20 Best Led Headlight Conversion Kits (2023 Updated)

Installed in 99 Mercedes ML 320 with stock H7 halogen lights. These are brighter, whiter, and illuminate the road much better with a broader pattern as well as good distance. The instructions were very clear.

I did need to remove (and leave removed) the dust/water covers that sealed the headlight enclosures. These dust covers were not very dirty even with 20 years of use so I’m not concerned about this. I don’t hear any fan noise when I’m in the car and driving.

If I listen closely when the car is parked I can faintly head the fans so don’t be concerned about this.

once you can get the headlight housing moved to gain clearance ( you have to watch YouTube videos on changing bulbs on Kia sedona) it’s pretty easy install. But beware the tabs on the adaptors are extremely fragile.

Broke one instantly tying to put them in. Luckily with the other 3 tabs it holds tight enough. Very crisp white light with a perfect cutoff line like the original bulbs. I did get flashed once but I don’t think they are really annoying like some other cars with leds.

I would recommend. Just watch Youtube on how to get them in.

This is the best bulb for anyone wanting a true oem look for their VW. Not only does the bulb light the road correctly, but it does it without compromise. Lighting the road with no open gaps. These bulbs color match the DRL that are on all VW’s.

Best bulbs, with the best warranty. Don’t settle for less. These buy far are the best hands down.

I have long sought a good source for LED lights for my vehicles but former attempts ended up with poor quality and malfunctioning LED lights. I saw LASFIT featured on a YouTube video where the product worked and a guarantee was mentioned.

I checked out the web site and I was impressed with the selection range and product guarantee. The site was laid out well with a good vehicle ID set up. This does not mean the product is good but it can’t hurt to have a well laid out web site – as so many are not.

I purchased LED headlights for my Malibu and so far they are working great. They were much brighter than I had expected. I did not anticipate they could match the intensity of the HID system.

An early Christmas present, these LED low/high bulbs are an incredible upgrade to my wifes ’16 Accord. She went from barely being able to drive to and from work with her ‘bic lighter’ halogens to what I would call ‘stadium’ lighting.

These LEDs have the correct cutoff which is important to keep from blinding oncoming traffic. They throw light out far and wide to the sides. We both feel much more at ease driving in the dark and in inclement weather with these bulbs.

Economically priced and install in about 30 minutes. Could not be happier! Thanks!.

I installed the whole kit on my 2019 F150 and they look great. I originally did not receive a set of the low beams, as I received 2 sets of the high beams instead. I notified CS of the issue and they had my replacement bulbs sent out within 24 hrs and provided a return label for the return.

The CS team communicated well and was very helpful, which made for a These bulbs are a massive improvement over the stock halogen bulbs and really help see the road. The bulbs are very bright but not bright enough that it blinds other drivers, as long as you adjust your headlights once installed.

FYI, the factory dust cover doesn’t fit very well once the new bulbs are installed so may want to find an oversized cover.

Installation required complete removal of the headlamp assemblies which required the removal of the front grille, the upper bumper trim, partial removal of wheelwell covers, and finally the headlamp assemblies themselves.

The retaining tabs on the Heise bulbs were not exact duplicates of the factory halogen bulbs. There are three tabs on the factory bulbs with one of them being noticeably larger than the other two. The tabs on the Heise bulbs were nearly all the same size and the sealing gasket was about twice as thick as the sealing gasket on the factory halogen bulbs.

The thick gasket made installation of the headlamp virtually impossible without completely removing the headlamps so that you could apply the amount of force necessary for installation. The lack of a clearly larger alignment tab, coupled with the fact that one of the H-11 low beam headlamps required chamfering of both the bulb retaining ring and the headlamp socket before it could be successfully installed in the headlamp receptacle—even with the headlamp completely removed.

I purchased Heise LED bulbs to replace the high beams, low beams, and fog lamps. Before I completely removed the headlamp assemblies, I was unable to install any of these bulbs. After completely removing both headlamps—and using a Dremel tool on one of the low-beam bulbs and its matching headlamp assembly—I was eventually able to successfully install all of the bulbs.

Headlight removal exposed the foglamps which allowed me to obtain the leverage required for installation. The reason I bought the Heise bulbs was because a local installer used them exclusively. I asked the installer how much he would charge to install the bulbs for me and he stated that he too would have to modify the headlamp assemblies and quoted me a installation rate of nearly $200.

00 for the two hours of labor required for the install. One other note of interest is that the bulbs are supposed to be “adjustable” and have a small allen nut which is used to hold the adjustment. There is a small allen wrench included with the kit but it does not fit the allen nut.

All lights worked after installation and I am praying that they will continue to work for as long as I own this vehicle.

I notice they come with gold and blue wraps for both colors. Total of 4 gold and 4 blue. Do you put two on each one of your viler choice or one layer? Also 2017 Dodge Ram I have. And you guys that have that you will buy the anti flicker element harness.

Let me know please. Thanks.

Pros. Nice white light, very clean, bright Cons. Only lasted for years 3 months before left burned out. “How much do you drive?” 2016 Ram with 35,000 miles with 10% at night, so NOT a light.

I bought these lights because the 2006 Honda Civic Si had a burn-out low beam headlight, and I was looking for something brighter than ordinary halogen lights. These are only a few dollars more expensive than halogen bulbs and should last longer.

The brightness is great! Much brighter than halogen lamps, but not so bright that they blind other drivers. The installation process is very simple, I had to watch YouTube videos to learn how to install on the passenger side, it takes some effort, but they are plug and play.

As others have said, I have no problems with radio interference. In general, these are good lamps at a good price, and I hope they will last a long time!.

They do work in my projector-style headlights. I installed these into the projector low beam lenses of a 2010 Subaru Impreza. I previously installed a different brand of LED headlights which were significantly brighter but spread light in an uncontrolled pattern on the road ahead.

This set is not the brightest LED set available but for a projector housing, they very closely mimic the correct lRead more about review stating They do work in my projector style headlightsight pattern from a halogen bulb, but brighter and with better color.

I was able to correctly adjust the light pattern with these installed and was even able to put the rear dust covers on the back of the housing because of their short radiator design. I am quite happy with the way these turned out for my car and do recommend them for other projector style headlights.

These headlights not only illuminate the objects in front of you, but also illuminate the left and right lanes, which is very good. I don’t know if it has something to do with the color or brightness of the light, but now, when I drive with my contacts, it is now easier for me to see it at night.

You really have to see it to believe it. I drove to Uber with these headlights, and this is where I saw the headlights really amazing. For me, they are easy to install in the van by myself, and now I am more confident when driving at night.

I highly recommend this product and the customer service is very attentive.

I was amazed at the quality of these headlights. I’ve been looking for some time, and the ones I saw looked cheap, and very questionable for endurance and ease of installation. These are tough headlights, will last decades.

and the conversion could not be simpler and straight forward. And yes, as I hoped, they’re definitely brighter. I recommend this product to anyone tired of the weak old sealed beam lights.

Light output is great for low beams, not quite as good as I had hoped for high beam, but still good. Then included instructions were awful though. The instructions for the 9007 bulb (the ones I purchased) detailed turning the adapter collar counter clockwise to remove it from the lights.

The adapter on my lights was held on with a set screw. It then said to install the adapter into the light housing, followed by the retaining ring, and put the bulb in last. This was also completely wrong.

The retaining ring had to be put on the bulb, then the adapter had to be slid back in place, and secured with the set screw before installing everything together into the light housing. Because I tried to follow the instructions first, I ended up losing the adapter into the lower part of the housing, and then had to mess around for near 2 hours trying to fish it back out.

Would have been so much less stressful if instructions matched the actual bulbs!.

I bought these LED headlights as an upgrade to my halogens on my Generation III (1996-1999) Ford Taurus SHO whose original lights had always left a lot to be desired. Following the instructions on how to install these LED lights is key to ensuring a good fit, though I did have to rotate the bulbs 180 degrees from their original recommended installation so that the wide side is now down and the narrow side is now up to get the low and high beam to work properly.

Pros: Good light output once I realigned the headlight angles. You have to do this with LED bulbs so that you don’t inadvertently blind oncoming drivers. Nice cool white beam. Installation, again, is easy and straightforward, even if I had to rotate my bulbs 180 degrees.

Cons: Really not that much different in light output between low beam and high beam. All I noticed is that when I activate my high beam, it seems like it turns off the low beam and activates the high beam LED chips, so what happens is I have a beam of light that shines marginally higher but not brighter.

The brightness of the LED light beam is better than the original halogens but I wouldn’t say that they were significantly better. Also, my car lost its ability to flash my high beams with these bulbs installed.

Not exactly sure why, even though theregular high beams does work. Overall, it’s a nice upgrade, easy to install, good cool white light output. Time will tell how durable the product is.

High quality LED headlights at a decent price. I bought these after a friend purchased the Lasfit brand for his truck and told me how great they were. Let me tell you he was right, these things are super bright but still give a focused light beam when installed properly.

As others have stated the vehicles lock ring will not fit around the heat sink but it’s not supposed to with these. Once you figure that out install is super easy and there is a video on Lasfit’s website if you still need help.

I did need to aim my headlights down slightly but I have a lifted truck so that is to be expected. All in all great product that will hopefully stand the test of time.

Application is a 2003 Jeep Liberty Limited. I had previously done my fog lights with Lasfit LC6 lamps, and were so impressed by how much brighter and whiter they were, that I just had to do the headlights as well.

I chose the LA Plus as a good balance between price and performance. If you want the ultimate value, go with the LC6, but you will sacrifice headlight beam. (But they’re ideal for fog lights that are wide dispersion anyway.

) For the ultimate in brightness, go with the LS Plus, but it comes at a cost. For my Jeep Liberty that takes 9007 dual filament bulbs, the LA Plus LED lights have two rows of LEDs that mimic the placement of the halogen filaments, maintaining a decent beam pattern.

Brightness is about on par with the stock halogens, but have that white 6000K light that make road signs pop. Overall, for the cost of a pair of Silverstone halogens, I’d much rather have the LA Plus LEDs.

First photo is low beams, stock halogen on the left, LA Plus LED on the right. Second photo is high beam. Third photo is my 2003 Jeep Liberty with LA Plus headlights and LC6 fog lights.

I bought a whole round of new LED lights for my truck. Mainly because Ford missed the mark with their standard bulbs everywhere. They were dim and really hard to see. So I happened across ALLA on a few different website and thought I’d give them a try.

Man was I super happy with what I got!! I actually called them and had every question I asked, answered in a professional manner and they even suggested a few different things for me. Would I ever buy lights from ALLA again? ABSOLUTELY!!.

The lights look very good. The red led over the white regular bulb was such a rich red and so much brighter. Also the turn signals blink much more crisp. Instead of a fade. The reverse bulb wasnt the right bulb, but after looking at thier bulb chart i found the right on.

The reverse light is very nice.

I’ve used different types of LED lights for my car and truck but nothing compared to this. The way it’s built, the brightness on these are incredible, and the quality is amazing. I only get my car lights from here.

Was ver hard to get the connector inside of the housing. Because the bulb is high and low beam when the low beam is a adjusted the high beam shines into the sky. when the high beam is adjusted the low beam shines on the road 4 feet in front of the car.

No what I expected for the price.

I received the set of LED bulbs yesterday. I installed them right away; the beauty of LED lights is that you do not have to run wires and install ballasts like HIDs. The LEDs plugged right into OEM the wire harness just like regular halogen bulbs.

The package included two sets of shields instead of 3 as advertised (yellow, blue, and clear). I contacted Kensun, and they quickly responded to my message. They explained that they no longer have the clear shield, but the bulb can be used without a shield, and it would emit the bright white light the same as with the clear shiel.

Great lights. Very easy to instal fit was excellent. These lights are well made. The light output is awesome much better than the halogens they replaced. The replacement warranty makes it even better.

My headlights and fog lights had become terribly dim. I replaced my headlight bulbs with Lasfit bulbs and was amazed at the ease of installation and brightness of the lights. My wife bought me new fog light bulbs for my birthday and again super easy installation and the fog lights are at least 10 times brighter and far more effective.

I got these for my girlfriends Chevy Cruze 2012 and they are a lot brighter than her halogen bulbs, except for the fact that the “high beams” barely make a difference :/ and by that I mean you can hardly tell the difference when the high beams are on compared to the low beams.

Overall they are still pretty bright and will most likely shop here again.

I’m not sure if I adjusted the beam while putting these lights in but my stock worn out halogen bulbs look pretty close to this I have them in the right position thick side up narrow side down so I’m not sure.

What a cool product! I wanted to add halos to my JK but wanted a simple install + I like the classic look of the factory headlights and wanted to keep them. I’m sure these would fit fine on many aftermarket headlights as long as you have the factory retaining ring or something just like it.

The setup wasn’t tough at all. The directions are short and very clear. Took me about 60-90 minutes to instal but I bet most people will do it faster. The halos are very sturdy. They stick great to the retainer ring.

Just don’t forget to use the primer pad (that’s in the instructions). I chose the BC1 option. That allows me to use my phone to control the lights thru the Oracle App. That’s one of my favorite parts.

I will say the Oracle app doesn’t allow me to use the color wheel or the brightness gauge. This is why it doesn’t get 5 stars. But alas, you can download the HappyLighting app which works with the lights until the Oracle app is fixed.

The lights themselves are a head-Turner. You can create any color you like. The whole color spectrum plus + brightness. There are many patterns, fades, strobes and it even has an option to sync to sound.

I included some photos after I competed the instal today. I’ll add more later. I really recommend these halos.

I thought I would spend a few extra bucks for a good quality set of halo rings over some of the cheaper ones I had seen advertised. They arrived promptly and in good condition. The rings themselves have an adhesive and are advertised to simply stick to the headlights.

Keep in mind that the rings are flat. However, the headlights are curved. As a result the flat surface of the rings really don’t make much contact with the headlights and consequently don’t stick very well.

I ultimately ended up using some glue to fix them in place. Never the less they looked good and I was happy with their appearance. Fast forward less than six months. I noticed one of the rings was not very bright and at times would not work at all.

when I looked into it further I found that the anti flicker module had cracked/split open (it is encased in what appears to be a red colored heat sink). I’m assuming water must have gotten in and damaged the unit.

I really don’t want to hassle with trying to return it (the glue kind of ruled that out) so I ran the wires from this ring and spliced it into the module from the other ring and both rings worked again.

However, shortly there after some of the lights on the ring that had the original issue went out. As of a couple days ago they both went out. Unfortunately I didn’t send in the warranty card. I’m assuming that if I had done so it would be covered under the warranty (albeit I would still have to deal with the glue).

However, I didn’t expect to have them fail this quickly. I guess next time I will buy the cheapest ones I can fine and hope for the best.

The initial phase of the install is remarkably easy -peel and stick. Phase Two requires a bit more patience as the factory headlight access ports (where you will ostensibly tee into the factory wiring) are quite tight and a little patience here will go a long way.

The video (on-line) explaining the install make it virtually foolproof -the only advice I can add is to double check that you are tying into either lo or hi beams on BOTH sides; the wiring diagram is also available on line.

As for the halos themselves; they provide an intense blue/ white glare that will help illuminate your peripheral vison but do not add any depth or reach to whatever bulbs you have installed. If you are thinking that this product will boost the performance of your headlights -don’t purchase them.

I installed them merely as a vanity -and they excel in “Look at me!” department. Overall, a good value at this price-point.

bright and seem to be built well

I test one headlight and it bright I like also good price

Good value

The original YJ halogen lites as those with YJs knows are useless. These take that all away! With the LED bighter lite though,I do need to adjist them down so they hit o the roadeven lower as I keep getting hifh beamed by on coming cars with the lows on.

I do not see too much of a difference between low and hi beam on these, they are very bright!!.

I was apprehensive about intalling these lights on my own but, after reading about how LED were the headlights of the future and how much brighter they were at night. I decided to dive in and install.

I watched the video a number of times and it was easier than I thought. The reason I didn’t give these lights all around 5 stars is that there are no instructions on how to adjust the light beams for the car.

I’m still fumbling around with height of light and width of beam. It would be nice to have those instructions also included. I’m in fear of blinding someone until I have the lights adjusted properly.

I am new to Jeepin’ and I am not really a qualified wrencher. So, I am trying to make sure when I buy something it is plug and play. These were and I had no problems installing and having them work. The improved brightness is remarkable.

Ease of install is going to depend on the vehicle that it’s going into. I put these into my ’05 Titan which had horrific lighting, even with higher end halogen bulbs. I installed these, for my truck, it was easier to turn the wheel all the way to each side to make access behind the fender well easier.

The kit includes the 9005 and 9006 bulbs, low and high beams. The cooling fan comes off of the led housing a bit too readily. The mount isn’t as secure as the halogen bulbs, I can wiggle the bulbs once mounted in the housing.

I normally only haul during the day with this truck, but I did take it snowboarding the other night. The lighting improvement was drastic. Downroad distance was enhanced. Naturally the lighting is much whiter, this isn’t my first set of halogen bulbs, I have a higher end set in my daily driver.

I don’t notice much difference honestly between the two. I’ve driven with those for two years and never been flashed, hopefully these live up to the same.

I installed these in my 1996 Toyota Land Cruiser, it could not have even easier! They are a direct replacement for the standard 9005 & 9006 halogen bulbs. In total it took less than 10 minutes to swap them in.

The cooling fans start up as soon as the lights switch on. Very impressed with the light patterns of both high and low beams. It’s great driving on country roads and seeing a lot farther with a cleaner light.

These replaced some Sylvania Sliver Star Ultra bulbs. On my car the low beams are the daytime running lights, I only get about a year out of a set of the SS Ultras. I tried an earlier model of this bulb on my 06 Corolla and they have been running for 2+ years.

I searched for the same ones but they had been replaced by this model. These seem just as bright as the previous version with them being physically a little smaller allowing for and easier installation.

I would buy them again and have actually bought more of another version from ALLA Lighting for my truck with great results as well. When needed I will definitely buy from them again.

As far as extra lights that you can just plug and play out of the box this is a great option. It seems to me that you are overpaying for the product itself, you are probably paying for app development.

The app does tend to go down sometimes but it doesn’t take it long to reopen. I’m a fan!.

Only could connect one time. Now I can’t connect to the darn thing and if it does, I can’t control the lights. Super waste of money. If someone resolves this to a working 100% of the time I’ll edit my review.

This product was great. Love the different colors!! East to set up and install. Hit of the parties.

H7 Bulb The low beam projector lights are a dream due to the shape of the lights in the headlight moisture boxes, had enough room for proper ventilation from the light fan. Light output is very intense “Ghost In The Machine” viewed from a distance no dark spots.

The projectors keeps light down from blinding on coming drivers. Lights are white and not halogen brown color. Very good low beam width coverage. One issue, but this is on all H7 bulb socket modifications, had to buy an adaptor which took several days to figure out the shape was needed.

Then figure out which mounting prong on the adaptor socket to cut for proper fit and alignment of the led bulb in the projector assembly. Also cut a grommet cross wise in half and slide on to the led housing as a seal between the led housing and the H7 adaptor.

to prevent dust entering in the projector assembly, This took a few hours on the first bulb and about 15 minutes on the second bulb due to learning experience. No glue or sealants were used in this modification.

Close to a factory install. I am glad the led lights had wires and connectors to plug into the original car light sockets. Put all this in the moisture box with no issues and plenty of room. If I have to go back to Halogen, very easy, nothing cut or modified with the original light sockets, Hope they last a lot longer than halogens.

My car battery appreciates its as well. Not crazy about H7 bulbs, Wish car manufactures’ used more friendly lights such as 9005 in projector assemblies. LED lights rate a 5 Installation rate a 3 Overall rating of 4 Very pleased with the product and fair pricing.

Saved hundreds on upgrading to LED lights from the car manufacturer. Please keep up with new innovative light technology. Thanks, Auxito.

Save us some money. Packaging is top-notch! I have a 2014 Hyundai Santa Fe. Purchased a box of M3. Order #53841.Do I need another set of lights? Either high or low beams? Thank you.

Replaced the useless halogen globes in my 2012 bt50 with these led. Am very dissapointed with the light output and to be honest think the halogens are actually better. Hardly light up the road and the 6200k washes out against the black road.

Think i will just go back to the 130 plus halogens.

Fitted to an old VW Kombi. Made a fantastic difference

Product was recommended to me by my mechanic. Very happy with it.