Ready Seal wood stain and sealer contains all the essential elements of a quality finish for exterior wood projects. Ready Seal is a professional-grade wood stain and sealer in one that is superior to other products when comparing the ease-of-application, maintenance and beauty of the finished project.
Ease-of-application was a priority throughout the formulation of Ready Seal to ensure all consumers a hassle-free application, saving time for the contractor and promising a goof-proof process for homeowners.
Provides 3-way protection for exterior wood. Penetrates deep into wood to protect against wood rot and mildew. Provides waterproofing protection so wood won’t warp, crack, shrink or split from moisture.
Also contains a UV absorber to retard the fading and drying that occurs with sunlight exposure. Can be applied over severely weathered, painted, or stained surfaces and is paintable and stainable with oil-based products.
TWP 1500 Series is a low VOC formulation and should be used in place of TWP 100 Series in low VOC states. TWP 1500 Series is an EPA registered wood preservative which prevents structural damage and wood decay on exterior above ground wood surfaces such as untreated or previously treated fencing, decking, wood siding, log homes and roofing.
TWP 1500 Series is a low VOC preservative with special UV protection. TWP 1500 Series resists water absorption that causes warping, cracking and splitting as well as preventing freeze damage in colder climates.
I started using TWP products several years ago based on the poor results I was getting from the widely advertised well known products. I have never been disappointed with how well this stain holds up to the weather and sunlight.
Installed a cedar wood fence for our backyard, after a few months we noticed to wood was starting to fade so we applied a coat of this product and our fence look new! Really happy with the results. Would definitely recommend for anyone with a cedar wood fence.
Formulated to safeguard the natural beauty of wood and prevent discoloration. Offers 90% UV rating and superior mildew protection. Spray or brush onto wood surface, wipe with clean rag. Covers 150-300 sq ft per gallon.
Less expensive than Ace Hardware plus free delivery vs 130 mile round trip to Ace. I have used this product for 20 years now on log home and redwood deck. Product quality is high and consistent. If you apply product thickly you will end up with longer cure times and some gummy surfaces.
This penofin product is really great. The results bring out the woods beauty. I put it over wood the had a water sealer. Even though I thoroughly sanded the fence, not all the seal was off. This causes the oil to be shinny when it covers the sealer.
Krylon exterior wood stain is the first and only exterior wood stain in a convenient spray can. As durable as it is beautiful, it goes on smooth to leave a flawless finish that will hold up under the toughest conditions.
Features premium, durable stain. Fast, even coverage. UV fade protection and water repellant. Dries to touch in 15 minutes, to handle in 24 to 48 hours. For use with wood. 12 oz. can covers approximately 20 to 25 sq.
Watco Exterior Wood is a unique penetrating oil that hardens in the wood, not on the wood. New, old, or pressure treated wood becomes water repellent, provides UV and mildew protection, and resists warping and swelling caused by changes in weather.
Durable and easy to use, WATCO Exterior Wood Finish is great for decks, siding, fences and more. Please read product labels for additional directions and precautions before using. Stain, Seals, & Protects in one easy step.
Will not crack, chip, or peel. For best results flood surface and allow to penetrate for 30 minutes. Reapply, allowing an additional 15 minutes of penetration.
Good price but you need to pack things properly. Throwing 6 cans in a cardboard box suitable for 15 or more with absolutely no internal packing is a really bad idea. They all arrived intact but very beat up and dented.
A few more tosses and something would of sprung a leak. This is a recipe for disaster!.
Provides a natural finish that protects wood against moisture and sun damage. Fortified with PENETROL for excellent penetration. Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces.
Apply to new, dry pressure-treated wood, uncoated new or weathered wood, or wood previously stained or painted. Apply directly to weathered wood previously finished with FLOOD CWF-UV; other previous coating must be completely removed.
In the past I’ve used latex primers, alkyd primers and other recommended wood sealer/primers to prep for outdoor painting and have seen the effects of weather on my exterior home projects including porches and railings.
The last bunch of years i’ve been using Flood CWF-UV water based as either a sealer without paint and as a primer under exterior latex paint. One project was a raised boardwalk made of treated 2×6 lumber.
The Flood held up under traffic and the paint stayed on nicely. I just go with the Flood now. It seems to penetrate better than the primers. The natural dries slightly yellowish. If I get drips I can see the runs but it always dries perfectly.
I’m no expert but I much prefer the Flood for exterior wood projects now.
This is the 2nd time I’ve used this product (CWF Flood Cedar) on our cedar deck. The result with 2 rolled on coats is always amazing. We live in the Pacific Northwest, the weather from rain is often brutal.
Our deck is into the woods and moss grows heavily during the fall and spring months. It’s been two years since applying the First run of CWF, and with light power washes in between for moss removal, this product has stood the test.
I do a wet on wet application, this seems to work especially well. My deck is 200sq ft. And used exactly 1 gal. (Not sparingly) with all coats overlapping as I roll. Truly happy again with this product and will use forever of the duration of this deck going forward.
Thompson’s WaterSeal Waterproofing Stain provides complete outdoor wood protection. It waterproofs long after the initial water beading is gone. One coat protects; 3 years on decks, 4 years on decks & fences.
For use on decks and fences, outdoor furniture and exterior wood.
This exterior wood stain and wood protector adds medium color to your wood surface and allows some wood grain and texture to show. Prevent water damage with a coating that resists mildew and UV damage while providing a fade and scuff resistant color.
This KILZ Semi-Transparent Wood Stain features a 100 percent acrylic formula, which can last for up to three years on decks or five years on fences and siding due to its durability. Its innovative mix of ingredients will easily add beauty while allowing the natural wood grain to show through.
This exterior wood stain provides a durable, water-repellent finish that also protects against the sun’s harmful UV rays, offering a performance that users can rely on. The cedar wood stain is easy to apply for added convenience.
It’s available in a variety of shades, allowing for an optimal look for the home. The can has a helpful carrying handle so it can be moved around easily. This KILZ Semi-Transparent Wood Stain will make a lovely enhancement to a favourite space with its reliable blend.
Recently had a small porch built off our 100 year old cottage. The wood used was treated having lots of wood knots, which are very difficult to cover up. My wife wanted painted but I knew that just regular paint wouldn’t cover up the knots.
I took a chance-so I bought KILZ® Waterproofing Semi-Transparent Stain. I thought nothing ventured nothing gained. To my wife’s surprise and joy the KILZ Waterproofing actually worked. The knots were gone! Now KILZ is my go to stain!.
So I picked this up in store because I needed a quick deck stain and sealer. There were three “colors” (tan, brown, dark brown) but all were the same type, tint base deck stain and sealer. I figured it would be colored already.
Think again. It’s just a semi-transparent sealer. There was not an employee anywhere around the paint department to mix in the stain color (why it’s not already mixed I don’t know, considering they advertise colors on the can).
Even if someone WERE available to mix in the stain color, you would not find out that you need that done unless you pop the can open, come here to read reviews, or scroll down pages of instructions to the *caution* section on the manufacturers site.
It says nowhere on the can that you must have the color added. Very misleading. I prepped my deck, was ready to start, popped the can open and was sorely disappointed. Now I have to make another trip back to the store to have color added or buy something else.
Such a waste of time and energy when all they needed was a little text on the can that says “make sure to get the color added before you leave the store” etc. I have yet to find out if the product is any good as I’ll have to wait until tomorrow to even go back and get it colored.
STORM PROTECTOR: Storm Protector is a penetrating, semi-transparent stain and sealer that highlights the natural beauty of the wood grain while providing protection from Mother Nature. PROTECT YOUR EXTERIOR WOOD SURFACES: This siding, deck and fence stain and sealer offers superior waterproofing and UV protection to help prevent color fading.
FOR A VARIETY OF WOOD SUBSTRATES: Storm Protector exterior wood stain and sealer can be applied to any exterior wood, including redwood, cedar, pine, douglas fir, spruce, cypress, mahogany and pressure treated lumber.
EASY TO APPLY: Storm Protector features a ready-to-use formula that’s easy to apply. Mix thoroughly and apply to a prepared wood surface with a brush, roller, or sprayer. Packaged in a 1-gallon container.
PROTECTION TO WEATHER WHATEVER: From clear finishes that protect wood and highlight its natural beauty to more dramatic solid color stains, Storm Stain offers the look you want as well as the protection to weather whatever.
Protect your exterior wood surfaces and highlight the natural beauty of the wood grain with Storm Stain Protector Semi-Transparent Stain and Sealer. This wood sealer for outdoor surfaces penetrates deep to provide additional protection from Mother Nature.
It offers superior waterproofing and UV protection to help prevent color fading. It can be applied to any exterior wood, including redwood, cedar, pine, douglas fir, spruce, cypress, mahogany and pressure treated lumber.
With a ready-to-use formula, Storm Protector outdoor wood sealer and stain is easy to apply. Mix thoroughly and apply to a prepared wood surface with a brush, roller, pump or airless sprayer. Follow directions on packaging.
Packaged in a 1-gallon container. There’s nothing quite like the authentic, natural look and feel of exterior wood surfaces. Storm Stain was created to make it easy to keep your exterior wood looking beautiful and provide protection against extreme weather conditions.
From clear finishes to more dramatic, solid color stains, Storm Stain offers whatever look you want as well as the protection to weather whatever.
Natural Clear Transparent Waterproofing Wood Finish is ideal for decks, fences, siding, and outdoor furniture, where a clear or wood-toned finish is desired. Its penetrating formula with water clean-up provides durability.
Vermont Natural Coatings Exterior Penetrating Stain with PolyWhey technology is a low-odor, durable, element-repelling, semi-transparent stain and topcoat for the outside of raised garden beds, wood siding, decks, fences, furniture, and other outdoor wood surfaces.
It may be used on new, pressure-treated and weathered wood (pressure treated wood should sit for 6 mo to a year before application). If you have a different specie of wood, the appearance may be different.
Please order a sample to confirm the actual appearance on your wood. The natural strength of whey protein makes Vermont Natural Coatings Exterior Penetrating Stain a protective, environmentally safe finish for all exterior wood applications.
It is non-toxic, has low odor and contains no biocides, fungicides or anti-microbial agents. The pigments act as a natural UV inhibitor. By using recycled whey protein, Vermont Natural Coatings eliminates the need for heavy metal driers, toxic co-binders and carcinogenic solvents typically found in wood finishes.
The whey used in this product is a natural by-product of the cheese-making process used by Vermont farmers. It surpasses every national, regional, state and county air quality regulation.
CedarShield Natural Wood TreatmentPerfect for fences, decks, docks and outdoor furniture, CedarShield is a carcinogen-free treatment that protects wood from moisture, decay, termites and other wood-boring pests.
Cedarshield can be used on all hard and soft wood, plywood and bamboo. Unlike typical stains and sealers, Cedarshield requires just one application to be effective.
We hired someone to help us stain our new wood deck. The gentleman suggested applying Cedarshield before staining. He had so many great things to say about it; how it protects the wood from water, bugs, ect.
I was so happy to hear he recommended and loved the product. We had purchased it a while ago but had not had time to apply it. I was surprised that he knew about the product but he was more surprised to see we knew about it and had it in our basement already.
We ended up ordering more because our deck is very large.
BOXES – Providing a P. O. Box at all. – Return Return Payment Pay If you do not have a Pay Select Pay – Pal as the payment method you then will be given the chance to enter your card details in to Pay – Pal account to make paying for your items in the future very easy.
This ultra premium red label Penofin wood stain was created to meet the demand for an exterior wood finish that outperforms all other transparent wood stains. The highly-penetrating Brazilian rosewood oil base, from sustainably harvested seeds, protects and nourishes wood fibers far deeper than any other stain.
With the added mildew protection the “dark menace” will not attack wood so easily and helps preserve that freshly-milled look. Penofin ultra premium red label wood stain is perfect where rain, wind, snow or high elevations are encountered.
The formula in ultra premium red label wood stain is the result of extensive testing and the use of the highest quality ingredients. Penofin wins the “Battle Of The Stains” penetration tests over all competitors and gives longer life to wood of any species.
Our aim is continuous improvement and user satisfaction through effective implementation and quality of our products. Features. Stain & Sealer for WoodSpecifications. Color: Natural Cedar. Capacity: 1g.
Olympic WaterGuard Transparent Wood Stain with Sealer offers convenience and value. A durable acrylic oil stain that provides protection and a slight hint of color that highlights the wood grain. Perfect for multiple wood surfaces including decks, fences and wood siding.
The BEHR Premium Solid Color Waterproofing Stain and Sealer is an advanced 100% acrylic formula that delivers all-weather protection from the elements for up to 10 years on decks and 25 years on fences and siding.
The product is self-priming and delivers excellent protection from the sun’s harmful UV rays. This wood stain will hide imperfections and signs of aging wood and is also a great choice to refresh the color on composite decks.
Applied this to a brand new horizontal cedar fence. Tried using a Wagner Power sprayer (airless one) and it was a disaster. Although Wagner shows you staining a fence in their training video, it turns out that this stain is slightly too thick to use with the model of sprayer we have and it kept clogging and spitting (information I only got once calling the Wagner help line).
We had to quickly grab brushes and even out the color and switch to brush and rollers. You need to mix the can super well or you will get clumps of solids especially at the bottom of the can and your application will be splotchy or uneven with the end of the can being really dark as the solids sink to the bottom.
We mixed continuously, not just once. The color is ok, darker than we wanted but had to coordinate with our house color. When you apply, you need to roll or brush quickly and evenly to get an even application especially on bare wood as it will soak the color up quickly and unlike solid paint, it can’t just put another coat on to even it out as it is semi-transparent and the splotches will show through.
Having used other brands of stain, this one was no better or worse for that. Will see how well it holds up on a fence – it has only been 6 months. I hope not to have to do this job again for a while.