20 Best Nissan Titan Seat Covers (2023 Updated)

Have not put them on yet. I thought Neoprene material was more of a rubber type. These are much more like regular fabric material but a bit thicker, the rubber is on the underside. Also the gray and black is more like a dark blue mixed with a aqua.

the black is fine just not the gray. Hopefully they fit snug and last longer than my faux leather ones , as for the headrest covers I will not be using them, My leather headrests are in good shape. My seats are a cloth material in the middle with vinyl on the outer and back, if these last a few years I can live the cloth material.

Product was easy to install. The material is thicker than I expected. But makes sense if it’s purpose is to protect from spilled drinks. The backside of seat cover is made of thinner material and covers the back side to the bottom.

Back side of cover also provides a pocket which is very helpful and well thought of. The seat covers feel comfortable and most importantly look nice!! Can’t beat this price!!.

It says it works with the center cup holder but it doesnt. It holds in the heat against your back and doesn’t feel breathable. Even after watching most of the videos it was not easy to install. Not easy to clean up.

Vacuuming is a hassle. I can see why they would say it is machine washable but I don’t think it would be worth trying to take it off to wash it.

It took me far too long to figure out how to take off my head rests, but after that, smooth sailing. I do admit, I did FAIRLY recently installed different seat covers on another vehicle, so I was familiar with the general process and how things worked.

The fit is great. I couldn’t be happier. Even my center console fits well. Past trucks, this piece never seemed to fit right. I even went without the one piece in my old tuck. This fits well as you can see.

Quality is still unknown as I just installed them. However, no tears or bad stitching out of the box. Everything stretched on nicely, and seems well made. All straps were secured nicely, and I tugged fairly hard on a few for the best fit.

I give it five stars for bang for your buck because I was looking for something not flashy/protect the seat/preserve the trucks value/and not overly priced. This seat cover seems to check all of the boxes.

Not too fancy or luxurious. but just what I needed and wanted. I would highly recommend.

No instructions. Rough Country web site has instructions, but are not very helpful without searching for YouTube videos. Back of rear seat has to be removed- YouTube post shows how. Rear headrests have to be removed -easier than the front- also YouTube video is available.

Front headrest has to be removed- check YouTube. I got a nice snug custom looking fit except for the center rear seat. The covers are a little too thick to tightly close he cup holder to make the center seat.

It is a little difficult to secure some of the bungee straps at the bottom of front seats. My truck had storage in rear seats but these covers do not allow to access them once installed. BUT, I was able to get set installed and this RC set was about 1/3 the price of the perfect fit ones.

Five stars. Hands down best seat covers I’ve ever seen. Straps are sturdy and in all the right places. Not that old junky tie on either, real elastic with hooks, and then two actual buckles. They fit tight, and have all the air bag relief like they should.

They tuck under the headrest trim like they should too. Just hands down great covers. I ordered them on a Wednesday evening and they got here Friday morning. Super fast shipping. Installed in like 20 minutes.

Looks good, feels good, works great. Thanks AmericanTruck!.

They’re darker in person than the photos seem to show, and dear god were they incredibly annoying to put on. I expected it to be tough but not like this. It’s probably been years since I’ve had my patience and sanity tested this far.

For installation, you have to fit one side of the clips through 2 metal bars in the seat that felt like they were less than 2 centimeters apart. Also, the velcro on one side kept sticking on the seat cover itself making it nearly impossible to get it through.

Once you’re done tearing your hands to shreds you will learn you have to wedge it open with something, then slide it through. But once they’re finally on and set up properly, dear lord are they beautiful seat covers.

Completely changes the look of any Jeeps interior to looking so much better, especially if you pair them with a tan steering wheel cover. They also keep the seat from tearing and do a great job of protecting it as well.

All in all 2 months in, they’re worth the price (pretty pricey) and sometimes you should spend a little more for nice looking things that are well made. I’d get them again, but would dread having to put them back on.

These fit great ONCE you get them on. The back seat cover was not too hard to install except I recommend cutting small slices on 4 sides of the headrest holes to get them over the headrest slots. If you don’t it will take forever to stretch them and they will rip a little anyway.

The front seat covers are another story. There isn’t enough room between the seat back and the seat itself to side the material through very easy. I barely was able to Velcro the drivers side seat back together.

Passenger side was a NO GO. Also, the straps with the hooks on them are useless as you cannot fit them underneath the seat where they are positioned. I ended up just clipping them to the back bottom of the seat on each side to get them out of the way and to provide some type of stability to the seat cover itself beyond the under straps.

Took over an hour to get these babies on. Good Luck! Also, the instructions are CRAP.

I liked the seat covers. They have a very thick neoprene material construction. They are definitely a high quality product. I have leather seats and wanted to protect them (front only for this item) when I take the top off the jeep.

These resist water but I do not think they are completely water proof. I just wanted something to keep the dirt and sand off of the leather. After getting them installed they were comfortable and stayed in place while driving both on and off the highway.

As far as the installation: I think the install would be much easier on cloth seats. The leather seats are much more firm and do not offer as much flexibility when you are trying to install the seat covers.

The seat covers have a very tight fit which is great so they don’t have wrinkles or move around. The tight fit did make the installation take longer. (worth it for good protection) One other thing is it was pretty much impossible to get the lower front flap of the top section with Velcro to fit in between the seat back and the seat bottom so I had to just fold it under.

It is meant to go under the seat back and velcro to the bottom of the back section. This is not possible with the leather seats because they have a curtain like fit in the rear of the front seats that hangs down close to the floor board.

This was minor for me due to wanting these seat covers only for temporary use each time. If someone wanted to install these permanently on leather seats I would maybe look into other options. Great product and got to me in 2 days!!.

First off, no instructions in the box made this an adventure. It would have been nice to know where exactly the bungee cord hooks were supposed to attach to, but guessing is more of the challenge. First off they are cheaply prices, and seem to be well made.

Some of the reviews here and other places when you search say you can put the covers on without removing the seats. Well, I found that to be complete BS. Unless you have GoGo Gadget arms,fingers,neck, and other parts that can be extended into cramped spaces and connect things blindly, you go boy.

I had to remove the seats. All together this process took about an hour. Front seats of the Tundra take a 14mm socket for the four bolts. The bungee cords will have to be extended to their max to attach to other parts of the seat and correctly pull the fabric around the parts of the seat and not bunch up.

I DO NOT LIKE THE FACT THAT THE COVERS FOR THE FRONT SEATS ARE ONE PIECE. THE LITTLE BAR YOU PUSH THROUGHT HE BACK AND THE SEAT SEEMS LIKE IT WILL NOT HOLD. The plastic clips on the nylon straps hold nicely when wrenching them down to tighten the cover to the seat.

I wish the entire thing could be this process instead of the bungee cord stuff. The bungee cords will last for a little while then be useless. The center console cover is a nightmare, the Velcro straps are ridiculous to say the least.

It will eventually go on and I guess do the job. Head rest covers were simple in their design and installation. On the bottom portion of the seat cover, the bungee cord hooks, you will need a metal hangar or other item to fish the hooks between the metal bars of the seat.

MAKE SURE TO CONNECT THEM AWAY FROM THE BAR THE SEAT SLIDES ON, OR YOU WILL POP IT OFF WHEN YOU MOVE THE SEAT. I connected the hooks to one of the seat springs, of course stretching the bungee to the limit to connect it.

The rear seat. Well he in lies the problem with not taking out the seats. Toyota has made it where the backs of the seat do not come down, and the half cover for the top has the ridiculous bungee straps with the plastic hooks that must be attached to something to keep the sides tight.

I was not able to attach these without removing the seats. THE REAR SEATS TAKE A 17MM SOCKET. Once the seats are removed the covers go on smoothly, the bungee cord hooks are a different story with being able to sides and bottoms tight finding somewhere to connect them is a fun challenge.

the bottoms go on with ease. Again, the nylon straps and plastic snap connectors should be used throughout. The larger side of the seat is an absolute bear to remove due to the size and weight, but you can do it! The cut out portion for the arm rest is quirky to say the least, but once you figure out how to stuff and tuck the material it works.

The bungee hooks are again a challenge to figure out where to connect, I FOUND CONNECTING THEM FIRST MAKES IT A LITTLE EASIER. The rear arm rest cover is a cover by definition, but once installed it makes the arm rest bulky and you have to force it into the rear top seat to make it flush again.

The hole cut out for the cup holders does not tuck in under the plastic cover of the arm rest, and I can not wait to see what my kids can hide in the cover. So far I like the covers, just wish the front seats would have been two piece so they would form to the top and bottom parts better.

The only instructions that come with the covers give guidance on how to clean or wash the covers. I can assure you that I will not be taking them off to wash and to have to reinstall the covers once dry.

The bungee cords will have no more use to them after a few months being stretched to their max. I will update the review once i Have had a few months with them installed. Hopefully they will hold up.

This is the only true form fit seat cover for 3rd Gen Tacoma’s that you can buy. The engineering design is unparalleled, nothing else is close. The materials Rough Country used to manufacture these are excellent quality and durable.

Wait until you get them installed, Toyota should offer these as OME seat protection, they would sell like crazy. I wasn’t sure what the would look like before I bought then, but since installation, I honestly think they rival the appearance of my stock leather seats.

Look sooo awesome! I purchased front and back seat covers and it took all of 35 minutes to install all the components. Installation was easy, and airbags, belt restraints and seat controls are fully accessible and functional.

RC could save everyone a minute or two, if they would mark the drive and passenger covers (however, you will quickly figure it out even if they don’t mark them). Save your seats! Save your time! And only have to buy one set of seat covers once! This is the best available.

JN.

The seat covers overall are a good quality. However, I don’t feel like the fit was spot on perfect for the whole package. The backseat covers fit snug and perfect. My only complaint is there is no exit hole for the middle seat belt to come through.

So if you have three people on the back seat the person in the middle doesn’t get the whole seatbelt (only the part across the chest). The front seat covers do not fit perfectly snug. They fit okay but not snug against the seat.

I installed them myself and it took about 2. 5 hrs. The directions are pretty much useless because they are geared for someone actually taking the seats out to install them and I do not know how to do that on my own.

They are thick and good quality but they tend to trap my body heat and can make me alittle warmer than desired. Overall they are a good seat cover and I do like them. But, had I known they would trap heat, not fit completely snug in the front, and not allow the seatbelt in the middle to be fully functional I do not think i would have purchased them.

I think I woild have gone with a different option.

For anyone purchasing these covers, you’re making a great investment. In terms of quality, they’re 5 out of 5. I’ve had a set on two other vehicles plus the current and have never had an issue with tearing, fading, etc.

over the past 5 years. They do some collect dog hair but still manageable to clean. The reason for the 4 stars for this particular model is the insulation. Be prepared to cuss just a little. The front two seat covers, go on without a problem.

The back seats proved to be a little more difficult. To install these correctly and save some time, start by removing the back seat. Once they’re out, it’s pretty easy to install. The cup holder may prove to be a little dicey.

Unfortunately my ocd wouldn’t allow me to have the seams showing, so the entire cup holder, backing plate, all came out. Now even with this pulled the seams were still showing with the cup holder down.

To fix this, I cut the seamed corners and tucked each side individually behind the cover plate. If you don’t go that route, be prepared for the cover to slide out anytime you pull down the cup holder.

At the end of the day, these are absolutely worth purchasing, just have to have a little patience with the back cover.

The fronts are really nice and easy to install. I used a plastic trim pry tool to help tuck the cover behind the plastic seat trim, and also aid with pushing the elastic hooks between the factory seat fabric.

The rear is a pain. Seat has to be removed to detach it from the rear wall. The area around the cup holder it difficult. I found the best option was to remove the two plastic trim rivets and remove the plastic liner from the armrest area.

Then unbolt the armrest with the four 10mm bolts. This allows the proper fitment of the cover on the armrest, and to be able to tuck the new cover cleanly behind the plastic liner when it is reinstalled.

You will need two new plastic trim rivets from a local parts store. Overall for the price it’s the best fitting covers. The seat warmers still heat through it just takes a bit longer to warm up. Delivery took three weeks because the expected date kept getting pushed back.

Seems to be a common complaint with RC.

The fit is much better than I expected. No written instructions were included beyond cleaning of the material. No installation videos were availablevspecifically for a Ram, but a Rough Country video on YouTube for a Silverado was close enough.

Installation is fairly intuitive if you take the time to look over the covers before installing. My Ram is a regular cab truck, so only front covers were ordered. The front to back cam lock straps work very well and connect/tighten easily.

I installed both covers in a leisurely manner and still finished in about an hour. The material is heavy duty and the covers appear well constructed. The factory upholstery on the driver side seat was beginning to show some slight wear from me sliding in and out.

The head rest covers fit better than a tight gloves and are a nice bonus. These covers will prevent further wear at a bargain price.

Nice fit. Nice look. High or Low heat is great. Install was pretty simple. Switches are on designed to fit on side of bottom cushion. except the seat cushion is in the way. I drilled small hole in blank area of dashboard and installed there.

Looks good and much easier to access.

As others have said it came with some chips in the painting but I hardly care because you can’t even see it, it’s underneath the vehicle. But still I can’t give five stars when it comes with chipped paint.

As far as noise, not sure why others are complaining. It’s louder than the stock exhaust but it’s not enough to wake the neighbors by far. It has a nice aggressive sound to it, little bit of rumble. I took it for a spin with the top down and it’s not too much to drown the radio for sure.

Now for installation. Don’t waste your money taking it to a shop. I have literally zero mechanical experience and got it on in a little more than an hour. The hardest part is getting the old one off, I had to get my neighbor to help me with the leverage to pop it off the grommets.

Once I did that, new one was on in about 20 minutes and ready to drive. I’m definitely happy with the product, it looks and sounds nice and was very easy to install. Like I said before though, can’t give five stars to a product that comes with chipped paint.

Installation is not as simple as the ad makes it appear and does require some experience working on car wiring. In particular, in my 2011 Jeep Wrangler, the red power wire tip was too big to go through the body filler foam hole.

I had to cut the wire, run it back through from the engine compartment to the driver’s side using lockwire, and then splice the wires together again using a connector. Not too difficult but requires some experience working on wiring.

Also, the M9 fuse cavity is open and available (since there are no heated seats) for use instead of replacing the IGN fuse. Much easier to do and thus automatically there is no power to the seats when the ignition is off.

I ordered these seat covers not seeing the note that these covers would I fit a 2022 refresh silverado built after 03/22, (mine was built 05/22). Once I received them I noticed the Note while looking for the instructions.

I compared the pictures from their instructions and pictures they had online and everything was the same as my truck so I decided to install them. I’m not gonna lie , it was not a super easy install, mainly because the backrest in the back seat is a huge pain to remove.

Instructions were not very good and I eventually gave up on them and just installed them how I though they would work best. I didn’t need to remove any seats minus the back, backrest. Everything fit great! These are the best looking covers I’ve ever used, they look close to factory.

I don’t like the way the center console top cover looks but am glad they provided something for it as most companies don’t and it is the one part that gets dingy fast. Quality is excellent, fit is excellent.

Overall great covers just need to work on instructions and update what vehicles are compatible.

Let me start by saying, the fit and quality of this product is 4. 5 stars. The only thing I would want to change is to have higher quality buckles. Time will tell how long the buckles hold up, but they felt cheap.

Now, the reason I gave only a 3 star rating is because of how difficult it is to install the back seat covers. Wow. My poor wife witnessed some of my more colorful vocabulary as I struggled to remove the bolts and release the three latches when uninstalling the back seat.

I highly recommend using a 10mm box end wrench to hook onto the latch. While the instructions say you can open these latches by hand, I was unable to do so (which ultimately made me question my manhood).

In the end I was able to get them installed and they look very very good. Just be prepared to spend a couple of hours working on it. Another change I would make is to re-design the center arm rest/cup holder for the rear seat.

I found the design in this area less than adequate. Overall I would recommend this product if you are up for the installation process. The front seats were a breeze to install. I like the material used.

I’m happy with my purchase.

This is the second set of RC seat covers I have owned, these are on a 2020 Silverado LT Trail Boss and the others were on a 2015 Silverado LT and I love them both. Excellent fit, great price and premium quality, the only issue that I have with these covers as well as the other set is the lack of installation instructions.

There was no installation instructions in either of the sets I purchased. I know you can look on You Tube and find a video on just about any installation that you could imagine and installing the covers is pretty straight forward but there are a few things that you need to be aware of.

The head rest removal on a 2019-2021 Silverado will be almost impossible unless you know the special procedure required to do so, the other thing that you need to be aware of is the proper location of the different pieces.

The seat covers are not interchangeable from passenger and drivers side so they could be installed on the wrong seats. I did not see a video for RC seat covers so I actually looked at one from a competitor to see how to remove the headrest and I could determine the location of the seat backs by the air bag openings in the covers but I had to do trial and error on the seat bottoms.

On the video I watched of a competitor, their covers had location tags sewn into each piece and this would be so simple and helpful do on these as well. As I said, I truly love these covers and I would recommend them 100% even if the install can be a little challenging.

These are nice seat covers for the price. The website said that these came with 7 molle pouches which they did not. That (and the fact that every company that carries Smittybilt is out of stock on their molle pouches) was my only complaint.

I’ve ordered a few off brands to put on. Outside of that, they are nice, well-fitting seat covers and with molle pouches will get some things out from under your Jeep’s backseat. I will say that the “10 minute install” is FAR from accurate.

Maybe if you practiced every day for a year and had long skinny arms like Manute Bol it could be done in under an hour, but no way this is a 10 minute job. Like many seat covers, the difficult part of the install is getting the elastic with hooks to meet under the seat.

If they would simply use straps with buckles like the front to back portion does, this would not only be much easier to install, but more solid also. I’m unsure what to rate “fit. ” They are nowhere in the league of PRP or Bartact seat covers I’ve used in the past, but are half the price.

There are air pockets between the cover and seat backs and the seat portion isn’t tight, but it’s probably not fair to compare them with seat covers costing north of $400. They work and provide some extra storage once you buy your own molle pouches.

The cover fits my new Bestop seats in my 2000 TJ. looks good, but it does not look tan, more of a lighter green than the olive green covers, but not Tan. I didn’t read the add right. it does say front seat covers.

It in fact is just one seat seat cover for 112. 00 with bags. Does not completely cover seat bottom. I bought them because it is canvas and wanted more protection from my husky’s nails. Would have rated it higher if it was Tan, and I got 2 seat covers like the ad says.

I thought I was getting entire seat covers but they are only covers for the top of the seat. They do not cover the seat bottom where your butt goes. Still, they work with the seat side are bags and that limited my options.

Just a little disappointing but still gave me the molle system I want for the back of the front seats. These come 2 to a box but only have pouches for one side.

Motor Trend Universal Car Seat Cushion (Bench) u2013 Padded Cover with Non-Slip Bottom & Utility Pockets u2013 Black Faux Leather Rear Chair Protector for Auto, Truck & SUV. This car seat cover is super cool.

It was easy to install and very fast. What I liked the most was the packaging in which I arrived. A plastic bag with closure to seal it and with a hook. After opening it came very well folded. The instructions were included, easy to understand.

It is perfect for my truck, really tailored. I really liked the extra gift that came from Motor trend, there were several air freshers, cherry, vanilla, new, pine and fresh. I really liked that extra gift since I didn’t expect it.

For some reason i was not able to upload the pictures.

I received this car seat cover as part of the Spark Reviewer Program. I was expecting a cushioned seat cover but was disappointed. This is just an average car seat cover. While it does cover the back seat in our minivan it is seriously lacking in cushion.

I chose this item because we have been looking for something to provide cushioning to our rear seat as the seat itself is rather firm. This product was not cushion as described. If you need a basic car seat cover this product will work.

If you are looking for something cushioned keep looking.

I purchased this for the car I just bought. I really like the front covers. Unfortunately, although it claims to fit my 2018 Mazda CX-5, the rear seats didn’t fit. I had to cut holes in the bottom rear seat cover for my seat belts.

I didn’t even install the rear seat back cover because I fold one side of the seat quite often.

Covers seem great, as expected but lack of instructions was an issue for me. On my 2022 Tacoma double cab the rear middle seat belt passes through a fabric loop in the seat. The only way I could see to install the cover was to either cut the loop, or unbolt the seat belt from the truck floor feed it up through that loop, then reattach.

I did the latter but felt uneasy about either option without guidance. I was also unsure of how the small black clips on the sides of the covers were supposed to be used. I guessed that they stretch across the bottom or back of seat and then clip together, but the straps were too short on the rear driver side seat.

Finally it wasn’t clear where the straps and clips should pass/attach under the front seats, esp. the passenger side which contains a bunch of cable harnesses and attachments. I took my best shot and crossed fingers that I didn’t goof up any electrical connections or sensors.

Overall, the fitment on these covers is pretty great. There are only two points that I think could be improved. I bought the front and back seat kits, becaause dogs. Front seats fit pretty well, and offer great coverage for every part of the seat and I was really happy with them.

I was not quite as pleased with the rear for two minor reasons: the headrest coverage for the rear does not have a velcro closure like the front does, and while the seat back accounts for the top of the middle belt but the bottom does not account for the loop that holds the belt to the seat.

To install it with the belt through the seat loop, you need to unbolt the bottom belt mount and bypass the seat retention loop. Since I don’t ever expect to use that belt, I simply left it behind the cover and it’s great! Certainly keeps the dog fur and such out of the original upholstery and looks great!.

I’ve been shopping for seat covers for my new Tacoma’s leather seats. I have a new American Bulldog puppy and didn’t want to have the leather ruined. Found these online and the price was like, WOW! Got them an right away put them on.

Install was super easy. Fit was perfect. Little hard to get to the inside front seat retainers but with the help of a mechanical fingers I was able to grab a hold of them and get them fastened. My driver’s seat is electric, cut out in the seat cover didn’t fit well but other than that, they tightened up and fit great! Back seat was even easier and the fit was just as good as the front.

After a couple weeks I’m still happy with these, dog Loves them, original leather seats love em. Still a good snug fit and if they do rip (which I don’t believe they will) price is right to just replace.

Thanks for a Great Product.

Here’s the deal, these are the best available covers I have seen. In regards to look and style, they are awesome. Of course they are a bit spendy and a challenge to get on. They match the 2-tone interior of my Jeep quite well and now that they are on, look like they belong there.

There were a few issues, but nothing that would make me advise against. Installation was a challenge, but nothing you couldn’t handle. I had a laugh as well that they were designed with velcro that was intended to slip through the tightest squeeze between the upper and lower part of seat.

The joke? The friggin’ bottom of the Jeep is the kind of fuzz that velcro sticks to, so nobody is slipping that through without a little help. Do what I did and use the plastic that these ship in (or a big Zip Lock) and slide that through first.

Then slide the seat cover through. The bottom went on a lot easier, but I heard a ripping noise when I pulled the nylon straps tight, not cool. Overall, by the time you get the first cover on, which took me about 20-25 mins, you’ll have learned everything you need to know to get the other one on in half that time.

The covers are cushiony, seem like they’d be easy to clean and/or stay clean, but they do smell a bit like wetsuit. I hope that’ll fade. It’s not a good kind of wetsuit smell, not that there really is one.

I can’t complain. All the in and out was starting to wear out my standard seat. These covers are excellent!.

I’ll start with very nice look and feel. I got the grey and black for front and back seat. Added some nice contrast. Install, overall easy to do with some tight spots. When you are putting flaps in between seat where it bends is really tight and Velcro catches.

Once complete it does leave some of the factory seat exposed on back corners of seat where you sit. It would be nice if it covered the whole seat pictures kinda deceiving. And they are stretched tight.

Other than that they are exactly what I wanted. Make sure you put driver side on driver side and same for passenger. There is a flap that opens up if air bags go off. That flap needs to face door. Easy do yourself mod.

Completed in about an hour front and back.

I wanted to protect the cloth seats in my wrangler and decided on the Rugged Ridge covers. They fit super snug, are comfortable to sit on, and look great. Only word of caution I give is that they are not easy to install.

Between the super tight fit and cramped interior in which to work it was quite the workout!.

I spend a decent amount of time with my toddlers in the car, these days, because there isn’t a lot to do besides car rides, order pickups, and other things you can see by driving through or past for entertainment.

I received these car seat protectors in exchange for my honest review, and here it is: YES, YOU WANT THESE. its such a minor detail to lay these down before installing your child’s car seat- but it makes such a BIG difference in mess! its amazing how many crumbs and gunky things accumulate around a car seat.

and just get smooshed into the seat underneath! not with these though! they’re a perfect protective layer under the car seats, and so all I have to do is shake them out and give them a scrub down- but my seat underneath is safe! I really appreciate the detail of the little pocket at the bottom, too- because it helps control all the extras you car around with kids- wipes, binkies, sunglasses, toys- whatver you need to have on hand, it keeps it corralled instead of floating around haphazardly in the car.

I also am using the kick mats on the back of the front seats, so it makes my backseat look like this fancy, tidy little cave the kids ride in. They’re a huge help!.

My Husband just got a new truck, so he’s trying to keep his leather seats as nice as possible for as long as possible. It was great timing when we received this product in exchange for my honest feedback! The SafeFit Complete Seat Protector does a great job at protecting his seats! the strap holds it up well, the grips on the bottom do a great job at keeping it in place! I personally love the additional extra pocket at the bottom, and it’s perfect for both rear facing or forward facing.

It is unfortunately a tiny bit on the short and narrow side, but aside from that I really wish it came with a piece to help protect the actual head rest as well. Our daughter’s carseat has adjustable tabs that sometimes dig into the headrests so to have an extra piece to protect that too would have been amazing.

I would still reccomend this seat protector.

These seat covers are awesome. They are well built. They fit like a glove. They are a little rough on installing them. So be patient when doing them. It took a little over a hour to do. The hardest part, is getting the velcro ends tucked in between the seat and back.

The seat and back is really tight. It is not really easy. And the velcro will stick to the seat. I found that I put duck tape on the velcro helped it from sticking to the seat. I got one end tucked though were I can grab it with pair of pliers to pull it though.

It is better to put the back on first. That way you are not fighting with the clips on the seat covers. The clips are hard to put though too. Just take your time. I’m 100% satisfied with these covers.

They look like they are factory seats. The quality and thickness is great. The thickness is maybe the only thing that might be a problem. Is after you get them on the back seat. When you let the seats down, The seats are pretty snug with each other when putting back up.

So you have to push a little harder to lock them. I can live with that for the quality these are. Well worth the money.

I absolutely LOVE these seat covers, but the installation was a pain. The front seats need to come out to install the covers properly. There is no way to get your hands under the seats to join the bottom hooks together.

The back seat covers were easier but there is no clearance between seats so they are also a little hard to put on and now it takes more effort to fold them down. But all in all I am very happy with the quality and look.

It takes a bit to install the front covers but the nice tight fit is worth the extra work and look great. I have a bit of arthritis in my hand and I was still able to install in about 90 minutes. The back seat cover only takes about 10 minutes to install though.

Covers appear to be well constructed and thick material. I expect these will last for a long time. I’m very pleased with my purchase.

I have had great luck with them. I have found the material durable. Dog hair cleans off very easy. It does reduce the heat from heated seats, but that was expected and the heated seat still works well enough I have to turn it down.

I have crap attached all over the molle. Only complaint is, I wish the removable portion of molle zipped on instead of snapped. My tool bag was too heavy, causing snaps to undo. I fixed it by moving molle panels around, but a zip would have been better.

1st: If you have a Wrangler with an integral headrest the top strap doesn’t work and gets in the way. 2nd: The top side strap is in the same location as the seat release for the TJ. I’m going to cut it off and sew it on above or below the seat release.

3rd: For 2 doors the Molle pouches intrudes on your entry space into the back seat (which has a difficult enough entry). 4th: The seat bottom from corner are not enclosed and the seat cover attachment clips have nothing to clip to.

It would be better if they just enclosed the front corners and had a bungee clip at the back.

It fits snug in my 2014 Jeep Wrangler JK unlimited. It has storage up front for my stuff and storage on the back for my sons stuff. He thinks it’s cool and that’s all that matters. It took less than an hour to install.

Slipped it over the seat then snugged the straps down. Do not over tighten the plastic buckles. The. Places the pouches where I needed them. Great product for a good price.

Great product, middle seat belt will need to be undone in order to fit through the rear seat cover. Other than that very satisfied. Only reason it is not a 5 star is because of the inevitable, theyre not leather and seeds or anything that would stick to your clothes from the woods also sticks to these seat covers.

Can be an annoyance if you get Caesars weed seed pods or anything like that on you on a regular basis. Even with that I am very satisfied and would recommend them to anyone else with a tacoma that wasn’t willing to take the route of redoing the upholstery entirely and putting in leather.

Great product. They are clean and easy to install. I had no issue like others noted with the seat cover on drivers side covering the electric seat controls. They show just fine. Only thing I’d negative thing is the time it takes to install and get everything just right.

Lots of stretching and pulling. But that’s what it takes in my opinion to put good seat covers on and have them fit right. Especially rugged ones. Took about 45 mins to install.

Highly recommend these!!! Loving these so far (just installed them today)! They look great and fit really tight. It probably took me about 2 hours to install the covers. I only have 2 ( technically 3) small complaints about them.

#1. I wish they came with install instructions. #2. (part of #1 really) I wish I didn’t have to guess where the little side straps went. #3. I wish they had the little pockets in the back seat cover where you can stach the seat belt buckle when not using it and that it had the slit where the rear passenger side buckle slides between the seat.

Small issues in my opinion but still wish they had them. Even with those tiny issues they are definitely the best seat covers I have seen for my Tacoma!!!.

The fit is not PERFECT, but it does what I want it to do. I am able to still install car seats over the cover which was my primary purpose for buying. There is enough looseness that allows passengers to use the rear seat recline which is handy as well.

The material is tough enough to allow easy vacuuming after a dog has spent some time back there.

Easy cover for the back seat. Just lays on to with the top securing with straps arouns the head rests. Easy on and off and water resistant.

Very durable. Easy to install which is nice if I have people riding in the back. Easy to remove and reinstall. It is nice that the seat and back are connected with heavy Velcro so you can slip a seatbelt receiver through.

I can buckle my dog with a short harness.