20 Best Screws For Pvc Board (2023 Updated)

Take on a range of fastening jobs with these multipurpose screws that are ideal for use with wood, particle board, MDF, decking, plastic, sheet metal, PVC and melamine. The steel screws feature a Climatek coating that offers superior corrosion resistance and allows them to be used in treated lumber applications.

The flat head offers a flush finish, and the R4 star drive delivers no-slip performance. A coarse thread and sharp point provide smooth and easy penetration into material.

Power Pro Premium Exterior Trim Screws are ideal for composite decking, wood decking, and exterior wood trim. These screws feature sharp under head blades, a twist shank to prevent splitting, and a patented Borefast thread design that requires no pre-drilling, and reduces drive torque.

Power Pro Premium Exterior Trim Screws include a limited lifetime guarantee against rust and corrosion. Recommended for use with treated lumber.

Cortex Concealed Fastening System for Trex Decking is a fast and easy way to conceal fasteners and screw heads when installing Trex decking boards. The FastenMaster Cortex box includes everything needed, including 224 screws, 300 plugs and 2 setting tools.

FastenMaster recommends installing with an 18 volt cordless impact drill. How many fasteners are needed? Horizontal trim boards less than 12″ wide, use two Cortex fasteners at every framing member – rafter tail or wall stud.

The screws should be 16″ OC or closer. Vertical trim boards (i. e. , next to a door or a window), use two Cortex fasteners every 16″ OC or closer. If a trim board is 12″ or wider, use three screws. Each trim board must be fastened within two inches of the end of each board.

Note: Predrilling is not required throughout the majority of the project. Predrilling is required when fastening within 1/2″ of the end of a board and at mitered joints. Use a 3/16″ drill bit for predrilled pilot holes.

Fulfill the fastening needs of your outdoor project with Deck Plus Composite Deck Screws. Specially designed to fasten composite decking, treated wood and other plastic materials, the Gray Star-Drive Composite Deck Screw will blend perfectly with your decking project.

Recommended for use in ACQ, CA and CCA treated lumber, the ceramic coating on this screw is able to withstand high temperatures while providing superb rust and corrosion protection. Engineered with pro-cut threads that reduce splitting and a self-drilling tip, installation is made simple with no need for a pilot hole.

The trap head and star drive on this screw aid to prevent mushrooming and lowers the torque for a smoother drive.

GRK R4 self countersinking screw has 6 self-contained cutting pockets which Act like a router and transport The drill dust away from the edge of the screw hole. They also widen the countersink hole only around the head Shape.

The screw head top closes the hole exactly, leaving no damaged fibers around the wider area of the head.

GRK R4 self countersinking screw has 6 self-contained cutting pockets which Act like a router and transport The drill dust away from the edge of the screw hole. They also widen the countersink hole only around the head Shape.

The screw head top closes the hole exactly, leaving no damaged fibers around the wider area of the head.

Cortex for Trex hidden fastening system is the fastest, easiest way to hide the heads of your deck screws on the market. Cortex offers a strong connection between the deck board and the joist.

Blue-kote screws are the next generation of rust-resistant screw. Blue-kote screws feature 3 anti-corrosion layers, making them the perfect choice for a wide of indoor and outdoor Kreg joinery applications.

Provides rust resistance up to 400% greater than zinc-plated screws.

GRK’s RSS screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.

RSS screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw’s drawing strength.

The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS screw is an efficient lag screw alternative.

Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates.

Collated screws mean increased productivity. Like their nail and staple counterparts, Senco collated screws offer professional installers a number of benefits, not the least of which is an overall increase in job productivity.

This is due in part to the fact that collated systems reduce the amount of time spent loading and installing loose fasteners, eliminating the need for feeding one fastener at a time. Square drive typeHigh/Low threadingFlat headed screw with self-drilling spoon point.

Brand Name: Ace *Callout Size: No. *Drive Style: Phillips *Head Type: Bugle Head *Finish: Ceramic Coated *Product Type: Deck Screws *Container Size: 5 lb.

Headcote SS Trim Head Screws – Deck Pack is designed to blend with all types of wood decking, including cedar, ipe, mahogany, and meranti. These premium quality deck screws feature extra deep star drive recesses, type 17 auger tips, and trim or reinforced flat heads.

For applications exposed to salt air, near large bodies of water, swimming pools or other areas where corrosion is more likely to occur, use Marine Grade 316 Headcote or Marine Grade 316 Deckfast Stainless.

They are also available collated for use with the Muro Ultra Driver tool. Headcote 305 and 316 screws match the profiles of Smart-Bit Pre-drilling and Countersinking Tools. For materials that require pre-drilling, especially hardwoods, this product combination makes it easy to achieve a clean and professional finish.

Senco Duraspin Screws for Composite Decking Screws are designed to attach composite decking to wood. Available in a variety of lengths and finishes. Type 17 point Collated #2 square trim head 2/3 coarse thread Models: 08R250W, 08R300W, 08S250W003, 08S250W592, 08S250W596, 08S250W497, 08S300W003, 08S300W592, 08S300W596, 08S300W497, 08R250S.

Engineered for optimum performance in multiple materials Power Pro One screws are the One screw you’ll ever need. Developed to outperform and replace standard wood sheet metal and concrete/masonry screws the One Screw program simplifies your tool box by using a single innovative engineered screw design to satisfy projects that fasten into wood metal concrete drywall and plastic.

The bronze epoxy coating is recommended for exterior projects and treated lumber (Not recommended for marine applications or projects within 5 miles of coastal waters). The flat head design and star drive provide easy and clean countersinking into wood.

Manufactured with spiral flutes serrated hi-lo threads and a 3-sided pyramid point no pre-drilling is required in wood drywall plastic or metal up to 20 gauge thick.

This full selection of self-tapping screws comes organized in a handy clear PVC case, perfect for transportation or storage. The wood screws feature a Phillips flat head and are constructed of zinc plated carbon steel to resist rust and corrosion.

Power Pro premium exterior deck and wood screws feature a no-strip star drive, countersinking blades, no-split twist shank and no pre-drill, bore-fast thread. Power Pro premium exterior deck and wood screws include a limited lifetime assurance against rust and corrosion.

The fastener coating is assured against corrosion in cedar, redwood and treated lumber for the life of the project. Common project applications include remodeling, fencing, storage assembly, cabinet assembly and framing.

Dura Spin, #8 x 2″, All Purpose, Exterior Wood to Wood, Collated Screw. #2 square flat head, with WeatherX3 finish. Coarse 2/3 with wax patented lube thread. Patented Serco Dura Spin feed system drives screws quickly and efficiently without jams or misdeeds.

Designed for composite decking. Comes with 1,000 to a pack.

Cap-Tor xd screws are specifically designed to provide a clean, smooth and uniform finish in PVC and composite decking. They also work equally well in traditional composites. Cap-Tor xd is approved for use with all major PVC and Composite deck brands.

Cap-Tor xd screws feature extra deep star drive recesses, undercut heads, reverse threads, tri-lobular shanks, Type 17 auger tips, and are available with either a color matched, epoxy-based polymer resin coating or in color matched Headcote stainless steel (both Grades 305 and 316).

Headcote SS Trim Head Screws – Deck Pack is designed to blend with all types of wood decking, including cedar, ipe, mahogany, and meranti. These premium quality deck screws feature extra deep star drive recesses, type 17 auger tips, and trim or reinforced flat heads.

For applications exposed to salt air, near large bodies of water, swimming pools or other areas where corrosion is more likely to occur, use Marine Grade 316 Headcote or Marine Grade 316 Deckfast Stainless.

They are also available collated for use with the Muro Ultra Driver tool. Headcote 305 and 316 screws match the profiles of Smart-Bit Pre-drilling and Countersinking Tools. For materials that require pre-drilling, especially hardwoods, this product combination makes it easy to achieve a clean and professional finish.

These high-quality decking screws are ideal for use with the Kreg Deck Jig or as a general fastener for a wide variety of deck projects. Protec-Kote features three anti-corrosion layers chemically-combined to provide strong protection against rust and corrosion in many common outdoor applications.

Ideal for ACQ-treated lumber.