When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.
Saltillo tile is a type of terra cotta tile that is made in Mexico. It is usually made from red clay, but it can also be made from white, yellow, or pink clay. Saltillo tile is usually glazed, but it can also be left unglazed.
Sealer is used on saltillo tile to protect it from stains and to make it easier to clean.
20 Best Sealer For Saltillo Tile
Product Image
Product Name
Features
Price
Zep Commercial Stain Resistant Floor Sealer – 1 gal bottle
It protects most types of interior floors against common food and drink stains, petroleum and asphalt. The sealant works well as a base coat for a floor finish and it goes on clear.
Miracle Sealants 511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapour release.
511 Porous Plus does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Porous tile and porous stone surfaces treated become harder and less slippery.
511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. 511 Porous Plus forms an invisible barrier that is resistant to moisture and stains while allowing vapour to escape.
511 Porous Plus is not a surface coating and will not alter the natural look. All surfaces are harder and less slippery.
Provides one step beauty treatment, interior and exterior stone and masonry surfaces. Seals and protects stone and masonry surfaces. Special acrylic urethane formula is unsurpassed for protection and durability.
Detergent, scuff stain and water resistant. Water based, low odor, fast drying, will not discolor. Maintains natural look of stone and masonry surfaces. Great for unglazed mexican, saltillo, quarry tile, slate terrazzo, brick, grout, porous marble, concrete and stone floors.
This water based product, will color enhance your stone surface and will increase the longevity while protecting them from the UV’s and creating easier cleaning maintenance.
AQUA-X Grout Sealer is designed for use by professional contractors and DIYers who demand excellent products with high performance. AQUA-X Grout Sealer is a clear, water-based, penetrating silicone water repellent sealer that provides a moisture resistant barrier on grout surfaces.
You can also use the product to seal unfinished, unglazed tile.
I’m not sure who thought using white grout on a bathroom floor would be a good idea but they did, and by the time I moved in, it was filthy. I purchased Aqua-X to clean it and. WOW! It worked fabulously! I was able to restore the grout to pristine white then added a sealant to keep it clean.
I asked for a gloss finish for the shower floor and was told to use the grout sealer. The finish is very flat. Seems to repel water well but not the look I wanted. Disappointed
We built a new house & sealed all floor & shower grout. I got this product for the showers. So far so good! For easier application, I poured the product into a bottle made for applying sealer. It worked great.
The product shields water *********** by beading up & rolling off. Showers look brand new after a month of use. I’d give a 4. 5 to this product only because we transferred to a different bottle for easier application.
Miracle 511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement.
511 Seal & Enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile and grout surfaces. 511 Seal & Enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces.
In addition, 511 Seal & Enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant.
After researching for a while, I came across this sealer at a local store. I wanted to have a wet but non shine look on my flagstone. The local store had it very expensive, so I tried the product and it did what I was looking for: Enhance the color of my flag stone, and give it a wet non shine look, and the results were spectacular.
I really loved the way my flagstone patio looks now. I don’t know at this point if it will turn white after or how long the result will last but definitely I would recommend this product for natural stone to enhance the color and seal your flooring.
Since 1935, Trewax has been a leading provider of surface protection and restoration products. More than 80 years later, Trewax continues to be the brand trusted by consumers and industry professionals around the world.
Trewax Professional Tile and Stone Indoor and Outdoor Sealer Finish provides a one-step beauty treatment for interior and exterior stone and masonry surfaces. The special acrylic urethane formula seals and protects making surfaces scuff, stain and water resistant.
Great for unglazed Mexican saltillo, quarry tile, slate, brick, grout, porous marble, concrete and stone floors. The acrylic urethane finish provides excellent protection and durability. This water-base sealer is fast drying and has little odor.
Foundation Armor The Armour SX5000 is a Department of Transportation approved penetrating water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%.
The Armour SX5000 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or colour of the substrate, and won’t leave a surface film.
By reducing surface water absorption, cracking, spalling, pitting, mould, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.
For commercial and residential tile and stone installations. Reduces crack transmission in ceramic tile or stone floors. Bonds directly to metal drains, PVC, stainless steel and ABS drain assemblies.
Can also be used as a slab-on-grade moisture barrier under resilient flooring. Meets ANSI A118. 10 for waterproofing membranes and ANSI A118. 12 for crack isolation membranes. Meets Uniform Plumbing Code specifications for use as a shower pan liner.
As a crack prevention covers about 110 sq. ft. at 30 mil thickness when wet per gallon. As a waterproof membrane, covers about 35 to 40 sq. ft. at 93 mil thickness when wet, 47 mils. dry.
Used Red Gard on my bathroom room and followed the instructions, and within a week it peeled off anywhere their was thin set. It peeled off in some spots up to a 4 inch piece. Luckily I didn’t tile yet.
Not using it ever again. Google “Red Gard fail” if you want to us it to figure out what not to do or extra ideas to make sure how to make sure it bonds. Waste of time and money.
Does what it says on the tin. It’s very thick so you’ll need more than you think, especially with 3 coats over all your seams. I needed two buckets to get through a single tub to shower conversion. When applying the fabric tape, opt to do as small a section as possible, or you’ll find you’ll get too far ahead of yourself trying to get the tape sitting right and catching up to your initial coat.
Definitely use gloves, and whatever scissors you plan to use to cut the tape will get covered in the stuff, unless you cut it all before hand. Buy cheap paint brushes and just throw them out when you are done a coat.
Rock Doctor granite countertop sealer helps to maintain the natural look of stone. Stone tile maintenance dictates that stone should be resealed every 12 -18 months. This granite countertop sealer can also be used on marble and other natural stone surfaces.
For stone tile maintenance and protection this sealer penetrates thoroughly for a strong bond. You can also use this granite countertop sealer to seal grout. This stone tile maintenance product is a water-based formula.
Rock Doctor granite countertop sealer may slightly darken or lighten some natural stone. Stone tile maintenance is easy with this protector and sealant sold in a spray can.
Hint: Most stone surfaces should be sealed every 12 to 18 months. 1. Shake can well before using. 2. Test on a small inconspicuous area before full application. 3. If being used on newly installed grout, wait 48 hours before using this product. 4. Make sure your surface is clean and dry before application. 5. Holding the can 6-8 inches from the surface, spray Rock Doctor Granite Sealer on the desired area. 6. Wipe surface dry 2-3 minutes after application using cotton or paper towels. 7. Allow a minimum of 30 minutes to dry. 8. After 30 minutes you may conduct a test to determine if the surface is completely sealed by applying water droplets to the surface. If the water does not bead up, apply an additional coat. Wait 30 minutes and repeat the test. Note: Rock Doctor Granite Sealer may slightly lighten or darken some surfaces.
Warnings
Contents under pressure. Read precaution on back. Do not puncture, freeze or incinerate. Do not store where temperature exceeds 120 degrees F (49 degrees C) or in direct sunlight. Avoid spraying into or near direct flame. Use with adequate ventilation. Eye Contact: Flush with water for 15 minutes. If irritation persists, consult physician. Skin Contact: Wash with soap and water. Ingestion: Do not induce vomiting. Seek medical help. Inhalation: Remove to fresh air. If breathing is difficult or has stopped, get medical attention. Keep out of reach of children.
Reviews From Real Customers
The product does exactly what it should. Easy to use with quick results. No foul odor which is a plus. A little goes a long way.
I was very disappointed. I used the product exactly as explained on my bathroom marble counter and it made no difference whatsoever. The circles and spots that lost their shine were still there after 2 applications.
For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage Formula is oil and water resistant that creates an invisible barrier for protection Covers up to 1,000 square feet per quart Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements Easy application and will not yellow, safe to use around food prep areas 511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces.
511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.
INDEPENDENT LABORATORY TESTS SHOW 511 IMPREGNATOR OUTPERFORMS COMPETITIVE PRODUCTS. (Test results are available upon request).
Choose Rejuvenate All Floors Restorer to make all your floors shine like new. All Floors Restorer is a safe water and polymer-based floor finish that shines protects and renews any kind of sealed flooring surface and is the perfect solution on how to restore hardwood floors.
The mop-on floor restorer fills in scratches and restores shine to all sealed hardwood laminates vinyl ceramic tile terrazzo terracotta slate flagstone linoleum fiberglass and finer polished stone such as marble.
A single application of All Floors Restorer fills in scratches seals floors and protects them against UV rays that cause fading. The floor restorer also increases traction by up to 50% making your kitchen floors bathroom floors and all floors safer for you your family and your pets Applying a second coat will add an additional layer of protection.
Using a Rejuvenate Microfiber Mop Bonnet is the recommended applicator for All Rejuvenate floor restoration and refresher products. After use immediately rinse bonnet thoroughly. Hand wash or launder with mild soap air dry and enjoy years of use with this applicator bonnet.
Always test on inconspicuous area first. 1. Clean floors to remove soil, hair, debris, stains, or other products. Dry floors thoroughly. 2. Prepare surface. To enhance the maximum effectiveness of Rejuvenate, after you clean your floors, rinse your floors thoroughly or re-mop floors with floor cleaner to neutralize and remove any residue left over from prior cleaners. Allow floors to dry thoroughly. 3. Pour Rejuvenate directly onto dry floor (work small areas at a time approximately 4 ft x4 ft). Spread evenly over area with clean Rejuvenate Microfiber Mop, Microfiber Bonnet over a clean sponge mop, or a clean lint free terry cloth towel wrapped over a clean sponge mop ensuring that you are thoroughly covering floor. Important: Application of Rejuvenate is similar to painting. Do not work into surface, once applied, move on to next area. If you miss a spot, wait until floor is dry and pour Rejuvenate onto clean cloth or microfiber bonnet and touch up spot. Note: Only use when temperatures are above 50 degrees F. Allow to dry for approximately 45 minutes. Enjoy your showroom look! How many coats should I apply? One coat should be sufficient, however, you can apply a second coat as desired and re-apply Rejuvenate as often as you like with no build-up. How often should I apply Rejuvenate? To maintain your new showroom look we recommend that you re-apply Rejuvenate every 2 – 3 months or as desired. To re-apply, follow steps 2 and 3 above. General Cleaning: We strongly recommend using Clean & Revive Neutral Cleaner every time you mop. Clean & revives pH balanced free rinse formula is specifically designed to prolong the beautiful shine and luster of your Rejuvenated floor without harming the finish. Please do not use any solvents, ammonia based, or orange type cleaners as they will damage the shine and luster. Stain Removal: To remove stains simply pour Rejuvenate onto clean (lint free) cloth and gently rub on surface until stain is gone. Rejuvenate may be removed with any commercial floor stripper.
Warnings
Keep out of the reach of children. Keep away from heat source. Do not mix with any other product. Sensitive individuals should wear gloves. Do not allow product to freeze. Do not apply any other product or strong detergent over this product. First Aid: Eye irritant. Avoid contact with eyes. If eye contact occurs, flush with water for at least 15 minutes and call a physician. Do not ingest. Ingestion may cause nausea, vomiting, diarrhea and irritation. If this should occur, drink large volumes of water and seek medical attention.
Reviews From Real Customers
Laminate floors had been neglected for quite some time so I decided to revive them. I found the Rejuvenate products at Home Depot and figured I would give them a try as the specified they worked on laminates.
WOW! I am impressed. The cleaner worked well enough on its own but once application of the Restorer made the floors look amazing. I will be using this for the future and looking for other Rejuvenate products! Thanks Rejuvenate!.
I have used rejuvenate before and always had excellent results. The polish and cleaning products are specifically designed and sold for different applications: all types of floor cleaner, wood floor cleaner and polish.
Each design is well matched for the type of surface you are working with. It seems much more concentrated than general products that I have used. It smells good and dries rapidly which is very helpful for large surfaces.
The office vinyl flooring was damaged with lots of white stains. As people walked around on it, salted snow from the shoes made white stains everywhere over the floor. I tried to clean up using many different kinds of cleaner including hot water and vinegar but it remained on the floor.
Finally, I used this product and amazingly the floor has been restored like new.
Pouring concrete is quite the task to take on. Get the job done right with the Clear Protectant Concrete Sealer from RadonSeal. This unique sealer will protect your indoor and outdoor concrete against dusting, cracking, freeze-thaw, deicing chemicals, and efflorescence without changing its appearance.
When used before the application of concrete paint, epoxy floor coatings, clear sealants, concrete levelers, floating slabs, wood floors, and adhesive, this sealer will strengthen and waterproof cementitious building materials.
The RadonSeal works by absorbing deep into the concrete and sealing the pores and capillaries of the concrete below the surface. Unlike other sealants, this concrete sealer will not leave behind a glossy coating and won’t cause the surface to become slippery.
This factor makes the concrete sealer a great choice for areas your loved ones frequently walk on every day. Whether you’re creating a new concrete ramp or renovating your driveway, the Clear Protectant Concrete Sealer from RadonSeal will help you craft a firm foundation the first time around.
Key Features Interior and exterior use Weather-resistant Ok for food areas Superior coverage Less expensive UV transparent 511 impregnator meets VOC Compliant requirements
Trewax Stone and Tile Sealer Finish is a one-step beauty treatment for stone and masonry surfaces. The acrylic urethane finish provides excellent protection and durability. Detergent, scuff, and stain resistant, Trewax Stone and Tile Sealer is water-based and fast drying.
It has low odor, can be easily recoated, and will not discolor when maintained properly.
Floor sealer works well as a base coat before applying finish. Protects floors against common food and drink stains, petroleum and asphalt. Increases gloss of subsequently applied top coats on porous industrial floors.
Stain resistant floor sealer creates a level, stain-resistant, clear gloss surface for high-traffic vinyl and other hard surface floors. Provides excellent value – one gallon covers approximately 1,500 square feet.
– Works well as a base coat for a finish. – Protects against asphalt, petroleum and common food and drink stains. – Increases gloss of subsequently applied top coats on porous industrial floors. – Creates a level, stain-resistant, clear gloss surface for high-traffic vinyl and other hard surface floors.
Stain-Resistant Floor Sealer produces a level and clear gloss surface for high-traffic surfaces. Applying the sealer before a top coating or floor finish results in maximum strength improved shine and stain-resistance.
It can be stripped and reapplied as needed making it ideal for use on a range of hard floors including high-traffic vinyl in businesses offices and warehouses. The product covers up to 1500 square feet and produces a thin even finish by mopping in a continuous figure-8 motion.
Sealer is step 2 of the Zep Commercial 4-step floor maintenance program.
1. To prepare floor, strip floor using ZEP Commercial Heavy Duty Floor Stripper according to label directions. Rinse thoroughly. Allow floor to dry completely. 2. Pour sealer into a clean bucket. Using a dry rayon sting mop, apply 1 to 2 coats of sealer. To achieve a thin, even coat, move the mop in a continuous figure 8 motion. Allow floor to dry completely between coats to prevent hazing and to ensure adhesion; approximately 30 minutes under normal conditions. Do not use fans to reduce drying time; sealer needs to cure on its own. 3. To finish floor, use ZEP Commercial High Traffic Floor Finish, according to label directions. This step is necessary to provide a long lasting, durable finish. Keep container closed when not in use. Store in a cool, dry, well ventilated place. Protect from freezing.
Warnings
Eye irritant. May cause irritation to skin and mucous membranes. Contains Glycol Ethers. Avoid contact with eyes and prolonged contact with skin. Avoid breathing vapors or spray mist. Use only with adequate ventilation. First aid: eyes: flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops. Skin: flush skin with plenty of water. Get medical attention if irritation develops. Inhalation: get to fresh air. If irritation persists, get medical attention. Ingestion: do not induce vomiting. If person is conscious, give plenty of water to drink. Get medical attention. Keep out of reach of children and pets. For emergency medical assistance, call your local Poison Control Center or 877-541-2016. Do not reuse empty container. Keep out of reach of children and pets.
18. Custom Building Products TLPS24Z 24oz Tile/Grout Sealer
One step cleaner & re-sealer, ready-to-use cleaner for stone, grout & tile
Adds Extra shine to your product
Manufactured in China
Ready-to-use cleaner and resealer that inhibits growth of mold and mildew
Non-acidic, non-abrasive formula won’t damage stone, grout or tile
Protects grout, unglazed tile or masonry – Repels oil and water based stains – Also used as a pre-grout sealer for easy cleanup – Bottle New RSC stone care program designed to offer retailers a start to finish program with specialty products specifically made for the care and upkeep of stone surfaces in the home.
The grout on our floors were never sealed tiles were installed about 8 years ago grout is about a medium grey color. Well i have 4 small dogs that have accidents I wear my shoes in my home the grout got very dirty.
I seen a you tube video on cleaning grout it showed how to make a tool using a oxo good grip soap dispensing palm brush it has a hole in the center the you get a carriage bolt nut and washer put bolt nut washer onto the brush bought the tilelab tile and grout cleaner I got both the gallon jug and the1 quart spray bottle it did not say how much coverage started my cleaning sprayed on grout lines full strength small area at a time waited 15 minutes used the brush I had made with a cordless drill scrubbed grout then tile.
I can say it worked better than I thought it would tile and grout look brand new I am more than happy. Coverage all I can say is it goes a long way did not need the gallon jug. I was amazed with this product but the brush on the drill helped.
I purchased this to clean grout that was freshly installed 8 months ago. This grout was not overly dirty. I tried the product and used a scrubber from Home Depot designed for grout cleaning. I did a side by side comparison with hot water and they looked the same when dry, still dirty! I used some water mixed with vinegar and this cleaned 3 times better then the Home Depot garbage.
Don’t waste you time. Taking mine back for the next victim to use.
Now you can add more foot traction and safety to all kinds of slippery surfaces indoors and out with TracSafe Anti-Slip Sealer by Daich Coatings. It’s a unique pre-mixed formula that’s ready to apply wherever you need it.
TracSafe locks firmly onto all kinds of flooring materials, indoors and out. From concrete, patio stones and pavers, to slippery fieldstone, linoleum and even ceramic tile, you can make numerous slippery surfaces safer in just a day.
Treat slippery steps, walkways and wet pool decks, to garage and workshop floors, entrances, shower floors and more. It’s also great for business settings, including exterior grounds, steps, entrances and slippery interior floors.
Along with its anti-slip benefit, TracSafe is also a superior high performance sealer. It forms a tough, clear barrier that protects surfaces and helps keep them in ideal condition. It’s also an excellent top coat for use over all Daich decorative stone floor coatings and other prepared pre-painted surfaces.
Coated a diamond plate landing 3 times. Result has been great. When it is wet it has good grip but not overly gripping. Give a light sanding and make sure to clean with isoprpyl alcohol. Put a light coat and let dry at least 4 or 5 hours between coats (was 12 celcius out) Very important to mix the can thoroughly before and every time you go to do a new application.
Very good product, great sealer for painted cement floor in basement. Needs extreme shaking and stirring to get an even coat of grit throughout application. Even knowing this, I ended up with spots that don’t have grit, therefore feels different(slicker) when walking across.
20. Fila MP90 Sealer, Stain Protector for Polished Stone, Marble, Granite, Porcelain and Ceramic Tiles Floors and Not Fila Surface Care Solutions Seale
Graffiti proof coating, great for vertical surfaces in natural stone
Impregnates, protects and makes cleaning easier, ideal for protecting crackle-effect ceramic tiles
It is ideally suited for protecting kitchen floors, countertops and bathroom tops
Fila mp90 doesn’t change the natural colour of surfaces and it doesn’t form a film
The 1lt Fila mp90 is a very important product when it comes to polished marble, granite and porcelains, it provides a protective sealant over the tiles which will stop your tiles from getting tired looking.
What’s it for? It has been proven that by using the Fila MP90 on your polished marble tiles, granite tiles and porcelain tiles, that long term it will stop your tiles from looking tired, stained and in need of replacing before there time.
Not everyone is aware that some porcelain tiles like the 60x60cm Super Polished Marfil is actually a porous tile which needs to be treated with MP90, the reason for this is if the grout gets into the microscopic holes on to the tiles before the sealer, you will see very little blotches of grout deposits which trust be doesn’t make the tiles look very appealing.
If you are unsure whether you need this product it should tell you within the product description, if you are still unsure give a member of our sales team a call. Advantages? Using the sealer does not alter the natural colour of the surface of the tiles, Ready to use so you do not need to dilute with water, Seals, Protects, makes maintenance easier.
Ordered the 800 x 800 polished porcelain tiles in super white after ordering a full tile. It is definitely not pure white so if that’s what your looking for check the sample first. The tiles are super quality and are so accurate to size making laying a pleasure.
We laid 36 sq meters and are over the moon with them. The service was outstanding they were delivered as requested without any problems. Compared to the quotes we received from local tile shops tile mountain offered exceptional value and they excelled on every level.
The only thing I would check out is maybe to use ivory grout as it would hide the joints as white does stand out against the tile.
In the past two years I’ve been using Tile mountain. Is super convenient you buy product online and next day you have it at home. It’s saves me time and you could be sure that the product is excellent quality.
For few projects I bought also adhesive and grout. Simple just one click.
I was struggling to work out the number of tiles I needed for a random pattern so I called and the chap on the phone was very helpful. The option to order a sample is great as quality is very variable in tiles.
Love the option to pick a delivery day and very impressed with the speed of delivery. Tiles are great quality and look amazing now they are up.
Assuming you are asking for the best sealer for saltillo tile:
There are many types of sealers on the market, so it is important to do your research to find the best one for your needs. Some factors to consider include the type of tile, the porosity of the tile, the type of finish you want, and the amount of traffic the tile will see.
One type of sealer that is popular for saltillo tile is a penetrating sealer. This type of sealer penetrates into the pores of the tile, creating a barrier that repels water and dirt. Penetrating sealers are available in both water-based and solvent-based formulas.
Water-based formulas are typically easier to apply and clean up, but solvent-based formulas may provide a longer-lasting finish.
Another type of sealer that can be used on saltillo tile is a surface sealer. This type of sealer forms a protective layer on the surface of the tile. Surface sealers are available in both water-based and solvent-based formulas.
Water-based formulas are typically easier to apply and clean up, but solvent-based formulas may provide a longer-lasting finish.
The type of tile, the porosity of the tile, the type of finish you want, and the amount of traffic the tile will see are all important factors to consider when choosing a sealer for saltillo tile.
