Best Shocks For Traxxas Rustler 4X4 Vxl (2024 Updated)

Upgrade your 1/10 Traxxas Rustler 4X4 VXL, Slash 4X4, Slash 4X4 LCG, or Hoss 4X4 VXL with this high-quality shock absorber. Made from lightweight, high-tensile-strength aluminum 6061T6, it offers great strength and durability. The shock shaft is thickened to 4mm and smoothly polished to provide higher durability, while high-concentration suspension oil is used for better cushioning force.

This shock absorber comes with different spring coils, including silver 1.5mm, orange 1.6mm, and gold 1.7mm, allowing you to choose the one that best suits your needs. The L-shape piggyback reservoir extends the oil travel, improving the drive's smoothness and overall performance.

Please note that the L-shape piggyback must face the inside of the vehicle to prevent hitting the shell. Additionally, white Delrin washers are to be placed outside of the metal ball. This shock absorber comes with gold spring-2pcs, silver spring-2pcs, stainless steel round head screw 3×14-2pcs, stainless steel round head screw 3×16-2pcs, 5.8×7.4 metal ball-2pcs, and white Delrin washer-2pcs.

This shock absorber is an upgrade from the original stock part number 8361 + 1664 + 3765A + 6864. It is easy to install and will fit your 1/10 Traxxas Rustler 4X4 VXL (67076-4), Slash 4X4, Slash 4X4 LCG (68086-21), Hoss 4X4 VXL (90076-4) perfectly. Upgrade your RC vehicle today with this high-quality shock absorber.

Upgrade the performance of your Traxxas Slash, Stampede, Rustler, or Hoss with these compatible front and rear big bore shocks and drive shafts. These upgrades offer incredible durability and near frictionless operation for ultra-smooth damping and long-lasting performance. The shocks are also compatible with 1/10 scale Traxxas 2WD models. The drive shafts are made of high-quality materials to ensure high reliability, good compatibility, and long durability. The upgrades are easy to assemble and replace the original parts with high precision and strength.

If you are not completely satisfied with the product, you can contact the seller for a refund or exchange. The seller is committed to providing the best products and customer service to ensure customer satisfaction.

Upgrade your 1/10 Traxxas Rustler 4X4 VXL, Slash 4X4, Slash 4X4 LCG, or Hoss 4X4 VXL with this high-quality aluminum shock absorber set. Made from lightweight and durable aluminum 6061T6, these shocks are built to last. The shock shaft is thickened to 4mm and polished for higher durability. The L-shape piggyback reservoir extends the travel of the oil for smoother drives and better performance.

These shocks come with high concentration suspension oil for better cushioning force. You can choose from different spring coils, including Silver 1.5mm, Orange 1.6mm, and Gold 1.7mm, to customize your driving experience. The set includes Gold Spring-2pcs, Silver Spring-2pcs, Stainless Steel Round Head Screw 3×14-2pcs, Stainless Steel Round Head Screw 3×16-2pcs, 5.8×7.4 Metal Ball-2pcs, and White Delrin Washer-2pcs. Note that the White Delrin washers are to be placed outside of the metal ball.

Upgrade your RC car's performance and durability with this high-quality shock absorber set. The original stock part number is 8361 + 2656 + 6867 + 3766A.

The high-quality light-weight aluminum 6061T6 material used in the construction of this shock absorber ensures great strength and durability. The shock shaft is thickened to 4mm and smoothly polished to achieve higher durability. The L-shape piggyback reservoir extends the travel of the oil, helping to smooth out the drive with better performance. This shock absorber is made to fit 1/10 Traxxas Rustler 4X4 VXL (67076-4), Slash 4X4, Slash 4X4 LCG (68086-21), Hoss 4X4 VXL (90076-4) models.

This shock absorber uses high concentration suspension oil that provides better cushioning force. It comes with different spring coils – Silver 1.5mm, Orange 1.6mm, Gold 1.7mm. The accessories included in the package are Gold Spring-2pcs, Silver Spring-2pcs, Stainless Steel Round Head Screw 3×14-2pcs, Stainless Steel Round Head Screw 3×16-2pcs, 5.8×7.4 Metal Ball-2pcs, White Delrin Washer-2pcs. The white Delrin washers are to be placed outside of the metal ball. The original stock part number for this product is 8361 + 1664 + 3765A + 6864.

Please note that the L-shape piggyback must face the inside of the vehicle to prevent hitting the shell. This shock absorber is a great choice for those looking for a durable and high-performing product.

The 1/10 Traxxas Rustler 4X4 VXL, Slash 4X4, Slash 4X4 LCG, and Hoss 4X4 VXL can now be equipped with this high-quality shock absorber set. Made from lightweight and durable aluminum 6061T6, these shocks have superior strength and durability. The shock shaft has been polished smoothly and thickened to 4mm to ensure greater durability. These shocks also use high concentration suspension oil to provide better cushioning force and achieve better performance.

The L-shape piggyback reservoir allows for the oil to travel further, leading to a smoother drive. Additionally, this shock absorber set comes with different spring coils to choose from, including Silver 1.5mm, Orange 1.6mm, and Gold 1.7mm. The set also includes helpful accessories such as Gold Spring-2pcs, Silver Spring-2pcs, Stainless Steel Round Head Screw 3×14-2pcs, Stainless Steel Round Head Screw 3×16-2pcs, 5.8×7.4 Metal Ball-2pcs, and White Delrin Washer-2pcs. Please note that the White Delrin washers should be placed outside of the metal ball.

The original stock part number for this shock absorber set is 8361 + 2656 + 6867 + 3766A. Upgrade your Traxxas Rustler 4X4 VXL, Slash 4X4, Slash 4X4 LCG, or Hoss 4X4 VXL with this high-quality shock absorber set and experience superior performance and durability.

The Shock Absorber Lowering Kit is a great upgrade for 1/10 Traxxas Rustler 4X4 VXL, Slash 4X4, Slash 4X4 LCG, and Slash 2WD. It is designed to lower the car's height with a minimum setting of 6mm from the ground. The shock length is shorter than the original (F: 75mm / R: 80mm) to achieve a lower center of gravity for more high-speed driving on flat surface roads. The shock shaft is thicker than the original for greater durability, and the spring coil diameter is 2.6mm.

The combo includes an extra set of 2.2mm spring coils for more powerful and stable use. The CVD shafts are made of Harden Steel #45 combined with aluminum 6061T6 body for more sturdiness and lightweight. The spring steel hex widener adds 3mm on each side of the wheel (+6mm in total), which increases vehicle stability. Rubber tires provide more precise wheel travel direction.

Please note that when used in SLASH models, the lower body height may cause the car shell to fall down and hit the tires. To prevent this, the provided aluminum collars should be placed between the body post and the shock mount to support the car shell. Different size collars can be used for different adjustment of the shock angle. When the body is at the highest, use front 8mm with rear 12mm collars. When the body is at the lowest, use front 12mm with rear 16mm collars.

The package includes 2 Front Wheels, 2 Rear Wheels, 2 Front CVDs, 2 Rear CVDs, 4 Spring Steel Hex, 2 Front Shocks, 2 Rear Shocks, 2 Short Springs, 2 Long Springs, 4 Stainless Steel Round Head Screws (3×14), 6 Stainless Steel Round Head Screws (3×16), 4 Stainless Steel Round Head Screws (3×20), 2 Stainless Steel Round Head Screws (3×25), 4 Aluminum Collars (3x6x2.5), 2 Aluminum Collars (3x6x8), 4 Aluminum Collars (3x6x12), 2 Aluminum Collars (3x6x16), 4 3mm Collars, 4 3mm Washers, 4 Screw Pin M4x2.5×12, 4 4×2.5 Silicone O-Rings, and 4 3×3 Screw Shafts.

Upgrade your Traxxas Rustler or Slash models with the Shock Absorber Lowering Kit for a lower center of gravity and increased stability on flat surface roads.

Upgrade your 1/10 Traxxas model with the full aluminum 5862 RC Shocks. This all-inclusive kit contains 4pcs of big bore front and rear shock absorbers that can handle even the toughest terrain with their silky-smooth damping performance. The kit also includes 90mm front shocks, 100mm rear shocks, ride height spacers, balls and hex hub screws for easy installation. The shocks are a replacement for #5862 and suitable for a wide range of models such as the Rustler 4X4 VXL, Slash 4X4 Platinum, and Stampede VXL.

The shocks are made of lightweight aluminum alloy, which is CNC machined and hard-anodized for durability and improved performance. The material does not flex as much as plastic, even under stress or high temperatures. The shocks also feature adjustable threaded shock collars that provide scale realism and added spring adjustability. The kit comes with a small amount of pre-filled oil, and you can add more according to your needs.

With over 15 years of experience in developing high-quality RC parts, RCAWD is committed to providing excellent customer service. If you have any questions or concerns, their friendly team is always ready to help you out.

Upgrade the suspension system of your 1/10 Traxxas Slash 4×4 4wd/Slash 4×4 4wd VXL, Stampede 4×4 4wd/Stampede 4×4 4wd VXL, Rustler 4×4 4wd/Rustler 4×4 4wd VXL, and Hoss 4X4 4wd VXL with this high-quality shock and suspension arm upgrade kit. The kit includes two front and two rear big bore shocks that offer incredible durability and near frictionless operation for ultra-smooth damping and long-lasting performance. The precision CNC machined, anodized 6061-T6 aluminum front and rear suspension arms are more durable than the original arms, providing high protection and long durability.

This upgrade kit comes with screws for easy installation, making the process hassle-free. With this upgrade, you can ensure high reliability and good compatibility for your RC car. Improve your driving experience and enjoy a smoother ride with this high-performance upgrade kit.

If you're not satisfied with the product, you can contact the seller to request a refund or exchange. Customer satisfaction is their main priority.

Upgrade your 1/10 Traxxas Slash 4×4, Stampede 4×4, Rustler 4X4 VXL, Rally 4X4, Hoss 4×4 VXL, and other compatible models with these high-quality shock absorbers. This pack includes two alloy front shock absorbers, measuring approximately 100mm in total length, and two alloy rear shock absorbers, measuring approximately 115mm in total length, along with screws for installation. These shocks are designed to replace the stock model part# 5862 and are CNC machined for precision, making them heavy-duty and perfect for big jumps.

It is important to note that these shocks do not come pre-oiled, so make sure to get some before installing them. With their durable construction and precision engineering, these shocks are a great choice for anyone looking to upgrade their RC vehicle's suspension system.

Upgrade your 1/10 Traxxas Rustler 4X4 VXL or Hoss 4X4 VXL with this high-quality Aluminum Rear Shock Tower. Made from lightweight and high-tensile strength aluminum 6061T6, this shock tower offers great strength and durability during extreme RC action. The modern 3D streamline design made by CNC machine provides a strong visual impact.

With multiple positioning holes available, adjusting the shock angle to suit different driving conditions is a breeze. The set includes stainless steel round head screws of varying lengths for easy installation. The original stock part number for this product is 6738.

Upgrade your RC vehicle with this Aluminum Rear Shock Tower for improved performance and durability.