Stair treads are designed to provide a safe, slip-resistant surface for walking on stairs. They are usually made of wood, metal, or rubber, and are attached to the stairs with screws or nails. Glue is sometimes used to secure the treads to the stairs, but it is not necessary.
All surface and all purpose indoor/outdoor Gorilla construction adhesive provides a heavy duty bond that does not shrink. Adhesive is permanently flexible, perfect for joints with heavy movement and stress.
Gap filling is great for dissimilar surfaces. Holds in 30 seconds, 100% waterproof, low odor, paintable, and is VOC compliant. Bonds to subfloor and decks, trim and paneling, mirrors, foamboard, bath surrounds, landscaping, granite and marble, drywall, and more.
After 40+ years of doing many different types of simple DIY jobs around the home (and using Lepage PL construction adhesive), this product by far surpasses it. Gorilla glue holds & binds to every known (dry) construction material surface: lumber, natural wood, pressure treated lumber, MDF, wood composites, cement, brick, steel, aluminum, styrofoam, resin plastics, rubber, ceramic tile).
Dries fast, no smell, and NO toxic off gasing, so you can easily use this product inside any home where fumes from petroleum based solvents are an health issue. Easily washes off your hands with soap & water.
I now only buy my glues from the entire Gorilla product line. After years of using other products, that either failed to hold, or took too long to dry, and really smelled bad (if you are sensitive to construction product smells).
It’s well worth the price for peace of mind in any application where you might not be so sure if your mixed-type of material surfaces will bond correctly or securely by using another product (i. e. in bonding different types of materials together).
Great for exterior projects as well as interior applications.
You know how you say “oh I’ll do it tomorrow “. well tomorrow takes a few days to come around and finally the tomorrow rolls around months later. Gorilla Heavy Duty Construction Adhesive saved my gutters that started to separate and held on perfectly.
I also has some cracks in the sunroom what I needed to fix by replacing some metal and wood. I cracked up because I didn’t need to use much effort or man power at all, I a woman did it, I was ecstatic that it was so effortless yet well repaired.
It rained and stormed and heavy winds, you could call it tornado weather in the South. My gutters ere still affixed and no leaks in my sun room. What a great quick fixer upper Gorilla Heavy Duty Construction Adhesive has become in my house.
This might be hard to explain. I recently bought this item cut the tip off inserted into my caulking gun would not come out inserted a nail into the nozzle thinking it had a cover still nothing. felt down the container it was soft.
Had to use a hacksaw about an inch down from the top as it was harden somehow like a puck. So then I had to use a piece of wood to push out to adhesive and a putty knife to spread it. Lucky I needed all the adhesive for the job.
I do not know if this item sits to long on the shelf it would harden since this is not a cheep item. The adhesive still did the job but the application did not work as intended.
3M Hi-Strength 90 Spray Adhesive is a fast-drying spray adhesive that bonds to concrete, wood, laminates, polyethylene and more. It’s extremely strong bond gives you fast results to keep projects moving forward.
This industrial grade formula is easy to dispense and can be applied directly to surfaces. 3M Hi-Strength 90 Spray Adhesive also provides heat and moisture resistance.
Solvent or water-based adhesives available in a variety of open times, these useful adhesives are usually rolled, brushed or sprayed on the two surfaces to be bonded and allowed to dry to the touch. Substrates bond almost instantly when the surfaces are Reaching a minimum of 1,000-psi overlap shear strength, 3M Structural Adhesives are designed to bond the load-bearing parts of products.
Does not work very well / does not stick very well. I tried this because I can’t handle the VOC’s in standard adhesives anymore. If you are like me, and need to use this, some tips to help: Before opening, shake the contents very well for at least 5 to 10 minutes (this stuff like to separate, so shake it well), apply heavy with a brush or roller to both materials to be bonded together, hit it with a hair dryer for a few minutes, wait about an hour, then apply a second coat, hit it with a hair dryer again for a few minutes, wait about an hour, stick the parts together and keep them pressed together for about a day.
Then put somewhere in a warm dry environment (about 80deg F) for a few days to 2 weeks. That’s what I had to do to get it to stick together. After that, it seems pretty well stuck.
This stuff is water based, so it washes off easily, but once it dries, you either rub it off or wipe it away with a cloth soaked with lacquer thinner. Works wicked well for gluing synthetic fabrics to solid structures and other fabrics.
Paint it on the structure with a China bristle brush and let it dry. It’s then like a Post-it note so you can reposition the fabric until you get it exactly right, then rub it down to stick it in place and iron it with a 250 degree F iron to lock it.
Oh no, I screwed it up again! No big deal, just peel it off and try again: rub & iron. Then paint some more Fastbond over the top of the joint and wipe away any excess with a good paper towel before it dries.
After an hour or so, iron it down at 250 to lock it all together, then paint over it with a water borne paint, if you wish. Good stuff!.
First time user so we decided to use the “green” version to assure product was ready for contact. There is no odor to this product. Product was used in a confined space (rear berth of a sailboat)to adhere vinyl liner to the sides of the vessel.
Easy to apply with brush or roller. Went on blue dried green in about 30 minutes. Easy cleanup if you don’t let it dry, otherwise use mineral spirits. Throw away brushes and roller covers, it’s not worth trying to clean up.
Product worked as advertised and I would strongly recommend for use where odor from normal contact cement is unacceptable. Hardware Hut beat all prices.
A polyurethane construction adhesive that provides superior results and is safer to use. It generates three times the power of ordinary, traditional adhesives. It may be used inside or outside and will last as long as the surfaces it joins together.
It bonds to a vast array of materials such as wood, metal, OSB, drywall, stone, masonry, concrete, bricks, vinyl, plastics and foam. This versatile adhesive can be used for many different projects, including subfloors and construction joints.
This product meets or exceeds ASTM D3498 and conforms to HUD UM60a; ASTM C557 and APA AFG-01 specifications.
It’s been in use for at least 75 years. It’s what holds your windshield in place. How many of those have you seen fall out? It’s a structural adhesive. It also cures in moisture. This means if you want it to cure faster, spray water on it.
It’s also available in quick set versions that cure much faster. Also, it’s important to get fresh urethane. Normally the bottles will have dates on them. If they are old they do not flow well out of the caulking gun and your hand will grow in size.
If you run out on the job, and you don’t care if the color is black, go to your local auto parts store – they will have it. The nice thing about Home Depot’s urethane selections? They are available in White, Beige, Grey and Black.
Once you understand the power of Urethane you will also understand that it is the ultimate RV sealant. Seal it once – for 50 years !!!.
Without exaggeration, this adhesive strongly bonds almost anything to anything. I no doubtfully love its performance, ease of use, and the low odor feature. An issue I like to report is about the curing process.
The Home Depot web site claims that it fully cures in 24 hours. Therefore, I glued a floor molding bracket (galvanized steel) to a concrete floor and pushed the molding into it 24 hours thereafter. It resulted in part of the base coming off the floor.
Apparently, the maximum bonding power is not yet reached in 24 hours, at which time the adhesive has not completely hardened. I would give it at least 48 hours before trying to apply any load.
Heavy duty latex based adhesive. For interior and exterior use. Bonds wet of frozen lumber and bridges gaps up to 3/8″. Open time of 20 minutes ensures good adhesion contact and strong bond formation.
Prevents squeaking. Low VOC. Extremely strong and durable bond. Water cleanup. Recommended for increasing the structural integrity of walls and subfloor systems using plywood, wafer board, lumber and treated lumber, particleboard and foam board.
Subfloor and deck construction adhesive. Overall product weight: 2. 72.
Was looking for the liquid nail adhesive in the gold and blue cardboard tube, but the store was out of it. Got this instead cause it also said construction adhesive, and that it bonds all types of woods.
Sorry, but this is nothing but silicone caulking. This will work if your wanting to seal around some windows or doors, but if your wanting to bond something permanent, then get the original liquid nail in the gold and blue tube.
I used this product to hold some new cabinet boards together. It actually hold pretty well. The product comes out very smooth just need to be careful on the aperture not to make a large cut or it would come out as a clump, over saturating the working area.
With the assistance of some clamps and a 24 hours waiting the wood stayed strongly bonded. It most be careful not to saturate the material and immediately clean the area. The one downside its the container as the cartoon easily bend at the end and loose the shape for the dispensing gun.
Also need a way to close the tip for continue reuse or it will harden and waste.
We love our Liquid Nails-Heavy Duty! We have used it all over the house on several different things. We did use it on wood, concrete, on drywall and several other things around the house. It’s super easy to use as long as you have tools you need to use the product.
It goes on like glue and takes a bit to dry but it works great for filling in gaps. You can pretty much use it on almost anything. The instructions are very clear and easy to understand. Applying it is so easy and it doesn’t take much to do.
I love that we can use it on several different things and not just one thing. It actually last awhile too. I was thinking it wouldn’t because it don’t look like much would come in the tube but it lasted for quite awhile and we used it for several things before we started getting low on the liquid nail glue.
I also love that it’s water resistant, which is so helpful! I have recommended it to friends and family. We plan on buying more and continuing to use it!.
Gorilla Glue’s Maximum Strength Construction Adhesive is their strongest construction adhesive, two times stronger than the original formula. Max Strength Clear combines the strength and versatility you have come to expect from Gorilla with a crystal clear, non-foaming formula.
It’s all-weather, 100% waterproof, formula, bonds to various surfaces such as glass, tile, wood, drywall, plaster, brick, ceramic, concrete, masonry, foam board, and more. Max Strength Clear comes in a 9 ounce cartridge for easy dispensing.
After dispensing, items are repositionable for 30 minutes.
Gorilla – Gorilla Clear Max Construction Adhesive is a MUST HAVE for every household. There is NOTHING that this adhesive cannot mend for you, except perhaps a broken heart! I have used it to seal cracks around windows, repaired a broken piece of pottery (it’s Clear, no worries).
Any item that has been damaged or is broken, Gorilla – Gorilla Clear Max Construction Adhesive will strengthen it back to useable again! GREAT PRODUCT!.
Good stuff. We have a granite countertop, and the undermount stainless steel sink was seperating from the granite. I took the undermount supports out, chiseled everything out, sanded, and cleaned really well to re-attach.
I just wasn’t sure which adhesive to use. I called Gorilla, and their customer support is great. They recommended this product with mechanical support. A little goes a long way. I only used about a quarter of the tube, and i was worried i needed more, but this is incredible strong.
It’s only been a few months, and I will update if theres any changes, but everything has held up great. Just be careful with spillover/runoff.
I was given a bathroom countertop. I wasn’t sure what to do with it. I glued a piece of plywood to the bottom, closing the sink opening. I spread a layer of Gorilla Glue, on the wood and clamped it to the countertop.
I’ve haven’t used Gorilla Glue before and curious about the strength and hold. It was dry within 24hrs. I secured the top to a metal cart base. I filled the sink opening with river rock. Instead of grout I used glue.
Gorilla Clear Max dried clear! The rocks are secured and stand out nicely! I now have a kitchen island, with a place to put hot pans. I’m impressed with the versatility of the glue!!! My new go to for projects!!!.
100% waterproof. Ideal for metals, ceramics, plastics, stone, and other porous/nonporous materials. Superior for wood to wood connections. Excellent sandability and is unaffected by stain. Thicker formula provides no-run, no-drip performance.
Will not become brittle with age. Will not expand or contract in wood joint. Sets in 1 to 4 hours. Apply above 50 deg F. Cured Product 0 deg F to 200 deg F.
Details: Safecoat Almighty Adhesive is a solvent-free, environmentally safe, non-toxic, high-performance construction adhesive for use in a wide variety of applications. It does not off-gas and has almost no odor, so is safe for use in enclosed or poorly ventilated spaces.
It exceeds all VOC and environmental regulations. Almighty Adhesive provides 500 PSI shear strength, more than enough grip for most applications.
First time with a ‘green’ product such as this. Had a project inside a small basement room with inadequate ventilation, and was concerned about using the typical products available that are hazardous.
I had to sniff this stuff directly from 2 inches away to be able to discern any odor at all, and even then it was hardly objectionable, faintly resembling a vinegar type odor. Being a former finish carpenter I can assure you that this is not the case with ‘regular’ construction adhesives.
Thank God for the Almighty, well thank Green Building supply really! We did an addition and some remodeling recently and the mandate went out: “no toxic materials”. All craftsmen were instructed that they will not use any fuming toxic glues, paints or materials so they had to list the materials needed that had to be ordered from GBS.
When I noticed a case of construction adhesive that the guys were using to glue a subfloor and smelled that, instant headache, so I stopped the job and said “I told you none of this!, why didn’t you say you needed glue?” Bought a case of Almighty and then let them finish.
I have been using the Almighty on various smaller projects and it bonds fairly quickly and is holding on everything so far. The best thing is that I can use it without a respirator, or mask and be able to breathe fine and not go into a coma!.
Gorilla Glue strength in a dries white formula. Ideal for most household projects, Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements.
Incredibly strong, Gorilla Glue is known for its industrial holding power and versatility, regardless of the surface.
All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. White Gorilla Glue will stain skin and ruin clothes. 3 Easy Steps: 1. Damp it: White Gorilla Glue is cured with moisture. Lightly dampen one surface with water. Do not add water to bottle. 2. Glue it: Spread a thin layer of White Gorilla Glue on other surface. A little goes a long way. Do not over apply glue. 3. Clamp it: Clamp objects together for 30-60 minutes. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Note: Do not microwave or heat. Do not over apply glue. A little goes a long way. While curing, glue will expand 3-4 times creating an incredibly strong bond line. Be careful of squeeze-out. 3 Easy Steps: Damp it (Lightly dampen surface. Do not add water to bottle): To activate Gorilla Glue. Glue it: Expands, use sparingly. Clamp it: For an incredibly strong bond. Storage: After each use, wipe nozzle with a dry cloth, and tightly replace lid. Store in a cool, dry place. Not recommended for use on polyethylene or polypropylene plastics.
Eye & Skin Irritant: Store away from children and animals. Read cautions on back panel. Store away from children and animals. Eye & skin irritant. May produce allergic reaction by skin contact. Do not swallow. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Do not microwave or heat. Do not leave in hot vehicle. May cause sensitization by inhalation and skin contact. Individuals with chronic asthmatic conditions should consult a physician prior to using product. May cause gastro-intestinal blockage if swallowed. Contains: Aromatic Polyisocyanate based on MDi, 2,4 feet-diphenylmethane diisocyanate (MDI) 4,4 feet-diphenylmethane diisocyanate (MDI). First Aid Treatment: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186.
Reviews From Real Customers
I followed directions, but still messed up putting a broken cherub head back on after it tumbled during a recent move. Okay, so I added more glue to get it to finally stick, and set the head for the night, but by morning it was a messy mess.
The head is attached, but now the cherub needs a flower necklace to cover it up! My hairbrush fell to the floor just perfectly and broke, so I tried Gorilla Glue again with high hopes, but nope. Had to toss it out and buy a new brush.
I might try again, but not impressed. *** I’m sorry, but for some unknown reason I cannot download a picture here to this site from my phone and/or laptop.
This doesn’t hold up at all compared to the spray that lady used in her hair. She had me sold. So I thought since it literally kept her hair I. Place two months I’ll go with something a little less drastic.
So I bought the quick adhesive glue. This adhesive bubbles up to make pastie type bubbles on anything you are glueing, it almost looks like dried cellophane. Then a few days later the hold decreases and the project falls.
I definite don’t recommend it. It’s as strong as plastic tape. I’ll try the spray kind next time. If that real as strong as that lady proclaimed. #.
I love this glue and it’s so much better than super glue. I use it on almost everything such as wood, metal, glass, ceramic, jewelry and even my frig handle. Its great for craft project foam. It is very strong holding and dries in less than 60 minutes.
I like hat it is waterproof too. It’s better than duct tape. It is my to go glue. Don’t have to use alot because it only takes a little bit. If you put to much it takes longer to dry. I used it today on my favorite frog cup and you can’t even see where the handle broke Best glue ever.
Heat-resistant, water-resistant, indoor/outdoor use
Reviews From Real Customers
I had purchased this product previously but didn’t have a can left and didn’t know how many square feet it would cover. I sincerely appreciated being able to talk to a real person to get an answer as to how many square feet can we cover.
The customer service representative was quick, answered my questions and help me make a decision. This product is amazing. It’s not available where I live and Hass to be ordered online. The water-based version of this doesn’t hold.
This version is bomb proof. So if you’re unsure choose this one.
I’ve used Weldwood Contact Cement forever but this product is getting hard to find in California probably because of strict California chemical laws and the green version of this product just does not work.
And many other states don’t want to ship anything that is the least bit hazardous to California. I’m thankful I was able buy it on Walmart. Thank you Walmart.
I use this in a somewhat unusual way that requires flexibility. Follow the instructions and it will hold forever. Cleanup with paint thinner. There are other much more expensive products that I avoid.
Humidity, temperature and direct sun can affect how this bonds so keep that in mind. Try a test with it first if you haven’t used it and then try and peel it apart. Porous materials require a second coat.
The first coat will reactivate with the second coat. You don’t need to over saturate a porous material – keeping some of the pores open helps with proper drying and bonding.
Incredibly strong and ideal for indoor and outdoor applications Gorilla Glue is known for its industrial holding power and versatility regardless of the surface. 100 waterproof and doesnt break down when exposed to outdoor elements.
So versatile it easily bonds wood stone metal ceramic foam glass concrete and much more. Expands 3 times into the materials to form an incredibly strong bond. Temperature- resistant making it unaffected by hot and cold temperatures.
All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla glue will stain skin and ruin clothes. 3 Easy Steps: 1. Damp It: Gorilla Glue is cured with moisture. Lightly dampen one surface with water. Do not add water to bottle. 2. Glue It: Spread a thin layer of Gorilla glue on other surface. 3. Clamp It: Clamp objects together for 1-2 hours. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Full cure in 24 hours. Note: Do not microwave or heat. Do not over apply glue. A little goes a long way. While curing, glue will expand 3-4 times creating an incredibly strong bond line. Be careful of squeeze-out. Storage: After each use, wipe nozzle clean with a dry cloth and tightly replace lid. Store in a cool, dry place. Store away from children and animals. Not recommended for use on polyethylene or polypropylene plastics. Store away from children and animals. 3 Easy Steps: Damp it (Lightly dampen surface. Do not add water to bottle) to activate gorilla glue. Glue It: Expands, use sparingly. Clamp it for an incredibly strong bond. For more information see back panel.
Contains: Polyisocyanate Prepolymer Based on MDI, 4,4-Diphenylmethane Diisocyanate, Polymeric Diphenylmethane Diisocyanate, Diphenylmethane Diisocyanate (MDI) Mixed Isomers.
Eye & skin irritant. Store away from children and animals. Read cautions on back panel. Not recommended for use on polyethylene or polypropylene plastics. Eye & skin irritant. May produce allergic skin reaction. Do not swallow. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Do not microwave or heat. Do not leave in hot vehicle. May cause sensitization by inhalation and skin contact. Individuals with chronic asthmatic conditions should consult a physician prior to using product. May cause gastro-intestinal blockage if swallowed. First Aid Treatment: If swallowed, call a poison control center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water and gritty soap. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186. This product contains a chemical known to the State of California to cause cancer.
Speed Set Wood Glue from Titebond is an extremely fast-set, high solids PVA adhesive, which provides exceptional gap filling properties to develop a bond stronger than wood. Pre fitting is recommended! Open assembly time is 2-4 minutes at 70 degrees; an 8-10 minute total assembly time and a total clamping time of about 15 minutes.
Speed Set offers excellent sandability, is unaffected by finishes, and increases productivity with a shorter clamp time. Its also visible under black light, which makes it easier to find during cleanup.
From Franklin of USA, described as an APP (Advanced Proprietary Polymer), Titebond III has been formulated as a dedicated wood glue to give you the ease of application of aliphatic/PVAs and the water resistance of polyurethane glues.
Making an exceptionally strong bond on wood-to-wood joints, it has longer open time and higher viscosity than conventional PVAs and will maintain integrity at lower application temperatures. All of which makes for easier and less fraught assembly procedures.
Polyurethane glue has undoubted flexibility of use and massive strength but is a very persistent adhesive, difficult to clean up from equipment and particularly hands. Titebond III has been designed to give you the strength of wood-to-wood bonds without the problems.
It cleans up with water whilst wet, sands off without softening when fully cured, is unaffected by finishes, solvent and heat and is mildew resistant. It is suitable for interior and exterior use. Please shake bottle well before use.
Titebond III Ultimate wood glue has been independently tested for lead, cadmium and other metals under ASTM F963 and 16 CFR 1303 (total lead content). These are the testing methods specified for toy safety under the U.
S. Consumer Product Safety Commission. It has also reviewed by an independent toxicologist and conforms to ASTM D4236 for art and craft materials.
Gorilla Super Brush & Nozzle offers 2 easy ways to dispense for control and accuracy. Brush & Nozzle features a precision tip nozzle and fine bristle brush that allow the user to control their super glue application, making it perfect for any project.
Developed for long-lasting repairs in an instant, Gorilla Super glue dries fast.
BACK TO BAZIC Our goal is to provide each customer with long-lasting supplies at an affordable cost. Our commitment to these values is reflected in our dedication to improving current products and developing new exciting products for our consumers.
SUCCESS BASED ON SATISFACTION Headquarters in Los Angeles, California, United States. Our success stems from individual consumer fulfillment.
This contact cement is one of the best around. It lasts long and it is a pleasure to spread. I have tried other contact cents, such as Elmer’s, Super Glue, Gorilla Glue, to name a few, and I prefer this one.
Gorilla Glue Spray Adhesive Heavy Duty 4 oz- Forms a clear, permanent bond that is moisture resistant and can be used both indoors and out. This spray adhesive is also photo safe. Its wide pad nozzle and controlled, fine mist spray provide an even application.
Can be repositionable if moved within 10 minutes. Not recommended with vinyl, automotive headliners, polypropylene, polyethylene, or similar materials.
Wood Adhesive. D4 Wood Adhesive is a solvent free industrial grade D4 wood adhesive based on the latest hybrid resin technology. The result of several years work, D4 Wood Adhesive provides the user with a waterproof D4 grade wood adhesive with none of the safety issues associated with conventional isocyanate containing (polyurethane) D4 grades.
D4 Wood Adhesive can be used internally and externally and gives a high strength, water, impact and temperature resistant bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, assembly line work, RF/HF cure systems, wood on wood laminating, furniture assembly and household DIY use.
Dries clear. Easy water cleanup. Conforms to the international standards EN 204 (D4) and WATT 91. Independent test certification is available on request.
Glue performance, brilliant, very strong. The only niggle is the size of nozzle. Not being adjustable (or not sufficiently adjustable), it dispenses at a reasonable rate for small jobs, but becomes a struggle for large jobs requiring a faster stream.
Gluing P5 tongue & groove flooring, even with ambient temps around 27deg C allowing the glue to run more freely, I had to squeeze the bottle with such force and for a prolonged period, that it became a torture for my hands.
Maybe I should have cut the nozzle, but then it would not be closable. A simple redesign of the cap would allow improved flow adjustment and closure.
Good waterproof performance where needed but not needed for the majority of applications where indoor/outdoor 502 glue is fine and considerably cheaper. 6 months’ unopened shelf life which is quite short (502 is one year), so will be less once opened.
This is too short for the amounts I use so smaller bottles would be helpful (but this manufacturer doesn’t do them). The same brands are available as 500ml bottles so why not this stuff? Personal experience has shown that the glue is fine after longer periods than the manufacturer states but don’t know if thre’s any performance loss.
Main criticism is that the sesign of the spout on the bottle is too restrictive and tends to block quite easily.
One of the ultimate wood glues. A great waterproof glue. As a boatbuilder I either use D4 or epoxy. However have you seen the price of epoxy, then theres the fact you cant pick it up just round the corner then theres the problem of mixing it.
D4 though is a great glue, the quick hold is a good advantage and so far the hold has been excelkent.
This glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.
This glue can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. This glue is easy to use, non-toxic and cleans up with water.
Proven performance over ordinary super glues. Works faster and holds stronger on more surfaces than other instant bond adhesives. For use on textiles, wood, china, ceramic, rubber, paper, metal, most plastics, and more.
After much experimentation, we have come to the conclusion that the best glue for stair treads is a product called “Super Grip. ” This glue is specifically designed for use on stair treads and has an aggressive adhesive that will hold the treads in place even on the most slippery surfaces.