20 Best Saw Blade For Hardwood (2023 Updated)

Diablo’s finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. These blades are the perfect choice when seeking high quality rips and crosscuts using a portable saw. The combination of Diablos application specific TiCo Hi-Density carbide teeth and a super thin-kerf blade deliver smooth cuts, increased cutting speed and longer life.

A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood. Specially formulated Diablo TiCo Carbide withstands impact, reduces wear and lasts longer in fine finish applications.

Perma-SHIELD non-stick coating protects the blade against heat, gumming and corrosion. Advanced Laser Cut Stabilizer Vents traps noise and vibration for maximum stability, keeping the blade cool with accurate cuts in wood.

Super Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and longer cutting life. Tri-Metal Hock Resistant Brazing provides a high performance shock absorber behind every tooth.

Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation on cordless and corded saws.

60 teeth Ultra finishing blades offer the quality that fine cabinet makers expect with the capability to handle extreme conditions of professional construction Unique kerf deisng Perma. Shield non stick coating and Tico hi density carbide produces remarkably clean chip free cut that requires little to no sanding.

Circular saw blades ripping carbide teeth dia 8 inches -1/4 tpi=24. Made from high density tungsten carbide for toughness, wear resistance and long life. Tough coat anti-stick coating reduces friction and gumming.

Thin kerf design for smooth cuts. Reinforced shoulder for impact resistance in nail embedded wood. Tough-trac k tooth design for accurate tracking over the life of the blade.

Forrest Premium Carbide Saw Blades cut cleaner, more efficiently, and last longer between sharpenings than almost any other blade. They feature super hard, long life micro-grain carbide teeth on laser-cut plates that are hand-straightened to a maximum runout of.

002 inch. These top quality blades rip and crosscut super smooth and tear-out free. All are 10 inch diameter and fit 5/8 inch arbors. Made in the USA, the Woodworker II ATB blade is the most popular for general table saw use.

It has a plate thickness of. 090, and the kerf is 1/8 inch. If most of your cutting is stock 1-1/2 inch or thicker, Forrest recommends the 30-tooth blade.

Diablo’s finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. These blades are the perfect choice when seeking high quality rips and crosscuts using a portable saw. The combination of Diablos application specific TiCo Hi-Density carbide teeth and a super thin-kerf blade deliver smooth cuts, increased cutting speed and longer life.

A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood. Specially formulated Diablo TiCo Carbide withstands impact, reduces wear and lasts longer in fine finish applications.

Perma-SHIELD non-stick coating protects the blade against heat, gumming and corrosion. Advanced Laser Cut Stabilizer Vents traps noise and vibration for maximum stability, keeping the blade cool with accurate cuts in wood.

Super Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and longer cutting life. Tri-Metal Hock Resistant Brazing provides a high performance shock absorber behind every tooth.

Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation on cordless and corded saws.

Diablo’s Ultra Finish Blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. Diablo’s blade produces a remarkably clean, chip-free cut that requires little to no sanding.

Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding. TiCo Hi-Density carbide specifically designed for each application to increase performance Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion Super thin laser cut kerf for fast, durable, and clean cuts Ideal For: Ultra Finish crosscuts and rip cuts in wood, plywood and melamine.

Specifications: Diameter: 6-1/2 inch Teeth: 60 ATB Age Group: adult.

Diablo 40-Tooth Finish Circular Saw Blade, 7-1/4 in. , is ideal for smooth finish crosscuts in hardwood, softwood, or plywood and receiving high-quality rips and crosscuts when using a portable saw. This saw blade increases cutting speed and provides a longer life with its combination of super thin kerf blade and TiCo Hi-Density carbide teeth.

The kerf design provides less resistance and heat build-up, while the TiCo carbides withstand damage and reduce wear. A Perma-SHIELD non-stick coating also helps protect the blade from heat, gumming, and corrosion.

Receive maximum stability with its advanced laser cut stabilizer that traps noise and vibration, and the laser cut arbor which reduces vibration and premature wear to achieve accurate blade rotation on cordless and corded saws.

This saw blade also features a tri-metal hock resistant brazing that provides a high performance shock absorber behind every tooth.

The blade cuts through a wide range of materials, including composite decking, laminate, plywood, softwood, and hardwood. It is a handy tool for woodworking projects, especially construction-related work like cabinetry, joinery, framework, and restoration.

The blade features induction-brazed carbide teeth that extend its service life and give you more years of use. The steel plate is heat-treated to prevent warping and covered in a corrosion-resistant coating to keep rust at bay.

The blade produces a fine woodcut finish and is suitable for dry cutting.

Diablo’s finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. These blades are the perfect choice when seeking high quality rips and crosscuts using a portable saw. The combination of Diablos application specific TiCo Hi-Density carbide teeth and a super thin-kerf blade deliver smooth cuts, increased cutting speed and longer life.

A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood. Specially formulated Diablo TiCo Carbide withstands impact, reduces wear and lasts longer in fine finish applications.

Perma-SHIELD non-stick coating protects the blade against heat, gumming and corrosion. Advanced Laser Cut Stabilizer Vents traps noise and vibration for maximum stability, keeping the blade cool with accurate cuts in wood.

Super Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and longer cutting life. Tri-Metal Hock Resistant Brazing provides a high performance shock absorber behind every tooth.

Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation on cordless and corded saws.

The BAUER 80T Fine Finishing Circular Saw Blade has super-sharp construction grade C3 carbide teeth for fine cuts on most lumber even if it’s wet or pressure-treated. The Nitro Shield non-stick coating protects the blade from heat, gumming, and corrosion.

Laser-cut expansion slots keep the blade straight and true during heavy use.

Diablo’s next generation 12 in. X 100 tooth ultimate flawless finish carbide Circular saw blade features new laser-cut Stabilizer vents for precise and clean cuts in wood materials. The advanced Stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through wood cleanly, quickly and accurately.

Constructed with TiCo Hi-Density special-blend carbide, Diablo’s 12 in. Ultimate flawless finish blade produces flawless cuts that require minimal rework and provides 5x longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight.

This blade is excellent for cutting delicate molding, prefinished materials, Stair and banister construction.

Diablo, 7-1/4 inch x 36 inch, wood & metal, saw blade, multi-purpose saw blade for cutting clean wood & wood with nails, up to 2-1/4 inch material thickness, metal ranging from 3/32 inch to 1/4 inch wall thickness, versatility of these blades provides the ability to use the same blade to cut wood & metal, tico carbide tips, specially designed for this blade, coupled with the blades chamber alternate tooth design c-atb tooth design provides impact resistance for cutting wood with nails as well as the durability for creating clean, burr free cuts in metal, optimized for corded & cordless saws, blade cuts 2x lumber, wood with nails, angle iron, channel, flat bar, steel studs & threaded rod.

Age Group: adult.

The Ax Sawzall blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wood demolition blade on the market. A thicker, more rigid blade body resists fracturing and bending for maximum durability.

The 1″ tall blade body reduces blade twisting for straighter, more accurate cuts. Matrix II bi-metal teeth for greater durability.

Diablo’s Ultra Finish Blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. Diablo’s blade produces a remarkably clean, chip-free cut that requires little to no sanding.

Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding. TiCoc Hi-Density carbide specifically designed for each application to increase performance Perma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion Super thin laser cut kerf for fast, durable, and clean cuts Ideal For: Ultra Finish crosscuts and rip cuts in wood, plywood and melamine.

Specifications: Diameter: 6-1/2 inch Teeth: 60 ATB Age Group: adult.

This BAUER plywood saw blade features a high tooth count to cut plywood, paneling and veneer evenly and smoothly. Made of carbon steel with sharpened ground teeth, this plywood saw blade has a ground and polished carbon steel body and is rated for 8000 RPM.

Hardened blade body ensures the blade runs truer for longer. High grade carbide teeth offer increased durability. Evolution blades have been designed for Evolution cutting saws, but they can also be fitted to other brands.

Made in Japan.

Hailed as the Cadillac of all blades, Forrest saw blades have become legendary for their ability to leave highly polished, finish ready surfaces on nearly everything they cut. Choose the style best suited for your cutting needs and see why Forrest has earned the reputation for being the saw blade by which all others are judged.

Made in USA. For radial saws and table saws. These all purpose blades give scratch-free polished cuts on wood. Crosscut up to 2 inch thick. Rip up to 1 inch thick. They have a 30 alternate top bevel with a 5 face hook on 10 inch diameters and smaller.

(On 12 inch diameters and larger – 20 ATB). They are also made with double-hard and 40% stronger C4 carbide. Thin kerf design saves 1/3 wood loss on each cut, feeds easily when used for moderate rips and crosscuts on a table saw.

Eliminates bottom splintering on radial crosscuts. With the new 30 ATB tooth style, this blade stops splintering on ply veneers on both radial saws and table saws.

Forrest’s blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible.

Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process.

Forrest stands behind it’s blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer’s blades as well, so they should come back better than new.

Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2 inch thick. They have a 30 Alternate Top Bevel with a 5 Face Hook on 10 inch diameters and smaller.

Age Group: adult.

The BAUER 80T Fine Finishing Circular Saw Blade has super-sharp construction grade C3 carbide teeth for fine cuts most lumber even if it’s wet or pressure-treated. The Nitro Shield non-stick coating protects the blade from heat, gumming, and corrosion.

The BAUER 24T Framing Circular Saw Blade has super sharp, construction grade C3 carbide teeth for cutting construction lumber, hardwood, softwood, plywood, chipboard and laminate. Expansion slots prevent blade from warping during heavy use.

The Nitro Shied non-stick coating protects from heat, gumming, and corrosion.