20 Best Screen Protector For Fitbit Charge 2 (2023 Updated)

While the protective properties of the materials are good, I’ve found that I’ve had to replace them every couple months or so, sometimes longer sometimes sooner. I followed installation instructions step by step in each application and allowed to dry overnight before putting into action.

Not sure if corners dont seal completely, if its susceptible to water/perspiration, or if it snags easily, but its always one of the corners that releases first and eventually needs replacing. I’ve used 4 or 5 (of package of 8) in about 7 months.

Don’t have any issues with this product since it has protected my fitbit, but wish they were more durable. And its still good value for the money for a set of 8. Application is quick and easy.

I am on my first screen protector and it has been on for around three weeks. I have two Fitbit products and I purchased the coordinating Rinogear for each product. The two products are a Fitbit Ionic and a Versa 2.

The installation was fairly simple and from passed experience of installing large decals I only use Joy dish detergent and only like two or three drops for a 12oz of water. I thought that the Versa would be very difficult seeing how the screen is so curved compared to the Ionic but it was just as easily installed.

I also used slight heat from a heat gun (hair dryer would work fine) to speed up the process. The screen was sightly frosted as the directions said it would be and it got more clear as days passed. My Ionic gets more abuse than my wife’s Versa so I’ll describe it’s condition.

The protector is still stick down even around the corners and it does have noticable scratches but they do not seem to be through the protector at this time. With out the protector I had a small scratch on my screen in no time when I started wearing it.

As of now I recommend this product and it is a definite help to keep your products screen protected. BSarge.

Even though I didn’t find a specific video online for how to install this to my FitBit Ionic. I simply watched one of the videos for installation to another Fitbit device and followed a similar process for my watch.

I followed the directions precisely and it worked perfectly. The video cautioned that it may look slightly cloudy at first, but it would clear up. and it did. I was successful on the first try. Subsequently, I’ve worn the watch swimming and hiking on a brushy trail with no issues.

Touch screen still works perfectly too.

It’s very rugged as advertised and well built. The only reason I didn’t give it 5 stars is because it limits some of the extra features such as the EKG and EDA scan, which utilizes the the metal ring around the frame of the FitBit Sense.

It’s really not the fault of the case though since it’s main function is to protect the device; it’s more of a design flaw of the FitBit Sense unit. I can lift heavy weights comfortably with it without having to constantly worry about damaging a $200+ device.

If you want to use the EKG and EDA scan feature, you have to pop it out of the case, which isn’t too difficult.

The Fitbit Versa 2 case we ordered from Spigen fit my husband’s watch perfectly. My husband was pleased with the look and material of the case. It looks much better than the previous one he used.

I had TPU on it before. When gets wet smudges not with this case and band combo no more smudges. Its raised lips on on shell on vera not covering screen. No issues so far. I would perfer material be a bit softer than be alot better.

I still have a fitbit 3. I am always getting the screen protector messed up. I watched the install video and got it installed just fine. (and I tell ya, I can mess anything up) The screen protector has protected the Fitbit face a few times.

When the protector gets bad enough, I replace it. On my 3rd one. Good thing it’s a package of eight! Also the screen protector Does not interfere with tapping the screen to move through the different pages.

If my Fitbit lasts long enough, I will get more of these. The only down side is the corners start to peel up a little after my abuse as the picture shows.

The shipping for this item was extremely fast and pleasant. The price is completely reasonable for the eight screen protectors you receive. In my package I received the eight protectors, a microfiber cloth to clean your screen with, an application card to squeegee the air bubbles and excess solution out and detailed instructions, which I HIGHLY suggest reading.

Had I read the instructions first the application process would have been much smoother. The item itself is perfectly cut for the FitBit Charge 2 screen. It took me going through 5 of the screen protectors to realize you have to apply it with a soapy water solution and squeegee the bubbles out.

Once I read the directions (which I should have done first haha) it adhered correctly without bubbles and I was able to clearly view the screen. You have to allow 8-10 hours for it to thoroughly dry and not have a foggy haze on it.

Note: if there is a foggy haze on the screen then the solution has not yet completely dried and it s not ready for wear. I let mine dry overnight and it was ready for wear by the next morning. The screen protector itself is extremely durable and completely covers the entire screen.

I constantly hit my FitBit on the wall or corner of my countertops etc. and it does not have a scratch on the screen. I ve had the same screen protector on since I figured out how to correctly apply it, about 4 months.

I don t need to change it yet, either. I really like the fact that the sides don t peel up or curl back on the corners. Aside from the few scratches the protector has received (better than my FitBit, amiright?) it s still in great shape.

It s easy to clean off and doesn t move when doing so. That being said I was definitely recommend this to anyone looking for a screen protector for their FitBit Charge 2. I ll be purchasing another pack here shortly (since I went through 5 trying to figure out how to apply it haha).

It s a great product. Note: The photos posted are after 4 + months of wear.

I love these! I don’t bother with water or soap. I use some good size tweezers with a flat grabber edge and grasp the slightest bit of the protector sheet on the very edge of the long side. Holding my Fitbit by the watch in my left hand I carefully lay the protector sheet down starting on the bottom width edge.

I can tell right away if I am centered and close enough. (These fit near exact. ) Keeping it in the air, if it doesn’t look good I simply lift it up and place it down again. Sometimes I get it lined up first time sometimes it takes two or three tries.

Once i like the way it is lined up I gently lay it down on the whole watch face. Next I simply press it down or use a credit card to press out bubbles and make sure It is stuck well. Note, It will look a little blotchy and not clear.

A few hours later it will be completely clear and will last week’s, even months. When I need to change it, I use tweezers to lift it off and then repeat the above process. I have done this half a dozen times.

If the tweezers make a slight indentation it doesn’t matter because it is on the very edge that sort of tucks down near the band. Plus in a few hours or the next day the indentation will go away. Love the product and they provide replacements for life.

Awesome!.

First of all the screen protectors were ordered December 27th and just arrived January 13th. No tracking numbers were provided. I just sat down to apply to my daughters watch and these things are literally trash.

They are little plastic stickers that you peel off and have no choice but to touch the sticky side thats going on the screen. Which then puts finger prints on it. Once you get the thing on the bubbles are impossible to remove.

I would not recommend this to anyone!.

I work physically hard whether it’s house project or outside. I like knowing the fitbit face is protective. It is easy to apply. I use cup of water and put in a drop or two of dishwashing cleaner and stir quickly.

Wet both sides of screen protector and glide it on. I let it sit overnight to dry. Wonderful!!!.

I got my son a fitbit ace2 & needed a protective cover for it & chose these. They had good reviews so why not. They arrived today & were SO easy to apply! My son, who is 10, mixed up the solution & I put it on.

Hardest part was waiting for it to dry because he kept asking if ut was done lol it took roughly 10 min to dry but in kid time, it may as well be 10 hrs lol thrilled with this purchase!.

I read all the negative reviews before buying this product, and bought it anyway. I didn’t find the video on www. spectreshield. com, but there are PLENTY on YouTube. The people who complained about fingerprints, sticking before they were ready, etc.

DID NOT FOLLOW INSTRUCTIONS. Get a little dish of water with some dish soap in it (a couple of drops) and dip in all the fingers that will have contact with the film. AFTER getting your fingers wet, remove the film from the backing and dip it in the soapy water.

(Hang onto it so you know which side has the adhesive). I also put a little soapy water on the screen of my Fitbit Charge 2, as well, to make sure the screen was clean/lint-free, and moist to allow the skin to slide easily.

It was a little difficult to keep the protector in position because it slid around so easily. Once in place, I dabbed it LIGHTLY with a soft cloth and let it sit for about a minute before using a credit card to squeegee.

After that minute, the film was already pretty firm, but I squeegeed from the middle to the edge (lengthwise) in both directions and pressed a cloth against it to absorb any moisture. No bubbles, no cloudiness at all.

I let it sit another 3-4 hours before replacing the band and using it again. (Removing the band makes the whole process easier!) Bottom line: The individuals with the negative reviews can only blame themselves.

This is a GREAT product and I **HIGHLY** recommend it. I have had my Fitbit for 6 months and had gotten some scratches on the screen. You can’t see them anymore! Looks brand new!.

The strip is kind of stretchy. So anyway, when you apply the protector, and you use a card of something hard to roll out the bubbles it creates dents into the film that doesn’t bounce bout because of the softness of the film.

It makes the bit screen appear cheap and the protector is definitely visible. Ok and after wearing it awhile, the edges are lifting; it has a white border that is collecting dust. I guess I was really hoping for this price, it would have been like one of them hard plastic or glass shields, it is just a small film.

Anyway, for the price, they could have done protection for the side metal areas of the too. I used a few of them for that purpose, though you have to stick and cut the edges. Also, the application of the product is a bit difficult.

If you have large fingers its hard to position especially without getting fingerprints under the film. They should have had like side tabs on the top that you peel off after you get the positing right and pushed the film down.

I don’t know if this is better than the 99 cent stuff you can buy from ebay. I don’t think I would buy it again.

I didn’t even know we had such thing available until I started looking for some kind of protection for my Fitbit. I spend a lot of time outside working on my garden, tending my horses, moving things around.

and that makes anything I’m wearing a victim of my outdoor nature! I have waited a few weeks to write a review so I could give a more accurate opinion and yes, I would totally recommend these. Not only because of the super convenient price for the amount of protectors you get, but also because these are really quick and easy to adhere, flawless.

You will find instructions, helpful links and everything needed inside the package. It hasn’t been scratched by now. so it is sturdy enough for me. And once that happens I will just replace the protector (it will end up being scratched for sure, due to the kind and amount of work I do daily) I will definitely buy again whenever I need more.

Now my children and husband are wearing them too.

The screen protector was very easy to apply to my fitbit. It only took a few minutes and turned out perfect. I have only had it on a couple of days but no damage to the protector or fitbit face. Even if the protector gets scratched I have 7 more in the package so I think I’m good for the life of this fitbit.

(Brand new Charge 5).

This screen protector is great, if you follow the directions exactly. Use their video tutorials as well!!! I purchased this last in early 2020, we have 2 Fitbits in our family that use these so that s 4 each.

They are not absolutely permanent. The first one I ever did I screwed up so that was gone. But the 7 remaining with 2 devices lasted me over 2 years. I had maybe one fall off randomly after a while, but the other fell off with pretty serious impact which damaged the protector and left my Fitbit PERFECT.

It s a similar application to a wet vinyl on windows (if anyone has ever done that). You spray the watch, lay the protector on, let it dry slightly to get tacky and press down on the edges. As it dries it cures to the screen which gets rid of bubbles and fogging.

There s a little piece of plastic it comes with to squeegee out any bubbles or extra liquid during the application. Once it s on let it set for a while. If you do it at night and go to sleep it will fall off! You need to let it have time to cure , so put it on and let it set for about 8-10 hours.

I put it on and then let my watch sit on my nightstand overnight to set. These have been an absolutely lifesaver to me. The most severe was when I had fallen against concrete, scraping right against my Fitbit watch face, and the protector took all the damage.

Of course it peeled off and wouldn t stay on, but the screen under it looked brand new still. Absolutely worth every penny, but only if you re willing to do it exactly as directed, otherwise you won t be happy.

Received FitBit Versa 2 screen covers very quickly from Amazon. Watched the video on installation method and found it quite detailed. Following the instructions from online video, I thoroughly cleaned the FiBit with the microfiber cloth and then affixed the cover I had dipped in the water/soap solution (I used WARM water) after shaking off excess solution.

The cover affixed smoothly and I was able to move it into position with little effort. No visible air bubbles could be discerned after I used the flat tool included in the kit, and I let the watch sit for 10 minutes before attempting to attach the lifted ends/corners.

These did not stick so I gave them another 15 minutes and tried again. This time the did stick and I pressed out any air pockets in those edges easily. The cover was now fully attached with no wrinkles or air spaces discernible and was left to dry.

I think that the cover application was as easy as could be expected, and I know that it will last a long time on the FitBit. I can recommend this cover kit as a good solution for protection of the FitBit watch for anyone with the Versa 2.

I am sure that other kits for other FitBits or even Apple watches will also go on as easy as the Versa 2 kit. Just watch the videos and follow the instructions religiously and no issues should arise.

My only “deviation” from the video was using warm water (NOT hot). I felt this would assist in keeping the cover pliable for the installation.

I’ve used other screen shields in the past and I find that the soft shields, like this SpectreShield, are actually better than the tempered glass ones. The only thing that I think was pretty cheap of SpectreShield, was to not include any application solution in this package.

Fortunately, I saved some from my phone screen and it worked great for this purpose as well. A spray/mist bottle will work great in a pinch. The process was simple, it went smoothly. I do wish that the screen went all the way to the bezel of the Fitbit Versa 2.

But my watch screen is now protected from the vast majority of bumps and scratches that would otherwise come its way while on my wrist, and conductivity seems to be well in tact. Thanks SpectreShield.

This screen protector works great for my Fitbit blaze. It was a simple application with no air bubbles left afterwards. Very inexpensive and don’t have to worry about scratches now! Would buy it again.

Awesome , easy to put on you wont notice its there. I did get some air bubbles because i was in a rush to work but thats okay still doesnt affect me ill rather have my screen protected since i work at oreilys would rather have plastic screen on then scratching the surface.

I bought the screen protector for my Fitbit blaze and so far no complaints. Good quality/ Thank you!

Liked the way this screen protector slid right on and was movable to place it well due to it being wet, not dry and sticky. No real bubbles. Takes a little longer to put on but worth it. After it was stable in the place I wanted it, it was already sticking to the watch screen.

Waited a little longer to press down the sides and it stuck easily without waiting as long as the video said it would take. Good protection, can’t tell it’s even there. No problems with bubbles like other types.

I received my package of 8 Rino Gear Shield protectors for my Fitbit Versa 2 watch. I watched the install video, followed the instructions and voila–success! I never even got one tiny bubble on the inside during installation (which apparently isn’t a big deal because the micro bubbles disappear after a day or two anyway), but that is a first for me.

So, if I can do it, anyone can. Plus–BONUS–I got a $5 Amazon rebate which was a surprise because that wasn’t even advertised! I am very happy with this purchase!.

Having not read the directions, I put the shield on in the regular way and am very satisfied. No bubbles, fits perfectly and is, so far, doing well to protect my little screen. Since I didn’t read about the wet application, I didn’t know there was another way to apply the shield and admit that I made a mess of the first attempt, but there are 8 shields in the package so I just ditched the first one and started again with a second.

There is a little cloth to clean your screen before beginning and I could even have avoided the tiny bit of fingerprint in one corner if I’d used tweezers to place the shield. It went down onto the screen fine and the included stiff card worked perfectly to remove bubbles.

I ended up with a perfect application and one would never know I had a screen protector on my device from looking at it. I wear my Fitbit all the time since it serves as my watch as well. I don’t ‘work out’ per se, but have plenty of ‘farm chores’ that keep me busy and active.

They are also very rough on my Fitbit and I’ve had screen problems with previous units. I wanted to protect this one and so far the shield is doing just that. It’s been on there about a month at this point and so far, so good.

I found the wet application to be easy, taking only a few minutes. The enclosed quick start included a QR link to a full instructions video. The diluted dish soap solution makes placement corrections easier than a dry adhesive.

I found the fit to be good. The sheet is slightly shorter and narrower than the actual watch crystal. Since the face rolls on the edges, I don’t expect scratch protection performance to be compromised.

I see no change to the touch responsiveness of the watch with the shield in place. It is too early to see if the film meets protection expectations. I have used similar films on other tablets and PDAs with great success over years of use.

This is a wet installation screen protector, meaning you use a mixture of warm water and dishsoap to adhere the protector to the fitbit screen. You line it up as you want it, and let it sit overnight to dry fully.

I did have some issues getting this to install smoothly without bubbles the first go round, so I did use 2 protectors to get it just right. But, they give you 8 in the pack so you have plenty to mess with.

It has stayed on nicely, no bubbling, moving, or edges peeling. It protects the screen from scratches well.

I used this product to protect the screen on a new Charge 5. Installation instructions are easy to follow and product works exactly as advertised. The only issue is, you have to be very careful that there is absolutely NO dust on the surface of the watch face and that NO dust specks get on the protective cover once it is removed from the sheet.

Even tiny specks will show up. However, if the instructions are followed correctly this is not a problem. The shield provides good protection from scratches and doesn t interfere with function of the tracker.

Good value!.

It works well and the installation is easy, just follow the instructions in the video. I’ve done it already like 3 times (3 different watches) and it’s worked well. Just dip the film in the soap-water solution and apply it to the watch.

Get the major air bubbles out and possibly the corners won’t stick just yet. Then after leaving the watch alone for like 20-30 min the film is not 100% set which allows you to adjust it a bit more and to get the corners right.

Then just forget about it for like an hour and the watch should be set.

The screen protector is cut to fit EXACTLY to the edge of the screen. Since the screen on my Fitbit is curved and has a beveled edge, the edges don’t won’t to lay down flat during install, and easily get messed up after install.

Also, similar wet-install screen covers I have used in the past come with the liquid solution need to apply the protector. You have to make your own with this system (an unspecified amount of water and dishsoap.

). Not impressed. Would not buy again.

As someone who has never successfully applied a screen protector to a device (usually I end up pulling them back off and going without), all I can say is this worked great. Yes, the wet install took more time than a traditional screen protector but the process was also way more forgiving.

I wasn’t sure how it was going to look at first because the edges didn’t seem to want to stick down 100% so they were still slightly visible, but 12 hours later it looked great. I accidentally popped the protector off one-half of the screen because I tried pressing the edges down too soon and it left a small mark on the inside of the protector.

I probably should have re-wet it and started over, but a week later even that mark is barely visible. The picture was taken the morning after application, about 12-14 hours. The edges are more visible in the photo than looking at it with the naked eye.

I have a 40 year old Tag Heuer watch with a mineral crystal that looks like I’ve been dragging behind my car for all that time. I have no illusions about a FitBit lasting anywhere near that long, but it has to be worn to be of any use.

I work in construction and am active everyday so wanted some protection for my new FitBit Inspire 2. The RinoGear screen protector should do the job. I watched a couple of YouTube installation videos before starting.

I used a drop of dish soap in a shallow saucer of distilled water to wet the protector, dipping it with a pair of tweezers. When placed on the tracker face it slides around easily when wet. The first step should be to get it centered in position.

Press out any big bubbles carefully, it will slide around. In a few minutes it will begin to dry and grip the trackers face. Then you can begin to press down the edges. If the edges dry out too much to stick add a drop of water to re-wet and carefully press the edges with your fingers without pushing the protector out of alignment.

It will conform to the curved edges of the Inspire 2. I have a small blemish in one corner of my first attempt, but overall am satisfied with results and hopeful that it will provide lasting protection.

As an active new Fitbit Inspire 2 owner, I began to notice my device starting to get marred. My first thought was to get it a screen protector. However not having ever used one, which one to get. The reviews and price led me to RinoShield.

Therefore, I purchased one. While reading the installation instructions, I began to watch YouTube videos showing how well the material protected cell phones. On multiple occasions, people would place the shield on a cell phone and hit it with a hammer.

I never saw one in which the screen got damaged. Wow!!! The process of installing the RinoShield on my Fitbit was very easy. Simply clean the screen, dip the material (which was a perfect fit) into a soapy water solution, place in the screen, and wait for it to dry.

Simple!!! I’ve been wearing my Fitbit with the RinoShield for several days and it looks as good as the day that I put it on. I expect it will continue to look great for the future. Although my wife and I have never used a screen protector on our cell phones, she has broken her screen a couple of times.

We doubt that this would have occurred if we had invested in RinoShield. We plan to correct that oversight in the near future.

Love these screen protectors! I use them on multiple different devices, and am very pleased with the ease of application and durability. Being a soft screen protector, they do not last forever, but mine last 4-6 months each with pretty rough use.

There are 8 screen protectors in a package. The price is right and customer service is excellent! I did have the opportunity to reach out to the company with a question, and received a prompt response.

I just purchased a new Fitbit Inspire 2, and this screen protector is a perfect fit. If you have never applied this type of protector, be sure to watch the video for details. I always wait at least 12 hours before wearing the devce after application.

The screen protector fully cures in about 3 days and any bubbles and/or haziness does dissapear completely. Many folks don t take the time to watch the installation instructions and/or give the product time to fully cure and they complain about the quality of the screen protector! The product IS very good it has to be user installation error, because my screen protectors easily last 4-6 months.

I usually change the screen protector after it really becomes scratched (and I am rough on them). I do not submerge my devices, so I have never had a screen protector lift off the screen on its own. These Rino screen protectors are worth the money and they DO protector your screen!.

Used for 1 day and removed it. Left fingerprints would not seal on the edges of screen. Complete was of time and money

Good protection for the fit bit. Saves the screen from being scratched or harmed.

Fantastic screen protector: I’ve been buying Zagg InvisibleShield Glass phone screen protectors for years, and they have never failed to protect my phone screen. The very first thing I do when I buy a new phone is to also buy a phone case and a Glass screen protector from Zagg, and install both *immediately*! I tend to drop my phone frequently, so an effective screen protector is a must for me.

With this product, when I drop my phone, it’s the screen protector that cracks instead of my phone screen. I also have never changed the screen protector, even after it’s been broken and cracked, and it still effectively protects my phone screen during drops and falls.

I thought about taking off one star for the combined con of it being ludicrously expensive (though it’s definitely worth the money, and I’d much rather pay this price than the $700+ for a replacement phone) and inexplicably inaccurate installation (ha, I swear that alliteration was unintended), but those aren’t important enough to warrant making this a 4-star review; it’s a 5-star product.

The installation is weird though. They tried so hard to make it absolutely fool-proof for a flawless installation, and they went through the trouble of creating hefty pieces of plastic just to make installation easy and perfect.

Yet somehow, no matter how much I cleaned the area and tried in vain to push the bubble out of the screen, one of the corners of the screen had a bubble that simply *would not go away*! Everything else is perfect, the placement is perfect, there’s no bubbles or hairs or anything at all anywhere.

except that bottom right corner. About 5mm of the entire bottom right corner is not adhered to my phone screen, and wouldn’t adhere from the start; this is problematic because I worry that with time, and sooner than later, the screen protector will simply peel itself off.

Considering how expensive this product is, I really don’t want that happening. Anyway, I do highly recommend this product; Zagg’s InvisibleShield Glass screen protectors in general are must-haves, and worth the money!.

I’m not 100% in love with this protector. I tried 2 off Amazon first, LK is what I used for 3 years in my Pixel 3a. It was ok, but had a lift off point at the top flange (they did 2 notches at the top sides) the left side never adhered to my screen but it wasn’t actually used display space.

The LK I ordered for my Pixel 6 had a few small air bubbles I never could get out and the glass held oil from your fingers rendering the fingerprint sensor unusable unless you wiped the screen first.

I threw it away after 3 days. This protector is a premium price 4 times what I paid for the LK. There is 1 tiny lift off spot on the left part of my phone. The lift off is about 1 mm wide and 4mm long on the top left portion of my screen.

It really bothers me since I paid $50 but it’s not causing any other issues so I won’t submit for a replacement for that. I didn’t even realize there was a killer lifetime of you owning the phone replacement warranty.

I picked this protector because you get what you pay for. The reviews I read on Google said this had a beveled edge that was invisible. Lies. It’s no where near as profound as LK, but there is a rainbow reflection on both sides and around the camera cutout.

I preferred LKs camera cut out being a circle just around the camera instead of leaving a gap unprotected at the top. But of course I could see that in the picture before I ordered. This glass protector feels great.

Top quality glass and the fingerprint sensor has still been fairly responsive even without the display settings changed to make it more sensitive. I wish the protector was a little larger. 2mm larger on every side, 1 mm larger on every corner it would still fit inside my OtterBox defender pro series case.

I don’t think you would have the rainbow reflection if it was a bit larger. Grey and black backgrounds don’t cause it but white backgrounds do. The case is edge to edge screen display coverage, with 1mm more than display coverage on the top and 2mm more display coverage on the bottom.

I haven’t contacted the company to see how easily the replacement works but if it’s super convenient and the company is responsive I’d bump this to 5 stars. And I would subtract stars if they make getting the replacement agonizing and ignore messages for weeks on end, then I wouldn’t recommend this I’d recommend saving $40 and getting a 2x or 3x pack from Amazon.

This protector feels more like the Pixel 6 screen than the LK.

I really wanted this product to work since it is quite a bit more expensive than the usual screen protectors. It was fairly easy to install; however, there was an item included that was not mentioned anywhere in the instructions.

Too bad I only figured out what I was supposed to do with it after the fact. At first the protector was great; but then some bubbles started appearing on the sides. No matter what I do I am unable to remove them.

I am a bit upset with my purchase as I could have bought 2 sets of screen protectors (with each having 2 or 3 shields) for the same amount of money that I paid for one shield. I believe I will contact the seller to see if I have any recourse in this matter because I don’t want to be without a screen protector.

If I am unable to get a replacement shield I will be pretty unhappy since I used a $30 Rewards Certificate plus had to make up the difference with cash. Another problem (in my estimation) is that only ONE shield is included so if you muddle up the installation you’re in big trouble.

I got the shield installed without too much trouble because there are tabs at the top and bottom to help get it centered. However, bubbles appeared later and that has allowed dust, etc. to get under the shield.

Right now I am not a happy camper. I intend to take my phone into Best Buy the next time I am in the vicinity to see what, if anything, can be done.

Okay so, first off, this screen protector is fantastic! It works, it sticks well, and it does not alter the aesthetic of the screen or change the way it looks. That being said, it is a WET INSTALL!!! Yes, your Fitbit will be wet after.

Yes, it is possible to get it stuck on with no lint, no fingerprints, no bubbles, and no corner peeling, but you HAVE to know what you re doing. First, wash your hands. Then assemble your supplies. You ll need some paper towels, a clean jar with some warm soapy water (try to not allow any bubbles to form), and the pieces that come in the package.

Disassemble your Fitbit and clean it well. Wiping down with alcohol helps. Second, get your fingers wet with the soapy water. Now drop a small drop on the glass screen of the Fitbit. With soapy hands, peel the screen protector off the protective paper and immediately put some soap on the side that was stuck to the protective paper, aka the sticky side.

DO NOT HOLD THE SCREEN PROTECTOR TOO TIGHT OR YOU LL LEAVE FINGERPRINTS IN THE STICKINESS! Now, gently place the screen protector sticky-side down on the Fitbit and carefully adjust it to where you want it.

Now, this is especially important. Pinch down in the center of the screen protector to keep it where you want it, and with the little papery scraper thing that came in the package, gently begin wiping from the center to the edges to remove excess water and bubbles.

Gently work any bubbles out. GO SLOW! The screen protector will continue to shift around until you remove enough water from between it and the Fitbit. Keep wiping gently until the protector stops moving around.

Now, using the little swath of fabric from the package, gently press down as you carefully move from center to edges and push out any excess water. Use the paper towels to clean up any excess water. Allow it to dry for an hour or so (or however long you wish) and you should have a perfectly-applied protector with no bubbles or peeling and no lint or fingerprints messing up your excellent job! If you go slow, you ll do just fine!.

I am really happy with this product, but I am also happy I got a multiple pack. They definitely hold up and keep the screen of my FitBit scratch free, but the actual screen protectors seem to get scratched quite easily (might be also due to my line of work) and I have replaced the protective film about three times in the last few months.

Easy to peel off and replace. Definitely make sure to read the instructions and/or watch the video! I know in the video instructions it says to fill a cup, but I found just using the little medicine cup that comes with your regular OTC cough syrup is plenty big enough.

I bought this for my Fitbit Sense, and I absolutely love it! It took me 2 tries to get it placed correctly, but that was fine since it came in a pack of 8. Once I had it placed correctly, there were several large bubbles.

At first I was disappointed, but I let it sit overnight just in case time helped. The next day, the bubbles were almost gone, but there looked like there might be a little water stuck underneath. I gently used my finger to push the water out and then let the screen protector sit a little while longer.

After some time, the bubbles disappeared! Now, I can barely tell that the protector is there. I love it! So if you’re having a bubble problem, just give it some time to settle, and gently push any water that might be remaining out.

Patience is the key!.

I had to go to the website to watch a video, which was fine, but nothing in the product description mentioned it didn’t come with everything needed. The video showed it could come with a wet solution or you might have to make your own wet solution with clean water and dish soap.

I had to do the latter and it was really soapy, even though I used less soap than instructed by half. I really liked the installation process being able to move and reposition it. Unlike other methods where you are literally stuck with where you first place it, this was much easier to get it where I wanted.

For that reason I really liked it. It took some working on the edges to get them to stay down but they finally made a near seemless edge. This was also better than dry application protectors I’ve used.

This is a 4 star product for me simply because it’s not as invisible or near invisible as I expected and the final look is cheaper than expected. I can see a little bit of fuzziness on my watch face in a few spots, but when the face is not lit I cannot see any bubbles or anything that might be causing it.

It also has a bit of a plastic look when not lit. My phone screen protector that is tempered glass looks like there is no protector on at all when the screen is off. This looks plastic when the screen is off.

It actually cheapens the look of the over $200 Versa 3, which I’m not happy about. I do like that there are 8 of these if you mess up an installation and want to try again fresh. I may still order a tempered glass option in pursuit of something that won’t cheapen the unlit face.

Worst case if I decide to come back to this protector, I still have 7 more.

The package says it is for Fitbit Versa but the online description said it fit Fitbit Sense. Don’t panic. It does. Iopened the package and searched for the screen protectors and could not find them. (Found later that day) They were packaged in a white plactic sleeve inside a cardboard envelope that is white on the inside.

It was tight enough in there that it moved with the cardboard. (Seller, can you change the color of the plastic sleeve? ) When you do the wet application, make sure you remember which side peels off the backing.

Once, it is wet, it is really difficult to tell. The rest, just follow the directions in the video. It didn’t take nearly as long to dry as the video indicated. Remaining bubbles were pressed out an hour or so later with no problem.

The screen protector fits well. Since my Fitbit Versa 3 has a curve to the screen at the edges, I couldn’t get a glass screen protector. It would not curve to fit. So, I got these. My daughter and I each used one as we each have the same Fitbit.

They went on easy but show where you have bumped or scratched the screen. Mine has been like that since I put it on because I scuffed it up just trying to get the air bubbles out. I can only see that when the screen is black, so I guess it’s okay.

I just wish it didn’t get so scuffed up so quick. Since the package has so many, I may put a new one on soon.