20 Best Wood Lathe Chuck For Bowl Turning (2023 Updated)

Better design, enhanced controls and an all new concept, Jet’s 1221Vs Wood Lathe brings something completely new to the table. Unrivaled speed control offers users the most precise speed management possible to adjust to the task at hand, with variable-speeds ranging from 60 RPM up to 3600 Rpm.

Switching between forward and reverse functions is fast and efficient, since the 1221Vs is optimally designed for speed control in both functions. Provides maximum user control with variable-speeds up to 3,600 RPM in both forward and reverse functions.

Optimal design ideal for various speed ranges to adjust to different lathing tasks. Digital readout allows operator to dial in the desired speed for best results. Innovative ratchet style quick change belt system offers easy maintenance when needed.

Industrial style pre-loaded bearing 24 position indexing headstock with spring loaded spindle lock. Acme threaded tailstock features 2-1/4 in. of ram travel and high quality live center. Includes: Jwl-1221Vs 12-1/2 in.

x 20-1/2 in. Woodworking Lathe – 719200.

It was designed to expand the range and capacity of your standard NOVA Chuck for specific projects and applications. It universally fits to any NOVA Chuck for maximum flexibility and for money savings as duplicate accessories are not needed for different NOVA Chucks.

The 70mm Jaw Set is perfect for bowls and similar projects. These jaws were designed for expanded dovetail and reverse dovetail holds for gripping footed bowls. A special feature of the NOVA wood turning dovetail profile is that it is designed, specifically, for maximum strength and holding the wood turning without crushing the wood fibers.

These jaws will hold in both the contraction and the expansion modes. The jaws are precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability, and long life.

The set includes four jaws and instructions. They use the standard fasteners that come with your NOVA Chuck, but spare screws are available (WC# 417753, sold separately). Note: Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.

Sorby tools have been the pro’s choice for 100 years! The incredible special Sorby HSS steel holds a hair-splitting edge when others have dulled to uselessness. All tools are seated in ash handles with brass ferrules.

This intermediate HSS turning set is designed for both spindle and bowl work. The set includes 3/8″ bowl gouge, 1/2″ round nose, 3/8″ spindle gouge, 1/8″ parting tool, 3/4″ roughing gouge and 3/4″ rectangular skew.

These HSS tools will keep a sharpened edge about six times longer than carbon steel and resist “blued” softening from overheating during grinding or from heavy turning. Ash handles offer firm hand control during use and brass ferrules prevent wood splitting from tool pressure.

Overall lengths 17″ to 21″.

NOVA JS100N 100 mm (4 In. ) chuck accessory jaw set is an accessory for NOVA chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. Universally fits to any NOVA chuck* for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA chucks.

The NOVA JS100N 100 mm (4 In. ) chuck accessory jaw set is one of our most popular chuck accessories to mount 12 to 14 In. bowls. They are designed particularly for the expanded dovetail, reverse dovetail for gripping footed bowls.

Can mount customized false wooden jaws, so that customized jaws can be made for special purposes. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fires.

These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions.

Uses the standard fasteners that come with your NOVA chuck. Designed by the innovators of the 4 jaw chuck for wood turning, Teknatool International – since 1955.

Designed for smaller lathes, this chuck from Oneway Manufacturing is loaded with features. Only 3-1/2″ in diameter and weighing 3. 4 lbs. , it features one-handed single key tightening, it’s self-centering, and its patented profile jaws provide maximum holding power.

Both the scroll and base jaws are hardened for long life and smooth operation while the body is nickel plated to resist rust and wear.

Includes all three of our carbide turning tools Packaged in an attractive black case Our Mini Carbide Turning Tools feature a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening.

Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutting edges stay sharper, longer when compared to steel. The handles are turned from fine, solid ash, and are ergonomic with molded rubber that enhances your grip and reduces fatigue.

The tools are available in three cutting profiles: round, square and diamond-shaped. Total overall length of Mini Turning Tools is approximately 13-1/2. Ash handles are 9-1/2 long from the butt of the handle to the top of the stainless steel ferrule.

Length of the shaft is approximately 4. Carbide cutters are not interchangeable between the different tools. Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles.

Overall length of the diamond cutter is 1-1/8. Angle of diamond cutter is approximately 35 degrees. Square Carbide Mini Turning Tool is ideal for flat or convex areas on spindles and pen turnings. Square cutter is 3/8 square.

Round Carbide Mini Turning Tool is ideal for producing a smooth finish on curved, concave surfaces and for general turning applications. Diameter of the circular cutter is just under 1/2.

The Nova 23055 SuperNOVA2 Wood Turning Insert Type Chuck is a four jaw self-centering geared chuck suitable for a wide variety of lathes with a swing up to 20 in. It features the powerful patented Tuff Lock gearing with precise, hardened action delivering incredible smooth strength for a sold, vibration-free performance.

With this SuperNOVA2 chuck, you’ll find yourself turning longer, more delicate stems as well as larger, uneven, and rough work that you couldn’t before with greater security. The chuck also offers other unique Nova elements like a composite indexing back, auto stop, copper composite jaw slides, woodworm screw, a comfortable T-bar handle, and 2 in.

jaws. Composite indexing backing plate reinforced with stranded glass fibers provides extra strength. High powered Tuff Lock gearing delivers outstanding grip with little effort. Fast comfortable T-bar handle has a fast, positive location, and is easy to use.

Special wood turning profile jaws cuts into and grip wood fibers firmly. Fits full range of Nova chuck accessories. Includes: SuperNOVA2 Wood Turning Insert Type Chuck – 23055, 2 in. Jaws, T-Bar Handle, Woodworm Screw.

NOVA 48202 G3 Wood Turning Chuck Insert Type is a 4 Jaw self centering geared chuck, suitable for smaller wood lathes with up to 14 in. swing. With unique NOVA features such as Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2 in.

Jaws as standard, this chuck is fully featured. Powerful Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance. Takes the same accessory range as other NOVA Chucks.

Insert Type Chuck, requires additional insert adaptor to fit to wood lathe. Awarded Best Value in Chuck Test by Wood Magazine Sept 2011. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International – since 1955.

High powered tuff lock gearing delivers outstanding grip for little effort Fast comfortable T bar handle Open back for easy cleaning Fits full range of NOVA chuck accessories Special wood turning profile on jaws to cut into and grip wood fibers firmly.

The NOVA G3 comet II reversible chuck is designed exclusively for use with the NOVA comet II midi lathe. It’s light weight, and with less overhang which is perfect for smaller lathe spindles. The small 1.

79 In. body length delivers less overhang from the spindle than the larger geared chucks – the supernova2 chuck and the NOVA titan chuck, reducing stress on the smaller lathe spindle. This version of the G3 chuck comes with a anti-release spindle lock that ensures the chuck will stay securely mounted on the comet II midi lathe during the forward and reverse functions.

Greater solidity and precision than the previous model. The Power-Change Plus system offers greater solidity and precision than the previous model. The reinforced shank provides better tolerances, offering reduced play and greater accuracy.

Allows for better guidance thanks to the centering tip. The unique self-locking system requires a single click to disconnect the hole saw, allowing for quick and easy material removal.

This kit includes eight spare screws used to secure accessory jaws to your Nova chucks. Used to secure accessory jaws to your Nova chucks. Comes standard with all Nova chucks. Fits all Nova chucks. Includes (8) M6 screws.

This 5-pc. selected HSS Tool Set is for both spindle turning and bowl turning and includes a 3/4 inch Roughing Gouge, 3/8 inch Spindle Gouge, 1/2 inch Standard Skew, 1/8 inch Standard Parting Tool, and 1/2 inch Round Scraper.

Medium size handles are 9 inch. Age Group: adult.

The ITNS Chuck Insert/Adaptor 1″ 8 RH & LH Dual Thread by NOVA fits all NOVA Insert Type Chucks for maximum flexibility and adaptability. IT quickly and inexpensively adapt your NOVA chuck to almost any lathe depending on insert thread size.

Teknatool uses an easy and inexpensive insert/adapter system on all insert-style Nova chucks. The inserts are available with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s).

Just check the manual of your lathe to find the threading of your headstock spindle and purchase the corresponding adapter. Once the insert is in place, threading the chuck onto your lathe is a simple matter.

The insert system also guarantees that you’ll still be able to use your Nova chucks, even if you upgrade or change lathes later. If an insert/adapter is not available to match your lathe, you can have one threaded from a Blank Insert/Adapter (#46298, sold separately).

Also see our Chuck Spanner (#49013, sold separately), which is useful for tightening the inserts in place. Features: Adapts any Nova chuck to almost any lathe spindle at low cost. All insert-style Nova chucks (apart from the obsolete Compac chuck) use the same insert/adapter system to ensure maximum adaptability and flexibility for the user.

Large range of inserts to fit many different popular lathe models (see below). Inserts are threaded both inside and out. Outside thread is made to fit into the Nova Chucks. The inside thread comes in a variety of sizes; the one you need will depend on what lathe you have.

Note: Directly threaded chucks cannot be adapted to insert-style chucks. | Nova Insert/Adapter, 7/8″ 14-TPI RH available at Rockler.

The IYNS 1-1/4 inch 8 TPI UNS RH Nova Chuck Insert Y by Nova adapts your Nova chuck to lathes don’t have reverse turning ability and has precision machined from 1045 High Tensile Steel.

NOVA JS25N 25 mm mini chuck accessory jaw set are an accessory for NOVA chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. Universally fits to any NOVA chuck* for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA chucks.

The NOVA JS25N 25 mm accessory chuck jaw set is for small bowls and unsupported small spigot turning. Ideal for midi/mini lathe work. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fires.

These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions.

Uses the standard fasteners that come with your NOVA chuck. Designed by the innovators of the 4 jaw chuck for wood turning, Teknatool International – since 1955.

NOVA 6019 35mm 1. 37 Bowl Chuck Accesory Jaw Set are an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexiblity, saving money as duplicate accessories are not needed for different NOVA Chucks.

The NOVA 6019 35mm 1. 37 Bowl Chuck Accesory Jaw Set Jaw is perfect for smaller bowl work. With a special NOVA Wood Turning Dovetail Profile, designed specifically for maximum strength and holding in Wood Turning, without crushing the wood fibres.

These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 HIgh Tensile Steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions.

Uses the standard fasteners that come with your NOVA Chuck. Designed by the innovators of the 4 Jaw Chuck for Woodturning, Teknatool International since 1955. Some accessories s.

The Nova Galaxi 1624-44 55214 lathe is one of the latest members of the NOVA family. This lathe combines the best features of larger lathes in respect to power, capacity and state of the art technology.

These features will help ensure that your turning experience is more efficient, fun and safe. The Galaxi is the most versatile lathe on the market. The 1. 75 HP DVR motor offers features such as chisel dig sensing, favorite speed settings and out of balance sensors will help you with your creations.

This motor has incredible torque while providing super smooth operation. With the ability to dial in your speed from 100rpm to 5000rpm, this lathe is the perfect solution for all projects from the smallest pen up to a 29 bowl or platter.

The NOVA Galaxi DVR offers a 16u201D swing that is expandable to 29u201D with the option outrigger accessory. When turning spindles, youu2019re going to love the 44u201D span between centers. The head stock can slide across the length of the.

The Nova 48266 G3 Bowl Turning Bundle provides excellent value and is presented in a sturdy storage/carry case. The bundle includes the Nova 48232 Direct Thread G3 Chuck with 50mm Jaws, Nova Jscole 10 in.

Cole Jaws, Nova 6030 Cole Jaw Buffer Kit, chuck handle, woodworm screw, fastenings and manual. The package gives you 26% savings over buying the items individually, and gives you everything you need to start your bowl turning adventure.

The Nova G3 Chuck is precisely machined from 1045 machine grade steel, and comes with anti-release spindle lock. This chuck is a dedicated threaded 1 in. 8Tpi Rh/lh version, exclusively for use on the Nova Comet II Mini Lathe (and other lathes with a 1 in.

x 8 TPI spindle) this ensures the chuck will stay securely mounted on the lathe, throughout forward and reverse turning applications. The Nova G3 chuck features a one handed, geared operation, for fast opening and closing, ideal for production turning of smaller pieces.

The gears are strong and smooth. The Nova G3 Chuck comes with advanced features such as automatic jaw safety stop so jaws won’t extend past the chuck, copper infused jaw slides which provide lubrication and resistance to wear.

The small chuck size and weight minimizes loads on small spindles and bearings. The Nova G3 chuck takes all 26+ Nova accessory Jaws in the range (exception of Infinity and Titan Iii) to extend your capacity to tackle a wide range of projects.

The Nova Jscole Cole Chuck Accessory Jaw Set is an accessory for Nova Chucks, designed to expand your range and capacity of your standard Nova Chuck for specific projects and applications. Universally fits to any Nova Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different Nova Chucks.

Nova Jscole Cole Chuck Accessory Jaw Set is a versatile set, designed for the re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned.

Other Nova Accessory jaw sets can be added to the Cole Jaws making a combination jaw facility – expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters.

These jaws have many advantages over traditional vacuum chucking. Suitable for lathes with a minimum 12 in. swing diameter. Die cast aluminum with pre-set holes, for precise closing, durability and long life.

Comes with 4 jaw segments, special fasteners, standard rubber bumpers and instructions. The Nova 6030 Cole Jaw Buffer Accessory is an accessory for the Nova Jscole 10 in. Cole Jaws, This kit contains 8 Multisided buffers and 8 long pin buffers, to enable you to hold a variety of projects in your Nova Cole Jaws.

The Nova 48264 Chuck Accessory Storage case allows you to protect your Nova Chuck investment with storage of one chuck, and several jaws, wrench, and woodworm screw all in a one heavy duty plastic case.

They are great for not only protecting your chuck but for carrying to events or clubs, and cases are stackable allowing efficient use of workshop space. The bundle includes the Nova 48232 Direct Thread G3 Chuck with 50mm Jaws, Nova Jscole 10 in.

Cole Jaws, Nova 6030 Cole Jaw Buffer Kit, chuck handle, woodworm screw, fastenings and manual. Other Nova jaw sets can be fitted to the Cole Jaws making a combination jaw facility. The multi-sided buffer has a unique reinforced steel insert giving solid mounting.

Quality materials used throughout for long life in tough woodworking conditions. Sturdy Carrying Case to protect your investment. Great Gift for Bowl Turners. Includes: (1) G3 Direct Thread 1 in. x 8 TPI Chuck with 50mm Jaws – 48232, Jscole 10 in.

Cole Jaws, Cole Jaw Buffer Kit – 6030, (1) Chuck Handle, (1) Wrench, (1) Woodworm Screw, Fasteners, Manual, Carrying Case.