20 Best Nexus 6 Car Mount (2023 Updated)

this is a hard to find product, because everyone now uses the holders with the magnets. But if u have multiple drivers in multiple cars this is perfect. comes in and out of vent quickly and easily. Easy to see while driving.

A must have.

This air vent car mount is exactly what I needed for my car. It’s secure and holds my Galaxy S5 nicely. You can set your smartphone in the car mount and focus on driving because the mount holds your phone as it should.

Plug & hold your phone , tight to hold the phone with any angle , easy to remove the phone & can enjoy air from vent also

This was the third mobile phone mount I purchased. 1st one said it would stick to any surface which it didn’t. Second one anchored itself in the cigarette lighter. That put it at a weird angle to view, was very shaky when driving and when removing it, it pulled the cigarette lighter housing right out of the dash.

This one, although not as hidden as the other two is as strong and stable as an anchor. The arm is solid so doesn’t look cheap like some of the goose neck versions do. Love the button on the back that slowly releases the holders on each side of your phone and then the ratcheting device that lets you set your phone in the cradle and then hold it securely.

This is much better than most of the other holders that make you use two hands to pull the spring loaded arms apart. Like this holder so much, I wish I had more things to do on the phone when I’m in the car.

Although it’s on the more expensive side of the spectrum, in this case you get what you pay for.

The phone holder’s long and fairly strong arm makes it a product you can use in passenger cars as well as in trucks. Even in my hulking F250, the extension is long enough to attach it to the windshield and reach well past the dashboard to near the steering wheel.

Suction cup is plenty strong enough to hold it, but it definitely does need the supporting stand to keep the phone reasonably steady. The only thing I wish were different is the cradle depth. with a protective sleeve on the phone, the phone sits very far forward on the bottom pegs, and I would not trust it in very rough conditions.

But, to its credit, the holder has not yet released and dropped the phone under normal driving conditions. When empty, the holder rattles – the side arms need to be completely closed for the rattling to stop.

Very nice product , shapes well and holds the phone steady . Would recommend this product to everyone .

I use my phone for navigation when I’m driving, but I don’t like having phone mounts extrude out of my dash or the windscreen. I used to use a mount with those fancy “one button release” functionality.

But because how bulky the mount was, the phone was mounted very far away from the vents. And every time I go over a bump I feel like my vents are going to be ripped off. It’s just physics–the farther away you have a mass hanging off something, the more leverage it gets, and therefore more force (or more precisely, torque) it exerts on the thing that holds it in place.

That’s why I really like how close the Airframe holds the phone to my car’s air vent. It feels so much more secure now compared to before, and no matter how bumpy the road is I never worried about the vents again (now suspensions become a bigger concern lol).

But the point being–if you want a compact, minimalist phone mount that also will physically protect your vent (or at least does the least damage), look no further.

I sent an email on December 8th, 2020 to Kenu Warranty coverage department regarding my broken “Kenu Airframe Plus” Car Vent Mount, which I purchased from Amazon Canada on August 23, 2017. This product has a Lifetime Warranty.

I attached Photos and a short video clip showing the broken part along with purchase proof from Amazon Canada. But till now I haven’t received any replacement mount or any response from Kenu. I called at 1-855-855-5368 and left a message but no call back.

I liked this Product of Kenu very much and purchased five of these mounts for all my vehicles with confidence that these products have a Lifetime Warranty on them (I also bought an “Airframe Wireless vent Mount” from Amazon Canada on March 10, 2021).

But I have three broken out of these five mounts. It is quite disappointing to see Kenu is not standing by its warranty promises on its products.

The actual part that holds the phone in place works really well, but the part that clips on the AC vent is really poor. The directions indicate that it can be tightened but in actuality there is no way to tighten this part so the phone has a tendency to flop over and not stay up.

I should have looked at the picture of the product better befor purchasingwhich was really a great price. Not worth the cost of returning the product.

The product seems to be perfect for holding the cell phone. Appears to be well made. My only issue is that I have vertical vents and it wanted to slip – attached over the little piece that allows you to open and close vent.

Seems to be fine attaching there.

This is the sturdiest vent mount I have ever used. It fits the phones well and does its job. I purchased a second one after really liking the first. Would definitely recommend to those looking for a vent attached phone mount.

This phone mount works surprisingly well. I am using it in the air vent above the radio in front of my right hand when I’m at 10 and 2 on the wheel. I have not tried the flush mount as it requires adhering it to the dash with the included adhesive strip.

It holds my iPhone with a normal-sized case. It seems like it would fit most any phone, including the plus or max versions. The phone has never fallen out of the grips as they hold very strongly. The grip releases by squeezing the two levers on the side and they snap close when you press the phone into the mount.

The only issue I experienced is that the mount with phone does have some weight to it so it naturally drags my air vent downward. The vents in my car are easily moved up and down so the weight wants to essentially close the vent.

However, since the mount clips onto one of the slats on the vent, it prevents the vent from fully closing by sort of propping the slats open, so the air still flows through it, albeit pointed a little bit downward.

It did fall off the vent once or twice so I needed to tighten how strongly it grabs the vent slat. Since then, it hasn’t fallen off. As with any vent mount, it does mostly block the vent so if you’re the kind of person that likes the A/C or heat blasting directly in your face, this might not be the best choice for you, should consider mounting it on your left vent, or should consider mounting it to the dash.

But compared to my previous basic magnetic mount, this works great without any issues. The mount doesn’t block the phone charging port which is in the center bottom of my iPhone and it offers plenty of solid adjustments to get the tilt and direction of the phone exactly how you like it, in landscape or portrait mode.

All in all, this is a very good product.

I’ve been searching for a good phone mount for my Honda mini-van. Suction cup styled mounts would not be the best choice due to the massive windshield and the angle at which it is designed. I didn’t want to get an air vent mounted phone holder either because when it’s hot out, obstructed air flow is not an option.

However, upon seeing this model in a friend’s car, mounted in the CD player slot, which neither of us use much anymore, I knew I’d finally found the solution I was looking for! The holder for your phone is simple and well made – sideways arms adjust and have a tension between them to keep your phone extremely secure.

Bottom little arms keep it from slipping out. The charging port area is not obstructed so if you have to plug in to charge you’re in business. A nice additional feature, which I have yet to install, is a little magnetic stick on square that holds your plug for when you need it.

The plate that slides into your CD player slot is secure and works great. For me, the height of the mount makes the phone easy to see for when you’re using map apps. It’s not flimsy, it feels completely secure, and I’m so glad my friend recommended this.

If you’ve got an old CD player that you’re not using much anymore, this is a great repurposing of that space!.

Unfortunately, this iOttie mount was a complete waste of time and money. I purchased this in January. When I went to install it I realized that the instructions state that it should only be installed over certain temperatures.

I considered taking it back with plans to buy when it warms up but Best Buy’s new and terrible return policy (which I wasn’t aware had changed) mean that I was outside of the short 15 day window for returns.

Thus I kept the iOttie until it warmed up. fast forward to now, I pulled it out of the box for the first time to use on a road trip. Followed the instructions exactly and installed it on my dash. Put my phone on and was pleased by how it looked and functioned.

We began to drive and within 60 seconds the entire device fell off. Not just the phone (which would have been bad enough) but the entire stand. The suction cup couldn’t hold the device in place. Turned around and began the process of reinstalling the iOttie.

Once done I left the phone out of it and we began to drive. Even without the phone, the entire thing broke apart. I don’t know if mine was just faulty but I definitely wouldn’t recommend using it to protect your expensive phone.

Best Buy was zero help of course. I am going to contact the manufacturer and hopefully can get a resolution. I will update once I do.

this product is amazing, great price. I bought several ones at the target, double price but it didnt hold the phone very well. I dropped my phone multiple times using the holder that I bought from target.

I highly recommend this product.

Ive tried several phone mounts. This is the best. Options make it useable on several different cars.

found out the best way to use it, to connect to the vent, but depends on your vehicle design, the suction cup didn’t work for my interior. Just look around for the right one for you vehicle, the closer you can see your phone the better.

Belkin is a trusted brand and the product is durable. It serves its purpose well just not exactly what I really wanted. I opted for this product because I knew I could count on the quality due to its name.

The cons would have to be the spreading open of the arms to get it to hug your phone in place. This has fell out of my vent a few times while holding my iPhone 11 and a basic silicone case. I also think the price is a little high for this product.

Maybe if it auto opened and closed its arms I would’ve been a bit more pleased with it. It’s been hanging out on my vent more so as a decor.

Our car is now five years old but it still has plenty of life left in it. One weak spot is the very dated sat nav and the high cost of updating it. For sometime now we have been using our phones and Google maps to navigate journeys.

This was a good solution except it meant that we had to put the phone down somewhere where we could not see the screen while driving. The Belkin Car Vent Mount is an ideal solution. It clips onto the vent grills and then hold a phone securely so Maps can be set and followed easily.

(This product was provided to me in exchange for a fair and honest review. ) You’d usually just look at a vent mount like this is the cell phone accessories bin by the register at a gas station, and you can pick up something similar – rubber fins slide into your car’s HVAC vent and holds your phone in place.

However, Belkin’s Car Vent Mount has a better build quality for more much more money than these gas station specials do. It also opens wide enough to hold an iPhone 8 Plus in a relatively thick TPU case, but closes narrow enough to hold a small MP3 player (think iPod Nano 4th, 5th, or 7th generation) in place.

It does work well with cars that have vertically stationary vents (as in louvres in the vent move to direct air or the vent opening moves from left to right while louvres in the vent direct air up and down).

For vents that aren’t vertically stationary, like in many Chrysler/Dodge/Jeep vehicles from the late 1990s through the 2000s, this doesn’t work as the weight of your device being held in place by the vent will drag it down.

It would need an extension of some sort to hold the device in place. Also – and this isn’t a design fault of the Vent Mount, it’s an inherent issue with this style of cell phone holder – your car’s HVAC settlings can affect how your device runs.

In my case, my heat gets hot enough at full blast to cause my phone to slow down after an hour, and the AC in my wife’s car gets cold enough to cause her iPhone to shut down due to temperature if the duct for the vent used is left open.

If you don’t mind closing an HVAC vent in your car (unless you need to warm up or cool down your phone), this is a decent solution.

This mount is pretty darn good. My dashboard is not flat, so I thought I may have a problem with the way it sits on the dashboard. Not so. I cannot use the little pedestal because of the round dash but other than that it works great.

It secures very tight to the glass. The little feet and side clips hold my phone, with the thick Otter Box case, securely even over bumps. I bought another holder before this one. That one secured itself in the air vent.

Came loose everyday and couldn’t hold the weight of the phone. This one is worth it.

I had a “cup holder” phone cradle that worked okay. The problem was it required me to take my eyes WAY off the road to see my phone. I recently rode with a friend who had a magnet holder similar to this that was on his windshield (which I was afraid would obstruct my view) instead of the dashboard.

It did NOT obstruct the view and overcame a dashboard that was not flat. I have enjoyed mine and highly recommend it to others. (Too, it comes with extra metal plates in case you have several devices that need the same holder.

).

I just bought this new because i had one that last me over 2 years. I had the short type but this one is longer and has much better magnetic options. Having longer arm to hold phone will give you more proximity to your face and better way to maneuver or see your calls.

It also keeps mic cable and charger cable out of the way allowing you to drive well. It’s much better to keep your head up while you drive and don’t want to miss an important call. Be Safe!.

Must have some mechanical skills to put together, not difficult, but no real instructions included. Trial and error worked for me. Cheaply made but funtions well. Incidently makes a good phone stand for a table.

I did this a few days before placing in car. Uses a/c vent, tricky to get it in the vent,.

This is my favorite holder so far. It doesnt pull down my air vent and it holds my fat phone case lol. My past car mounts were suction cups and always fell down in the winter but this stays put always, even with my aggressive driving.

Definitely recommend it!!.

Close enough to Beam Electronics mount but fitment tolerances not as tight. Secures my Samsung Galaxy S8 Plus with Otterbox Defender case. Make sure all clamps and grips are clicked very tight since my phone did fall off in a fast turn.

Would recommend if you’re looking for a vent type mount in your vehicle.

Excellent phone holder. Suction works well, does not keep coming off every 5 minutes. The shaft between the suction cup and the phone holder is bendable but stiff so the phone does not shak about. I bought one for each.

Looks great already start using it have not tried the vent holder but it’s a good product and holds the phone firm and love the cusion support thumbs up

Defective windshield fixing part. Ventosa defectuosa.

REceived about 2 weeks ago. Placed on front windshield in ideal spot for viewing and has stayed put. Very pleased with this Kensington Windshield Mount so far!

I would have given this 5 stars if it didn’t break. It was very nice when it worked 100%. I only have used the windshield mount gooseneck with it and not the vent mount. By just looking at the vent mount base, it’s adjustable and looks like it would fit a wide variety of vents.

I highly suggest this mount. It is legal in non-window mount state or don’t have Bluetooth within your car. This mount also works very well with auxiliary plugs for radios. Overall I am very satisfied with this product and would highly recommend.

I have had many people comment on the mount and ask where to get it.

I have a 12 Max Pro with a heavy clear case so a magnetic holder doesn’t work well because I don’t want an extra magnet showing through my case. I was searching for a secure phone holder and this fits the bill.

It holds my phone without moving around and very securely. Yes it does block the air out of my vent but not horribly bad and since I have another vent it is okay. I love the two little feet at the bottom which helps keep my phone from slipping and the side arms with foam hold it tight and in place as well.

Loved it so much, bought one for my husband’s truck. Would definitely recommend it. Great buy!!.

It supports the weight of an iPhone 6s Plus. Easy to take off by pressing the button on the back of the cellphone holder. Clamps can be adjusted by pressing the back edge to grip the phone safely. A ball joint allows to switch between portrait and landscape view.

This car mount is connected to the air vent by moving a clip at the back of the car mount clockwise twice. I have had other car holders but my phone kept falling or flying on the curves -luckily the window was closed.

This is the first one I have had that holds the phone in place and it’s easy to handle.

I was skeptical when I ordered this because I used to have a similar one and it always fell off the vent. This one is awesome. It was super easy to install and is adjustable for any size phone. I installed it just to the right of my steering wheel so that I can easily unlock it with my FaceID.

One thing, I had to remove the pop socket from my phone in order to be able to use the holder but I am ok with that. This isn’t a must have, but it really is a nice thing so that you don’t have to keep fishing your phone out of your bag to unlock the screen.

I can just lean in front of it and the FaceID works. Love it!.

A very sturdy and well made product for the money! It installed perfectly in one of my cars, however in another car it blocks the entire navigation screen and pushes in the hazard button when installed upright.

It also would not install correctly upside down and I tried every way possible to make it work. No hassle return but had to pay for the return shipping. I highly recommend, but keep in mind that it may not work for your specific.

The Koomus CD Cell Phone holder is in the perfect spot in my Lexus ES350! Although, I do have to use it upside down. I bought another one for a friend for her Honda Accord and it fits perfectly. A great option when you are going to be in the car for a long trip and want to use Google Maps or Waze.

Good construction as it does not rattle or fall out. I recommend this product.

I saw this holder in California when visiting one of my friends. I right away ordered it and when i returned it was waiting for me. It took seconds to install and is absolutely the best Car Phone holder.

I then took some co-workers to lunch and they saw it and they ordered it for themselves and their spouses. I ordered one for my wife as well. BEST PRODUCT.

I find it’s always hard to buy something unless someone else has can recommend it. Well I bought this in Sep 2021 and mounted it the same day it arrived. Very solid unit and very well constructed. We haven’t had it long but I doubt it will give us any issues.

The suction to the windshield is super strong and it hold my phone very solidly, with no rocking. Comes with an alternative dash mounding (stick on) facility but have not tried this. Looks like it would work just as well but I prefer the glass mounting option.

Check your phone size though – just to be sure. It fits mine but if you have a wider phone, it might not extend to the width that you want. Instructions were super easy to understand and very clearly laid out.

Personally I’ve purchased a vent mounted unit in the past, but I’ve found this Belkin far superior to my previous purchase as it doesn’t rock around as much. (eg vent mounted ones can move with the vent!!).

– Pros – Main unit is sturdy and well-built as expected from Belkin. Halfords were £4 less than Argos. It’s easy to get your phone mounted in a way that is inline with the driver-side pillar to avoid crowding your visibility.

– Cons – I had 2 of these mounts and both were hard to remove the initial dashboard adapter adhesive film without irreversibly damaging it. I had to take the second one into the store for the team to do it for me with a Stanley blade to expose the sticky part.

Maybe I was unlucky to have that happen twice? Or maybe I was doing something wrong since I haven’t seen anyone else have this problem. When stuck to the dashboard in a 2015 Fiesta, the adhesive closest to the windscreen unsticks because the phone makes the mount front-heavy.

Perhaps something to do with the textured dashboard. When stuck to the dashboard, the way the mount sticks to the dashboard (imagine a sticky 4-leaf clover shape) means the whole unit is always wobbling very slightly which is distracting.

I think I’ll get used to it however.

My first one of these lasted me a good few years. However, every replacement I’ve had since breaks within 2 months, and always in the same place (base near the suction). I tried to give it the benefit of doubt, but I’m on to my fourth one.

Very frustrating to always be returning to the store. It’s a very sleek and stylish design, but not much point if the quality breaks frequently. Sometimes my phone pops out too which is distressing and distracting.

I always have to make sure my window isn’t all the way down so my phone does fly out.

TranslateShow in original languageDeze telefoonhouder voor in de auto werkt perfect. Had al heel wat verschillende geprobeerd maar allemaal zonder succes. Deze kan bij iedere auto op het ventilatierooster gezet worden en blijft prima zitten.

Houdt je mobiel ook goed vast. Valt er echt niet uit als je weer eens over één van de vele verkeersdrempels rijdt.

TranslateShow in original languageDer Halter wird in die Lamellen der Lüftung gesteckt. Sobald das Handy in die Halterung gelegt wird, passt sich die Halterung der Größe des Gerätes an und hält super.

Find ich klasse, so kann man verschiedene Handys verwenden ohne was zu verstellen. Geht einfach automatisch!.

TranslateShow in original languageNicht empfehlenswert. Hat mir bei 2 Handy’s am Rand bei den Halterungen den Bildschirm so zerstört, dass das Handy unbrauchbar wurde. 2 mal das gleiche Handy, 2 mal an der gleichen Stelle.

Handyhalter von 35. -, Bildschirmkosten von 800. -.

So I’ve used a CD slot magnetic mount for years; loved it. But bought a fancier case I didn’t want to mar with the metal plate; so bought this fancy extendo- one for my dash and a simpler select dash suction mount for our other car.

That one, though buikier installed and stayed easily and with the button that releases the hold on the phone, is truly a one button product. THIS EXTENDO was harder to install. even with the extra grip disk; and after following directions and mounting properly 2 problems emerged: 1) while described in ads as one-hand use, simply inserting the phone in case to move the movable side a bit, did not work–I had to use two hands for the phone to be held right.

and then 2) next morning, for some unknown reason, the disc AND the extendo holder had both fallen off my dash separately overnight. Disk went down to the passenger side and the extendo to the driver’s side floor.

As a big fan of Scosche till now this one was pricey and hard to install, hard to put the phone into and hard to stay put. Disappointing.

Okay, so I have two vehicles – one has Apple Carplay, one does not. I got this for the car that does not have Apple Carplay that way I can have better access to my phones navigation when I’m driving.

I don’t know if it was becase of how my dahsboard was or what, but it took about four or five tries to get this to stick to my dashboard properly. For reference, I have a Honda Odyssey. Anyways, after thoroughly cleaning my dashboard and then again cleaning down the mount for this, I got a decent suction and haven’t had any issues since.

Also, I Have a larger screen phone and a heavy duty case. This mount holds my phone with ease! Something I couldn’t say about the last mount I had.

I received the Scosche Universal 3 in 1 Mount kit to try. I was very happy to try this as I needed a new phone holder for my car. There is a lot in the box as you have 3 different options for your phone.

Meaning this has one phone holder with 3 different ways you can use it. Unfortunately most of what is in here is for the CD player option. It has something to go into the slot for the CD and has an arm for the phone holder.

It looks very nice and has an arm for this one that I would have liked to use on the AC holder but it doesn’t seem to come apart. I do not have a CD player so could not try it this way. I did use the option to go in my AC vent which I found very hard to put together.

So much so that I had to ask my husband. Since there is only one phone holder and the 3 options you have to push the ball thing into each of the holders that you want to use. Once it was in there it did hold my phone fine in the car in my AC vent.

The AC vent on my car is smaller than my old car so was happy that this is smaller so it did fit well. The actual phone holder is adjustable so will fit any size phone you have and is working great for me.

The other option is to stick the holder to the dash with a round 3m foam dot. As I live in Florida and the heat gets really bad did not want to use it this way.

So I’ve had this mount for a fair while, I use it and do doordash and I’ve had it mounted to my windshield, it sticks extremely well, like to the point of where if you want to move it good luck getting it off to do so.

But my note 9 with an OtterBox case barely fit in it when it was stretched to its widest point, and sometimes slipped out because of that because the rubber grips on each side would sometimes be partially pulled off and then flick the phone back outwards when they tried to return to their original position.

I dealt with it as it was mostly a good holder, definitely much better than the one I had before in terms of strength, but just a few minutes ago it decided to give up on life and the extending arm exploded, sending plastic and who knows what else all over the vents of my car so I’m going to have trouble cleaning those out.

Before that it was four stars as again it had some trouble keeping my phone in at some time, but due to the exploding nature of it I had to bring it down to three stars, as decent phone mounts, which I thought this was, should not do that.

Review of car phone holder I used the vent mount for my phone. I did struggle to connect the vent mount to the universal holder. It was a very tight fit, and I was afraid to break it. So I imagine it will be difficult to exchange it and put it in one of the other holders like the dash mount or CD slot mount if I wanted to.

The actual part that grips onto the vent is very tight on the vent which is okay. It seems like a secure hold for my phone. The universal holder part expands out to fit different sizes of phones. This part also holds my phone well.

This does not rotate easily from horizontal to vertical. In other words I would not try to do it while you were driving, but position it before you start your trip. This seems like a good quality plastic.

Overall four out of five stars. I received this item as part of a free promotion.

My Samsung Galaxy S21 Ultra is a whole lotta phone. I absolutely love it, but it’s big and heavy. Magnetic phone mounts cannot handle the weight, especially if you hit a big bump in the road. Neither can clip on phone holders that attach to air vents.

I don’t like looking too low for the phone holders that fit into the cup holders. Not to mention, you’ll lose a cup holder. The Mustang dash is too curved for a phone mount and I dislike sticking anything in my windshield.

Also, window mounts block my vision. I think the ProClip is the best option for super picky people like Goldilocks and me! I like that it fits snuggly, it’s sturdy and doesn’t block my vents. Only complaint is that the maneuverability is a bit limited, but it’s not a deal breaker.

Also, beware of extreme heat. During my first week in Austin, TX, my car was sitting in the driveway. My ProClip got so hot, my phone fell, and the ProClip stretch out too wide to clip back onto my dash.

I was not able to get it to go back into it’s original shape and had to repurchase a new one. The old one was about 4 years old. I use a sunshade now and it seems to work. I haven’t noticed any stretching with the new one.

But the weather has been a lot cooler and I’ve been parking in the garage. Overall, this is not a cheap option, but I believe this is the best phone mount for my Mustang. Very pleased with it.

I’ve had this car since Dec ’15, I’ve gone through several mounts in this time, mostly due to those dang round center vents. They aren’t strong enough to hold my phones (Samsung Galaxy line). And as much as I love the dash in my car, it’s got a surface texture that most suction cups REFUSE to stick to (long term).

I had gotten around that by mounting to the wind shield. Yeah, the view out the front is limited, most phones I use are HUGE, so they block a good bit. Add a dash cam & a easy-pass, too much loss of space.

I tried to attach it to the glove box, but it also has a texture so even the best suction cup fails. After buying the newer Magic Mount Pro, and it falling off the 3rd time. It broke. Nope! Had enough.

Thankfully, this company finally made a mount that works. I do wish it was not on the center of the dash, it did block one vent (ac & heat) but I’m not gonna complain because it works. Super easy to install, it clips right into place on the dash.

I did read other reviews, so I picked up the tilt mount and used that so the phone doesn’t sit too flat (hard to see & reflections!). They do sell an adapter plate, so I am able to use my Magic Mount Pro (after scosche thankfully replaced the broken one) so I’m a happy camper now.

It’s a strong and positive bracket. I would have liked a chamfer around each hole to help starting each screw. Also if multiple hole patterns were provided the phone could’ve be placed in different positions vertically.

These are small squawks as the bracket works well.

At this point I have used this mount for over two months and have not been disappointed. It provides both suction mounting as well as air vent mounting. During long drives, I have experienced overheating of my phones when mounted on the windshield and this holder allows me to switch it to the air vent, which helps to keep it cool on hot drives.

If there was any one issue with it, I would say that the rigid arm could use a bit of flexibility, although, I have not had any issues with positioning it so I can use the GPS feature on my phones. I especially like that it looks sleek when not in use, as the clamps and bottom “shelf” fold up nicely.

If you do use both mounting features, be sure to keep the vent attachment handy. I will be giving this item as gifts.

Purchased as a gift for my wife. I’ve had one for several years I use in my truck and our motorhome. Only problem is the flex coating on the stem has deteriorated. cracked and splitting. But, then, the south Texas sun through a windshield is quite brutal.

Still works great.

Good value and easy to use, however, unable to use the cradle with a protective case on my phone; the retention arms are quite shallow. Would highly recommend if you don’t use a protective case.

TranslateShow in original languageBellissimo design. Abbassando il telefono nella custodia, viene automaticamente bloccato in posizione. Spingendo successivamente il fondo verso l’alto, i lati fanno di nuovo spazio, in modo che il telefono possa essere sollevato senza sforzo.

Per mezzo di una palla, può essere ruotata sotto diversi angoli. Forse un piccolo svantaggio: il morsetto non si adatta a tutte le prese d’aria di alcune marche di automobili.

TranslateShow in original languageUn design magnifique. En abaissant le téléphone dans l’étui, il est automatiquement maintenu en place. En poussant ensuite le fond vers le haut, les côtés font à nouveau de la place, de sorte que le téléphone peut être retiré sans effort.

Au moyen d’une boule, il peut être tourné sous un certain nombre d’angles. Petit inconvénient éventuel : la pince ne s’adapte pas à toutes les bouches d’aération de certaines marques de voitures.

TranslateShow in original languageMooi van design. Door de telefoon er in te laten zakken, komt hij automatisch mooi klem te zitten. Door vervolgens de onderzijde omhoog te drukken maken de zijkanten weer ruimte, waardoor de telefoon er moeiteloos uit te tillen is.

Hij is door middel van een kogelballetje onder een aantal hoeken te draaien. Mogelijk 1 klein nadeel: de klem past niet in alle luchtroosters van bepaalde merken auto’s.