20 Best Screws For Particle Board (2023 Updated)

Take on a range of fastening jobs with these multipurpose screws that are ideal for use with wood, particle board, MDF, decking, plastic, sheet metal, PVC and melamine. The steel screws feature a Climatek coating that offers superior corrosion resistance and allows them to be used in treated lumber applications.

The flat head offers a flush finish, and the R4 star drive delivers no-slip performance. A coarse thread and sharp point provide smooth and easy penetration into material.

GRK Fasteners’ R4 Multi-Purpose Framing and Decking screws provide a faster drive for improved productivity. Typical applications include multi-purpose general framing, remodeling, decking topboards and structural framing applications.

R4 Screws can be used in wood, particle-board, plastic, sheet metal, cement fiber board, wood decking, composite decking and melamine. Frame with Ease and Confidence with the R4 Multi-Purpose framing and decking screws.

GRK R4 self-countersinking screw has a new under head with saw-blade like cutting teeth and six self-contained cutting pockets. Together these features act like a circular saw blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment.

This design further enhances the R4’s versatility by allowing the fastener to be installed without countersinking into even the hardest woods. The screw head closes the hole off with precision, leaving no damaged fibers around the head.

R4 screws which are 1-1/4 inches and longer have a four threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener. This technological advancement allows the wood to settle easily and increases the screw’s drawing strength, reducing the friction on the screw shank and lowering the driving torque.

The R4 is a multi-purpose screw that can be used in all woodworking and plastic applications. Because the head has a 90 degree angle at the underside, the screw fits perfectly into the pre-countersunk holes of hardware fittings such as hinges or locks.

Stocking of different screws is no longer necessary because the R4 is a very versatile screw. These screws work great in wood, plastic, particle board, sheet metal, cement fiber board, composite decking, wood decking, melamine and much more.

GRK’s RSS screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.

RSS screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw’s drawing strength.

The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS screw is an efficient lag screw alternative.

Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates.

GRK’s RSS screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.

RSS screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw’s drawing strength.

The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS screw is an efficient lag screw alternative.

Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates.

GRK’s RSS screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks.

RSS screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw’s drawing strength.

The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS screw is an efficient lag screw alternative.

Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates.

GRK’s R4 self-countersinking screw has a patented under head with saw-blade like cutting teeth and 6 self-contained cutting pockets. Together they act similar to a circular saw-blade, transporting the drill dust away from the edge of the screw hole while cutting a perfectly clean hole into even the most brittle materials without cracking any surface treatment.

R4 Multi-Purpose Framing Screws are used for wood, plastic, cement fiber board, particle board, sheet metal, wood decking and melamine. For use in all applications that include pressure treated lumber.

These sheet metal screws, or tapping screws, are highly versatile and are used to attached metal, wood, fiberglass, and plastic. The sharp threads draw material together and ensure a secure hold. Sheet metal screws are fully threaded with a sharp point.

Strong-Tie SDW EWP-Ply screws are specifically designed for fastening multi-ply wood members, such as engineered-wood products and solid-sawn lumber. The SDW EWP-Ply screw installs easily with no pre-drilling and is available in optimized lengths for fastening 1-3/4″ engineered lumber, such as laminated veneer lumber, LVL, or structural composite lumber, SCL.

Low-profile head results in less interference after installation, makes stacking and sliding easier and allows finishes to be virtually flush.

FlatLok is designed for various multi-ply dimensional and engineered wood connections. Flat head allows for easy finishing including drywall or trim. Approved for single-sided installation. Torx ttap bit is included, reducing the potential for stripping.

No pre-drilling. Guaranteed corrosion resistance. ACQ approved. Code compliant.

8 x 3 Combo #2 Sq/Ph Round Washer Head Particle Board Screw T-17 Zinc Plated (1500)Phillips/Square Drive Round Washer Head Particle Board Screw, Type ‘17’, Zinc Plated used for Wood screw for interior wood applications.

Asymmetrical thread pattern, Type ’17’ reduces wood splitting Combo Phillips/Square drive, Superior holding power.

GRKs R4 Self Countersinking screw has 6 self-contained cutting pockets which act like a router and transport the drill dust away from the edge of the screw hole. They also widen the countersink hole only around the head shape.

The screw head top closes the hole exactly, leaving no damaged fibers around the wider area of the head.

GRKs R4 Self Countersinking screw has 6-self-contained cutting pockets which act like a router and transport the drill dust away from the edge of the screw hole. They also widen the countersink hole only around the head shape.

The screw head top closes the hole exactly, leaving no damaged fibers around the wider area of the head.

Collated screws mean increased productivity. Like their nail and staple counterparts, Senco collated screws offer professional installers a number of benefits, not the least of which is an overall increase in job productivity.

This is due in part to the fact that collated systems reduce the amount of time spent loading and installing loose fasteners, eliminating the need for feeding one fastener at a time. Square drive typeHigh/Low threadingFlat headed screw with self-drilling spoon point.

The new award winning Powerfast II Woodscrew from Fischer is the perfect solution for use in hard and soft woods. Countersunk head with Pozi No. 2 recess, zinc plated, full thread. Ce approved. Advantages Fast bite tri-blade tip for fast start.

Easy installation improves battery life on tools. The chipboard screw has significantly reduced timber splitting behaviour in comparison with other performance wood screws. The unique geometry of the new Powerfast II screw reduces edge spacing, increases load capacity and reduced driving torque.

The unique blue passivated zinc plating does not contain chrome VI and is environmentally friendly. Stick fit Pozi seat for reduced Cam-Out. Please download attached pdf file for further information.

The No. 10 (5mm) x 25mm Fully Threaded Pozi Pan Head Chipboard Screws – Stainless Steel (A2) has the following features:No. 10 (5mm) Thread Size (T), 3. 3mm Head Length (H), Not Standardised Manufacturing Standard, 25mm Length (L), 25mm Thread Length (E), Stainless Steel (A2) Material, Stainless Steel (A2) Material Specification, Natural Finish, Metric Metric or Imperial?, 10mm Head Diameter (D).

Discover more about the Fully Threaded Pozi Pan Head Chipboard Screws range. Fully Threaded Pozi Pan Head Chipboard Screws are designed for use with chipboard or similar particleboards. The Pozi Drive of these components is designed for use with Accu’s range of Pozi Drive Bits and Pozi Screwdrivers.

GRK 02177 R4 Multi Purpose Screws,12/14 x 6-3/8 inch, 50/Handy Pak condition: New Brand: GRK FastenersMPN: 02177Model: 02177GTIN: 00772691021779

Power Pro premium exterior deck and wood screws feature a no-strip star drive, countersinking blades, no-split twist shank and no pre-drill, bore-fast thread. Power Pro premium exterior deck and wood screws include a limited lifetime assurance against rust and corrosion.

The fastener coating is assured against corrosion in cedar, redwood and treated lumber for the life of the project. Common project applications include remodeling, fencing, storage assembly, cabinet assembly and framing.

Engineered for optimum performance in multiple materials, Power Pro One screws are the One screw you’ll ever need. Developed to outperform and replace standard wood, sheet metal and concrete/masonry screws, the One screw program simplifies your toolbox by using a single, innovative, engineered screw design to satisfy projects that fasten into wood, metal, concrete, drywall and plastic.

The bronze epoxy coating is recommended for exterior projects and treated lumber. The flat head design and star drive provide easy and clean countersinking into wood. Manufactured with spiral flutes, serrated hi-lo threads and a three-sided pyramid point, no pre-drilling is required in wood, drywall, plastic or metal up to 20 ga thick.

Concrete and masonry applications require a pre-drilled a hole. Each package includes a free durable Pro-Stik star driver bit.

8 x 2 1/2 Combo #2 Sq/Ph Round Washer Head Particle Board Screw T-17 Zinc Plated (2000)Phillips/Square Drive Round Washer Head Particle Board Screw, Type ’17’, Zinc Plated used for Wood screw for interior wood applications.

Asymmetrical thread pattern, Type ’17’reduces wood splitting Combo Phillips/Square drive, Superior holding power.