21 Best Insulation For Vaulted Ceilings (2023 Updated)

I used it to darken out the light in my rv for working night shift. I just cut the length only and it slid perfectly behind the shades. I could have taped around the edges if I wanted complete darkness.

Just a couple of places I could still see light. Bonus is the insulation. Which at first I was just looking for something to easily block out the light. I took a quick pic and didn’t clean up. Lol.

Trailer park window treatment. Easy to put up, adjust. Works really well w Alien Tape. Keeps trailer comfortable summer or winter. Ages well. Cheap, too. ks

Used as liner for my aging garage door as insulation. A little bit of cutting and it worked like a charm. Will see how it does over next winter. Whether it makes a difference or not.

Purchased to wrap our main heating duct. Noticeable improvement in the efficiency of our heating system. It was somewhat awkward work to apply and tape into position, but this was a retrofit, so it was not unexpected.

It was worth the effort and expense. :).

My miscalculations of garage width was a blessing in disguise. Ordered one more to complete and will us the remaining on another part of my house. Sturdy, easy to work with and should add 5-9 nore R-value of comfort.

winter and summer. Quality and price point id outstanding as well!.

I used this in the attic, basically stapled to rafters above the normal attic insulation, I noticed it dropped my electric bill considerably when done. Acts as a UV reflectant and keeps the attic temp lower where the AC ducts are.

Great costumer service! The man in the back was very helpful, unfortunately I did not get his name to give him credit.

Used it in my shed that I use as a workshop. Helped keep it a little warmer by blocking the air gaps and the foil helped reflect light, which was another benefit for me.

Purchased these panels to insulate our garage doors. Worked very well. Panels are easy to fit easily. Large cuts you can snap it like drywall. A serrated knife worked well for smaller cut-outs. A little tricky not to snap a panel when installing though.

Some good YouTube videos helped with some tricks. Wish the product writing wasn’t on both sides so you didn’t have to see it once installed. If you are concerned how the finished product looks, be sure to cut and install with all the logos going the same way.

Overall, these are highly recommended.

This product is great for situations where insulation for heat or to dampen ambient noise is desired. Even better is that it can be laid over existing drywall, including ceilings. We’ve installed it in our bedroom to dampen ambient noise from units above our Condo and we’re pleased with the results.

If memory serves, I did a 13X10 room in about 4 hours or so, by myself on a ladder. The tiles are so light that I was able to easily hold them overhead with just one hand as I screwed them down to the ceiling with the other.

I also used and recommend an adhesive as well (I used Liquid Nails and a caulking gun), as that helps ensure the whole tile sticks to the ceiling, as did duct taping the seams. Cutting these was simple.

Score it deeply with a Utility Knife and bend the surplus back, slice the foil on the reverse and it easily separates.

It’s good. I installed it on my garage doors after reading online reviews that it makes the garage not loose heat and does not let’s cold creep in. I definitely see that the panels are warmer than the hinges.

Earlier entire door was cold now only the hinges are cold. So I would say 85 percent of the door is blocking the cold out to a larger extent. Which is substantially good. I can put the bubble wrap insulation on hinges and panel liners, but just a little lazy and so far it’s not making the bottles freeze in the garage.

M in Brampton west, Ontario. I like the product, it was easy to cut with regular cutter or a knife. I used the regular cutter & was able to snug fit in the door panels. No need of glue. Yes I recommend it as a nice cheap alternative to replace a garage door just for insulation.

IšverstiShow in original languageI bought this door for a horizontal application (attic access door) and ran into two issues that could be avoided with an improved design. 1) The little latch that is used to open the door from the inside, will drop due to gravity and prevent the door from locking when trying to close it.

It is a thin metallic plate that pushes the latch to open it, but if it covers the opening, you can’t close it. My solution was to drill a tiny hole in the metal and insert an unfolded paper click through it to keep the plate in place above the latch hole.

If I need to open the door from the inside, I can simply remove the paper clip and push the plate down. 2) The other issue is that given the door is about 30 pounds, there is no way for anybody (even 2 people) to reasonably keep it horizontal and stable while drilling the necessary holes.

My solution was to drill 4 holes on the edges so that I could use hooks to keep the door in place and hanging from the beams above. I used the ratcheting kind to slowly pull the door up and keep it stable and in place while I drilled the holes.

Thanks.

IšverstiShow in original languageDoor was exactly what I wanted to access new attic storage space. Door was primed to allow paint match with existing wall. Door hinges are strong so the door swings open and closed well.

Door key mechanisms did not quite line up properly. I was able to adjust mechanisms using sewing machine oil and a screwdriver. Overall happy with the results.

IšverstiShow in original languageI struggled to find a 23”x36” fire rated ceiling access panel until I found the website for Best Access Doors. I called 5 min before closing on a FRIDAY. You took my call, physically verified stock and took my order.

Like you promised the door shipped MONDAY morning AND I RECEIVED and installed it Tuesday am. The quality is excellent and I couldn’t be happier. I passed my CO inspection on my multi-family project on time.

Thanks !.

IšverstiShow in original languageInstallation was easy. Door looks great. Exactly what I wanted. The only negative is that the latch doesn’t work as well as I’d like. When I close the door I have to push a screwdriver in the gap between the frame and the door against the latch to get it to engage completely.

Not a biggie, but it took me a couple of days to figure out what I needed to do. If I don’t do that, the door will eventually fall open. Even when I do that, the door will still fall open if there is severe shaking in the house such as when a reciprocating saw is used to demo a wall.

Again, not a biggie, but you might want to open the door before doing demo to prevent it from slamming down. Overall, an excellent product and good value. Would buy again.

IšverstiShow in original languageMissing “ALL” paper work keys/pull handles etc. One latch doesn’t work! Flange damage in shipping maybe? Box was in good shape. Waited over a month for keys/pull handles to show up.

I’m a Union Sheetmetal Worker by trade so fixing the damage was no big deal but replacing components would have been a task due to the design of the door. I was not happy having to buy this to begin with (especially for the $$$) because this is WELL within my skill set and I knew i was buying a tin can P.

O. S. But I need the UL sticker if I was ever to sell my home. So thanks for nothing.

IšverstiShow in original languageHave a suspended ceiling with 2 – 2’x4′ tin ceiling panels installed above the stove. Used this insulation on top of the tin ceiling panels for fire safety. Rest of the suspended ceiling in the room has fiberglass insulation above it.

Like that it is heavy enough to hold the tin ceiling panels down in the suspended ceiling’s metal grid. No more cold air coming in from above the stove.

IšverstiShow in original languageThis product was not made to the specifications of the hard top for my 2015 Wrangler 4 door. The rear panel fit perfect. The Center panel did not cover the area back in behind the speakers.

The 2 front panels were not big enough to cover the inside area of the t-tops. The product looks and works great if it was made with the correct dimensions.

IšverstiShow in original languageExcellent product, does the job very well. Installation was really easy. Heat inside the JEEP was way less after installation and insulation was really good. The only thing I would change about this product and is also the reason for my 4/5 rating is the installation method (Materials used).

It came with many pieces of Velcro stickers, now the issue with Velcro is that they make little noise when moving like static noise or something. I wish they used normal double sided 3M table or at least the plastic type Velcro used in more heavy duty application because those don’t make any noise with slight movement.

Finally, I would like to add that it also give a very nice interior look to the jeep.

IšverstiShow in original languageLiving in Florida is really hot and humid. We bought these roof liners and what a difference! They are fantastic! I was concerned thinking it was going to be too dark because I am used to the white roof but there is no major change.

Very happy we invested in this. They give you just enough Velcro strips, maybe they could have put a few more in the bag because I could have used them although so far no problems with the amount I got.

IšverstiShow in original languageFIberglass is basiclly fiberglass. Get the cheapest you can to cover. The OC stuff is no different. Plus is the free 24 hr blower rental when you buy 10 or more (a coupon that the rental desk has has to be scanned to get free rental).

Pretty easy to blow though getting the hose straight and ready to pull through may be difficult if you don’t have the space to straighten it first. About 100′ of length which I needed despite proximity to attic hatch.

Go early and get enough of the depth guides. Also make sure all openings through the vapour barrier (light fixtures, vents, etc. ) are sealed. Pretty easy to blow the insulation. Didn’t suffer any blockages using 40 bags.

The trouble is with splitting the bags. You have to cut deep or it is difficult to break into halves. Blade on the blower to cut the bags open may not be sharp so you may have to cut a starter slit. Block may not feed into the hopper smoothly so you may have to give it a nudge.

IšverstiShow in original languageI got the Atticat attic insulation blower “FREE” with our purchase of 18 bags of pink loose attic insulation. The remote didn’t work when I tried to use it right from the start, on the machine.

I then proceeded to blow the whole attic, without shutting down while repositioning my self for the next cavity filling location, not happy at all. I tell the clerk whom I received the tool from and he later tells me it was the battery.

I then comment that maybe you should check the tool before you release it to a customer, ” Then we would have to take it apart”. The thoughts running through my head after that statement, were not good.

The attic turn out ok, but it could have been much better if the tool was ready for the customer, before he dressed and climbed into an attic. No apologies and not credits for this fiasco.

IšverstiShow in original languageHeard that they were slow to use but got one anyway to insulate a large attic. Went through 45 bales quickly. Perfect speed while climbing around the attic. Very happy wiyhis this tool and system.

Just purchased this to block some heat on a wall full of windows that faces west in the hot QLD sun AKA my office. It’s made at least a 5c difference in temperature and has cut a lot of the radiant heat.

I’d say it’s great bang for buck. I was looking at other solutions that cost in the hundreds of dollars. As renters, we don’t have the option to air condition the room at this point, so it’s a great way to cut the heat in a room I spend most of the day in.

It works very very well. You can put a single layer double layer or triple layer on to meet whatever requirements you have. It works so well I order a 50 foot roll. I recommend you give it your full consideration.

My neighbor has some and it works very well also.

I purchased this reflective insulation roll for a custom-built sauna. It does a wonderful job.

Each piece is individually packaged. Minor edge damage on one. Prompt delivery

Great stuff for Lining return air closet. Expensive but worth it! Arrived ahead of time and packaged perfectly to avoid being crushed. Could not be more pleased with the purchase of 5.

Nice product. Used it to reline an air handler. Much quieter now.

IšverstiShow in original languageThis 24″ x 36″ fire rated insulated access panel worked very well for our application. Arrived in good condition! My biggest fear of getting something this large was the possible damage in shipping, but not.

Happy with purchase. Shipping costs could be better if the price of fuel would go down!.

IšverstiShow in original languageWell built. nice finish. The locking cams were almost impossible to operate/latch, they needed to be “adjusted” to operate more easily. Otherwise, quite happy with the product and the ordering/delivery.

IšverstiShow in original languageVery disappointed!!!! I am sure I ordered an access door without a drywall flange. The one I received created a lot of extra work to fill sand and repaint the wall surface.

If I had received the one I ordered it would have been a simple matter of cutting then drywall and installing the access door and the job would have been complete. As it is I had to get the drywall person back an then the painter plus two extra days before we could complete the job.

Not impressed.

IšverstiShow in original languageUsed these on some transit bus reworks. Easy to work with and performed great !

IšverstiShow in original languageThis shirt is as versatile as they come. Throw it on with jeans, chinos, or shorts and you are good to go. A light sweater? No problem. Even a blazer for date night makes this shirt a go to for most occasions.

IšverstiShow in original languageThese are literally the ONLY solid-color tees my picky, quality-conscious 16yo son will wear. Everything is perfect — the fabric, the fit, the thinner neck seam, etc.

Our ONLY request is for more fall-like colors – maroon, brown, etc.

IšverstiShow in original languageAlways a great fit. Always feel great. Always comfortable. Marine Layer is automatic.

IšverstiShow in original languageMy contractor was working on our 2-room addition when he highly recommended we sheet the outside with LP Tech Shield, he brought in the stiffed room, used a 4’x4’ piece with 4 high intense work lights, placing the only 5 inches from the surfaface, let them go for 15 minutes each to heat the one side, then asked us to kneel down on the other side and asked us if we could feel any temperature difference.

Needless to say we did not, as a result we asked for him to please use it…. our double room addition is more comfortable and and very consistent compared to other room LMS in the house! We are considering replacing our siding just so we can get the LP Tech Shield applied for other rooms!.

IšverstiShow in original languageBeen using Tech Shield for over 13 years with great success! My HVAC guys love to install their equipment in my attics in the summer- it stays about twenty degrees cooler than any other contractor’s attic.

I don’t understand why all contractors don’t use this product!.

IšverstiShow in original languageI own a 100 year old two story home in Arizona. Reroofed several years ago with red metal and had TechShield installed first. Upstairs bedrooms are considerably cooler.

IšverstiShow in original languageI got Ceilume drop-ceiling insulation, and it’s *awesome!*. I liked it so much I got a second order for another room. I got it for sound insulation, and while I’m happy that I was cautioned it wouldn’t give much sound suppression from neighboring offices (to keep my expectations modest), it’s at least a 50% reduction in sound.

probably closer to 60-70%. It’s particularly good with higher frequencies, which tend to penetrate walls more. I can no longer make out the content of words in my neighbors’ conversations; it’s just a muffled sound of voices.

I’ve told my landlord about it, and they may use it for other offices with noise problems. It proved to be a very cost-effective, and so far effective, solution. Five out of five!.

IšverstiShow in original languageI used these in my basement washroom where the ceiling was low and I used Genesis PVC ceiling tiles. There was HVAC duct above the ceiling so these were thin enough to fit between the ceiling tile and duct.

Prior to installation, the bathroom was very echoey. After installation, you could no longer hear people use the washroom from the adjacent rooms.

IšverstiShow in original languageI installed this a couple months ago in my new bathroom and love the look. However it is very flimsy. After putting the insulation on top of it I noticed bulges in the tile.

Just hoping it hold and tiles don’t fall out.