20 Best Tempered Glass Screen Protector For Galaxy S10 Plus (2023 Updated)

A great product! First try had no issues and it was easy to install. Time will tell how it holds up but I am already feeling better that I have a nice glass cover to protect my s10+ screen. Have no issues using biometric fingerprint scanner and didn’t even have to turn up the sensitivity.

Highly recommend at a better price point than white dome. EDIT 8/30/21 over 1yr on same protector now The original protector I installed has met the end of its life. While its still doing its job It is time to change it out with the spare that comes with the kit.

I am very surprise how well it has held up and it has protected my screen from a few good drops. Yes it cracked but unlike so many other protectors this one didn’t shatter but just cracked. I have may cracks now and yet they are almost invisible and have not caused any issues or glass in my fingers.

I will definitely buy again in the future.

IT needs to be easier somehow? it is lifetime warranty, so if it holds worth the $ definetely. It is a little intimidating to use,I was really worried about liquid going all over my brand new expensive phone! but we did it and it did not spread around the front camera lens I just went with it.

Since I have no idea on how to do it over by taking it off , I left it on without it covering completing there. I have a good case on it so figure its all good. Overall, I think its a good buy. I would recommend, the fingerprint id works awesome and the new glass screen has the feel of the original phone screen.

If you are waivering about buying it, I would. It could stand to be less costly and a little less initimidating to put on.

I was apprehensive at first because 40 bucks is a lot for something that im most likely going to crack. I’m not very gentle with my phone. I should be knowing it cost a small fortune. Anyways, its easy to use and has very high quality glass.

It’s much thicker than any other protector I’ve bought. I always end up getting a 2 or 3 pack because I end up using the first piece of glass as practice run. Not this time. The tube that has the nano glue stuff.

haha dont know the actually term, but you got me. has just the right amount in it. I’ve had other glues seep out over the edge because they over fill those. But I dont think any got on the absorption pads.

Overall, very high quality materials. Even the packaging. I would recommend this to anyone. Very nice! High five!.

I know how hard screen savers are to install. I have had my share of failures. I know that basically you have ONE shot to get it right. This product is different from the others. They include the tools you need to do a professional installation.

The protector itself has precision laser-cut tabs that fit over a custom guide that fits YOUR phone. I went online and watched the company’s installation video, then did a dry fitting to make sure I understood how this all worked.

The actual installation was easy and went just like the instructions and the video showed. I had no issues and no bubbles. The screen saver feels good, is easy to clean, and appears to be very scratch and scuff resistant.

This product is superior because of the high quality installation kit that is included. It fits in my OtterBox Defender screenless edition case perfectly. I am very satisfied with this purchase.

I’ve bought Zagg shields since 2012. Overall a great shield, but this one is a little fussy when touching the screen. On my S10 you’re supposed to be able to double tap screen to get it light up and then swipe to open.

40% of the time I can’t get it to light up. Probably due to thickness of shield. Only annoying if I’m in a hurry. Also shield is thicker, so when trying to buy a case (one that only covers back and sides) the case sides often aren’t tall enough with this shield.

If it falls screen first, you’re likely to put cracks in the shield. That said, it’s better than cracks in the phone screen. Customer service with Zagg is #1 in the industry. Called several times over the years and they never disappoint in providing the BEST service and advice.

Getting replacement shields is super easy.

I have used Zagg glass protectors on previous mobiles as I am adept at regularly dropping my phone. They are a good product and saved my screen more than once. Better yet Zagg replaces shattered screens for cost of shipping which I have also needed.

This screen isnt the typical tempered glass. It is some hybrid with is much thinner than glass but has the same feel as glass. I cannot comment on its protection yet but that is just a matter of time.

I am hoping that this performs as well as their other pure glass screen protectors. I installed myself and it was relatively easy. The one thing I didn’t do which I highly recommend is using the dust remover sticky pad.

After wiping with alcohol pad and wiping with shami I looked hard and saw no specks if dust so installed screen. As soon as I put it on there were about 8 bubbles that despite my best effort with the squeegee I could not remove.

I was peeved but blamed myself. After about a week the bubbles disappeared! I dont know what happened but they are all gone. I suspect they may come back but am very happy that they are gone. So buy this but definitely use the sticky pad over entire screen to definitely remove any particles you cannot see well.

In my case the bubbles still disappeared but if I have to replace the protector I would follow ALL the instructions just in case.

This is the second Armr Suit screen protector I have bought for my Galaxy s10. Just like the first it is impossible to install the shield without air bubbles. I followed both the written and video instructions to the letter and still air bubbles appeared.

The instructions say that these bubbles will go away in a few days. This is not the case. I love the protection the shield provides. It would be perfect except for the air bubbles.

I was kinda worried when I 1st received my protector w just buying a new s10 plus I really didn’t want anything wet on my screen. I actually waited abt a wk b4 applying. the application was easy to do n my screen didn’t get very wet at all.

It had hardened w in 12 hrs n I have no bubbles no streaks n I absolutely love the protection I am getting from it. I wld recommend this product to anyone. I am very happy w my purchase.

So this is my first time writing a review and I recently felt products deserve more of them. I ordered my screen saver for a curved screen took some time and patience with getting it to seal fully but all in all it’s great, I’ve used Armorsuit any many devices over the years and I’ve recommended them to others as well.

The time of my order to arrival was quite soon 3-4 days. Thanks again for my order and I hope you all have a wonderful Christmas.

I LOVE the amFilm Screen Protectors, they have kept my screen(s) from cracking on MANY occasions. They dont work so well with the NEW Fingerprint stuff, but I dont use that anyway, AND, these protectors make the Touchscreen controls as simple as NO SCREEN PROTECTOR at all.

The Price is FANTASTIC and very easy to replace and install.

Nice glass protector but not shaped to conform with the contours of the newer Samsung Galaxy S-series screens, which have curved edges. As a result this flat protector has a band around the circumference that is not stuck to the screen.

I blame Samsung (mostly) because I see no need to design a screen which protrudes from the case of the phone and has curved edges. That said, the screen protectors are also to blame because they don’t cover the screen properly.

An easy to apply, high quality tempered glass screen protector that leaves no air bubbles. The guide frame works perfectly. Was an excellent price and I highly recommend to anyone looking for a great screen protector.

I Love the screen protector on my phone. It was easy to put on & there are no air bubbles. I also love the fingerprint protection. I recommend the to anyone that has a Galaxy S10 Plis.

The case is great but the screen protector is not. It shows every smudge and fingerprint. Also the cutout to use fingerprint scanning doesn’t work.

The cover fit well and is easy to clean. The extra cord fit my Galaxy S10+, but the car jack cord doesn’t fit my phone. I’ll have to call around Bradenton to find the correct car charger.

Product is exactly as described. Finger print works perfectly. My phone screen actually feels better to use. Couldn’t be happier with this product. Had a issue with the original one I ordered. Emailed mobile fun and within a week I had another at my door fiver stars ???? all round.

The cut-out us not necessary. The protector could be made just for the camera. No rim is required around the flash and sensor as doesn’t stay “stuck” for even the first day. Fortunately it also hasn’t lifted to hook on anything and pull the protector off yet, but suspect it will.

The protector is pretty good. When it’s on, it adds no thickness to the phone giving it the original feel. But, because of the way the backing of the cover is applied, it leaves an annoying line across the bottom of the phone.

I have had other films like this that dont leave any sign that the phone has a cover on.

In the end, there are no bubbles, and this screen protector works very well and looks very nice. I didn’t notice any reduction in the sensitivity of the touch screen. I think that it actually cleans up easier than the glass did.

I got this to protect an already badly cracked display. I will say that the instructions are a bit long and tedious but it is actually quite easy to put on. At first, I was a bit horrified the first day after waiting overnight, because I did the “wet” install and was careful to get all the bubbles out, but there were bubbles the next day.

Interestingly, they eventually all went away though without having to squeeze them out. And, now it looks and fits perfectly. So, if you get some bubbles after installation, don’t panic because for me they seemed to eventually escape out.

Thanks.

If you want a glass screen protector this is not your choice. This screen protector is more like TAPE. I applied this to my phone and look what you know so much rainbow dots and when I turn off the phone so much bubbles.

I can’t believe I wasted my money on this not recommended!.

Installation was straight forward. Cover is holding strong after two weeks battling my keys in my pocket and several drops onto the driveway. Image quality is still good, though polarized sunglasses will have an effect on viewing, though this does not render the screen useless, just brown spots.

My phone screen is like new. I wiped it down with the included wipes and got a near-perfect fit with the screen protector, but it can’t read my fingerprint. I even tried to reset my fingerprints with the new screen protector, but the system just kept telling me to either clean and dry the fingerprint sensor or to press harder or to cover the entire sensor.

When this screen protector is on my phone, the fingerprint sensor DOES NOT WORK.

It was very easy to install and has stayed on the phone. It was supposed to be fingerprint proof but it shows stuff. I continually have to wipe the screen with a soft cloth.

Recently received my full edge tempered glass screen for my S10 phone and its a great fit. Received it quickly, directions were clear, and the price was good.

Please carefully view the YouTube instructional video on how to install the RinoGear protector – the link to it appears on their website. The installation procedure is roughly the same for all makes and models of smartphones.

The first time I tried it the results were decent but not totally great. The second time I did an installation, it went even better, and I would call that a complete success. The cost of the item is reasonable, and the protection is excellent, so I can completely recommend RinoGear Screen Protector.

As this is a soft plastic cover there is no rigidity and the application method is totally laughable and impossible to install without touch screen side! It has 0 resistance to ethyl alcohol. I literally spilled a drop of an old-fashioned cocktail on it and when I wiped it off left a permanent “smudge” and it curled up at the screen edge.

This is the biggest POS screen protector I have ever come across.

I have not found a screen saver for my S10e that’s right, yet, but this is pretty good. It does not stick down all around the edge, and those areas have dirt under them. The dirt does not affect the functionality, but it’s unsightly.

I’d give a zero to all the other products I tried, though. I’d certainly buy this again!.

This did not adhere well to the curves of the edges of the phone. I ended up having to carefully trim some of it that kept on pulling up. Dust and dirt is starting to gather at the edges. Going to live with it for now and try to apply the second one that came in the package at some point.

Although it is a good product and it’s easy to use it did not come with alcohol wipes to clean the screen, the cloth to wipe the screen after, or the little plastic “bubble preventer” for lack of a better term, to push any air bubbles out for a smooth screen.

Got thing I save mine from a previous purchase as it does help. But I would but again as I have the other materials.

I’ve used several Simple Snap screen protectors. They are the best on the market. Recently I installed a new protector & somehow a large piece of dust got under the cover; I lifted the cover to remove it & it would not attach again.

I wrote to the company & received a prompt reply & a new screen protector. This warranty is for real.

Love this company and their products. They have been awesome at providing replacement products under the lifetime warranty program. The product is sooooo easy to install and very protective of the phone.

I would buy this product again for sure!.

I had selected a cover for my iPhone x. When I installed it. It did not work out. I had bubbles all over the screen and the face ID would not work. I contact Simple Snap because I had register my product.

I got a real fast response wanting to know my issue. I told them what the problem was. They informed me that the one I purchase would not work with the otter box cover. I needed a different one. With being register they told me that they would send me the correct one right away.

They would transfer the warranty and all over on my account from the old one to the new one. They had the new cover out the next day. I would purchase and recommend to everyone to purchase the Simple Snap cover.

The response and support was EXECLENT.

Works quite well if you follow the instructional video. I would recommend light use of phone after installation to allow complete curing of the film. Also wait a couple days to cure prior to placing phone back into a protective casing as edges can be lifted if case is by edge of film.

The screen protector was the correct fit for my phone. The installation instructions were clear. The installation was easy and after drying, the protector’s adhesion to the phone was solid. The fingerprint reader worked as expected.

I am very pleased with the ZAGG screen protector. It fits very well and provides protection across the entire screen. When paired with the OtterBox Defender Pro case on my Google Pixel 5 phone, I have every confidence my phone is well protected.

This ZAGG screen protector doesn’t seem to interfere with the touch screen response very much, but the Android 11 operating system does have a setting to raise the screen touch sensitivity if that becomes an issue.

ZAGG and Best Buy probably offer the best warranty in the industry, although the screen protector is pricey. I had the Geek Squad install the screen protector, and they did an awesome job.

Product is decent. It does do its job. I had my phone fall on it screen and this saved my phone. Best buy didn’t have one in store so it took a week to get my new one The screen protector doesn’t go to the screens edges.

And the ends are sharps. This makes using full screen gestures incredibly annoying. My new protector ended up breaking again within a day of putting it in. A hair got underneath (and dust collects around the edges, also annoying) and while trying to press the air out it cracked.

I’ve since decided to stop using this brand and have no protector on, and debating putting a different one on that will go to the edges.

Arguably the most expensive screen protector I’ve purchased with, comparatively, the worst quality. Beginnings of a long, vertical crack developed from the bottom middle, where I swipe up from my Pixel 5, after only a day of use.

Other small scratches appearing with no explanation at random location, causing me to worry about overall integrity of the glass. Normally, I purchase the cheap screen protectors available on Amazon and have never had any issues like this.

Sometimes, a higher price doesn’t mean a better quality, it seems.

Title says it all really, didn’t even last 2 days. I lifted it off a table and lost my grip while picking it up, it dropped all of 6 inches back onto the table and the glass literally chipped and shattered.

Super disappointed with this one.

Very easy to install with the supplied items! Super responsive to the touch and easy to clean. Much stronger than my previous brand that cracked.

Zagg has an easy to use template to place around the phones and install the protector. Recommend them over the cheap knockoff types because the first one failed from use, not damage to it.

Fantastic screen protector: I’ve been buying Zagg InvisibleShield Glass phone screen protectors for years, and they have never failed to protect my phone screen. The very first thing I do when I buy a new phone is to also buy a phone case and a Glass screen protector from Zagg, and install both *immediately*! I tend to drop my phone frequently, so an effective screen protector is a must for me.

With this product, when I drop my phone, it’s the screen protector that cracks instead of my phone screen. I also have never changed the screen protector, even after it’s been broken and cracked, and it still effectively protects my phone screen during drops and falls.

I thought about taking off one star for the combined con of it being ludicrously expensive (though it’s definitely worth the money, and I’d much rather pay this price than the $700+ for a replacement phone) and inexplicably inaccurate installation (ha, I swear that alliteration was unintended), but those aren’t important enough to warrant making this a 4-star review; it’s a 5-star product.

The installation is weird though. They tried so hard to make it absolutely fool-proof for a flawless installation, and they went through the trouble of creating hefty pieces of plastic just to make installation easy and perfect.

Yet somehow, no matter how much I cleaned the area and tried in vain to push the bubble out of the screen, one of the corners of the screen had a bubble that simply *would not go away*! Everything else is perfect, the placement is perfect, there’s no bubbles or hairs or anything at all anywhere.

except that bottom right corner. About 5mm of the entire bottom right corner is not adhered to my phone screen, and wouldn’t adhere from the start; this is problematic because I worry that with time, and sooner than later, the screen protector will simply peel itself off.

Considering how expensive this product is, I really don’t want that happening. Anyway, I do highly recommend this product; Zagg’s InvisibleShield Glass screen protectors in general are must-haves, and worth the money!.

I’m not 100% in love with this protector. I tried 2 off Amazon first, LK is what I used for 3 years in my Pixel 3a. It was ok, but had a lift off point at the top flange (they did 2 notches at the top sides) the left side never adhered to my screen but it wasn’t actually used display space.

The LK I ordered for my Pixel 6 had a few small air bubbles I never could get out and the glass held oil from your fingers rendering the fingerprint sensor unusable unless you wiped the screen first.

I threw it away after 3 days. This protector is a premium price 4 times what I paid for the LK. There is 1 tiny lift off spot on the left part of my phone. The lift off is about 1 mm wide and 4mm long on the top left portion of my screen.

It really bothers me since I paid $50 but it’s not causing any other issues so I won’t submit for a replacement for that. I didn’t even realize there was a killer lifetime of you owning the phone replacement warranty.

I picked this protector because you get what you pay for. The reviews I read on Google said this had a beveled edge that was invisible. Lies. It’s no where near as profound as LK, but there is a rainbow reflection on both sides and around the camera cutout.

I preferred LKs camera cut out being a circle just around the camera instead of leaving a gap unprotected at the top. But of course I could see that in the picture before I ordered. This glass protector feels great.

Top quality glass and the fingerprint sensor has still been fairly responsive even without the display settings changed to make it more sensitive. I wish the protector was a little larger. 2mm larger on every side, 1 mm larger on every corner it would still fit inside my OtterBox defender pro series case.

I don’t think you would have the rainbow reflection if it was a bit larger. Grey and black backgrounds don’t cause it but white backgrounds do. The case is edge to edge screen display coverage, with 1mm more than display coverage on the top and 2mm more display coverage on the bottom.

I haven’t contacted the company to see how easily the replacement works but if it’s super convenient and the company is responsive I’d bump this to 5 stars. And I would subtract stars if they make getting the replacement agonizing and ignore messages for weeks on end, then I wouldn’t recommend this I’d recommend saving $40 and getting a 2x or 3x pack from Amazon.

This protector feels more like the Pixel 6 screen than the LK.

I really wanted this product to work since it is quite a bit more expensive than the usual screen protectors. It was fairly easy to install; however, there was an item included that was not mentioned anywhere in the instructions.

Too bad I only figured out what I was supposed to do with it after the fact. At first the protector was great; but then some bubbles started appearing on the sides. No matter what I do I am unable to remove them.

I am a bit upset with my purchase as I could have bought 2 sets of screen protectors (with each having 2 or 3 shields) for the same amount of money that I paid for one shield. I believe I will contact the seller to see if I have any recourse in this matter because I don’t want to be without a screen protector.

If I am unable to get a replacement shield I will be pretty unhappy since I used a $30 Rewards Certificate plus had to make up the difference with cash. Another problem (in my estimation) is that only ONE shield is included so if you muddle up the installation you’re in big trouble.

I got the shield installed without too much trouble because there are tabs at the top and bottom to help get it centered. However, bubbles appeared later and that has allowed dust, etc. to get under the shield.

Right now I am not a happy camper. I intend to take my phone into Best Buy the next time I am in the vicinity to see what, if anything, can be done.

I tried too many alternative screen protectors for my Note 10. All to no miserable avail. With all tempered glass screen protectors I tried, it was simply not possible to operate the under screen fingerprint sensor through the protector.

I tried a liquid gel protector – apply this with no creases, bubbles if you can! About to concede defeat, I tried the Olixar 2in1 protector pack. Hallelujah! Has a super helpful protector holder that fits into the charger port, to align and hold the protector in place, and a protector applicator.

A video is available as visual guideline on method of application. With this accessories, I was able to apply the protector, after some self error in application (watch the video and follow instructions exactly), first protector.

It looks great on phone, all touch operation, including the fingerprint sensor, works without fail. My only slight detraction, hence 4 stars instead of 5, is that it appears the method of application has left a slight line on the protector where it gets folded in half.

This really is however a moot point as it is really not visible when using the phone. You would need to look for it when the screen is black, in standby. I would definitely recommend this protector. It was a cavalry to the rescue product for me.

It works, no bubbles or visual hindrances to speak of, feels good to the touch, fits perfectly, allows screen clarity, and is very good cost value.

This is a lovely product. Application easy, felt gorgeous to the touch, assume offered good protection but. Bought for a Samsung Galaxy Note 10 , with under screen fingerprint sensor and sensor would not not work through it.

Tried deleting fingerprint entered and introducing anew but no, sensor point through protector could not recognise my fingerprint, exhorting me to press harder! (which I did incidentally but to no avail).

So, lovely, but in my case, not for my phone.

For 17 dollars, ehh pretty overpriced for the quality here but it works I guess. The privacy screen also works as well even on full brightness you can’t really see any text messages if anybody were trying to look, although photos are a bit visible or for example your wallpaper would be on full brightness but on mid to low bright it wouldn’t same goes for text messages or reading something off of an article.

Had this for about 2 weeks, wanted to review this screen after some use instead of saying “it’s amazing” when first time using it because that’s a pointless review. But here are some of the good things about This screen.

Well for one it does have like this kit to help you apply the screen protector perfectly, still it wasn’t a bubble free application and I had to reapply it about 2 times for it to be bubble free, I always start from the bottom then the top end instead of just applying it flat if you know what I mean.

After 2 weeks of use screen already has some scratches from coins to keys being in my pocket, but scratches aren’t that deep. Drop my phone a few times on accident now but I also do have a case on my iPhone so depending on some users might get different results.

The screen protector is very clear, while some other screens with the privacy film would have like this grainy look which I had a screen protector once and it bad to the point I just took it off and threw it away, but this screen protector with the privacy film it’s actually not that bad.

It’s definitely not finger print proof as stated in the description. One MAJOR issue is touch screen response. I’ve had issues sometimes when trying to type some of the keys would not register, or just using the screen in general, you basically have to touch or tap the screen with a bit more pressure, which I am getting use to already, but it is still and issue for me till this day.

Besides that it’s a decent screen protector, but 17 bucks is quite a lot for this type of quality tbh, but still decent. Will update if anything else happens, thanks for reading.