20 Best Spark Plug Wires For 5.7 Vortec (2023 Updated)

MSD 8. 5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per footbut with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft.

of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference “choke.

” This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8. 5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.

Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD’s 8. 5mm Super Conductor wire sets are available in custom or universal-fit applications.

AFTER MARKET HIGH PREMIUM QUALITY, A LITTLE LONGER THAN OEM WIRE 10. 5mm Spiral Wound Design Ultra High Strength/High Temp. Silicone Boots and Sleeve Ready for Install Straight out of the box Please make sure to check fitment below!!.

Engineered from the inside out, the 8. 5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire.

Black super conductor 8. 5 mm LS1 conversion. Features for the MSD ignition P/N 32823 custom spark plug Wire set. Resistance less than 50 Ohms/ft. For superior spark extra heavy glass braid. Strong dielectric insulator helically wound copper alloy conductor.

40′ Of conductor wound in one foot Of wire. 8. 5mm jacket protects from high heat or abrasion. Silicone and synthetic heat resistant boot. Ferro-magnetic impregnated core creates emi. Choke core made with Dupont kevlar to add tensile strength.

MSD 8. 5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per footbut with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft.

of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference “choke.

” This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8. 5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.

Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD’s 8. 5mm Super Conductor wire sets are available in custom or universal-fit applications.

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Size: height: 9. 00″ width: 7. 00″ length: 3. 50″.

The MSD 8. 5mm Super Conductor Wire is “the” performance wire. Engineered from the inside out, the 8. 5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire.

The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire.

This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle.

The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

The MSD 8. 5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

ACDelco Professional Spark Plug Wire Sets are engineered with strength enhancing fiberglass and high temperature silicone insulators. These spark plug wires are a premium aftermarket offering that covers over 96% of domestic vehicles on the road today.

Parts offered for GM, Chrysler, Ford, Honda, Nissan, and Toyota vehicles. ACDelco Professional Spark Plug Wire Sets are designed to match the fit, form, and function found on new vehicles.

MSD 8. 5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per footbut with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft.

of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference “choke.

” This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8. 5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.

Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD’s 8. 5mm Super Conductor wire sets are available in custom or universal-fit applications.

ACDelco Professional Spark Plug Wire Sets are engineered with strength enhancing fiberglass and high temperature silicone insulators. These spark plug wires are a premium aftermarket offering that covers over 96% of domestic vehicles on the road today.

Parts offered for GM, Chrysler, Ford, Honda, Nissan, and Toyota vehicles. ACDelco Professional Spark Plug Wire Sets are designed to match the fit, form, and function found on new vehicles. Designed to be an ideal replacement for your vehicles worn equipment, ACDelco Professional, premium aftermarket Auto Wire and Auto Cable products are built to meet nearly every application and budget.

Many battery cable sets feature copper alloy terminals and factory crimping for outstanding performance. Select wire sets have high efficiency conductive silicone, metallic silicone, or magnetic suppression cores.

ACDelco Wires and Cables include high-quality spark plug wire sets, battery cables, pigtail connectors, lamp sockets and trailer connectors. 8″ L x 10″ W x 6″ H.

The MSD 8. 5mm Super Conductor Wire is “the” performance wire. Engineered from the inside out, the 8. 5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire.

The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire.

This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle.

The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

The MSD 8. 5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

ACDelco Professional Spark Plug Wire Sets are engineered with strength enhancing fiberglass and high temperature silicone insulators. These spark plug wires are a premium aftermarket offering that covers over 96% of domestic vehicles on the road today.

Parts offered for GM, Chrysler, Ford, Honda, Nissan, and Toyota vehicles. ACDelco Professional Spark Plug Wire Sets are designed to match the fit, form, and function found on new vehicles.

MSD 8. 5 mm Race Tailored Super Conductor Wire Sets are designed to specifically fit race engines equipped with headers or MSD distributors. They feature wires that are custom cut to route behind the block, under the headers, and to the spark plugs.

This routing gives the engine an extra clean appearance as well as protecting the wires from making contact with the engine. The wires have a special helically-wound core that has just 40-50 ohms of resistance per foot–but with the RFI suppression equal to a 1,500 ohm wire.

In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8. 5 mm synthetic/silicone jacket over an extra heavy glass braid and dielectric insulator keeps the current guided to the plugs.

Underneath the high-temperature boots, stainless steel terminals feature snap locks to assure a secure fit.

GM Original Equipment Spark Plug Wire Set (748RR) by ACDelco. Built to match the Original Equipment in length and fit, ACDelco Professional Ignition Wire Sets also offer a performance advantage over many aftermarket products.

MSD 8. 5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per footbut with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft.

of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference “choke.

” This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8. 5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.

Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD’s 8. 5mm Super Conductor wire sets are available in custom or universal-fit applications.

Built to match the Original Equipment in length and fit, ACDelco Professional Ignition Wire Sets also offer a performance advantage over many aftermarket products. The company does its utmost to provide the best possible solutions for your needs.

All products by ACDelco are made with expert care and created by professionals to meet all your requirements. The company does not accept compromises when it is going about quality, so you can be sure that all products have only first-rate quality.

With many years of manufacturing experience, ACDelco is the name you can trust.

Built to match the Original Equipment in length and fit, ACDelco Professional Ignition Wire Sets also offer a performance advantage over many aftermarket products. ACDelco is here with excellent products that are available at a competitive price.

The company does its utmost to provide the best possible solutions for your needs. All products by ACDelco are made with expert care and created by professionals to meet all your requirements. The company does not accept compromises when it is going about quality, so you can be sure that all products have only first-rate quality.

With many years of manufacturing experience, ACDelco is the name you can trust.

MSD 8. 5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per footbut with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft.

of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference “choke.

” This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8. 5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.

Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD’s 8. 5mm Super Conductor wire sets are available in custom or universal-fit applications.

Racers never stop experimenting as they search for every way to wring out more power or handling performance to to gain an edge over the competition. Over the course of 40-plus years, MSD Performance has been driving the development of innovative components that helped shape the way our cars race and perform.

From super speedways to road courses, land speed racing to top fuel dragsters, and of course your traditional hot rod, MSD has provided the components to fire nearly anything in motorsports. Early on, MSD focused squarely on ignition systems with revolutionary products like the multiple sparking CD ignition, timing and rev controls, billet aluminum distributors and the Pro-Mag, an incredible breakthrough in power and endurance.

Today MSD is developing electronics for your entire powertrain. The Atomic EFI systems for the LS engine platform and throttle body are now complemented with a transmission controller. Our DynaForce Starters and Alternators ensure that your engine cranks over to fire up and the Alternators keep it charged.

MSD is poised to deliver components that work and communicate together to provide performance and value.

Their multi-layer construction and industry-leading, spiral-wound conductors provide maximum voltage transfer, regardless of your coil type. Extra-strong high-grade copper/stainless steel terminals. Superior EMI/RFI suppression technology.

40 ohm ultra-low resistance. Extra-thick-walled German-made silicon boots and jacket (600 degrees F-rated). Silicon or ceramic boot options. Available boot angles include: 90, 135, and 180 degrees. PentaCore alloy conductor technology.

Military-grade aramid fiber core support. Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is perfectly crimped and assembled for strength and perfect fitment for life.

Designed for off-road use only.