20 Best Price On S&W M&P Shield 9Mm (2023 Updated)

I have owned Alien Gear holsters for a number of years. Not only are these holsters constructed using the highest-quality materials, the customer-service is always superb. This 4. 0 Sig P365 holster disappears when being worn and is super comfortable all day long.

I HIGHLY recommend these IWB 4. 0 holsters.

Supremely comfortable holster with adjustable retention and unlike other holsters that attach to your belt in only one (1) location, the cant of your pistol doesn’t change and create awkward moments when it is at an odd angle and holding your shirt / overgarment up.

I had a single-point attachment holster for a few years and it was OK, but I was always reminded of when I was carrying and had to keep readjusting both the cant and the location on my belt as I sat down / got in and out of vehicles etc.

I wore this all day in blistering 98 deg F North Carolina heat and was completely comfortable. Highly recommended.

Alien Gear is the best for IWB concealed carry. Super comfortable while standing, walking and sitting. Even while driving these are comfortable! Im a loyal customer for life

I like the holster just fine. It holds my pistol well. I do however like my holster to be a deeper tuck. I’m not sure if it’s just me or what but the holster I had before this is a cheap leather iwb.

Well maybe not so cheaply made but in cost it was actually cheaper than this holster I purchased here. It however is oddly enough a quality leather holster. I bought it originally for my SD 9VE but prefer to carry the smaller shield I carry now and it fits well like the bigger pistol.

I’ll have to do a few photos and vids to show what I mean but overall I like this new holster. However i feel that I’m wearing this holster when I can almost not notice I’m carrying my leather one. I do like this one very much but it feels oddly high to me is all.

I’m sure it’s just because it’s different for me is all.

I didn’t know anything about the holster other than it fit my sw 380 shield ez. When I received the holster I note it was made of some kind of plastic. I feared it would remove the finish on my new gun.

I noted it made a few scratches on my gun and decided it wasn’t for me. Here’s where the COMPANY really was good to me. They sent my money back to my credit card before I actually returned the holster.

They sent me a return postage e-mail. I sent the holster back, would have bought another one but they had no other one available. Trust them, they do and mean what they say.

Holster fits perfectly. Couldn’t ask for a better fit. Will order More holsters for the rest of my many pistols. Low profile, great price, and present no printing whatsoever. Only thing I wish for is that you guys would make Camo an option for all of your holsters.

I will spread the word to all of my MARINE buddies. We all have quite a LARGE selection of weapons. The quality of these holsters are unsurpassed! My Thank you so much. Happy Concealing! Semper Fi.

I have a Ruger LC9s and I really wanted a Paddle holster that had a quick release on it. I had spent much time on the internet looking at different types and brands. After much consideration, I came across this Scorpion model and was a little hesitant because of the low price but this fit perfectly ! Light weight but made well.

I now use this as my concealed carry and I would not trade it for the world. This is simply the best buy you can make if a paddle holster is in your future.

The good news is that this is a reasonable quality holster that can be used for several different models and manufacturers of semi-autos. The bad news is that the P226 and P225 that I have tried fit a little more loosely than what I would like, but that is the trade you make when you go with a holster that will work with several different models and makes.

It is exactly as I thought it would be so I was not surprised. If you want a better fit, you need to go with a factory holster or a higher quality one made specifically for your model.

The Holster and The Mag Carrier are both nice solid construction. My G19X fits great and smooth in and out. The price for the quality is in my favor. I shopped everywhere locally and could not find what I needed or wanted.

Scorpion Tactical had exactly what I wanted and have been looking for at a great price. The delivery was fast and overall no regrets.

I had been looking for an IWB holster for my gen 1 Baby Eagle/Jericho compact for awhile. Stumbled apon this and figured I would give it a shot given the price. I was pleasantly surprised on how nice it was when it arrived.

My pistol did have a little play in the holster, but was to be expected as it wasn’t built for it. I was also glad the holster didn’t interfere with the slide mounted decocker. The adjustment of the retention is great as is the cant.

I took a heat gun to the top/slide edge of the holster and gave it just a little pinch, the gun now fits tight in the holster. The holster is about a half inch longer than the end of the muzzle, have not decided to trim it yet.

So, this is a long review for a holster that wasn’t built for my gun. I can only imagine how well it would fit one it was actually built for. But, if you are looking for an inside-the-wasteband holster for an old steel framed/no rail Jericho or baby eagle I would recommend giving this a shot.

I should have gotten one of these a long time ago. It has a very affirmative snap and retention that can be adjusted. It appears to be quality made. This is not actually a carbon fiber holster, but rather it just has a fin carbon fiber layer on the exterior.

The only complaint that I would have with it is that it rides high compared to what I’m used to with a crossbreed super tuck deluxe on the lowest setting. However, I’m carrying a much smaller gun with this p365 so it’s not really a deal breaker.

This might be a problem if I was carrying a bigger firearm. I added a picture with my shirt tucked in so you can see how I had it rides. This fits tactical belts but also works fine on normal with leather carry belts.

I have one of your IWP holsters for my SW Shield for about 5 yr now it is fantastic. I just got a new gun SigP365xl I accidently ordered a holster for std 365 You allowed me to return for even exchange n/c.

I just started using it right out of the package slight tension adjustment. Put it on perfect fit perfection in carry. I love your product Recommend it highly to everyone I know who carries. Fabulous holster fits great comfortable all day use no movement no discomfort ease of draw.

slight contour makes it fit close to the body. amazing could not be more pleased. sorry no pic. customer service in returning the wrong size to get the correct size and the help, everything is first rate.

Great company Great product. 5 stars.

I do not carry a Beretta 92 or M9 as an everyday carry pistol. Personally, I prefer a. 45, and the Beretta is a real boat-anchor, a very heavy pistol. I wanted a protective holster that would allow me to carry cross-draw, and this is it.

It is reasonably priced and gives you a variety of carry options. It is not a Bianchi, but it’s not $100 either. The price is good for the quality. ERSJR.

bought this for a 327 magnum j-frame. not the snubby so I had to look around to find a holster. This one was the only one I found over an extensive search that listed the 3 inch barrel length. I looked it over and for the price I couldn’t not try it.

when it arrived I inspected it carefully and was duly impressed by the fit and finish of the holster. slid the revolver home and it was a perfect fit. tried it in all of the four postions advertised and they all worked.

I use a heavy belt with a metal inset for carry and had no trouble with the size of the belt slots. the retention is great and very secure. I have no fear of loosing the weapon no matter what activity I find myself doing.

I carry in every situation public, recreational, around the house, yardwork and this holster makes it easy and comfortable to due so. will be purchasing another soon as I can.

Good fit required backing off the tension screw to allow the handgun to fit deep enough for the thumb-break to be engaged. Well-sized belt slots required no stretching and inserting a belt was easy. Only complaints are the delivery was delayed twice, and the holster was for a 4″ barrel rather than the shorter length I ordered (I can live with that).

I’m giving this signature holster a 3 star review for a few reasons which involve bad design flaws which led to a failure. I would have given it a 2 star but the good customer service at Bladetech inclines me to give it an additional star.

My holster which I purchased in 2019 was only used a hand full of times per year for approximately 3 years at shooting competitions uspsa style. It had carful light use, nothing that would have warranted for it to rip open and completely break apart like a clam at the seam.

I will try to provide photos if this system allows me. The design is a one piece cast with 2, 1 millimeter or less thick spots where they bend it to make the holster. that tiny piece which is holding the entire holster together is not sufficient to withstand even light use let alone real life dangerous situations.

I contacted Bladetech about it, they covered it under warranty however I had to show proof of original purchase, photos, explanations on my use and a few other details. they charged me for shipping and quickly sent out a new signature holster.

I wish they would have given me an option to pay the difference and upgrade to the original holster which I believe is better quality (not sure how the construction is where the 1 millimeter bends are however).

for the most part the signature holster does its job well, it retains the pistol, and you can adjust the retention tightness. I like the adjustability of the whole system and all the attachments that come with it.

because of the good customer service I’m giving this signature holster a 3, but Blatetech needs to find a better construction solution for the thin wall where they bend it, because it is prone to ripping open and I’m sure my new signature holster will fail at that spot as well.

So first things first I love the total eclipse 2. 0. Truly. easily my favorite holster ive ever had Its comfortable. when used IWB at the 5 o clock position the weapon is invisible even in relatively form fitting shirts.

the mod lok is inspired. I run the belt clips exclusively but the ability to flip the clips around and switch from OWB to IWB in seconds is brilliant. The only real gripe I have after about a month of use is that the mod lok system is creaky.

When I move you can hear audible creaking noises from the belt clips flexing in the mod lok groves, but at the end of the day this doesn’t impede the holster at all and it doesn’t really bother me but ill still probably try to figure out how to make it not do that.

There is a real issue with the Sig 228/229 version of the total eclipse though. The RMR cut on the Sig 228/229 model isn’t deep enough to actually accept a sight bearing Sig 229. I own a Sig M11-A1 (basically the government model of the P229) and I also own a P229 Legion RXP which has a Romeo1Pro on it from factory.

Unfortunately even though the holster has an RMR cut, it still forces the slide out of battery when the legion is holstered because the cut isn’t deep enough down the holster to not hit the sight. Now this isn’t really the end of the world since it is back in battery once drawn but it is a bit annoying that the weapon doesn’t have positive retention since its fighting the slide spring when holstered.

My M11, however, fits perfectly and doesn’t have these issues and since the M11 is what I’m carry on a daily basis that’s what I really cared about when buying this but its worth mentioning for anyone who does carry with a sight.

The new design of the belt clips is disappointing because you can’t customize the cant as much as you could the older style. Even if you pay more for the FBI cant, the new style doesn’t allow you to put the holster on while already wearing a belt.

You have to remove your belt with almost all of the new belt clips in order to put the holster on or take it off, with the exception of only one set of the clips. However, that one set doesn’t allow you to modify how the holster is canted.

So either you get the cant you [might] want or you remove your belt every time you need to remove the holster. I constantly have to remove mine to go into places that don’t allow weapons and I don’t want to have to get undressed in the parking lot to do so.

This new design is a step back in my opinion and I wish I had the option of getting the older clips that came with my Sig P320 holster I bought a couple of years ago. I now have a couple of belt clips that I paid more for in order to be able to customize how the holster is canted that I will never use because I can’t easily take the holster off or put it on while I’m dressed.

I really only bought them because the pictures on the site were very limited on how the holster attached to the belt. Had I known that this was going to be like this, I would have purchased something different.

Honestly, they messed up a perfectly good holster with the new “tool-less” design. Aside from the actual part that clips to the belt and the loss of cant customization, the kydex holster itself is still a very good holster.

Maybe I can remove the belt clip assembly altogether, throw some velcro on it and velcro it somewhere.

I’ve had firearms for decades, but am new to carrying one outside the house. I also am not rolling in money and didn’t want to go through a dozen holsters finding something that works for me. I spent a month researching everything I could find on what to look for in a holster.

Reviews, tutorials, body types, positions etc. The bottom line is I had this preconceived list of characteristics and features that I REALLY needed a holster to have. My first was an OWB paddle holster for my M&P 9 2.

0 compact (3. 6). It was everything I’d hoped. All the stuff everybody said to look for in a kydex holster, it was. 🙂 Great fit, adjustable positive retention and still easy to draw, great build quality and lifetime warranty.

Very happy. 🙂 i now have three. One IWB I use as a vehicle holster I rigged up to the seat in my truck. Good stuff at a reasonable price and very fast shipping. No company made up of mere mortals is perfect.

i feel for the folks who didn’t get their order shipped as fast as they’d like, but clearly this is the exception and not the rule. I don’t hesitate to recommend Concealment Express whenever the opportunity arises.

After using the holster for about a week I finally obtained adequate retainment by tightening down the crushable rubber spacers. The retainment is similar to other Kydex holsters. The paddle is another matter.

The paddle does not adequately attach to the the trouser and belt when the belt is not tightened. Twice while lowering my trousers the holster came loose and with the gun in it fell to the ground. The paddle does not sufficiently attach to the trouser and belt.

For this reason I feel that this holster is unsafe. I DO NOT RECOMMEND this paddle holster for purchase. If possible I will return this holster to the seller.

Pretty much the perfect paddle holster. Very slim and close to the body. Adjustable cant! Very secure hold on the weapon with a smooth draw and audible click when re-holstering. Comfortable and secure on the waist.

I’ve always liked Fobus , but this holster is much better, cheaper and made in America! Ordering was easy and very fast delivery. Will probably order one for another handgun.

This was my first experience with a plastic holster and I’m 77. I bought one of these for a Taurus G3C. The first time I put the pistol into the holster if fit so tightly I could barely pull it out. There is an adjustment buy the muzzle and after adding a few washers I finally got it loose enough easily remove the pistol.

However, after a few days carrying I noticed that the hard surface of the holster was beginning to mar the finish of the pistol. I eventually got a leather holster from another manufacturer. I do not recommend these type holsters and would never buy another one.

These are great holsters. I had received a G2c holster and just got a Taurus G3c so need to replace. The holster i had received two mos ago fits only G2c and earlier models. Well, called Amberide, they immediately sent me free return label and put in order to replace it with newest model and gave me tracking no.

for it. No other companies that sell holsters that I know of would do that. Amberide went the extra mile. THANK YOU. youve got a customer here for life.

The firearm fits perfectly in the holster. Unfortunately the holster clip does not stay secure to any pair of pant or belt options I have. Anytime I try to unholster my weapon, it just pulls the entire holster with it.

Rendering it useless. 1/5 probably will sit in a drawer and not be used.

This is a very comfortable fit for an IWB holster that with the added claw does an incredible job of reducing printing, even with a light t-shirt on. I also enjoy the fact that the ride height and cant can be adjusted.

If you wear a standard width military tactical belt, you’ll want the larger belt clip as well. If this thing had a pad, it would be the best single holster in the market in my opinion. I carry my pistol in at the apex and it’s very comfortable.

The pistol grip is strong and I never worry about the pistol falling out, and the ability to quickly pull the pistol out is great. I enjoy the fact that the safety on the pistol can be kept on as well.

I’m 5’10” and 190lbs and I have no comfort or accessibility complaints at all.

The holster provides a range of angles and a very strong retention hold despite being very minimal. After a little adjustment I am now able to carry my firearm in the appendix position all day with little discomfort, even while bending over to tie shoes etc.

I opted to add the Claw feature and highly recommend it to everyone. Combined with the adjustable angle, the Claw allowed me to find the optimal fit so that there is zero printing except in the most extreme positions.

The single belt hook is very sturdy but allows for quick removal of the holster when required. I am very pleased with this purchase overall.

My EDC is a SW Shield Plus 9mm. I normally carried it in a Black Point Tactical IWB holster. As a prospective dealer for Rounded, I ordered their IWB holster for comparison. I found the Rounded as comfortable as the BPT I was using and have carried with the Rounded holster since.

Good feel, easy draw, and very good concealment and comfort with the holster. I sold several of Rounded’s holsters at the last gun show for various gun models. It’s a very good holster for the price point!.

Honestly I did not expect this holster to be as good as it is. I have checked out the ones they have a gun shops and they’re nice and all, but VERY expensive. This product was just as good but for a lot cheaper.

And the belt clip is very solid. It hold onto your belt/pants really good. And I love the way that it fits my pistol. I got another one from a different company and it did not secure my pistol at all.

It would literally come out from just walking. And this one is comfortable and sleek. When I have it on me you can’t tell. So far nobody has noticed it when I carry it and it’s been a solid month of daily use.

HIGHLY RECOMMEND!!!.

Have purchased these in past, one for me and one for my wife and we both were very satisfied. I decided to 2 for my daughter’s and with them being plus size young ladies, they are very satisfied as well with the design and how very comfortable their IWB holsters are.

We carry Sig and 3 different types of M/P shields and the holsters function very well on all of these. Would definitely recommend to a friend.

Great, comfortable holster to wear all day, even if driving. Only flaw very, very tight retention so had to take a hairdryer to it to adjust to desired retention. Will definitely purchase again for other firearms.

I’ve been trying to find a holster for my Subcompact S&W 40 for awhile now. No one could help then I found Rounded Concealment. Did they ever deliver. Firearm fits perfect. Quality is amazing. I’ll be buying more holsters from them for sure.

Thanks.

Had previously used this brand holster in a professional role, but not with a paddle and slightly different lock release. Very snug weapon fit, but not too snug (it is adjustable). ALS action is very intuitive; one fluid motion to grip, release the lock and draw.

This particular holster was recommended by an FBI and former SWAT team friend for CC. I was skeptical at first; thought it would be bulky and visible, considering it’s worn outside on the hip (paddle inside between underwear and pants, holster outside pants, held by a mechanism that hooks under the belt to hold holster in place while drawing).

Wore it around the house all day to see if my very observant wife would see it. Passed the test. Had been warned that I’d likely try four or five holsters until I found the proper holster to fit my needs.

Not so; got it on the first try. Buying one for my son.

I have not tried this exact one (although I bought it) but I have tried the same holster made for a Kimber 1911 with 4 inch barrel. * I bought this holster mainly to afford myself good retention for those rare days that I open carry.

I think Safariland has a corner on the retention market. The locking mechanism hangs up on the “lightening cuts” in the Performance Center slide but this is easily corrected with 5 lengths of electrical tape over the cuts and I wish the weapon did not have those cuts! *They do look very wild though and appear to be a selling point.

*The holster is not advertised to fit the S&W 1911 at all, so it’s another plus that it does. I assume all 1911’s are more or less the same shape so it would probably work with other 1911’s. If I wanted, I could cut part of this holster down and use it alongside the shorter 6378 I have been using.

The suede lining does its job, draws are fast and easy, and 1-handed reholstering is a breeze. The paddle holds to my 1/4 inch thick “gun belt” very strongly, once put on correctly, if someone grabs the weapon and pulls upwards, they end up trying to lift my whole body as the weapon will not come out without the locking lever pulled down.

🙂 The only downsides to this holster are the following: it cannot be adjusted for cant and when putting it on, my pants want to slide down with the paddle. It also rides rather “high” but that does allow for better concealment without the need for a long cover garment.

Although not advertised to fit the S&W E Series, it fits quite well. I like this holster so much I have found excuses to open carry more. 🙂 I wish Safariland made it for more weapons (Browning Hi Power!) but they have to make what sells.

Bottom line: if you are looking for a holster with excellent retention and you carry a firearm Safariland makes this holster for, it’s a great buy. The price is excellent also. Like me, you can learn to live with the high ride and cant.

*Apparently the belt loop attachment was not meant to be used with a “gun belt. ” My gun belt is 1/4 of an inch thick, about twice the thickness of a normal belt. The paddle will move along my belt though for some location adjustment.

I love this holster! I have the coyote tan/FDE colored version of the 6378. but this is for the plain black, which is the best, especially if you have to use it professionally. The model 6378, for the Glock 17/22 can also be had with Safarilands proprietary fabric wrap.

The fabric is for disruption of color to promote style camouflage. But in my opinion paying nearly $100 or more for the 6378 ALS USB(the multicam version) is silly. Buy the black one! This one! And then get a QLS fork so you can swap it between belts and plate carriers.

awesome holster! It clicks upon insertion. And is easily released with the thumb using the SLS nub. It is extremely secure, holds close enough to the body for Concealment during winter coat weather. Is retained well enough to wrestle someone and not lose the weapon! The Safariland STX and SafariSeven materials are some of the finest quality polymer products that are available.

The Safariland ALS is the best auto-locking holster ever invented. And is only rivaled by the SLS(Self Locking System, -which is the hood,) and the ALS has the modularity to be installed with an SLS if needed.

Making it a level 3 holster. This holster as stands is a level one retention It has a sentry knob which can be purchased from Safariland which turns it into a level 2 retention holster, and tightening the tension screw in conjunction with the faux safari-Suede lining, which makes its so the gun must be drawn straight from upward only,(and protects the finish on your Glock! Buy this holster.

Changes the feel of the gun in a great way. Very good ergonomics and great grip. Gives a great bit of more control over the firearm. I’m with Talon grips the whole way.

The grip is very nice and does what it is intended to do. I found it easy to install as long as you follow directions. I will say if you carry IWB you might want to go with the rubberized grips because it is a sandpaper material and it does grab your clothing causing you to print at times.

I find myself constantly having to adjust my shirt because of this. I would definitely recommend this product for all of your non-carry handguns.

Although I’ve used Talon grips in the past, these latest ones do not seem to have the same amount of sticky glue as the older ones. Even after thoroughly cleaning the gun with alcohol swabs the grips did not want to adhere without adding a little bit of glue.

Previously, I was not a regular concealed carry person. I am in my 60s, overwight and the most comfortable way to carry was OWB which was concealable in winter outside but not so much indoors. I saw the ComfortTuck on youtube and decided to give it a try.

I ordered one for my M&P Shield. I received it in about a week, put it on at the 4-5 o’clock position and wore it comfortably the first day. I now conceal carry at church, shopping, driving in my truck, and pretty much everywhere except when I am working out of my home office.

By having a quality gun belt, and pants with a waist size 2 inches bigger than normal, I can wear the ComfortTuck all day. I also turned around a purchased another for my CZ 75D PCR Compact. This is a much heavier gun but I can still wear it all day, although I will say the shield is much more comfortable due to the much lighter weight, but both work fine.

As we come out of Winter in Missouri this will be my main carry option until winter comes again. I am very happy with my choice.

High quality materials are used throughout. The leather against your body gets more comfortable with each use. The comfort leather shapes to your body. The holster grips my Masada and holds it in place even in a run.

I am a bigger dude and have tactical love handles and I wear this at my 430 position. The pistol is quick to draw. Even with the combat cut to give you a dater draw the pistol doesn’t touch your skin.

One of the other great features I tried out was the adjustable clip height. You can lower the holster position to bring the pistol grip closer to your belt. I could super conceal my full size pistol by using the adjustable clips.

The more I lowered it the harder the draw. So I adjusted back to the best fit where it offered the best draw and concealment. I highly recommend this holster for EDC. I WILL 1000% recommend Vedder. The fit and finish, ingenuity, use of high quality materials there is really no better choice.

Have been wanting to get the Rapid Tuck for quite a while since I already have two light tucks that I am extremely happy with. But unfortunately it arrive with the wrong belt clip, it was shipped with the long clip.

Adjusted at the same position as the light tucks but when I went to draw my 365xl my knuckle would scrape the clip. Fortunately Vedders customer service is second to none, and Rachel in customer service whom I spoke to realized that the wrong belt clip had been installed and had one on the way asap at no charge.

After installing the short clip I began wearing the holster on a daily basis. I can say that this Rapid Tuck is the most comfortable holsters I’ve worn, retention for a hybrid is outstanding. I ordered the the holster with the upgraded horse hide and dark earth kydex, looking forward to years of use with my new Rapid tuck.

Would highly recommend this holster to anyone looking for a comfortable reliable holster.

Excellent for different carry configurations. Sturdy and comfortable for everyday carry. I carried a sidearm for a majority of my 30+ military career as both a primary and a secondary weapon, and have tried and experienced many different holsters, both for combat and garrison.

Alien holsters are for the discerning. Well put together in every way. If you need to duty-carry the L2 thumb-lock is nicely designed. With the way things are going in this country, I would not dismiss this as a possible configuration when out and about while conceal carrying.

The bad guy is getting bolder and the innocent man is a new target! They are eyeing you up to see if you are carrying, and will try to take it from you. Currently, I prefer OTW high carry with L1. Many of my buds prefer appendix carry and are happy with the Alien configuration for it.

This holster’s configuration for both are – surprisingly – extremely comfortable (but don’t forget there is no perfectly comfortable while carrying), I was so pleased with it, I bought another complete kit for a larger pistol.

My overall rating for this piece of equipment is as follows: Well done, Alien!.

Best IWB holster Ive ever had. This holster was recommended by a friend. I was buying a new Sig Sauer P365 so I thought I give it a try. It is so comfortable, you hardly know you have it on.

I recently purchased the Smith & Wesson shield plus bundle that comes with three extra magazines and a bug out bag. The magazines that came with the pistol in the box work perfectly the flush mount and the 13 round magazine.

The three magazines that come as a bonus with the bag for some reason do not work in the pistol they do not eject when the magazine release is depressed they fail to activate the slide lock and if the slide does lock open it will unexpectedly rack forward without being touched.

I took a digital caliper and measured all the magazines, the magazines that came as a bonus in the bag were wider than the magazines that came with the pistol in the box. That would explain why the magazines will hang in the pistol when the release is pressed.

Not sure how this can be fixed other than sending them off to Smith and Wesson and hope for a replacement. This is not the way I wanted to start off with a new pistol.

Unfortunately, one of my magazines fail to lock back after the last round and does not drop freely like the others (I bought 4 of these and one does not work properly). Once partially/fully loaded, it feeds fine.

Just won’t lock back when emptied and won’t drop free. I’m no expert at all but it looks like the follower sits noticeably higher on the defective one. Might be a spring issue. 75% is decent, but as a buyer, you expect 100%.

So I had to knock some stars off. Still, these are hard to find so take your chances if you need some. The mag isn’t completely useless, for what it’s worth. I will probably just mark it so I know which one’s got issues.

Disappointed because they are $40 a pop and QC should be good enough to ensure basic functionality so buyers don’t get stuck with lemons.

Bought my M&P Shield PLUS pistol in January 2021. Since then, I am not sure why these 13rd magazines are really hard to and are always OOS in other website. I finally got a BACK IN STOCK noticed from Sportsman’s Warehouse this morning at around 7am Pacific Time.

I didn’t hesitate and bought 4 each of these S&W M&P Shield Plus 13 rd Magazines. Now, I will have six (6) total 13 round magazines include the one (1) 10 round magazine that came with the Shield Plus.

Don’t need to keep reloading the same 13 round mag in the range now. YAHOO!!! I wasn’t surprise when I check the availability of these 13 round magazine to be out of stock an hour later. I’m just super happy that I got a change to snag five (5) of these 13 rounders from Sportsman’s Warehouse.

YAHOO!!!!!.