20 Best Wood For Building Furniture (2023 Updated)

Live Edge Plank that is Ideal for Wood burning and Chip Carving Use for Home Accents, Rustic Weddings, Making a Base or Many Arts & Craft Projects Sold by Width Increments and will Vary from 9″ to 13″ Wide Approximate Size 16-Inches Long by 12 to 14-Inches Wide by 1-5/8-Inches Thick Made in Wisconsin, USA Included Components: 1 Basswood Plank.

Designed to cover work tables, the Gladiator Hardwood Top is a perfect resource for wherever and whenever creativity strikes. The 28 in. top provides a smooth and durable work surface for a variety of home improvement, craft or hobby projects.

With a solid, 300 lbs. weight capacity, this top pairs easily with a Gladiator Ready-to-Assemble Modular GearBox or GearDrawer for a completely customized workstation.

A popular wood for all types of woodworking projects; however, it is not intended for model aircraft use. The thin plywood sheets take paint and varnish well and produce an outstanding finished piece.

It is a less expensive grade of birch plywood. Requires a saw for cutting. Features“MIDWEST” PLYWOODSize: cm x 30cm x 30cm Used for crafts, hobbies, architects, modelling, furniture building and repair, etc.

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red.

The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8″, 1/4″, 1/2″ and 3/4″ thicknesses, relieving your planer of excess work.

Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.

Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years.

Full height is attained in about 100 years. Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.

Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance. Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.

Luster: Rich and satiny. Odor: Emits a fruity aroma when cut. Steam Bending: Good. Often compared to Beech and Ash.

With its gorgeous chocolate tone and easy workability, it’s easy to see why Black Walnut is often regarded as the classic American cabinet wood. The heartwood varies from light grayish-brown to deep chocolate brown, occasionally approaching an almost black or purplish-brown.

The grain is slightly open and usually straight, but is famous for its sometimes stunning figure. All boards are machined S4S to 1/8″, 1/4″, 1/2″ and 3/4″ thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations.

Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! Tree: May attain a height of 70 to 90 feet, with a 24 to 48 inch diameter trunk.

Texture: Usually coarse, but uniform. Luster: Somewhat dull, but develops a lustrous patina after many years in use. Odor: Emits a mild, sweet odor reminiscent of cocoa. Movement: Dimensionally stable after seasoning.

Absorbs and releases moisture more slowly than most woods. Natural Durability: Resistance to insects and fungi is very good. Working characteristics: Works extremely well with hand tools. Steam Bending: Steam bends well.

(Roughly 78% of steam bended pieces survive without cracking). Strength: The wood is strong and is able to withstand extra weight with little deflection or bending.

The classic American blonde, Hard Maple features creamy white sapwood with a reddish cast, and rugged durability. The wood has an exceptionally fine, even texture, and tight pores that yield an excellent finished surface.

These thin boards are machined S4S to 1/8″ and 1/4″ thicknesses, eliminating wear and tear on your planer. You won’t have to worry about chipout, which is difficult to prevent when planing thin stock.

Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up! Tree: May reach a height of 70 to 120 feet, with a 24 to 36 inch diameter trunk.

Sapwood Color: White with a reddish cast. Heartwood Color: Uniformly pale reddish brown or light tan. Grain: Usually fairly straight, but can also be curly or wavy. Sometimes exhibits decorative figuring like bird’s eye, maple burl, blister, leaf, and fiddleback.

Texture: Very fine and even. Working properties: Due to hardness, tools must be kept very sharp. Carving: Responds well to carving tools. Steam bending properties: Fair. Strength Properties: Very high bending strength.

Resistance to compression parallel to the grain is high. Hardness is rated as medium. It is heavy, and resists denting and marring. Hard Maple can be up to 25 percent harder than Soft Maple.

A long time favorite for its rich color and excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red.

The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with hand tools and takes an excellent finish and polish. All boards are machined S4S, and are planed to 1/8″, 1/4″, 1/2″ and 3/4″ thicknesses, relieving your planer of excess work.

Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations, while the thicker boards are ideal for furniture, paneling, cabinet doors, mouldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! Distribution: As many as five varieties of Black cherry are reported to thrive throughout North America.

Tree: Attains heights of about 100 feet (30 m) Average tree grows to about 80 feet (24 m) in height, and produces a tall trunk, about 24 inches (60 cm) in diameter. Cherry trees are usually large enough to harvest after 35 to 40 years.

Full height is attained in about 100 years. Light & Air-Induced Changes: Black cherry is very sensitive to UV light, which causes it to darken over time. UV light inhibitors in coatings can be used to prevent color change.

Grain: Fine grain. Material with dark wavy streaks are frequent. Quartersawn lumber has a shimmery appearance. Texture: Fine and uniform. The wood often has narrow brown pith flecks and small gum pockets.

Luster: Rich and satiny. Odor: Emits a fruity aroma when cut. Steam Bending: Good. Often compared to Beech and Ash.

Bocote (Cordia spp. ) has a yellowish brown body with dramatic dark brown to almost black stripes. Color tends to darken with age. The grain patterning can be quite striking, particularly on flatsawn areas.

It’s not uncommon to see many “eyes” and other figuring in bocote; though unlike knots, they do not seem to present any special challenges in machining. Some species may contain silica that will dull cutters.

On the whole, bocote is easily worked and machined with good results. Although bocote has a fairly high amount of natural oils present, gluing is usually problem-free. Bocote also turns and finishes well.

Common uses include fine furniture, cabinetry, flooring, veneer, boat-building, musical instruments, gunstocks, turned objects, and other small specialty wood items. Most species come from Mexico and Central/South America, though certain species occur in Africa.

This micro-thin stock is cut to size from quality, kiln-dried stock. 100 percent clear and sanded on both sides. Dimensions are +/- 1/8 inch. Grain runs with the longest dimension.

With its gorgeous chocolate tone and easy workability, its easy to see why Black Walnut is often regarded as the classic American cabinet wood. The heartwood varies from light grayish-brown to deep chocolate brown, occasionally approaching an almost black or purplish-brown.

The grain is slightly open and usually straight, but is famous for its sometimes stunning figure. All boards are machined S4S to 1/8″, 1/4″, 1/2″ and 3/4″ thicknesses. Thin boards are well-suited for edging, veneering, marquetry, sides for decorative boxes, bending stock and bent laminations.

Thicker boards are ideal for furniture, paneling, cabinet doors, moldings, drawer sides, fine jewelry boxes and whatever else your imagination can dream up! Tree: May attain a height of 70 to 90 feet, with a 24 to 48 inch diameter trunk.

Texture: Usually coarse, but uniform. Luster: Somewhat dull, but develops a lustrous patina after many years in use. Odor: Emits a mild, sweet odor reminiscent of cocoa. Movement: Dimensionally stable after seasoning.

Absorbs and releases moisture more slowly than most woods. Natural Durability: Resistance to insects and fungi is very good. Working characteristics: Works extremely well with hand tools. Steam Bending: Steam bends well.

(Roughly 78% of steam bended pieces survive without cracking). Strength: The wood is strong and is able to withstand extra weight with little deflection or bending. ,Hardware > Tools,Rockler.

This domestic wood, selectively cut in Northern Michigan and Wisconsin, is desired because of its economy, workability, and finishing qualities. Its close, tight, homogenous grain structure makes it ideal for a wide variety of hobbies, crafts, and miniatures.

Thin basswood may be cut with a hobby knife; thicker basswood requires a saw for cutting. Basswood may be stained or painted to represent any wood type. Also available in sheets.

Square solid hardwood legs measures 1-3/4 W x 1-3/4 D x 20 H inches. Coated with Tuff-Gloss UV finish. Rounded corners and edges for added safety. Table is reinforced with extra strong aprons for the strongest construction possible.

Assembly required.

Waddell 6408U 1/2″ X 48″ Hardwood Dowels Hardwood dowels are the most popular and economical choice Made from market select hardwoods, species may vary to maintain low prices 1/2″ x 48″. This Product is manufactured in China.

The Waddell Round Taper table leg is a stylish leg that is a great replacement for any table or stool. It is also the perfect choice for creating a new table or restoring a cherished family piece. It is constructed of furniture grade solid hardwood for the finest appearance and long lasting durability.

The table leg comes with a pre-installed 5/16-18 inch hanger bolt that provides fast and easy installation when using Waddell’s Quick Mount surface plates. The silver self-leveling foot offers maximum stability and floor protection.

It is sanded smooth and ready for your favorite finish.

Edge banding is all-natural wood veneer that has been pre-sanded, backed, and pre-glued. It is precoated with a heat-activated glue for a permanent bond. Just iron it on!

Starboard is a UV-Stabilized marine grade polymer, which makes an excellent choice for applications where there is exposure to sun and saltwater. It will not rot, delaminate, swell or splinter and the matte texture requires no painting, maintenance or finishing.

Starboard is easy to work with using common woodworking tools.

Live Edge Timber Co. offers a unique way to customize Live Edge Timber slabs and make furniture building something anyone can do! Now everyone can buy timber slabs and create beautiful custom furniture at a fraction of the price that you would pay in a high-end furniture store.

Our Timber-Link slabs can easily be joined together to create a custom product. You can proudly tell your family and friends that you made it yourself. Each slab is pre-drilled, so you can insert our pocket hole screws and make a seamless joint.

This edge piece features 1 natural edge and 1 square edge. Edge pieces can be joined to any center piece or even another edge piece depending on your project. Let your imagination run wild. Create everything from dining tables, headboards, end tables, console tables, shelves, wall murals, desks, islands, tv stands, and so much more.

Rustic Maple Center Pieces are used in conjunction with Live Edge Pieces to construct a custom width live edge slab. Use only the center pieces if you like a square edged slab. Harvested in Canada, each piece is surfaced on 3 sides (S3S) and has pocket holes drilled in one edge to make joining to other pieces quick and easy, using Kreg 2-1/2 inch HD pocket hole screws and glue (both sold separately).

Pieces can be stained and finished to fit your needs. Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.

Rustic lumber may include checks, cracks, splits, or knots.

1/2″ x 48″, Poplar Dowel, Close Tolerance & Straight, Stains & Paints Easily. This product is easy to use. This product is Highly durable. Manufactured in United States.

Strong bearing ability: load bearing of 1 leg is about 100kg. Solid and reliable, made of hard oak wood. Fit for sofa, TV cabinets, cabinets, tea table, bed feet, and so on. With 4 installation iron plate.

Note: Due to different production batch, the item size and color will be a little deviation.

Waddell’s wide selection of stock dowels makes us your best source. Waddell strives to offer a competitively priced hardwood dowel in the retail market. All dowels have been sanded smooth and are ready for your favorite finish.