Best Efi Live Tunes For 6.7 Cummins (2024 Updated)

DiabloSports 3rd generation inTune, the “i3”, brings the same DiabloSports 3rd generation inTune, the “i3”, brings the same the brand as a “must-have” for performance enthusiasts. The inTune i3, while designed to keep drivers equipped with added horsepower and torque, is also available with 50 state certification.

Now performance and compliance are bundled to deliver more for your car, SUV, or truck paired with assurance knowing you are covered at your local smog or emissions center. 50 State CARB (California Air Resources Board) certification is critical for vehicle owners that drive daily and recreationally, and not just in California! DiabloSport has made the investment in time and resources to keep your vehicle in compliance without sacrificing any power or cutting corners.

Eliminate Pegging. If you have a heavily modded Lightning that’s putting down serious numbers, chances are good your wimpy factory MAF just isn’t able to keep up. If your factory 80mm or 90mm MAF just isn’t able to keep up with your mods, it’s time to step up to an SCT Big Air Maf.

The SCT 90Mm Big Air Mass Airflow Sensor Ba-3000 is your solution when you’re serious about putting down big numbers in your Lightning. Ideal for Superchargers. For your Lightning, an SCT Ba-2600 Big Air MAF is the ideal choice for your supercharged engine.

If you are a horsepower junky and you need a fix, look no further. DiabloSport’s inTune i3 Performance Programmer is an easy way to boost power without even popping the hood! You get a performance upgrade that makes your throttle more responsive, optimizes drivability, and even adds some bottom-end horsepower! The inTune i3 programmer is pre-loaded with dyno-tested performance programs designed specifically for your car or truck.

Within minutes, you could add horsepower and torque with no other tools required! This product is not street legal and may only be used on Racing Vehicles. Racing Vehicles must be used exclusively for racing or other forms of competition.

Racing vehicles must not be registered and must never be used on the street. It is illegal to install this product on a registered vehicle and use it on the street.

Driving Mode Specs There are 4 major modes and 36 configurations in the Pedal Commander tuning kit. You can alter the behavior of your car as you want using these modes without the downside of the tuning chips! ECO mode: Nothing can hold you back! The ECO mode of Pedal Commander will make your RAM 3500 drive through harsh conditions in a simple and safe manner.

Even during the most challenging seasons like fall and winter, the weather won’t be able to hold you back from having fun! City mode: Your RAM 3500’s accelerator will feel the way it should. Appropriate for navigating city traffic to increase the throttle response sensitivity.

A must-have companion for deciding when to accelerate! Sport Mode: Increases the throttle response of your RAM 3500 for snappy acceleration. Challenge the roads with your RAM 3500 to show off with courage and stand out and make others feel like lawn mowers compared to you! Take cautions in your RAM 3500 for it.

As soon as you touch the accelerator, your car will accelerate. Sport+ is for track use only. Bluetooth Pedal Commander has Bluetooth capabilities. You can download the Pedal Commander app from the Google Play Store or the Apple Store, pair it with your Pedal Commander and control the unit in a more unique and user-friendly way.

To quickly retrieve your setups, utilize the mobile app that is Bluetooth-connected to your car—using the latest technology Bluetooth connection to treat your RAM 3500 right. Pedal Commander makes that more effortless now.

Utilize its user-friendly smartphone app to control it! Prepare your optimized settings and choose from 36 configuration options to access your RAM 3500 full potential. Lock your preferences to restrict anyone from children to valets from meddling with your settings.

Simply download the Pedal Commander app and find the “Connections” sub-menu from the settings. Click “Add a New Pedal Commander”. To complete the pairing process, please enter the code located at the back of your Pedal Commander.

Then please enter a name for your Pedal Commander device. After this pairing process, you can control the Pedal Commander on your smartphone. Plug It In All By Yourself With Pedal Commander, installation only takes 15 minutes! While tuning kits and mods take longer, Pedal Commander is a device manufactured for your RAM 3500 to make installation safer and quicker.

Pedal Commander provides customized, unique sockets to make things easier. You won’t need professional help or other mods to install or operate it. Observe how your car behaves, evolving! See if you ever want to drive your vehicle without Pedal Commander again after you experience the difference! It is a plug-and-play installation that attaches to your accelerator pedal.

You can use the search bar to look up installation videos and instructions by entering the PC number. Make sure to include “PC” and the appropriate unit number. Sub-Model Pedal Commander is the method to boost the performance of your RAM 3500, whether you need instant access to all the power your RAM 3500 engine can offer or want a smoother throttle response.

As extra, if you were looking for improved fuel economy, you have found it. In its ECO mode, unlike other fuel-consuming mods, Pedal Commander will add your RAM 3500’s fuel efficiency a 20 percent boost thanks to its cutting-edge technology.

With the help of Pedal Commander, unlock what is already unlocked in your RAM 3500, achieve the top point of control, maximize your potential, and attempt what you haven’t yet. Do not let bottlenecks grind your gears.

Also, Pedal Commander works perfectly with RAM 3500’s submodels like Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, SLT, ST, Tradesman, Base.

The Pedal Commander is the world’s most advanced throttle response controller. This gives drivers full control over their vehicle’s performance by offering 36 different settings to choose from. With the Pedal Commander, drivers now have the power to eliminate the annoying lag and sluggish feel that their vehicle may have or add additional lag to save on fuel economy thanks to Pedal Commander’s advanced Eco mode.

The Snark Super Snark rechargeable tuner will help you keep your instrument in tune with convenience and reliability. Battery-free and compatible with any USB charger, its a hassle-free solution thats also highly responsive, powered by Snarks proprietary tuning software.

Additional features include a clip-on backing and rotatable display with a high-resolution LCD screen.

What’s the fun in owning a truck if you don’t make it your very own, right? Many drivers who upgrade their wheels and tires do not know they can correct their speedometer and vehicle computer for different sized tires.

Superchips Flashcal F5 calibration tool allows you to make these corrections. It is exactly what you need to ensure that your truck or SUV is running at peak performance after it’s lifted, sitting on bigger tires, and turning a beefed up axle.

Flashcal F5 offers a ton of optimization, so no matter how you customize your truck or SUV, you’ll be able to dive into the settings and optimize your driving experience.

The Trinity 2 Platinum Programmer is an advanced custom tunable performance programmer. Featuring full re-flash and reprogram capabilities, advanced data acquisition, and customizable gauges, the Trinity 2 Platinum allows users to tune their vehicle to add additional horsepower, torque, improve throttle response and overall drivability.

Monitor lots of different parameters with the full color, HD 5″ touch screen. The layout of the gauges on the screen and be user customized so you can see the information most important to you. Save multiple different gauge configurations and switch between them depending on the different types of driving you’ll do.

Diablosport tuning will provide an increase and horsepower and torque to increase drivability. Save money by switching to the economy tune for the best mpg and efficiency. Towing tunes will be including to make it easier when hauling equipment, giving you a little extra power on the highway while keeping your engine running cool and efficient.

SCT Performance 7015 – X4 Power Flash ProgrammerSCT Performance 3200 – X3 Custom Tuning Device will unleash your vehicle’s true performance potential, by increasing both its horsepower and torque! The programmers feature next generation technology in their large color screen backlit LED display, and dual analog inputs.

They can store up to 10 custom tunes, have high speed data logging and monitoring capabilities, can read and clear DTC trouble codes, and will back up your factory tunes for a simple restoration! The programmers have WiFi capability and come packaged with free data logging software.

Note: Automotive Stuff is an authorized dealer of all SCT Performance products, so your new product will include the full factory warranty. SCT Performance LLC was founded in 2003, and has since then become recognized as an industry leader in providing innovative, high quality handheld automotive performance and fuel economy programmers and custom tuning software.

All SCT products haved undergone rigurous software and OE automotive powertrain calibrations to ensure their superior performance and tuning ability! Customers have come to recognize and trust SCT products for their quality and reliability, as each product is tested on both the dyno and on the street.

Flashcal F5 Programmer; Handheld Tuner; Corrects Speedometer For Tire Upgrades Between 25-40 If you are a 2019 Ram 5. 7L New Body truck owner who is looking for a device to help calibrate for your large aftermarket tires, read/clear trouble codes and more, then look no further.

The Flashcal for Truck is a product designed to give features and calibration tools to truck owners at a great price. The days of clunky, outdated calibration tools are over. Flashcal has trucks covered and the market cornered with quality and pricing that can’t be matched.

Please visit us to verify fitment on your vehicle. Trinity T2 EX. The allnew Trinity (T2) is the most advanced performance programmer and monitoring setup of its kind. Featuring a high resolution 5 capacitive touch screen full swipe functionality industry leading gauge designs jaw dropping power potential and powerful yet simple user interface.

The T2 is unlike anything else on the market. The T2 is available in the EX or MX versions. The Trinity T2 EX is offered in two versions a 50state compliant product with tunes created by DiabloSport or a CMRcustom tuning version which is capable of using tunes created by 3rd party tuners to meet your custom needs.

The Trinity T2 MX is available as a monitoring only device capable of working on any vehicle 1996 or newer that is equipped with an OBD2 port. Now the Trinity product line has something for every type of driver from mild to wild.

MPVI2, the latest generation of hardware from HP Tuners. Equipped with enhanced features like Bluetooth, our Proprietary Expansion Port, and Mobile Device Support, the powerful MPVI2 makes it faster and easier to read, edit, and write your vehicle’s software.

Not to mention full support for our latest rendition of Track Addict, whether you frequent the drag strip, circuit, autocross or off-road the MPVI2 has the fastest scanning, logging and data transmission rates to ensure you capture everything.

DiabloSport inTune i3 Platinum Programmer Custom Tunning For 17-19 General Motor If you are a horsepower junky and you need a fix, look no further. Whether you have a Chrysler, Ford, or GM vehicle in your driveway, DiabloSport’s inTune i3 Performance Programmer is an easy way to boost power without even popping the hood! You get a performance upgrade that makes your throttle more responsive, optimizes drivability, and even adds some bottom-end horsepower! The inTune i3 programmer is pre-loaded with dyno-tested performance programs designed specifically for your car or truck.

Within minutes, you could add horsepower and torque with no other tools required! WARNING: This product is not street legal and may only be used on Racing Vehicles. Racing Vehicles must be used exclusively for racing or other forms of competition.

Racing vehicles must not be registered and must never be used on the street. It is illegal to install this product on a registered vehicle and use it on the street.

Designed as an upgrade for the Power Commander V, the Autotune Kit allows you to skip all the in depth numbers associated with tuning and skip right to the performance you’re after. Monitors air/fuel ratio Relays information to the Power Commander V to auto-correct, while you ride Multiple maps to choose from allowing you to dial in the perfect target values Includes module, O2 sensor and harness Plug-and-play design for quick and easy install.

The all-new Flashpaq F5 is the industry leading handheld tuner. With this easy to use handheld tool, you can add horsepower in minutes without turning a wrench! The user interfhas been redesigned with simplicity and functionality in mind.

The Flashpaq F5 is packed full of tuning experience with over 30 years of tuning history. 5″ H.

Wrap Your Hand Around Some Serious Power! Introducing the latest in pre-loaded, pre-programmed power from the most trusted name in engineered engine efficiency. Banks is the only record-holding engine builder in the programming game, and now that expertise can be yours! The Banks AutoMind programmer comes ready to run with pre-loaded power right out of the box and right for the job at hand! Its calibrations were developed with power and increased MPG in mind.

The AutoMind can also display a host of critical engine functions and provides service technician diagnostic capabilities with its ability to scan and clear vehicle trouble codes. Intense, usable, real horsepower only from Banks! IMPORTANT NOTE: This product not intended for use on vehicles that originated as cab-and-chassis vehicles or that were built for use in Mexico.

Use of the Banks AutoMind will result in improper running and a partially disabled vehicle.

New Generation 2 Update! Stops the competition dead in their tracks. Results in our torque and power gains across the full operating rpm range, starting right off idle and marching to the shift point in each gear.

Derringer is dyno calibrated to use multiple data inputs such as throttle position, rpm, vehicle speed, AFR, Knock and coolant temperature, just like your engine’s ECU. Its microprocessor based electronics are able to actively and safely optimize calibrations in real time.

No competitive product does that. Derringer has three switched settings: Stock, Plus and Sport. Sport produces Best in Class performance knocks you back in your seat. The Plus setting is for work use and has great mid-range feel.

When running Plus with a loaded work truck and/or pulling a trailer, your on ramp merging speeds and passing times are greatly improved. The electronics are molded into a waterproof connector, which is easily concealed and communicates using B-Bus (Banks Bus) with other devices such as our iDash 1.

8 Super Gauge/Control Center. The Derringer connects in line with the Throttle Inlet Pressure (TIP) and Manifold Absolute Pressure (MAP) sensors. But, unlike others it also connects to the vehicle’s OBDII diagnostic bus connector.

A CAN (controller area network) transceiver chip communicates with OBD or B-Bus allowing our microprocessors to talk with the vehicle. And, Derringer’s special coolant temp watchdog prevents power addition when the engine is too cold or overheated.

The Derringer also auto-adjusts power if knock occurs due to bad fuel. Maximum safe power is all automatic with a Derringer, you just choose your setting.

The rear cylinders on the 6. 7L Cummins suffer from a lack of coolant flow and because of this experience the highest coolant temperatures. This can cause excessive pressure to build in the cooling system, especially the rear of the block.

This can blow out freeze plugs externally, or the smaller diameter plugs under the valve cover, leading to a failure. Fleeces coolant bypass kit adds a secondary thermostat that works based on temperature instead of excessive pressure.

This solves the problem before pressure becomes an issue by ensuring consistent temperatures across all six cylinders. Key Features Lowers coolant temperature at the rear cylinders Ensures consistent temperatures across all cylinders Prevents damaging coolant pressure build up Complete kit comes with Stainless Steel braided hose and AN O-ring fittings to ensure a leak-free installation For 2007.

5 2018 model year Dodge Ram 6. 7L Cummins trucks, including both automatic and manual transmissions, factory installed transmission fluid heat exchangers are uncommon.

The Flashpaq Pro Plus pairs the ability to load custom tunes with Superchip’s pre-loaded tunes, all on a single device. Comes with pre-loaded tunes and the option to store 4 custom tunes of your choice.

HP Tuners’ network of dealers can send and load custom tunes directly to the Flashpaq Pro Plus. Maybe you’re not ready for custom tuning just yet, but you like to have the option down the road. Now you have a product that hits the mark.

Superchips has paired popular calibrations with endless options for consumers with cars and trucks they are looking to continuously tune and tweak.

Banks Power 66793 Programmers and Chips Derringer Tuner Results in torque and power gains across the full operating rpm range, starting right off idle and marching to the shift point in each gear. Derringer is dyno calibrated to use multiple data inputs such as throttle position, rpm, vehicle speed, AFR, knock, coolant temperature, and EGT, just like your engines ECM.

It actively and safely optimizes calibrations in real-time thanks to its OBD-II connectivity. No competitive tuner does that. Derringer has 6 levels, adjustable on-the-fly using the iDash. Level 6 produces best-in-class performance.

Level 3 is designed for work use and has a great mid-range feel. When running Level 3 with a loaded truck and/or pulling a trailer, your on-ramp merging speeds and passing times are greatly improved.

The electronics are enclosed in a compact housing which is easily concealed and communicates with other Banks devices such as our iDash DataMonster, iDash SuperGauge, and PedalMonster throttle booster.

The Derringer connects in line with your trucks engine sensors. But unlike other tuners, it also connects to the vehicles OBD-II diagnostic bus. ActiveSafety health monitoring circuitry keeps an eye on the vehicle and the module itself.

It checks its health 100 times a second. If it detects an issue, the Derringer instantly bypasses itself, sets a device diagnostic code, and seamlessly returns the truck to stock power. Plus, Derringers special coolant temp monitoring prevents power addition when the engine is too cold or overheated.

The Derringer also auto-adjusts power if knock occurs due to bad fuel. Maximum safe power is all automatic with a Derringer – you just choose your preferred power level and enjoy the ride.