20 Best Wood Filler For Pine (2023 Updated)

I tried out a small practice piece of wood before I use on our kitchen cabinets. They’re a dark stain, and I mixed a tiny bit with some of the DAP Premium Wood Filler with Color Blend Technology. I used a little deglosser on the wood.

I had mostly pretty shallow nail holes to fill, and a little bit of small cracks on one edge. After mixing a small amount of the filler with the stain, I applied it with a small plastic putty knife. Overfilled just a tad, let it dry for a couple of hours and then lightly sanded.

It looks good and blends in well with the original color of the cabinets. Plus, when we get ready to paint these cabinets they’ll be nice and smooth already. I’m not sure if the product will dry out in the tub, the lid seems ok, but we’ll see.

Elmer’s Pro-Bond is a standout. You won’t be disappointed with the results. It does everything they claim, and more! Unfortunately, it’s packaged in a container that’s far from air tight. If not used often you’ll find it semi hard.

If you find this condition, all is not lost. just add some water to bring it back to your desired consistency. that is if it isn’t rock hard! I overcame that problem by upon opening I transferred the contents to an air tight jar where it will stay fresh until you use it again.

which could be months, even years. great product! Jeff, Vermont.

Excellent product. It did what it was supposed to do even in less than ideal temperatures. Prior to purchasing this item, I read reviews from various sources about the filler and was therefore pleased that my local store carried it.

Thank you Aubuchon in Sandwich, Mass!.

Thought this would fix the issue of a south facing front door with a crack, and Ive tried several brands like DAP. After two days post application, and then paint, it proceeded to crack, again. At this point with $35.

00 invested I think the best solution is simple clear silicon paintable caulking=$6. 00 Ill let you know if it works.

Easy to use. Noticed some shrinkage in areas that my kids helped with. As long as you’re over 8, it shouldn’t have shrinking issues.

Like the spreadability water clean up no conflict with topcoat when touching up prefished materials reasonable dry time would love to see more colors available

Wow , this Gorilla wood filler is so super easy to use. All you have to do is squirt some where you need it. Very easy to spread. It’s permanent and Crack resistant. Perfect to hold screws into a hole that may be a little bit too big.

We used it to cover screw heads on a coffee table. It’s pretty smooth so didn’t need to sand paper it after before painting. This will be what wood filler I purchase in the future for all my projects.

Quality is great and super good value.

Had a frying pan handle that was accidentally damaged. This filler did the job and the color matched very well that is very hard to see where the handle had the original damage. It doesn’t dry instantly so it allows you to apply and mold it as needed.

Once it dries in a few hours it can be sanded to a nice finish. It worked great and once dried it is quite solid and feels very durable.

This tube comes very handy for small house project, kids class work and filling nails hole in wall. I recently used this to fill few of the nails patch in my old bedroom where i need to change painting position.

Fixed few old furniture and applied wood filler evenly on the surface on cracks to give new finished looks. Loved it.

I ordered 12 bottles of this product. The product worked great for shallow holes, but not for extra large fill holes. Two (2) bottles of DAP did not harden in extra large fill holes after 1 week indoors at 70 degree temperature.

Very disappointing, extra work digging out and time lost on project. However, the product does stain well and application was easy to apply and sanded well.

The DAP Plastic Wood Latex Wood Filler helps fix any issue you have with wood. for good! This product works very well! It is easy to spread and fills any crevice or nook in wood like a champ. The filler stays malleable and is not messy when working on your project.

The product dries very quickly and hardens completely in no time. I had no trouble sanding the product and even painting it. The Dap Wood Filler seems very durable and hopefully it will stand many uses and abuse.

It made my vintage picnic table look brand new again! I would buy this fantastic product again and again with no hesitation. Dap has made another high quality premium product that helps DIY’ers complete any project with confidence.

I was aware of this product and have used other competitor products. Never again. This Dap product surpasses any others I have tried in the past in terms of quality, ease of use, and performance. The DAP Plastic Wood Latex Wood Filler fills every need I have for my DIY projects and then some! I would recommend the DAP Plastic Wood Latex Wood Filler to a friend.

It is a premium quality product that gets the job done. and then some!.

I have found DAP Plastic Wood to be the best wood putty thus far. I prefer the mixture from the tube though. The consistency is better than that of the 16 oz. square tubs. The product in the square tub dries out way too quickly for my use.

I have used the tube to repair dings and nicks in our siding and to fill the gaps where the sheets of siding meet. I am also able to form/sculpt a ‘wood grain’ finish in areas of the siding that required extensive sanding which removed the wood grain effect.

My husband brought home a competing brand of wood filler in a tube, it cost more, performed poorly and was more like sawdust mixed with a bit of glue. It wouldn’t even stick to anything.

I do a lot of 3D printing with PLA filament mainly and before painting the terrain features, it is often necessary to get rid of ridge lines and such using the Elmer’s Wood Filler. I have some very large structures, and so it can take a while to cover them with the Wood Filler.

I purchase the small containers because once it starts to turn dry it will turn color. If you have a large container the catalyst is in the filler that is invariably going to dry, and if you don’t use all of that large container, then a lot of it is often wasted.

If you purchase a bunch of the smaller ones, then far less is lost, and usually you can pace your work for your models by using a jar at a time. This approach has worked well for me.

This is amazing. You just take a little bit and use a scraper to fill in an area where some veneer has come off older furniture. I let it dry overnight then went over it with a wood stain paint and you cannot tell I had repaired my antique buffet at all.

No horrid odors either and cleans up with soap and water if you make a mistake.

This is a good product. Its a small container. Bigger is better! So get the bigger one if you plan on doing a lot of filling. By a lot I mean I did three door hinge holes and about 6 cabinet small cabinet knob holes and isn’t much left.

I will go bigger and buy it again.

I do a lot of woodworking, so I was excited to get a chance to use this wood filler kit. I use a lot of pocket holes in my projects, so I’ve always got a need for more wood filler! It has everything you need to patch up holes in woodworking projects and make your creations more aesthetically pleasing.

The kit includes both the wood filler itself and a plastic applicator putty knife. The wood filler applies easily, dries quickly and does a great job filling in divots and screw holes. I was pleased that the filler was easy to work into awkward pocket holes.

The putty knife is handy for ensuring even application of the filler and to keep my hands from getting messy. From my testing, it holds stain well and blends nicely with the wood around it. This is a great kit!.

This wood filing kit is exactly what I needed to do a quick repair on our kitchen counter trim piece. The corner of the trim had gotten bumped pretty hard are cracked about 4 inches down the middle. This crack was very noticeable and was going to be expensive to replace.

I took the wood filler kit and was able to fill in the crack evenly and waited till it was ready to be painted. Once I painted over the wood filler with white paint to match the trim the crack was no longer even noticeable The repair time took 5 minutes to fix and I waited a day just to be safe before painting over it.

The overall results are great for such a simple and easy to use kit.

I could not find a date on tube of Elmer’s Pro Bond Wood Filler tube. I was disappointed because as I squeezed the tube the fill would not come out. I cut wider and at an angle and still no luck. When the tube side gave way, I used what I could to fill my small holes.

What a mess. I do not recommend this product. I asked my man to get me the stuff in a tin but he did not listen to me and got me Elmer’s ProBond instead.

Great for filling nail divets in pre primed trim. Water clean up. Need 2 applications for deeper holes, no paint touch up needed over filled holes. An Ace associate sold me a tub of brown wood filler and said to use a small brush w/white primer to cover the brown filler.

Seriously? He didn’t know this product existed. Google did.

Thanks to Elmer’s claim that their wood filler is stainable, my piece is RUINED!! It does NOT absorb the stain! Wherever you used Elmer’s wood filler, it will LOOK LIKE you used wood filler because it stands out VERY NOTICEABLY from the stained wood.

Thanks a lot, Elmer’s. I worked long and hard to get this piece just right. which is was, until your “stainable” wood filler was NOT stainable!.

gave the product only 3 stars because the product actually does what it should. However, it lost the 2 remaining stars because of packaging. They should have taped the top down on all sides to keep it from opening in transit.

Once it got here, it was a total mess. I was able to save half of what spilled.

Easy to apply. Dried quickly. Was able to sand smooth and paint. Filled in the areas great. I would use it again.

This is the 3rd or 4th time I’ve ordered these on line from North40. These slippers take a long time to wear through them and I’m retired and wear them a lot of the day. They are comfortable and so I go back for more.

North40 itself has been first class s.

I always make the mistake of purchasing this from my local store, if/when they don’t have another, better product available. and I always regret it! This stuff is rated for interior/exterior but is probably really intended for exterior use because it’s 1) greenish in color and 2) coarser than you’d want for an indoor project (i.

e. installing trim or building some item of furniture). My biggest beef with this wood filler is that it comes in a tub with way more than I need, yet, once you store it, it instantly dries out and becomes useless and a total waste! I’ve tried sealing the lid with duct tape, etc.

but the product still dries out, and this is frustrating because I’m 100% confident that the manufacturer could provide a good-sealing container IF they weren’t mostly interested in selling more and more tubs of this junk.

p. s. Did I mention that you can’t fit a standard putty knife into the top of this container. Ridiculous!.

Giving one less star because while it is stainable, I don’t recommend it for that aspect. Works as a wood filler just fine. I have a review on my YouTube channel, Crafty Rescue.

We used this in various places in our remodel. It is a great product. Goes on easy Sands easy and ready to paint very quickly.

I have used a lot of Timbermate over the years and I have found it one of the most versatile wood fillers around. To David from Melbourne, who gave it 1 star, you can add water to it when it dries out and it as good as the day you bought it.

I have added water to this product after not using it for 2 years and it worked perfectly. Another tip, if you want to fill large holes, do it in stages of thickness no deeper than 3mm and then add more, when each stage has dried.

It’s always a good idea to seal it , if putting it out in the weather. I am an average handyman but I find if you’re going to do anything unfamiliar, read instructions or do some research first.

I used Timermate for a grain filler on small vanity before trying it on my kitchen cabinets. I’m glad I did. The stuff worked great at filing the grain but the smell is terrible. I didn’t mind the smell so much when I opened the container b/c it smells kind of like a band-aid/medicinal.

After putting a coat of primer and 3 thin coats of pain on the cabinets they look great. but the odor is like a nursing home. and not a clean one. I have ordered a different grain filler to try one the kitchen cabinets.

I have about 3 8oz containers of Timbermate left over.

This is a very light colour. If your jarrah sees any sun, it’ll darken, and this filler will really stand out. I added some black paint in mine which made it a much better colour match. Also if you use it outside, it will dissolve in the rain.

Got the job done for the purpose project that I was on. Was a good match for the wood that I was refinishing. But it dries very quickly so if you work with the product you must work fast to make sure that you get it completed in time before the drawing.

It molds very easily it doesn’t take a lot of the product to complete what you need to do and feeling cracked so whatever your project might be. It does have an odor. So make sure that if you do work with a mask if the fumes annoy you.

Although the fumes may not be harmful it is rather a strong odor.

I was a painter for many years and when I needed to fill wood i would use Bondo which was god it was hard to work with as it hardened quicly and was hard to clean up. Famowood is a latex product and hardened great.

Easily sandable and easy cleanup. The gallon size is a great value and about a third of the price of other wood fills.

I used this product on my floors. I filled in all the cracks. It was easy and sanded well. then I stained my floor and it looks like an old fashion floor. I loved this product. The company was easy to work with and got the product out right away.

This is best stuff and I have used a number of different products for gap filling! It dries fast, it sands easily and it just all around amazing. I will criticise the size of the container because I wish it was bigger, but that’s besides the point.

For under $10 it is still more expensive than others products but I will always come back to this one now!.

I recieved this for free in exchange for my honest review through viewpoints/ PowerReviews! I love diy and he love in a home that was harshly lived in before we got here. I couldn’t tell hou how many gouges and missing pieces there are throughout the whole house.

For this review, I have chosen to only focus on my using this to help repair the underside of my french doors would had a serious 5 inch gash on the bottom. First I scraped away any flaking wood and deglossed the area so i would have clean template to work with; next I started with the first layer of the DAP Wood filler and let it dry over night, the next day I added another layer and let it dry for half the day and then added another layer.

It is definitely key to make sure to allow each layer to completely dry! Thankfully My dad has worked with a similar putty and guided me a bit but the directions on the back are pretty clear. There was no expansion that i could tell, it was like a hard plastic and was super easy to sand down with a bit of patience.

I highly recommend fine grit sandpaper for this part. I have yet to figure out what i want and with winter here, i can’t really work on the gash on the other side but I am very happy with DAP. Next year I’ll know if it can take a stain like it says it can.

I also would like to mention, this should work way easier on a small project than what I accomplished, but why not out it text right! I docked it a star because right now only time will tell how well it stays in place and replaced the missing wood; as of now I am quite impressed and highly recommend for any Do it yourselfer like me.

I use DAP Plastic Wood Filler to repair wood trim in my rental units. Tenants are notorious for putting holes in the wood work for everything from window treatments to hanging potted plants. Even though you tell them to put holes in the plaster instead, many do not listen so I am often filling holes in woodwork after move-out to make things look nice for the next tenant.

This wood filler works quite well for small applications and is best for sanding and painting to look seamless. In larger applications, even after following instructions for multiple coats to build up thickness and allowing adequate time for drying between, it still isn’t the most effective fill product because it tends to pull away from the edges as it shrinks and moves different from the wood through natural thermal cycling.

It also is pretty obvious when stained that it is a patch since it doesn’t take stain the same way the surrounding wood does. Most of the competition behaves the same way, so it’s not that this product is not as good as others, it just advertises a bit more than is practical for use if you want a nice looking finished product.

Great product, easily mixed and cures to a workable set in a matter of minutes. Straightforward toothpaste style tube of hardener which is much easier to handle than the flat sachet that comes with other products.

Dries white, can be knifed to shape with a sharp chisel as it is setting saving time and then easily sanded. Knifing saves a second coat if the product slumps. The trick is to apply more product than is needed and cut it back just when it starts to cure.

It goes through a ‘fudge’ like state before fully hardening. Leave it too late and you will have a rock hard problem so don’t get distracted if using this cheat! Had a rotten windowsill filled and painted within 15 min using this technique (after overnight treatment with wood hardener) Great emergency item to keep in your van.

For larger jobs I’d normally use two pack fillers but on this occasion I only had to fill a dozen or so countersunk screw heads. It wasn’t worth mixing up a two pack filler for such a small job so I thought I’d try Everbuild wood filler.

My initial thought were that it was rather sloppy and I feared it would just crumble away when dry. I followed the instructions, leaving the filler proud. It dried in the specified time but then I left it overnight.

Wow, it dried rock hard and was far from crumbly in fact, I regretted leaving it proud as I found it difficult to rub down. My view is that next time I use it, I’ll leave it flush, allow it to shrink slightly (as all fillers tend to do) and then top it off in two hours after it’s dried.

I’ve tried all brands of wood filler and keep coming back to everbuild for three reasons. 1. Price. 2. Ease of sanding. 3. Longevity of stored product. I also like the 2part everbuild filler for bigger jobs, but find that understandably harder to sand, so for everyday jobs this is my go to filler.

About 10 years ago, we finished our bare Civil War-era heart pine floor with Pure Monocoat. And truly, the oil has been remarkable given the fact that we did not maintain properly! Using the woodfiller, I was able to do some repairs to nail head holes and other needy areas.

I did have to find stain to color the medium woodfiller to the appropriate color, but besides that, it was easy to use, hardened well, and accepted the oil.

I liked that you can mix to the consistency you like, it sands well and takes the oil pretty well, though some pigment gets stuck in the fills. The major down side is that if you use the filler before finishing, it stains anywhere it touches and takes quite a bit of sanding to remove.

This was with the medium tone on Doug fir.

Okay, the good news is that this stuff dries very hard. The bad news is that it dries very hard. What I mean is that for a very strong hard filler, this is great. The problem is, it is more difficult to sand than other comparable fillers.

If you just want to fill a few scratches and be able to sand them easily, this may not be your first choice. Although, to be fair, smaller repairs aren’t too bad to sand. I’ve used it to fix some gouges and heavily damaged wood, and let me tell you, it is hard as a rock.

Difficult to sand compared to other wood fillers I have used, but definitely stronger and I would assume more durable. I use this filler for projects I know are going to need a really strong repair, while I use another brand that is easier to sand for smaller things like nail holes and small patch jobs.

Product has good consistency, spreads and fills well. Accepts paint well, but contrary to label claim it does NOT accept stain. If you are looking to refurbish and overpaint, then this product is acceptable.

However, if you wish to stain, this product is unacceptable. I would not recommend this product as there are many other products available that will accept stain well.

A good product useful for woodworking and other projects where a hard, durable filler would work. Major issue is the solvent, which evaporates quickly, which gets the job done but also means it dries out in the can even if the lid’s on tight.

I get around that by adding a small amount of acetone time to time, then it lasts for years. It’s as good as brand name products re: applying, no wood filler is really any easier to use. If you don’t apply too thickly, and sand down any excess, it works just fine.