20 Best Spray Paint For Car Interior Plastic (2023 Updated)

Took my money an supplied me with nothing. It’s coming up to a year ago that I ordered this part. It never arrived and despite promising a replacement in never arrived. I have made several phone calls over the time and there was always a promise to call me back.

This has never happened. I’ve sourced the part from somewhere else now. The feeling of being ripped off remains.

Instead of having a lid, this bottle came with a ring between the spray can and the tip that needed to be removed to use the product. The tip could not be fully attached to the spray can once the ring was removed so pushing down just meant the top of the can overflowed with primer and then dripped onto things.

I managed to drip some onto the plastic I had been planning to spray paint and the paint did seem to stick to that area slightly better than other un-primed areas. I’m not sure if this was a one-off fluke or a design flaw but I’d be hesitant to buy this product having had such a bad experience with this can.

I just finished my counter top with black granitic and I love the way they came out. I was easy to use. But I used a primer first and I did it in two days to allow good dying time. They came out very pretty.

I am in the process in of a whole kitchen remodel and the counter top were the first thing I did. The cabinet will be a medium grey and the walls will be a light grey. So, the black granitic counter top pulls it all together and I just love the way they came out and it was so easy to use.

Thanks for a great and easy product. :).

I’ve been using Eagle One “ID” going on 5 years now, every since I discovered it. I will not use anything else period. Spray on your interior Dash, interior door panels, glove box, anything interior, also like to spray it on my seats as well.

It’s got an awesome smell. I also use it all the black trim on the exterior of my truck as well as the bumpers. The last thing and one of my favorite things to use it on is my dual sport motorcycle. Just wash the bike first, then spray the Eagle One “ID” on all your plastics making sure to spray a light coat evenly over them, and then just let it sit.

It takes about an hour or so but what your is a super shiny motorcycle that just rolled off the showroom floor.

This product worked great in my Blacked out and red trim Jeep Grand Cherokee. Makes the dash and doors look new. Sprayed it onlet it penetrate a couple of mins and wiped it off. When it dried it left a nice sheen and lasts a long time.

Ill definitely order again.

I used this stuff for the first time on the engine bay. I wouldn’t recommend using on the interior though. It’s petroleum based. I did buy the trim shine in the spray bottle and used it on the interior.

It’s water based and won’t damage anything and it has UV protection in it. You can use the water based formula on the outside trim but it will wash off immediately in the rain or carwash. I posted some photos.

I used it on a 2011 Impala and a 2017 civic. I forgot to take some before photos but the civic was filthier than the impala. They both turned out spectacular.

I have been using this product for years. It is the best thing I have found for restoring factory black color to rubber bumpers, wheel well inner fenders, front and rear fasicas, and running boards. Do you want to spend hours cleaning the grooved pattern on running boards with a toothbrush or do you want to take five minutes to spray something that cleans out the smallest openings? As others have said, it is great for engine compartments, rubber hoses, air box tubes, and so on.

Also get yourself some More Shine and spruce up your tires!.

I have been using it for over 30 years. Has always been reliable and bright white.

First RC model, and the Tamiya spray paint is lovely stuff – just remember, several very light coats!

I purchased this product because it was recommended on a auto detailing video. Meguiar’s Natural Shine Protectant will certainly bring back the original finish to black and grey colored plastic moldings, trim, dashboards, and panels.

Best use is with detail brushes after deep cleaning the surface first. My 2011 Tahoe looks new again and without a greasy residue after applying the protectant. Also, I used it on my engine detail and it was equally impressive in restoring a new finish to the plastics and rubber.

I am impressed!.

I tried this Meguires Natural shine on my dashboard of my 2016 Honda HRV. I first sprayed it on my dashboard after using Mothers VRL spray. This left really bad white rings everywhere, I was looking for a slightly more matte look.

This product did not work after using Mothers on it at all. I then tried it on my bumper that had some peeling, rough bumpy texture,looked like it had some peeling issues as well. I live in Arizona so it took a toll on the plastic bumper.

I sprayed Meguires it on it, did nothing to restore the color, texture or reduce roughness. I then sprayed Mothers VRL cleaner conditioner all over the bumper it worked really well to restore color, cleaned it and regained nice texture, not completely but was 80% better.

Wouldn’t recommend Meguires for severely damaged or on car a dashbord already sprayed with Mothers VLR.

My daughter picked out some wooden letters from Michael’s to spell her daughter’s name and ask me if I could spray paint them for her. So I purchase this to spray paint and when I tell you that I am super please with the outcome! After the letters dried they look so smooth and silky I actually went back to Michael’s to purchase more letters for my other Granddaughter I can’t wait to paint her name as well.

I have purchased the brand of spray paint for my canvas painting their gloss spray paint! I will note that I did this in my garage and I used a face mask for the fumes and left the letters in there a few days it was great the weather back here is in the 20’s and my garage is probably colder than that.

This product worked fine. The color was good, but the coverage was thin. The spray nozzle worked consistently but did clog and spew. The lid was very hard to open. Probably will not use again or if I do I will choose a smaller project, like a frame, verses a piece of furniture, which is what I was painting for this project.

I was looking for a dash restorer product and given the reviews when this came on sale, I grabbed a bottle for the dash and door trims on my 2002 BA Falcon. Unfortunately though I’m going to go against the flow here by saying that I’m not that impressed.

Did it make an improvement? Sure, a bit. Would I call it a “restorer” and did it give me the look I thought I was going to get. No I’m sorry, not by a long mark. TBH I’m a bit over Maguires stuff generally because the headlight polish only lasted six months also.

Maybe its one of those cases where their products used to be good but not so much now.

Great purchase, used on the hard plastic surfaces on the doors, console, chairs and dash. 1 application really does make the car start to look brand new. It goes on easily leaving a slight greasy coating, but not as slippery as amour all.

3 weeks later it looks like I only applied it yesterday. The cream allows you to control how much is applied. it’s so much better than spray products. I detailed my dads car with it and he said he will be using it on every other car from now on.

Small con: I found that if you apply it on scratches in the hard plastic it makes the scratches a little more visible- but I think as it dries you don’t notice it anymore (but scratch is still visible).

I ordered the Tamiya PS-31 Smoke Spray Paint. From what I had read this was the answer for tinting windows on model cars. It didn’t work to my expectations. Maybe I didn’t do it right. Maybe I wasn’t expecting what I should have.

I expected it to tint the windows in the same way that the cap on the paint can is tinted, in the same manner as clear colored cellophane, making them darker but totally transparent. Instead it is like a paint dusting that fogs the windows, obscuring the interior, making it difficult to impossible to see through it to the passenger cabin of the model.

I’m disappointed but I can overcome disappointments. It’s still better than anything I tried to come up with. I purchased from Mid-America Raceway. I’ll give them 5 stars.

Very easy to apply and dries quickly, nice finish as well. Remember to apply multiple times on small increments allowing a few minutes between applications. Great product at a decent price

So I applied 2 thin coats to my windows after finishing my main body, let it dry for about an hr and I could still barely see any difference so gave it a magic third coat and boom. ended up too dark! Moral of the story is that it does work, and looks really good but I think it just needs a little time to dry properly before the tint sets in.

Great coveragehowever the color in the lid did NOT match the paint. I ordered mica red and I got a more bright orange ish color. Be carful while choosing your colors.

An excellent product used on car model. Sprayed perfectly and finished coat required no further polishing. Looked like glass. Have had etching in problems on certain plastics so recommend testing first on relevant sprue to ascertain compatibility.

Otherwise an excellent product.

Building a 1967 chevy chevelle and was going to paint the interior red but changed my mind, keeping it white and blue to match the blue body which was painted with the same brand paint in a spray can which turned out real great thank u for these wonderful paints but HOBBY PEOPLE at the valley center store tells customers to go F–K themselves? not good for customers to be told? got better results here! The paint is good quality but the workers are filty mouthed idiots they have no respect for customers non at all but it would figure when you can tell their kind!.

I used this to paint a milling machine. While these machines don’t get the weather that a car does, they are exposed to grease and solvents and this paint holds up well. I’ve used other colors of this AE on other machine tools as well as a truck bed and I’m very happy with the performance.

This is a nice light blue color as well. I’ve used around 8 or 9 quarts of different colors as well as a gallon of white. I shoot this over the grey epoxy primer they sell here. I’ve only had one color that didn’t cover very well, a tan, so if you’re getting something in a light tan you might want to buy extra.

Overall I would recommend this. On a more general note, I’ve been told that acrylic enamel holds up well in the desert environment, if that helps anyone.

I haven’t shot this particular can yet, but I have used several other colors out of this line. I have mostly used these to paint machinery such as milling machines and lathes, but also a truck bed. Overall they spray well and hold up well both to weather on the truck bed and solvents and chips on the machinery.

The only detraction I would say is that it’s difficult to tell what color you are getting based on what you see on your screen when you order. This particular paint was a bit darker than I expected, for example.

I think these would be great for painting a car, so long as you are not trying to match a factory color and you aren’t worried about the paint being a bit different than what you expect from the computer.

Also, quite a good value. I usually shoot this over the epoxy primer they sell here.

Easy paint to mix and use. Used it on a fiberglass topper that was white. Sanded it and used TCP’s primer/sealer before paint. Color was a very close match to my truck. I have orange peel that I am currently trying to work out, but that’s my fault.

This is the first time I have used a paint gun (HVLP). I practiced several time with it spraying water and thought I had the process down pretty good. Must not have had the gun set just right, or, should have ordered the slow reducer for higher temps.

I called/emailed customer service several times with questions and they were extremely helpful. Thank you for that!!.

I had red about the issue with this paint then forgot about it and ordered anyway. This paint doesn’t cover well you will need about 5 light coat and more to achieve a good coverage on a flat surface.

You may never be able to get any coverage on edges and intersections even with more coats. You cannot apply heavy coats as it will run and make streaks. It is pretty much like applying milk, it looks white at application but then runs off.

A light color primer might help, but I’m sure there are other whote paint that perform better. Never had a problem with any other colors from Tamiya, but this particular is bad.

This review is shared with Tamiya lacquer metal primer purchased at the same time. Good product. Lovely glossy finish on metal and composite materials I use. Dries fast (5 minutes). Gentle spray makes it easy to apply light coats.

I’ve only used this once so far but it did a great job. I used it to clean and protect a new spa (hot tub) cover and the cover looked so good afterwards! A little goes a long way, so this bottle will last me a long time.

Not sure how well it actually protects or how often I’ll have to use it, but it seems like a really good product. Now I want to find other stuff to use it on!.

I recently started experimenting with Montana Spray Paints in my mixed media projects and have been pleasantly surprised with the results. The biggest advantage to using Montana is the wide range of colors and effects available.

Price is a big consideration, as well. You can stock a solid palette without breaking the bank, and the 11-ounce (400 ml) cans give you plenty of paint to work with. I highly recommend Montana spray paints for both professionals and beginners! #sweepstakes.

I used this to paint bumper hooks on my daughter’s Jeep. She wanted a very specific color and after many attempts I finally found and used this spray paint which was perfect. It had tone of silver and teal making a metallic teal look incredible! Very happy with the application and final outcome!.

The product itself is relatively good, but the manner in which the warehouse ships them is ludicrous. The spray bottles do not have lids and boxes are about 2 inches longer than the bottles themselves.

This allows for the nozzles to break in transit from being thrown around. I ordered four different cans, three of which had broken nozzle stems rendering the cans useless. The shipping is also incredibly slow! I would avoid purchasing these items from a vendor that does adequately protect them during shipping.

The one good nozzle did spurt paint quite a bit despite shaking for several minutes. I could never get the can to cleanly spray without globs of paint ejecting.

The quality of the paint itself is really good. I used this on to custom ps5 controller. But make no mistake, the image on the website and description says and looks blue- but it is in fact purple. Personally I would have preferred it to be blue but still ok with purple.

If I knew how it would have turned out, I would have opted for another colour.

I work in the toy industry and spend a lot of time painting prototypes. Gold is notoriously difficult to work with in water base form. I use the shortcuts gold leaf as a base color and tint as needed with an overspray.

The Chrome is essentially silver. They go on in nearly one coat, dry nicely, and look great. As for the other colors, I’ve never used them, but I know that the plastic cap color never matches the actual paint.

Here are some tips for anyone who is interested. Primer the surface white first if you want the colors to be brightest, spraying on dark surfaces causes the color to dull. Sand the surfaces of smooth/glossy objects before painting them.

The paint will adhere better and is less likely to chip off. Don’t spray too much on the first pass. Spraying too much at once will case drips, do a pass, let it dry and do a second coat. Don’t hold down the nozzle the entire time, spray in short bursts (and not too close), this helps you disribute paint evenly and avoid drips.

Happy painting!.

Krylon short cuts is perfect for small projects. I use it to prep pens. I am also very surprised at how long it has lasted. It puts out even coating and dries quickly with no running, (as long as you coat evenly).

I enjoy the small can making it perfect if you’re not sure if you’d like it or not. Call it a sample can.

The can was smaller than I expected but that only added on to how surprised I was when I bought it. It’s small but compact and it doesn’t take away from how beautiful the gold finish looks! I used it for a set of cabinet knobs and they turned out absolutely beautiful! It’s definitely worth the money.