20 Best Wireless Thermometer For Grilling (2023 Updated)

Great deal and happy to support Irish store

I’ve had my MeatStick thermometers since last summer. What I can tell you is that this thermometer is the last one I’ll ever use. I have gone through a lot of thermometers in the past. The wires that connect to the probes are an absolute pain in the ***! Oh and did I also mention the extremely short lifespan of most of these wired thermometers?! I have a bag full of thermometers I don’t use anymore, because they all broke, and quit working, and always at the wrong time.

I understand the MeatStick is a little expensive but compared to the money I’ve thrown away on the ones that don’t work anymore, the purchase price is a drop in the bucket. I do recommend getting the Wi-Fi Bridge for sure.

The original MeatStick’s keep track of the internal temperature as well as the ambient temperature. The new Mini MeatStick also keeps track of the internal temperature, but does not have an ambient temperature.

So if I’m doing a cook that requires two thermometers, the Original MeatStick goes in first because of the ambient temperature, then I add a New Mini just to make sure it’s the same internal temp throughout.

I’ve had some communication back and forth with The MeatStick’s service department, no big deal just some questions. They were so helpful. Making sure all of my questions were answered and that I’m very happy with my MeatStick.

If you’re looking for a thermometer, look no further than the MeatStick, you won’t be disappointed.

The concept of this probe system was exactly what I was looking for. The problem is the complexity to get it working. As a new owner I was expecting more product support since it’s anything but plug and play.

It took over an hour to get 4 probes connected and my meat on the smoker. Even after all that time I was not able to get the probes to run through the wifi setup. I could only get them to work via bluetooth.

That was the biggest disappointment after spending $500. Running a close second was the ambient temperature readings. I was really excited to be able to capture the ambient temps from all areas inside the smoker.

However the readings were no where close to the actual temperatures. running 50+ degrees low. Definitely not something that I would trust. I’m going to give it a couple more tries with future cooks and hopefully will figure out the trick to get them to connect to the wifi bridge instead of just bluetooth so I can monitor my smoker from afar but right now I’m less than impressed by this product given the amount of money invested.

I was hopeful it would blow away my FireBoard system as I was really looking forward to a truly wireless option.

I’ve been using The MeatStick for about two years now and I love it. It is my go to meat probe whether I’m at home smoking a chicken for the family or out at the beach grilling up a tri-tip for friends.

Their was a small learning curve when I first got the MeatStick but soon after I just loved the ease of use. I had a hiccup with one probe and was assisted quickly with a replacement after some troubleshooting tech support, a few pics to customer services, I was sent a replacement probe and I was back in business.

I currently own 4 probes which includes the two of the 2020 red version, a mini and the new grey version MeatStick. I must say, I use the mini the most now, but the others are perfect for my smoking needs because of the ambient temp, which alerted me when my pellet grill flamed out and when my barrel smoker needed a little more fuel.

I strongly recommend this product, due to its performance and I had a great experience with their customer service. For all of you that need to step away to run an errand, the wifi extender is awesome! I was miles away at target running an errand and I knew where my temps where at, so cool! Happy grilling all!.

I was hesitant to spend this kind of money on a thermometer, but I took the plunge after one too many disappointing brisket results. Just a couple of cooks in and it’s proven it’s worth its weight in gold.

The ambient thermometer showed that the temp gauge on my smoker was way off (explaining why all my cooks took way longer than I had planned for), and with the bluetooth repeater it means I no longer need to constantly go out to check on how things are going.

I can even see when the smoke is starting to cool so I can anticipate when I’ll need to top up the fire with wood. If you’ve already dropped $1k+ on a barbecue setup then you might as well spend another $200, and at least ensure that you get the results that were promised in the BBQ brochure!.

Great concept however very disappointing that the phone needs to be directly next to webber for signal not to drop out when cooking with the webber lid on. Really disappointed with the lack of range when it advertises 50m range, we can’t even get 1 metre away with lid on webber.

It works well as far as assisting with cooking meat perfectly but the extra money for better Bluetooth range is a rort. Guttered it doesn’t live up to what it says it will do for $200 i expected alot more.

Pointless having a wireless probe when phone has to be directly next to webber anyway, so close I’m worried about heat damage to phone just so signal won’t drop out. My wired thermometer for under a $100 works just as well just doesn’t tell you approx cooking time.

It was a birthday present for my husband, it works but the Bluetooth range doesn’t live up to its promise. Overall disappointed with product for price.

I’ve used Maverick wireless thermometers, Weber’s iGrill setups, and many generics. I’ll say that the biggest competition for this is the generics (sometimes price does win out). If you’re not going for the cheapest solution, get this.

This setup just works. It works every time. It works without any hassles. It doesn’t require pairing, Bluetooth, or apps. This won’t become defunct when that app becomes unsupported or ask for all sorts of permissions to your data.

It’s just a thermometer, a display, and a wireless display. The thermometer probes yield consistent results (between each other and my previous ThermoPro probes. This is unlike my iGrill where half my probes vary by 8-10 degrees F.

The range is superb (I never got anywhere near the range limit, but I did throw several walls in between with no issues. Compared the other units (including cheaper generics), I think the reliable temperatures, easy to use controls, and availability of ThermoPro replacement bits makes this a winner.

As an added bonus, I like the fact that the probes can be used for whatever. I have twice as many Web iGrill probes as I need due to the separate pit and food probes. None of that nonsense here.

I love how easy this is to use and adjust. The long probe wires make it easy to put your main unit anywhere near the grill, and the wireless receiver is a game changer for being able to smoke items for long periods There are a couple things that could be done to make this easier to use.

More intuitive methods to set temperature or change alert settings from the receiver would be helpful. Additionally, the backlight on the receiver is really touchy – I’m constantly turning it on by accident.

I use the humidity controller and two WiFi temp controllers to set and maintain the desired environment in a horticultural research setting and they work very well. The app needs work for the product to be 5 star.

but it does allow for monitoring, changing set values, making rules across the controllers and has the ability to export the data in CSV format which is very useful however it feels like a beta app. A stable bug free app would make these controllers hard to beat for function and price in settings like mine.

Tip. We mainly use the app in an Android emulator in both Windows and Linux but we do use it in phones well.

We love this griddle. Everything from steaks to pancakes, eggs, fried potatoes and burgers and hot dogs come out great. Easy to clean especially with the cleaning kit. The 2 cover set is great. One cover to put over it when you want to leave it out and one zippered cover with handle to store or travel with.

With a 2lb propane tank it travels easily and you can use it anywhere. I see us using it in our garage to grill all winter even if it’s snowing outside.

The heat pad is a very gentle heat, which is what you want. It won’t maintain the temperature of a worth unless you have it inside an enclosed space. I have the pad inside a fridge and the fridge and pad connected to the wireless inkbird.

Temperature is spot on all the time. Wireless functionality is awesome. Get alarms wherever you are if something goes wrong with the temperature.

This product didn’t even last the first smoked brisket! The transmitter has a short where you plug-in the probes. I had to keep unplugging then plug back in only to lose the signal yet again. So frustrating! I will be returning.

I bought because of the 6 probe capacity and Bluetooth app features. I also bought 2 additional probes. To their credit, the GrillEye app is super easy to sync with the transmitter. And it also allows you to customize, rename and set temp alarms for each probe independently.

The app even has a graphing function for each probe that measures temp over time. The graphing feature was really cool but it’s worthless if the signal keeps dropping. The probes themselves seem very well made but the transmitter box is cheaply made.

Academy’s on-line purchase was easy and their shipping was fast. As always kudus to Academy but I will be returning to the store.

Bluetooth that actually works inside my house. I used it today cooking a meatloaf on my PB Tailgater. The grill was inside my detached garage. I had steady 2 bars of signal through 2 walls and 40′. I walked to the bedroom at the back of the house and lost signal in the bedroom which added 30′ more and three more walls.

The BT on this device really works well. App works good too. The probes are very nice, heavy duty. After reading the reviews on the igrill2 and the problems with the BT range with it I decided to go with the Grilleye, glad I did, and saved $30 too.

I bought this to help me monitor a smoked brisket on a Weber Kettle. I used one probe for grill temp, and one for meat temp. There are two grill grate clips included, which allows you to place the grill probe about a half-inch above the grate – that worked great, with one caveat: I was using the snake charcoal method (which worked amazingly well!), and as the burning coals made their way around the grill and approached the probe the grill temp jumped.

Once I relocated the probe the temp normalized again. The tip: make sure you locate the probe so that it isn’t directly above the burning coals. The audible alarm kept me focused on what was going on without having to pay close attention.

The cook took about 8 hours, and close to the end the low battery icon appeared. The included batteries probably aren’t high capacity – I’ll replace them with beefier batteries before the next cook. I enjoyed using this product, and recommend it for sure.

It doesn’t have a phone app, but I didn’t miss it.

My house is really long with my grills at one end and the kitchen at the other, I know, I didn’t design it. I was worried that the range would be an issue, however I am happy to report that it works great.

I am no stranger to Maverick products which is why I picked this particular BBQ thermometer. I once had a Maverick probe thermometer which I just left outside, probe and all or over five years directly exposed to the elements.

Snow, rain, same battery, it stayed right next to my grill, and never died! Well, it eventually died when I accidentally dropped it into my hot tub. Thus far this one seems solid (I will probably keep this one inside though).

I bought this for my husband and he absolutely loves it. Eye round roast came out perfect on the grill!!!! The wireless it fabulous. Easy to set up and use. 500 feet wireless is the bomb. Would highly recommend if you grill as much as well do.

My wife bought me a smoker for my birthday, (had no clue I was getting one since I never expressed an interest) and I had to figure out how to smoke a brisket. My first brisket didn’t turn out to good.

I purchased a probing thermometer where I had to open the smoker and insert it from time to time and simply couldn’t get it right. I saw this thermometer and thought I would try it. Gosh, it worked better than I imagined.

I put three of the probes into three different parts of the brisket as well as one in the smoker to watch the heat. Boy did my second brisket turn out great. It was nice to be able to see the temperature of the brisket without having to open the smoker every couple of hours.

Did I have any issues with the bluetooth, no. It was nice to be able to be inside the house and know what the temperature of the brisket was. I do highly recommend the thermometer.

I’m generally an anti-technology guy. I like old cars without computers and the same goes for my barbecuing. I was hesitant to get this product because I didn’t feel that I needed it, but I was wrong.

It is helped me manage my temperature zones, different meat cooking rates and monitor the heat range that my firebox is putting out. Also, when doing 20 hour smoked brisket I don’t have to get up every 30 minutes to check temperatures I can just monitor what’s going on with my phone.

I’m very happy with this device and can highly recommend it to anybody. I also like the steel construction all around. People have bought me things in the past that have broken and we’re not up to the task.

I can say fully that this is a product you will not be disappointed in.

Installation was pretty easy; I looked at some videos that were out of date for my bbq so they didn’t help and only confused matters. My advice is don’t over think it as the written instructions are pretty straightforward.

It works easily and the temp is easily accessed on the iPhone app. My wife says I always undercook chicken. Using a temperature probe on the largest piece made sure that didn’t happen.

Have used it twice now and so far so good. Nice to set it and walk away and still read the temp in my house while doing other things.

So far so good! It’s been great! Have access to your recipes is awesome. I have had gas grills up to now and it’s a whole new experience. With your help I’ve done a brisket, steaks (reverse seared) and have come out great.

I’ve ordered and received different flavored pellets and can’t wait to try them out! Thanks for checking in!.

Several times now the temperature will freeze and not indicate the true temp. End up using a different thermometer to check the accuracy and the temperature is way over what it tells me on the app. The app is not user friendly.

For the cost of this thermometer, I’m disappointed.

I bought this item since I didnt have an internal probe. First used it for testing and found that I was losing signal, then figure out I needed the base on the Traeger, after that, this thing has been flawless.

Anyone who gives this bad reviews really doesnt know how to use it. Yes it looses signal on a brisket wrap, I just took it out and reinserted after I wrapped the brisket. come on people, this is not that hard, think before you cook.

I really like the convenience of being able to monitor the temperature of whatever I have in the smoker and doing other tasks at the same time. The instructions said that it has a 90 day warranty but shortly after receiving it I got an email from the manufacturer telling me that the unit has a five year warranty and the probe has a lifetime warranty.

The entire unit appears to have a solid construction, the handheld part fits nicely in my hand and the belt clip is not the flimsy, easily broken type I haveseen on other devices. Very nice product!When we came south for the winter I left my ThermoPro at home.

Upon discovering this, I ordered another one. It is proven to be just as accurate as my original purchase. With the accuracy and convenience provided, this is a very good value.

Does everything claimed. Works in both Celcius and Fahrneheit. The sender attached to the probe puts out the temperature reading about every 5 seconds and to switch off or on needs and extended push of the button (2 – 3 secs).

The receiver is very friendly in that it beeps to announce that it is on when you press the side button for 2 secs. I use it with custom temperature setting mostly but there are lots of temperature presets for various meats (rare, med, well done).

Very accurate compared with other temp probes I own. Love the fact that I can walk away from the stove and read the temp of what I am cooking while watching TV in another room. It is possible to set a timer countdown and still monitor the temp at the same time – neat.

I purchased this item at my local Academy Sporting Goods to replace a Charbroil wireless unit that failed after a few months. What I liked about the RediCheck was that it had two probes which is very helpful when cooking multiple items, probing different sections of briskets or monitoring the cooking box temp along with the food.

What I did not like was the complexity in programming. Additionally, after only a few months usage, one of the probes has already failed. The thermocouple never indicates below 130 degrees and does not track anywhere along the profile.

I guess I need to give up on the cheaper models and spend the $$ on the better units.

This a must have piece of gear for anyone who smokes meat on a regular basis and cannot spend all day (and/or night) sitting by the smoker. This allows you to monitor smoker temperature and food temperature and to set alarms for too high and too low smoker and food temperatures.

It works well longer distances into the house and the neighbor’s yard. I can’t think of any improvements I would make. I’ve had mine for several years now and bought the latest one for my son.

I purchased the ThermoPro TP20 primarily to use when smoking meat/poultry in my masterbuilt gas smoker. I used to use a combination of an iGrill bluetooth thermometer that would send the smoker box temperature reading to my smart phone along with a standard corded digital thermometer to check the meat temperature.

Using the iGrill was okay, but I would always get bluetooth dropouts and have to reconnect and stuff. Plus I had to physically go out to my smoker to check the meat temperature. I could have purchased another iGrill probe and kept with the smartphone connection, but I was sick of disconnects – oh, and all the while my smartphone battery is draining and I can’t really roam too far away.

So I decided to look for an alternative and found the ThermoPro TP20. I used the ThermoPro for the first time to smoke a whole turkey for Thanksgiving 2018. The ThermoPro worked flawlessly. Both the probes report the temperatures from the base station to the remote station.

Also both of the temperature probes are a good size, really substantial compared to other probes I have used. I was able to program max temp thresholds and received alerts when for instance the smoker box temperature raised too high.

I could leave the remote station in the kitchen and not worry about having my smartphone tied up with this nonsense. There were no disconnects between the probes and the base or remote stations at all.

I did not test how far I could wander with the remote station though – all I know is that it performed much better than the iGrill bluetooth connection within the same vicinity. And that vicinity was really as far as I needed it to go – I can keep it in the kitchen, it works, no disconnects, I’m good.

I was highly impressed by this device and glad I didn’t need to tie up my smartphone anymore – and now I could use my smartphone’s bluetooth connection to connect to a portable speaker for some music rather than temperature readings.

I recommend this to anyone who is interested in monitoring the temperature of 2 items at one time (i. e. : maybe two meats, or maybe just one meat and your grill/smoker box temperature). I like the rubberized skin that the devices are covered with – they are bright orange so I can find the remote station quickly and will protect the devices from minor drops.

This is easily a 5 star product. It was easy to set up and use and provides nice convenience so you don’t have to hover around your grill/smoker all day.

There are some very small changes that could be made to this product to elevate it to a 4 or 5 star product. As it stands it is a solid 3 stars. Honestly the price is the major redeeming factor here.

I will break down the specific pros and cons. PROS:*Price: It is at least 15-20$ cheaper than comparable dual probe wireless thermometers*Easy pairing, good range*Both food and BBQ temp are displayed at same time on main controller*Grill clip is included for BBQ temp probe*Countdown timer function nice addition*Probes appeared to be accurate when compared to my other two thermometersCONS:*Button configuration makes zero sense, critical buttons are referenced in the instructions but not labeled on the unit.

For example: Press F/C button to toggle between Fahrenheit/Celsius. ok got that but it is also the Alert button? They obviously can label buttons on two rows with a divider bar (like Start/Stop button) so why not have F/C // Alert on the button? Also Mode/Light button is the enter or confirm button to enter your target temp?? Why even have a light button? Make it Mode / Confirm or Enter*There are no UP/DOWN arrows; if you overshoot your upper range on food temp or BBQ temp you have to cycle through 575 degrees and back to 0 and then count up again.

While it does cycle 10 degrees a second when you long press that is still a massive oversight in design. Also when you do hit your target temp you better be lightning quick on hitting Mode/Light to confirm your desired temperature or it will just reset to the last confirmed temp and you will have to do the cycle all over again.

Seriously. who came up with that programming? If I long press a button to set the temp, it should just accept the current temp after that short period of inactivity. *Backlight button is pointless, if I have to grab the main unit to hit the light button I can most certainly read what the temp is.

There shouldn’t be a light button at all, just make the backlight turn on briefly for ANY button press. The light should do something useful like flash when target temp is reached or stay on for 5-10 seconds for every 10 degrees closer the food temperature gets to target temp.

*Probes are pretty dang short, another foot would have been much appreciated*There is no indication on the unit which plug port is for Probe 1 and Probe 2 (with it facing you probe 1 is on the right, 2 on the left FYI).

*The rubber bumper is pretty loose like a cheap cell-phone case (the grey portion in the picture), however, without the bumper the unit would feel/look extremely cheap so I am glad for it. *There should be a magnet on each of the clips for the transmitter and receiver.

I know I am grasping now but the devil is in the details on products like this. Overall I will keep the product because it worked and I don’t want to spend $75-$80 for a similar product. I just hope Therm Pro reads these reviews to implement product changes**Model Number TP-08 tested**.

First off there was some operator error on my part. On my first cook I was not getting the bellows to work. I called the hot line and a very patient person answered my call for help. He patiently lead me through the trouble shoot and he help me find that I had the fan plugged in to the wrong plug on the smoke X4.

After that the cook went off without a hitch and has worked fantastic ever since.

I was a little worried about the signal getting through my 1000 pound smoker based on reviews from other cheaper products out there but the Smoke X4 did it no problem. Haven’t yet tried the signal from long distances but I wouldn’t be going further than my backyard and kitchen anyway.

The rubber color probe rings are a good idea but I ended up writing on a piece of paper for the day what probes 1-4 were in and didn’t use the rings (1=pork, 2=chicken, etc. ).