20 Best Way To Farm Spinmetal (2023 Updated)

It’s cute BUT I was expecting a product that matches the measurements given . It doesn’t it’s much smaller. Nicely made though.

I got this for my Sweet Daughter as a Christmas Present ! It’s a Great Addition for her Farmhouse Kitchen !

It’s light weight and beautiful! I love this on my dining room wall.

I purchased the T50 to put up plastic sheathing on my walls. The heavy-duty version seemed too heavy for my shoulders and arms for extended use. There were no other styles available in my town. MY biggest complaint is that the handle is NOT OFFSET so I smacked my knuckles on the wall studs when I hit hard enough to sink the staples which led me not to hit hard.

I see on your website that you make one with an offset so the knuckles are safer. I would like ALL the tackers to be made that way. Thank you.

I use this tool primarily for roofing. it works well and doesn’t jam very often as other hammer tackers I have had. easy to fill. light weight and balanced well. it’s nice to have a solid piece on the top of the tacker to use as a hammer in the event that a staple doesn’t go in all the way.

I have bought this tool many times and recommended it to others. promotional code 0121.

The driver slid breaks after minimal use. I’ve bought 3 of these tools and on all three the slide driver snaps after about 2 days of use. For the price of this tool arrow should make a better driver.

I have several arrow staplers that used to belong to my late Father and they still work excellent. BUT NOW THE NEWER TOOLS ARE MADE OUT OF SUB STANDARD MATERIALS!!!! PLEASE!!!!!! make a good tool or STOP making them !!!!.

Bought this kit a week or two ago. Set up the fermenter as per the instructions – I’ve brewed beer in the past but nothing for years. Used the included Turbo Production Pack, which included everything needed to put down a sugar wash.

Again, just followed the instructions and it was incredibly easy. A week later it had finished fermenting. Set up the still and transferred the wash into the boiler. Distilling (again) was so easy a child could do it – I wouldn’t recommend that though as the outlet water from the still is scalding hot! 3.

5 litres of 90% pure alcohol was the result. I’ve now made a bottle of Coconut Rum (Malibu) and a bootle of coffee liqueur (Kahlua) and both are delicious! Could not be happier with my purchase.

4 out of the 6 I purchased work well. 1 has a loose thread and leaks vapour from the lid and colum the other is bent and won’t seal correctly. I was just going to put up with them but I keep getting emails to leave them reviews so here it is.

The ones that work are great but statistically not good odds you’ll get a good one.

First timer here. Honestly such a good package comes with everything you need to get started. Finished my first batch last night 🙂 so happy with my purchase. A great starter kit I am ready to do it all again :).

Nice quality. Easy to install. Works for my situation. Definitely heavy duty. My gate was built to conform to a slope so the extra length was necessary. Wings on the shaft work to lock the drop rod in place when not in use.

The wings fit through slits in the hardware when the drop rod needs to drop. Takes getting used to but works very well.

This is a heavy duty drop rod and well worth the price. My neighbor liked the quality of this product and decided to order one for himself and one for a friend. You won’t be disappointed.

Nice, heavy duty stake. Add says “stainless steel”. No where on package does it say stainless steel. I believe its powder coated plain steel. I’m at the beach. We will know for sure very soon.

Shipping was a nightmare, 1-2 weeks means start making phone calls after 2 weeks if you want it within 3-4 weeks. Then you have to schedule a time and take off work for a full size semi and trailer to drop off the small 95 lb package while blocking traffic.

Harrow itself seems like it would be OK grading sand such as a baseball field, didn’t scratch or do anything to my small plots. Had to pay to get plots turned over and then after seeding went over seed 6-8 times to try to break up clumps and level off.

Seemed to do a ok job but destroyed the seeds in the process and at $600 per acre x 6 acres of seed all together that hurt.

I was removing a 2018 Toyota Camry Hybrid steering intermediate shaft, which was rusted like it was soaked in slat water for ages. I sprayed another leading brand oil and it didn’t even help over a day soaking with it.

After reading reviews about PB, I said let’s give it a try. To my surprise this thing worked within 15 minutes. During the removal I applied it twice on the shaft teeth to facilitate a smooth removal.

A must have for an automotive DIY’er in their tool box and throw or recycle all the other rust penetrant canisters. There is nothing worse than getting stranded with a rusted hardware in the vehicle you are working on.

Seemed to work OK. I bought it to just loosen up a windshield wiper arm hinge and spring. They werent actually seized but were tight and not putting enough pressure on the windscrean for the wipers to clean properly.

Seamed to help a bit. PB B’laster isn’t specifically a lubricant so I hit the joint with some Bitron Penetrating Lubricant a few days later. That seemed to help a little more yet again. Next week I install some Yeti spring assisters!.

Socket slipped and I badly rounded a 14mm bolt whilst removing brake rotors from daughter’s car. Was sceptical but these Irwin bolt grips were my last resort. Apply some CRC or WD40 to the bolt first.

Placed the bolt-grip onto the bolt and gave a light tap to sit it there. Do NOT hit the socket bar but apply firm even pressure to enable the bolt-grip to screw down on the bolt head. Needed some force and I couldn’t believe it when the bolt freed.

worked great, other options failed. No room to do much this socket handled it easy. 3/8 bolt, 9/16 rounded off short head. Had to use 18 inch flex handle with a pipe and it still did the job. 1970 gmc small block chevy rear manifold bolt drivers side.

Purchased the 6 gallon Behrens galvanized metal can with lid to store cat food in as ants had discovered it when in the original bag. Perfect size to hold the 16 pound bags of cat food. And so far no ants as the lid fits securely! I bought in May 2022 so have used it for about 2 months.

I have seen reviews complaining about the lid being too tightly fitting however as a 60 year old woman I have had no issues. The lid removes easiest by grasping the lip of the lid on one side with one hand and pressing down on the pail handle holder on the same side of the can with my other hand.

You cannot just grab the lid handle in the middle and yank it off. i am very happy with the purchase and in fact am ordering two more cans to store pet food in.

These are terrific utility pails for all sorts of things. I have one next to the grill/smoker for ash collection. Another, for bird feed. The lids lock tight, and well enough to keep any critters out.

The galvanized steel will last nearly forever, and I store them outside on a covered balcony, but outside nonetheless. In New England, so they’ll see plenty of weather. They are built tough, and the bonus is that the company, Behrens, manufactures them right here in the US.

Can’t go wrong with these. The only caveat is that they are not packed very well for shipping. Each time, these, and a 20 Gallon, came in fairly lightweight cardboard boxes with nothing but a small amount of paper in for protection.

So if the box takes a hit, they might dent; one of mine arrive with a dent, but this is galvanized steel and is elastic enough that I was able to pop it out easily with a small suction cup.

Extremely disappointed. We were having problems with raccoons in the barn chewing their way into the wooden pet food container. We ordered this as it was supposed to have a locking lid. As it turns out, the way it locks is by pulling the handle up.

All the raccoons had to do was knock the container over, and the lid would unlock when the handle went down. A total waste of money, and we didn’t bother sending it back because shipping was $11. 95 and then it was going to cost about the same to ship it back, and we were not going to be reimbursed for shipping cost.

Won’t be shopping here again.

Ugh. this stuff! Walmart was out of Loctite brand, so I got this. It might “set” in 5 min, but its sticky for hours. It also thinkens pretty quickly after you mix it. I’ll find Loctite online and hopefully never need to use this brand again.

For what I use this for, it just doesn’t work well. The Loctite brand doesn’t thicken as quickly so I can typically use the entire amount I mix, it also completely dries much faster.

It did not harden. My application was repairing my glasses frame, metal-on-metal. I mixed the two parts of Gorilla Glue Epoxy thoroughly, used a tiny dab on an applicator, clamped it, and let it set over-night.

Not only did the repair not hold but the spot on my tool bench where I mixed the epoxy was still a sticky. It may work for others, but for me it did not harden.

The idea behind this product is great because it’s one piece and easy to use. It is a bit small though and if you spin just a little too fast, the contents fly out over the top. You certainly can’t wash and dry a whole lettuce but it’s pretty good for small fruit and small quantities of lettuce.

I think this product is very interesting and helpful. A lovely 2-in-1 product that does the job. At first I was a little confused on how to move it but after looking at the picture I had no issues. Now it’s super easy! The only reason why I’m not putting 5 stars is because you can’t fit a lot of produce in it.

When getting the lettuce ready for my salad I had to use it twice to be able to clean all of my lettuce.

I love this salad spinner! I’ve had some before that were super bulky and had so many parts to clean. This one is super simple and I love how you can fold the handle over to make it skinnier! It definitely rinsed my lettuce and spinach well and spins at a good speed.

My toddler loved helping and it was easy enough that he could do it!!.

That glue held. It’s just too bad the plastic broke again in a different place than I had glued…lol

It is as strong as it claims.

Well built, but the plug they sent doesn’t fit at all. Home Depot wouldn’t send a replacement. Terrible service on a very expensive purchase

Product is easy to use and manoeuvre Nice weight for our lawn tractor. Easy to fill. Could use a bit more rust protection.

My lawn was pretty rough due to night crawlers and an occasional hoof print. I waited until the lawn was semi-damp from rain and pulled the roller with my ATV. It took care of the problem. Totally pleased with the product.

If you’re going to be using the cut off disk a lot you dont want to be caught with out one. This mandrel makes it a nice fuss free tool free blade change nice and quick. Practically no downtime to change the blade off fir a new one.

Dremel has provided me this product in exchange for an honest review.

This mandrel holds the larger, much stronger EZ-Loc metal cut-off wheels needed for small jobs. Quick change feature is a big improvement over the older screw-attaching mandrel. Highly recommend the minor investment for more convenience.

In Northern New England, winters can be brutal, and the salt gets into your car’s body causing rust, even if you take it to get washed. Quiksteel has saved me hundreds of dollars in repairs. I went to get my car inspected.

I was told it wouldn’t pass without patching some holes that I couldn’t even see looking at the car. They were underneath but it still had to be repaired. I purchased a couple tubes of Quiksteel, mixed them together and applied them to my vehicle.

They were steel solid in minutes and I took my vehicle back to the inspection station where it passed without a hitch! I heartily recommend Quiksteel! And to know that it is drinking water safe, well that means I can make in-home repairs if needed also.

I used to swear by WaterWeld because it was drinking water safe. Quiksteel is as good as that, and better by far for so many other things as well, I am so grateful to know I can use Quiksteel without fear!.

I purchased this product to repair rust damage on a car battery support bracket for a 20 year old car. It did a good job on the platform directly under the battery, holding the rusted parts together and taking the compression well.

On the other hand, the repair on the metal forming hole for the support rod didn’t work out well and broke when the screw was tightened down. I think the reason for this is because the product only holds compressive loads well.

The part that failed was a pulling load on a fatigued metal part. To fix the problem I decided to leave the metal misaligned so that it would place more of the strain against the metal rather than the putty repair.

This worked and it held after the repair. Disregard the reviewer who says it won’t harden. The instructions clearly state that you have to kneed the putty to a uniform color before it will set. She must not have done that.

Used to replace the plastic clip that held a heat-shield stud to the gas tank strap on our Toyota Corolla. Bolted the stud back on the heat-shield, then mixed a wad of this epoxy and pressed it into place between the strap and the stud where the old plastic clip was mounted.

I cleaned and scratched up the head of the stud and strap to give surfaces for the epoxy to bite. Still holding nice and tight and no rattles.

They were out of stock when I got there….they sold me the next size up for the same price, and I got a $75 rebate from Bosch. Super pleased. Will recommend Tegs to all my buddies in the trade.

This is my second Bosch Rotary Hammer. My old one (15 years old) was lost in a move. I didn’t realize how much I use it. I used to be a contractor and needed it for work, often, now I use it to dig holes in hard ground, drill holes in concrete and remove marble from floors and counter tops.

Great tool, great price. Works for ground rods very well. Light drill vs my old less powerful spline Milwaukee.

As the title implies, these reamers are, in fact, the bees knees. But seriously though, these reamers worked well, and I was able ream and stuff.

I use these reamers for enlarging bushing holes in my clock repair work where I need larger holes than my 3 degree five-fluted clock broches will ream. The taper pin reamers do an excellent job.

Nice little reamer, and accurate to the description. I will buy more from this company.

Overall this is a very powerful professional quality angle grinder. I bought it to replace my heavily used Craftsman angle grinder I bought back in 1981. The trigger switch on the Craftsman went out for the third time in the life of the 35+ year old tool and I could no longer get the part to replace it.

It’s a real shame because I thought that thing was going to last forever. Anyway, the Makita seems like a very nice tool, the only issue I have with it is the weight. It is considerably heavier than other large angle grinders I have used including the Craftsman grinder.

At my age, you can guess because I was 18 when I bought the Craftsman. It is going to be a chore to hold it up for any great length of time. That is fine for grinding welds, but extended use on wood siding is not going to be easy.

That is not the fault of the tool, but I do wish it were a pound or two lighter. If it lasts half as long as my other grinder, it will outlive my working days.

Never any doubt that the Makita grinder would be first rate. Since it is a less sophisticated version there is a higher likely hood of increased lifespan. The 7 in. model is quite capable of supporting alternative 9 in accessories as needed because they share so much between models.

I initially was looking to get into the -much- lighter weight Hitachi, but after a bit more contemplation it seemed that wouldn’t be the smartest move when choosing this type of tool. If someone else were buying the tool, and providing replacements the Hitachi/(updated manufacturer) would have been OK, but since I’m not using it on a full-time basis (and providing my own tools) the Makita GA series was a smarter choice all together.

I’ve had this item for a couple of months now. This is a well balanced heavy duty grinder you can lean into to get the job done quickly. Start up torque doesn’t try to rip the machine from your hands (no its not a soft start) like a lot of grinders this size.

I use it with cutoff wheels, grinding wheels and resin disc. Does a fantastic job with any attachment I’ve put on it. I like that the guard is easy to reposition with a wide swing range.

Fills holes without a problem. Bonds Metal to Metal, Metal to Plastic well. The product is easy to work with, and easy to sand once hardened. Will not harden properly if it comes into contact with petrol or other chemicals.

Great for most repairs, however, if trying to fix a chemical leak the product is not correct.

I ordered this product to try and mend a plastic kick strip along the lower edge of my Fridge Freezer. I has proved partially successful. I could not find a Best Before Date and wondered whether is was past its best as it was slightly ‘crumbely’ when mixed.

Clear instructions for use. Surface of putty can be nicely feathered prior to initial “set” by gently smoothing with water moistened finger! Rapidly sets once blended, so don’t make more than can be used quickly.

Cures like stone. I followed the instructions and was very pleased with the results. Recommended.

Love everything about it except the switch. It has plenty of power to cut/grind anything I can throw at it. The extra airflow is great. That switch has almost made me return it on several occasions. It is extremely awkward to activate.

Once you get it activated it’s not too bad but if you have heavy gloves on it’s a real chore just to get it depressed. I’m looking at jumping out the little switch stop on the front of the paddle just because I can’t stand it that much.

I have used milwaukee tools for 25 plus years and have seen very good designs and some not so good from them. This switch design has to go!.

I use a small grinder to grind off welds, grind metal, wire brush paint and oxidation, cut off small profiles of metal, grind concrete and rock, polish rocks for lapidary applications, and much more.

The Good: Most of the time one is limited to a single r. p. m. , which invariably is in the higher range. This tool, where it is variable speed via a “dial” on the rear of the tool just above where the cord emerges covers a good range of r.

p. m. s. It is the variable speed that enables one to use the tool for so many different applications. High r. p. m. s for grinding steel or other metals; slower for sanding, wire brushing, and grinding concrete/ceramic; and slower yet for polishing.

I purchased this unit as a reconditioned grinder. Not only is there a savings, but I believe the technicians who service the units take extra care that everything is fully optimal. The Bad: While this is really not the fault of Milwaukee, especially where the tool has to be thicker to accommodate the power needed; but I am older with gout and arthritis.

While the thicker body of the tool is probably fine for you youngsters, I find it more difficult to grasp and control. To counter this I “jury-Rigged” a handle that comes off the right side of the tool and is secured opposite the threaded handle hole on the left side of the head of the tool.

(See the photo attached. ) In addition, the auxiliary handle allows for the grinder to draw more air into the motor and gear assembly to keep it cooler. For you lefties, one just transposes the handles.

The Ugly: I have purchased Milwaukee tools for years. I was a little concerned when I cranked up this tool to hear an oscillating sound atypical of other Milwaukee grinders I have owned. A I performed some wire brushing the noise diminished, but is still there.

Perhaps it just needs to be broken in.

I bought this from my local hardware store and unfortunately misplaced my receipt so I was unable to return this for a replacement. I used this grinder 1 time to sharpen my push mower blade. After 5a couple minutes of use the entire gear case was on fire and too hot to even touch by hand.

What’s sad is my 11 year old Skil brand grinder never gave me an issue until the spindle lock broke. I have tons of Milwaukee tools hence why going with them for a new grinder. I have all the M18 Fuel brushless impacts, ratchets, and drills.

This product was definitely a letdown.

I am only speaking to those people out there that know what this is used for and have used them in the past. Alright you know what this is and you need one. This is the one too get. The size is large and the quality is excellent.

What else could you want? You will need a pot to rest it on when you are ready to strain your Tomatoes and that is it. Remember that this large. That is a good thing. I have another one I purchased. I believe it is OXO Grip?? That is way too small to be useful.

This one a bigger and much more useful for straining large amounts of Tomatoes etc. Good Luck.

Very nice european food mill. Very easy to assemble and the handle glides without much if any resistance. This is definitely built to last a very long time.

the Food Mill saved me so much time making a large batch of our famous Gnocchi. easy to store and clean I highly recommend it.