20 Best Screen Protector For Google Pixel Xl (2023 Updated)

The instructions were very clear and it was easy to apply, so no complaints there. I did notice that the instructions said to buff away any left over residue for a nice shine. I let the product cure for one hour without touching the screen and I found the reside to be very smudgy.

However, I used my regular spray cleaner and the smudges did come right off and the screen did shine very nicely. I should have read the warranty registry instructions first, because I put my phone back into its case before taking the necessary video, but it was no big deal to take it out again.

I reached out to customer service for a quick question and they answered me within HOURS! Which was very shocking, did not expect them to be that fast. So far, I don’t have a single complaint, and I plan to purchase this again when the warranty runs out.

Thank you!.

Most cell phones have a glass screen that resists scratches. The Switch has a plastic screen that is easier to scratch. The Switch dock has hard plastic edges on the inside if the “U” that can scratch the screen when you dock it.

So a screen protector is very helpful in protecting the screen from scratches, particularly a glass one. One of the first things I did after getting my Switch as apply one of these protectors and it’s gone well.

The instruction pamphlet includes a link to a video that demonstrates the steps listed. The instructions are somewhat generic, written for application to a phone, but are clear and simple to understand for the Switch.

The protector has plastic handles built into the topmost protective layer that makes it easy to line up the protector and apply it without touching the screen in the process. I’m used to throwing out the first protector or two as a “practice run” after screwing up the installation or getting too many bubbles, but I got this one on the first try.

I read a review on another site that suggested waiting 24 hours before putting the switch in the dock to avoid bubbles; I’m not sure if this is required, but I could see it being a time to allow the adhesive to set.

I let it sit flat for a day and haven’t had any issues with bubbles or peeling after several dockings and un-dockings. The protector itself is well sized and designed. It covers the whole screen and the cut-outs for the microphone and ambient light sensor are the right size and position.

There’s no cloudiness or discoloration from the glass The packing is quite good. They are shipped in a tough cardboard or fiberboard box and individually wrapped in foam. You can re-close the box again with a piece of tape to keep the installation accessories together.

They provide two sets cleaning wipes so you have enough for the second protector when you need to install the second down the line – all screen protectors will wear out or peel off eventually, but the abuse that causes that to happen is what the protector is keeping away from your device’s screen.

Great all around.

I ordered this particular screen protector for my Nintendo Switch after hearing stories of easy scratches from the dock and other miscellaneous uses. I have heard other protectors from PDP and Hori don’t get the job done well enough and this was the best selling one on Amazon.

After reading stories and reviews on this one I gave it a shot. The directions it provides are simple but I recommend finding a YouTube video on a real step by step guide to applying it. The wet and dry wipe provides in the kit really take away any dust and finger prints left on it.

They don’t tell you but I recommend applying two dust removal tapes on the bottom when aligning the Switch so it’s easy to apply the screen protector once you remove the seal as you apply it. The card they provide to rub away the bubbles helps a little bit not by much as it bends too easy.

Get a credit card from your wallet and rub it away and don’t worry about damaging the screen since you’ll remove the second layer on of it from where pull on both tabs. Also use your finger to rub away bubbles more quickly as they do tend to be a pain to remove if you’re too slow to do it.

I’m not a big person on screen protectors since they do more damage than good I feel but I really do trust this brand and believe it’ll keep my Switch scratch free from me and the dock. I recommend this to everyone who wants a long lasting Nintendo Switch in their hands as well as for kids since you never know how they’ll treat their electronics.

Thank you for taking the time to read. Happy gaming.

The glass protector is amazing and installs beautifully, once you figure out the trick. I had trouble with debris getting under the glass while installing. To get around this: 1. Turn off all air in the car.

Set screen to screen clean mode. 2. Get a long piece of painter’s tape – a few inches longer than the screen is tall. 3. Wash and clean the screen, align the glass and install. 4. You will have debris get under the glass – it just can’t be helped.

5. Lift up a corner of the glass and the dust will typically come with it – the dust will stick to the glass, not the screen. 6. Slide the painter’s tape under the glass, with the sticky side pointed towards the glass protector.

7. Shimmy the tape back and forth until you get the tape under a dust mote – once the tape is underneath, press the glass against the tape; the dust will stick to the tape. 8. Lift up the glass and shimmy the tape along the length of the screen until you get all the dust.

You might have to come in from a few different sides to get everything. 9. Enjoy!.

This was simple to put on and takes very little time. The absolute best way to minimize effort here is to keep Tesla’s plastic tear away screen protector on until you buy this upgrade. This will keep the smudges and dirt off your screen, which are the only complications during install.

Trapped dirt or smudges are a nuisance and can be remedied by pealing back, cleaning, and resticking.

The biggest problem i had was that the installation kit includes a screen sticker (to remove dust and lint from the display screen) sized for the regular (smaller) iPhone. That means there is no easy or one-step way to clean the larger iPhone Plus screen.

Trying to apply the screen sticker multiple times almost guarantees to cause smudges and actually make the screen worse. Because of these difficulties, i ended up ruining one of the protectors in the package.

Luckily, i had a second one i could try with this 2-Pack. However i still had difficulties and found some lint trapped under the protector. The actual manufacturing quality of the glass protector is also a bit off.

I aligned the glass to be centered on the Home button and speaker/camera cutouts on the top, but doing so left one of the side edges slightly (like maybe 1 or 2 pixels) on the screen. That causes a distorted rainbow effect down the whole edge of the screen.

If i had known or noticed it would be like that, i could have aligned the glass to the edges of the screen (but then of course the button speaker, and camera cutouts would have been slightly misaligned).

The price for 2 protectors is great. And i had no issues with installing the smaller standard size on another phone, but JETech needs to include a full-size dust removal sticker for the Plus-sized iPhones.

I have purchased this product twice and will continue to buy this product from JETech. The quality of the screen feels just like the OEM. It is truly a glass protector as I tried folding an older one I’ve replaced and it did indeed shatter like glass.

It is a TEMPERED glass meaning it is safe and it didn’t harm me at all. I was testing the product and it holds up to it’s name. The only recommendation i have for the manufacturer is to extend the width of the screen protector.

If you don’t line up the glass protector perfectly you can get this rainbow like effect reflecting from the light of the phone to the edge of the screen protector. It’s not too bad and my eyes have come adjusted to it.

Also note the iPhone I have has a white front bezel. I’ve purchased other products through JETech and would recommend them for your tech needs! It’s hard finding a company that invest in their products especially for the price! Great Value!!.

I have ordered many glass screen protectors over the last year (including double packs) from Jetech and they crack within a few weeks. Mind you, I NEVER drop my phone and always have a thick cover attached.

I have no clue how the cracks are happening but whatever it is, I am not being protected by my Jetech glass. The quality of Jetech screen protectors have gone down in the last year!! I just put a new one on and 4 days later, I see a small splintering crack on the side by the volume buttons.

UGH!!! I will be looking for a new brand who makes better quality products in the future.

I’ve had these on a few phones. Inevitably you will drop your phone sooner or later. When that happens hopefully you will have it in a nice well made case. Not talking about bling here, more like Otter-box.

Yes, I know. they are huge and you get zero style points but. one of those with this screen protector will help prevent a broken screen. Two or three times, I’ve dropped my phone hard enough to break the glass.

Luckily, each time I had this screen protector installed on the phone. Last couple of times I dropped my phone, they hit the ground corner first from about a waist high drop. Each time, the Tech Armor protector cracked at one of the corners as they are supposed to do.

They developed a hairline crack and preventing damage to my phone screen. These protectors are not flimsy, they are not glass of course but you do not lose any of your touch screen features. Your phone will work the same as always.

Of course, drop your phone hard enough and something is going to break. I have nothing but good things to say about Tech Armor screen protectors. Get it!.

I absolutely LOVE these screen protectors! I have bought many others and nothing compares to these. Very good value and for approx. $11, you get 3 of them (which if you don’t damage them, will outlast your phone!) The last one I had on my IPhone, I had on for a year.

Other than 1 small scratch, it looked brand new. Only reason I had to change it is because I ran over my phone with a 10 ton loader. The screen protector and Otter box broke, but my phone was unharmed! I would highly recommend to anyone who needs a screen protector AND has an Otter box or similar case.

They do not cover the whole screen as you can see in the picture. If they did, they would not stick and peel off every week! By the way, I did actually pay for these and they WERE NOT free with a review.

I have been using this brand for all of my iPhone. And it been holding up pretty good. BUT! I had bought x2 of the X3 pack of screen protector and they are good but not great. Honest reviewer !!! ***1 is horrible and 10 is excellent *** Scratch protection as advertise ? 6.

5- ( great product high quality but after use it a couple week i can see a couple scratches on the screen. Not that noticeable but it there!) True touch as advertise? 10- (perfect as advertise) Resists to fingerprints as advertise? 2- (I have to clean it very often even though i use it a couple time trough out the day) HD clear as advertise? 10- (perfect high quality picture will not notice if screen protector is there) Thank you Hieu Ngo.

Highly recommend this case as the material is very sturdy but allows edge sense and squeeze to wake Google Assistant. The back of the case translucent but smokey gray on black pixel looks black. Very high quality, sleek looking.

The fancy packaging along with the product info and materials specification is impressive. Without a case, this phone is slippery.

Great look and feel. Nice amount of grip yet slides in and out of pocket easily. Very slim profile but has bumper around edges and screen. Port is accessible and wireless charging works fine. A great way to showcase and protect a phone that costs nearly $1,000.

00!.

This case is exactly what I wanted. It provides the protection that I was looking for and allows the natural look of my phone to show through nicely. It is supposed to be resistant to yellowing, but only time will tell.

So far, so good. I dropped my phone twice yesterday and there was no damage so the case did it’s job.

For every phone I’ve owned it is wrapped in an OtterBox case. Recently I purchased the plum/coral box for my new Google Pixel XL 2. I also purchased a black box for my old Google Pixel XL which I’m giving to a family member.

I had a pink case for it but ordered the black since he isn’t into pink, lol! Obviously, I love my OtterBox’s! Seems that the OtterBox always outlives my cell phone, so you know it’s great! Just a suggestion to OtterBox.

it would be fantastic if a screen protector came with every box. I wouldn’t mind paying extra for it personally. On a personal note: The Google phone is the only phone to own in my opinion. Between a Google phone and an OtterBox you will have the greatest combination! For me.

I only buy OtterBox and have found nothing that even comes close! I hope this helps! Cheers! ;o).

The original plastic protective layer is very bad. First it is plastic. Second it has a gap between your screen, you have to press hard. Other than this it is a perfect protective case for people constantly drop phones.

It adds some thickness but provides true protection and the buttons are still responsive. To solve the cheap plastic issue. First I pry it off and cleans the glue residues. Second, I put a real fiber glass protective screen from Spigen to my phone.

And then fit the phone into the case. I am very satisfied with my modification. The fiber glass is day and night better then the plastic cover with gap. I guess this is one big reason why this case can not sell very well.

I bought this case a month ago directly from the website. I was glad they sold them before the preordered phones shipped. It arrived quickly and before my phone. When I put the case on my phone I immediately noticed that the rubber was much harder than the cases for the iPad 3, iPhone 6, or Samsung Note 2.

OtterBox also added ridges to the side, which I assume are for grip. Instead, the line of hard rubber next to the grip ridges digs into the soft part of your thumb. I’ve used it for a month and it’s gotten betterish as it’s worn down or my thumb has calloused.

The case doesn’t fit well into the Daydream VR headset. So if you plan on ever using it in the day dream, also plan on taking it out of the case. Overall, I would not recommend this case for the casual user or anyone that plans on using the Daydream.

When I first attached the screen, there were bubbles in a line down each side, towards the edge. But over a few days they reduced and went away. It takes a few days to attach but happy now. Very strong screen, does the job well.

Easy to attach and doesn’t make a lot of fingerprints on the phone