and cracked, and it still effectively protects my phone screen during drops and falls.

I thought about taking off one star for the combined con of it being ludicrously expensive (though it’s definitely worth the money, and I’d much rather pay this price than the $700+ for a replacement phone) and inexplicably inaccurate installation (ha, I swear that alliteration was unintended), but those aren’t important enough to warrant making this a 4-star review; it’s a 5-star product.

The installation is weird though. They tried so hard to make it absolutely fool-proof for a flawless installation, and they went through the trouble of creating hefty pieces of plastic just to make installation easy and perfect.

Yet somehow, no matter how much I cleaned the area and tried in vain to push the bubble out of the screen, one of the corners of the screen had a bubble that simply *would not go away*! Everything else is perfect, the placement is perfect, there’s no bubbles or hairs or anything at all anywhere.

except that bottom right corner. About 5mm of the entire bottom right corner is not adhered to my phone screen, and wouldn’t adhere from the start; this is problematic because I worry that with time, and sooner than later, the screen protector will simply peel itself off.

Considering how expensive this product is, I really don’t want that happening. Anyway, I do highly recommend this product; Zagg’s InvisibleShield Glass screen protectors in general are must-haves, and worth the money!.

I’m not 100% in love with this protector. I tried 2 off Amazon first, LK is what I used for 3 years in my Pixel 3a. It was ok, but had a lift off point at the top flange (they did 2 notches at the top sides) the left side never adhered to my screen but it wasn’t actually used display space.

The LK I ordered for my Pixel 6 had a few small air bubbles I never could get out and the glass held oil from your fingers rendering the fingerprint sensor unusable unless you wiped the screen first.

I threw it away after 3 days. This protector is a premium price 4 times what I paid for the LK. There is 1 tiny lift off spot on the left part of my phone. The lift off is about 1 mm wide and 4mm long on the top left portion of my screen.

It really bothers me since I paid $50 but it’s not causing any other issues so I won’t submit for a replacement for that. I didn’t even realize there was a killer lifetime of you owning the phone replacement warranty.

I picked this protector because you get what you pay for. The reviews I read on Google said this had a beveled edge that was invisible. Lies. It’s no where near as profound as LK, but there is a rainbow reflection on both sides and around the camera cutout.

I preferred LKs camera cut out being a circle just around the camera instead of leaving a gap unprotected at the top. But of course I could see that in the picture before I ordered. This glass protector feels great.

Top quality glass and the fingerprint sensor has still been fairly responsive even without the display settings changed to make it more sensitive. I wish the protector was a little larger. 2mm larger on every side, 1 mm larger on every corner it would still fit inside my OtterBox defender pro series case.

I don’t think you would have the rainbow reflection if it was a bit larger. Grey and black backgrounds don’t cause it but white backgrounds do. The case is edge to edge screen display coverage, with 1mm more than display coverage on the top and 2mm more display coverage on the bottom.

I haven’t contacted the company to see how easily the replacement works but if it’s super convenient and the company is responsive I’d bump this to 5 stars. And I would subtract stars if they make getting the replacement agonizing and ignore messages for weeks on end, then I wouldn’t recommend this I’d recommend saving $40 and getting a 2x or 3x pack from Amazon.

This protector feels more like the Pixel 6 screen than the LK.

I really wanted this product to work since it is quite a bit more expensive than the usual screen protectors. It was fairly easy to install; however, there was an item included that was not mentioned anywhere in the instructions.

Too bad I only figured out what I was supposed to do with it after the fact. At first the protector was great; but then some bubbles started appearing on the sides. No matter what I do I am unable to remove them.

I am a bit upset with my purchase as I could have bought 2 sets of screen protectors (with each having 2 or 3 shields) for the same amount of money that I paid for one shield. I believe I will contact the seller to see if I have any recourse in this matter because I don’t want to be without a screen protector.

If I am unable to get a replacement shield I will be pretty unhappy since I used a $30 Rewards Certificate plus had to make up the difference with cash. Another problem (in my estimation) is that only ONE shield is included so if you muddle up the installation you’re in big trouble.

I got the shield installed without too much trouble because there are tabs at the top and bottom to help get it centered. However, bubbles appeared later and that has allowed dust, etc. to get under the shield.

Right now I am not a happy camper. I intend to take my phone into Best Buy the next time I am in the vicinity to see what, if anything, can be done.

I love iPhones. But this is the first time I have upgraded from my iPhone 6+. I was so worried that I would miss the button feature. And also worried about facial recognition. As you can tell I am a senior citizen – change is hard.

But after reading all the background information I could find on the iPhone 13 Pro Max I, I decided to jump in with both feet. I am sooo happy that I did. This phone is AWESOME. It’s easier to use and I love it.

The only thing was having to go back and reload all my passwords into my apps – that took a while. The battery lasts me 2 full days before I have to charge it up, that’s a plus right there. Sometime change is a good thing!.

I’m not sure how I feel about this filter. I put it on a brand new Lenovo X1 Carbon 6th gen, and this is the filter on the 3m website that is says to use. The screen protector is pretty much exact to the actual screen and basically sits on the screen in the bezel.

The bezel is really small on the sides so I had to use the slide in tabs which seem to hold it fine, but the clear plastic lip that holds the protector on does cover into the screen a little. It may become more annoying as time goes on.

It also has a little cutout dip on the top of the screen protector that leaves a little unprotected which makes it look weird right where the web browser tabs are. The privacy portion of it is pretty decent, and blocks the view well from the sides.

It does however seem to give a bit of a pixelated look too which is kinda weird. Not so impressed with the “high clarity”. I had another 3m privacy filter on my Yoga 900 and yoga 710 and those didn’t seem to get the sort of pixely look to it.

They also were taller protectors that used the blue sticky material on the top and bottom bezels (well it was was smooth glass to the edge but was black unused bezel, just one flush thing instead of the slightly raised bezel here) instead of the slide in which looked a lot better, but made for difficult cleaning.

Tempting to send this back and see if there is one that is the same width but taller by a bit so it could attach at the top and bottom. The model number thing that is pressed into the filter on the top right also covers and muddys up the look of open tabs or anything in the top right of the screen and you can read the 3m hc140w9b over where you have stuff on screen, which is lame.

With the taller ones on the other models that model # was in the bezel and didn’t matter at all.

Privacy screen works perfect with the MacBook Pro (13-inch, 2017). It’s a great addition, if required. Easy to adhere and stays on. Only issue is the screen is not meant to be removed and placed back on.

Not a huge deal but the option would be nice. Ultimately, that’s the reason for the four stars versus the five stars. Some reviews mention the laptop doesn’t close. This is somewhat true but not. The magnets that close the laptop don’t catch because of the privacy screen.

However, it will indeed close if you adhere the privacy screen on correctly. If it doesn’t close the first time you try, give it a couple more tries and leave it closed for a while first. This is a high quality privacy screen.

It gets the job done—especially in an office setting.

I rarely write reviews but was so satisfied with this product I felt leaving a positive comment would help the next customer make a decision to choose this one. The 3M privacy filter does exactly what it’s been designed to do.

As you can see, I have my computer turned on and from a side view of the screen it almost looks black. I was in a public place on my mac a few days ago and felt like those sitting next to me were able to see any and everything that I was doing on my computer.

I am a private person and felt that purchasing a privacy filter was necessary. If you are like me then you need something like this. The 3M privacy filter is thin, clear and clean looking. Read the instructions carefully before applying and you will be happy.

Did I mention that this cover is CLEAR!? It’s also great because it has blue light blocking technology and I don’t even have to think about it! The application is pretty easy, because it comes with a full kit to help you put it on perfectly, and so I was able to do it! Best Buy can do it for you but only on phones, not on iPads weirdly enough.

BUT you can do it, it’s even nicer for people who are a bit of a perfectionist! You can have it the way you want! without any dust! It works well! And since I have the same thing on my phone I know it would be in good hands with scratches since I’ve replaced it on my phone after dropping and it protects your screen from actually getting cracked.

I finally caved and bought one for my iPad because I dropped it and had to get a NEW iPad! Just because of the crack on the screen, but this time I know it will be a screen shield change should it happen again.

Great product!!! Nice benefits, easy application! Thanks!.

I got this Zagg InvisibleShield Glass Elite VisionGuard+ Blue Light screen protector for my new iPad Pro 11 2021 M1. I’m a huge fan of Zagg screen protectors and have the same class of screen protector on my iPhone 13 Pro Max.

The screen protector is less resistant to finger prints than the naked screen. And since we tend to spend hours staring at our screens, the Blue Light Filtering is much healther for our eyes. I’ve seen people complain about how large the cutout is on this particular screen protector.

I guess some don’t realize that on an iPad Pro, in particular, there are more sensors beyond the True Depth camera, which is broader than previous devices. All in all, it may be pricey, but oh so worth the price of admission to protect not only my iPad Screen but my precious eyesight.

Excellent product. Thicker than other brands, and these sport really nice, rounded edges. They cost a premium, but I’ve used use these ones specifically on all my high-dollar Apple iPhones and iPad Pros for years and not one has failed me yet.

Tip: if you ask the Geek squad to install them – wait around and browse until they are not busy, or go mid-morning thru the week when they are typically not busy anyway – they will, for free. And do a stellar job at it.

Mine have all turned out perfect over the years. The young lady that installed one of these today on my new iPad Pro said she typically installs 6 or 7 each day, and it showed. Took her literally 5 minutes and again, mine was absolutely perfect, no bubbles anywhere.

I was hugely impressed. These cost more, but they don’t break easily, so end up being a better value in the long run. And they look great.

Comes with a frame that perfectly aligns it on the phone. You can also lift it as much as you want to remove dust without damaging the corners. It completely covers the whole screen including the dynamic island and doesn’t have holes punched out for the front camera and sensors.

It’s also tapered on the edges so you can’t feel a sharp edge. Pretty much a perfect screen protector and well worth the price.

Definitely the right choice! The screen has an oleophobic coating meaning gone are the fingerprints. Matches well with any iPhone case. And fits edge to edge on the screen.

Easy to put on my phone and great price.

I purchased the first one. It developed a hairline break in it within 1 month. I when through the warranty process; which was a bit extensive considering I bought directly from Belkin. I got the new one.

Same result, about 6-7 weeks this time, TWO hairline cracks. My phone if fine, no damage. The PROS are the privacy aspect works really well. Also, the application of the screen is far and a above the best Ive ever seen.

The directions are kinda vague. Overall though I cant recommend this product due to how fragile it is. I do frequently sit on my phone while in my pocket. But, for 2 of these to break within 2 months of purchase is just too much.

Especially for $40.

Okay so I got the Belkin international Tempered Glass Privacy Anti-Microbial Screen Protector for my iPhone a couple weeks and this is the best protector & privacy screen I have ever used!! First I’ll start by say it was so easy to place on my phone and was 100% bubble free.

So once it was on I have to say it looked awesome and it really works. You can tell it’s made really well and I love the privacy accept and that you can change it! If you put your phone in portrait mode no one can read your messages or see anything on your phone even if they are sitting right next too! it’s incredible and works.

If you want to change his all you have to do is click your phone over from portrait to landscape mode and it’s like the privacy screen is gone and no one even knows you have it!!! This is literally the perfect phone cover not to mention it’s made with special material that rejects certain germs from hanging on your phone! It doesn’t get better than this.

I tried the Sygnett version first, the Panzerglass is much better. Looks good and complements the rounded case and crystal form of the watch by following a similar contour. Nice clear glass which makes the screen look nicer than the Sygnett version and also works much better touch wise (scrolling across to change faces for example and pretty much generally works better).

Smudges much less also. Resists moisture/condensation ingress better around the edges after rinsing or submerging in water (both dry out reasonably quickly, no need to remove the case). Button accessibility is better.

For two very similarly looking items, it looks so much nicer on the watch, the glass clarity also stands out. A really good product. I’ve only tried two but I reckon look no further than this one.

Great product! First case I tried and it fits well on my series 7 45mm with the screen not being obstructed at all. Easy to removed as I only use the case whilst at work. The case makes it a lil bulky on a 45mm but overall the black case on the midnight series 7 45mm is aesthetically good specifically with the leather band definitely recommend.

Best purchase ever. This is fantastic quality and easy to use the touch screen, unlike others. Would highly recommend it. Saved me many times! A++++

The protector is smooth to touch and covers nearly all of the front glass with a cut out for the camera. The matte texture makes the apple pencil feel less slippery, and there isnt much colour distortion compared to matte film screen protectors.

However, like other tempered-glass screen protectors, the apple pencil starts to wobble on slow-medium speed diagonal strokes. This can be worked around by using medium-fast drawing strokes. Also, the brightness of the screen seems somewhat reduced, but it is still plenty bright for my use cases.

You may also want to consider a magnetic screen protector, which I recently found out about, it can be removed and reapplied easily. Good product idea for those who want to temporarily add texture to the screen for writing.

This screen protector is of good quality and I am not afraid if it may break. It arrived in a solid case with bubble wrap which prevents the chance of it being broken or bent to fit inside the letterbox.

The appliance of it was easy and was easy to remove the bubbles (which is expected) when the screen was sticking on. The glue is strong which is what you need. It has been my best decision to purchase the anti-glare feature because I have not felt a strain on my eyes, I can comfortably do my essays on the iPad (which takes over 8 hours a day).

I am not having headaches (which would stop me from being able to do my work) I do not need to wear my glasses because the glare has been removed. I used to find that the text would blur sometimes before the screen protector even with the screen brightness on low but that has stopped since the screen protector.

There is also no issues when doing a digital drawing. This product is amazing and the best screen protector I have purchased. I do recommend it.

I was drawn to the idea of having a matte screen protector on the iPad Pro because the oils on my fingers interrupt smooth swiping motions on the super large display. This is easily the best matte glass protector I’ve purchased for a large tablet, with a really smooth and simple, bubble-free installation.

The one issue I would say that I have with it, is that after a while of use, if not cleaned, strange translucent lines appear throughout the product, and they’re not swipe-marks. All in all though, great value and super protective of the display from corner to corner!.

I bought mine at a great price. These are much easier to get on than the plastic flexible protectors. I lined it up with the tear off sheets and taped one side to the surface with strong tape. I then removed the tear off sheet and held it up with tape tabs.

Cleaned all the lint off the screen and set it down. Straight! Then you just press in the center gently and it adheres almost everywhere. Use a cardboard card and get rid of any remaining bubble. Best I have used to this date.

This product is awesome. It’s a little heavy so I know that it will really protect the screen. It was very easy to put on – I just peeled off the film and placed it on the screen and it stuck to it and left no bubbles.

The visibility is great and it has a nice smooth touch when swiping. I’m completely sold on tempered glass screen protectors.

You can’t go wrong purchasing a Microsoft product for a Microsoft product. This screen protector should have shipped with the Surface, for it fits it like a glove, and is much easier to clean than the glass interface.

No issues using the Surface pen on it either.

Very vague instructions for how to install. Kit included a useless plastic frame to help align the screen shield. It was impossible to use as prescribed. I should have followed the advice from video reviews and set it aside.

Totally useless plastic waste. Recycle it BEFORE using. Best to apply this product in a certified clean room or hospital OR because any microscopic speck of dust results in a quarter-sized ghost image on your screen.

No do-overs with this product. It’s a one-and-done chance to get it right without instructions. Better design and better instructions might result in a more useful product. At the current price point ($50+) this product is NOT RECOMMENDED.

BUY THIS for any of your tech. Seriously. We have this product for our cellphones, laptops and iPads. It is worth the money with just 1 replacement. Oh, didn’t know you had unlimited free screen replacements.

Betcha bottom you do. With 3 kiddos and a jam packed athletic and academic schedule, there are bound to be spill, drops and “oh CRAP” moments. Give yourself the piece of mind and buy this to protect your screen.

If it cracks or chips, simply fill out the claim form, they give you shipping label, mail it and you get your new one for free soon after. For cellphones, Bestbuy will do everything for you in house within 5-15 minutes (all depending on how busy they are).

AGAIN. BUY THIS PRODUCT! IT IS WORTH THE INVESTMENT.

I was a bit hesitant getting this as there were no reviews around for it, but really glad I did because it’s been amazing! I use my iPad for digital art and the paper-like texture of the screen protector really enhances the drawing experience for me as I don’t like the glass/smooth surface.

I find that I have more control of movements and strokes as well as it doesn’t feel too alienating when switching between traditional mediums and the iPad. The matte finish also reduces glare when working near light sources or outside.

Would 100% recommend this to other creatives :).

I didn’t think I’d like it, but it’s much better than expected. Feels like writing on paper with the Apple Pencil. It also doesn’t slip. Very happy

I regret this purchase, the screen protector is already off the screen its not even one month use. Dissapointed

Really easy to apply onto screen, sounds and feels really good when I take notes on the iPad

It was difficult to stick on and is coming off. Hard to squeeze out bubbles