Key Features Perfect upgrade for brushed 540- and 550-size brushed motors with the same diameter and mounting pattern (vehicle must accept pinions with a 5mm bore) High-quality 4-pole sintered rotors Includes 4mm gold plated bullet connectors Precision ball bearings and hardened steel 5mm shaft Overview Great choice for 1/10 Scale 4WD models.
Low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing, insulated high purity copper windings, high-quality alloy steel 5mm output shaft, and high-precision bearings for high durability and smooth rotation.
Preinstalled with 4mm gold plated bullet connectors for easy installation. Perfectly matched for the Firma 130 Smart ESC. Needed to Complete Electronic Speed Control such as the Firma 130 Smart ESC What’ s in the box? Spektrum Firma 3660-3150kv Sensorless 1/10 Brushless Motor with 4mm Gold Plated Bullet Connectors.
This is a top of the line motor, these motors are great for your RC’S. My husband went through several of the other motors, dew to shaft size. The spektrum motors have a thicker shaft, which holds up better the 5mm shaft, is incredible.
It was at an amazing price, that made it incredibly affordable.
This motor is designed for use with the TBLE02S ESC unit supplied as standard with many current kits. It’s a high RPM 10. 5 turn rated motor. For use with the ESC a sensor lead part number 7804088 must also be ordered if you don’t already have one.
Tamiya is well known in the RC world for their well made products, and this one doesn’t miss the mark. This motor pack a punch be it in low turn or high turn, as a great feel to it while triggering the throttle, and handles well in term of speed and torques.
I would recommend it for any on road application. If high speed is what you are searching for i’d recommend the 10. 5 T which use exactly the same components. As a last note the motor is also timing ajustable which helps when racing for even more tuning options.
Bought for my DT02 – was OK with standard gearing, but put 19t pinion in and car was transformed! Not as high revving as a fast brushed motor, but massive torque giving super acceleration. Another bonus is that batteries last twice as long as with the old 21turn brushed motor.
Works fine with the standard Tamiya TBLE02 ESC. Plus, the motor is fully sealed so keeps all the dirt and grit out of the motor – essential when off road racing. Worth every penny!.
The Drag Slash is designed for one thing – Drag racing. To provide the ultimate in accelleration and top speed, it’s been engineered with features and innovative solutions to win at any level of skill or experience.
With incredible speed and highly detailed look the Drag Slash is an incredible RC dragster.
Designed to easily handle the rigors of high-power multi-terrain RC driving, this is the ultimate power system when you need access to speed and torque with every transmitter input. Waterproof and styled in stealth black finish, striking looks and all-weather performance are standard.
Capable of pushing your vehicle beyond 60mph, with optional gearing and in optimum conditions, the BLX185 power system provides a 150A 4S-6S LiPo power ability, straight from the box. Features The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with our BLX185 ESC unit.
A beautifully etched black aluminum motor can provides a premium look, whilst a 4 pole internal configuration keeps the power supply smooth and consistent. Gold bullet connectors provide fast and easy wire removal when you need to clean down your vehicle.
The aluminum motor can provides increased heat dissipation from the finned body section. A dual motor shaft flat section provides a safe and secure pinion gear fitting.
Very good motor! It runs about the same temp as my 2200kv Hobbywing. I am impressed with the torque. Only a 2650kv could make my 1/8 scale buggy pull a wheelie on a dirt track. Until now! This baby did it too!.
Really screwed up my motor when I broke off my output shaft. Looked everywhere for replacement internals, but came across this instead. This is an absolutely perfect, unmolested motor. Not a single thing wrong with it.
Front bearing is about to go on the 5th run. not sure if it was a factory problem or what but NOT HAPPY ABOUT IT! It was fast and I was impressed with it till I noticed the noise from the gears in the truck.
I’m just hoping that it doesn’t happen again because I bought 2 of them. Will see.
Precision balanced rotor, smoothness for best reliability and maximum RPM High strength magnets for unmatched brush-motor performance Excellent torque and long-run times Direct-solder wiring tabs for flexible soldering options Dual-ball bearings design.
Water-proof and dust-proof for all weather races Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.
Installed on a Redcat blackout SC. The motor does have a 5mm shaft, so the Traxxas motor gear(PN5644) is also needed. That took some time to figure out, but Ive done the hard work for you. Everything is holding up great after a month of steady use.
The truck is a complete monster with this and a 3S lipo. Best part is watching the tires stretch when you give this thing the juice. Just know that no ESC is completely waterproof. It will take splashes but do not spray water directly into the fan like I did.
That took it down for about 24 hours, LOL. I did the same thing with the stock ESC, and got the same result(Im a beginner). I would say that it does at least 50 miles an hour with this motor and ESC combo.
I have no complaints. Now I just put the ESC into a Ziploc bag, and I can hose down the truck.
This combo is stupid cheap. But you get exactly what you pay for! The ESC is not water proof and can only handle 3S if you gear your motor for more torque and less top speed! If you don’t the extra strain will blow this ESC in no time.
The motor itself isn’t very powerful for a brushless motor. It’s more in line with the modified brushed motors of 20 years ago. Keeping this in mind you also HAVE to gear these motors as if they were low turn brushed motors! Gearing them like a powerful brushless motor will cause these to overheat which in turn will burn up the ESC.
So overall compared to a modern brushed motor these are a step up in torque and top speed. But dont expect these systems to be anything crazy.
You might have heard it said that you can not teach an old dog new tricks. Well I am not an old dog. I started singing in church choir when I was eight. I joined band in order to learn how to read music and played the trombone.
I always thought I should have played the clarinet because I have very flat finger tips and short fingers. I purchased myself this clarinet and am now teaching myself to play. I got it assembled. Thank you YOUTUBE and have actually played a few notes on it.
The tone is much better than I would have expected. The supplied reeds are a BIT irregular in the cut, but other than that, it is all I could ask for. When I get better than this $61 clarinet, I might upgrade.
I am also teaching myself piano, violin, and mandolin. They all use treble clef music and I am having to retrain myself to read notes as treble clef instead of my very familiar bass clef. In short, a great starter instrument if you are not sure this is the instrument for you.
Midland Helicopters are one of the longest established model helicopters specialists in the world. Charges for super fast UPS deliveries into Europe have recently been lowered. UK 1st class minimum charge is £1.
50, up to £3. 00 for parcels up to 2 Kg. These orders are usually sent by Royal Mail Airsure or International Signed For (ISF). Items in excess of 2 Kg will be sent by UPS or Fedex. and will be charged at cost.
You will be billed in GBP. International orders may take longer. You will need to include a covering letter in the package stating the reason for return, and you might need to obtain a proof of posting certificate from your Post Office for us to be able to refund your postage costs.
Returns Address Please mark return parcels for the attention of the Returns Department at the usual address (in the footer of the website).
My 1/18 scale Losi Mini-T 2. 0 does back flips when I take the wing off. I velcro’d my iphone to the roof of my Stock Mini-T 2. 0 Brushless (which uses this motor) to measure the top speed with a speedometer app; Keep in mind my phone is an iphone XR which weighs about 7 ounces.
A lot of weight to strap to a 1/18 scale roof; It easily achieved 30mph in a bumpy parking lot with half a charge in freezing weather. It launched my iphone about 25 feet off of it and cracked up the back of it pretty good.
Basically what we learn from this is that the Mini T with this motor in stock configuration could maybe exceed 32-33mph. That’s so fast for the size.
Works perfectly, and quiet. Minor issue with a Mini-B pro roller, the only viable orientation puts the wires up against the body shell when it’s all closed up, so they need to be bent over at a somewhat severe angle.
EGODRIFT Tengu high-performance brushless motors for RC heli are the result of one year of testing and development. The 4025HS comes with a kV rating of 520kV for 12S LiPo batteries and is the perfect choice for your 550mm sized SAB Goblin, XLPower, Mikado Logo, Align T-Rex, Gaui or scale helicopter model.
The dipped stator is hand-wound with 1. 2mm high-temperature wire and delivers a continous power of 4000W (5000W Peak) at a continous current rating of 80 Ampere (100A Peak). The motor’s overall dimensions are 50 x 49.
6mm (1. 96×1. 95 inch) with a total weight of 325 grams (11. 464 oz). Various shaft options are available (please select). Like all models within the Tengu series, the top of the can features the iconic and heat-resistant EGODRIFT Stickerbomb print, to add the finishing touch to your 550 class heli build.
Each motor comes with mounting screws and an (optional) screw for additional securing of the bell.
I slapped this motor on my goblin 500. It fit pretty well. The motor wires are super thick and hard so it made soldering the connectors on a little hard. Also it will also be a slight challenge to shape the wires to run down the side of the frame.
So far i have flown it a couple times and it flies pretty smooth on 6s 4000 mah 60c. After flight, the motor was pretty warm to the point i couldn’t keep my fingers on it for long. So far I am liking the motor.
This is my first Tengu motor so I’m hoping that it will last for a long time.
This motor was purchased for a 12s Diabolo 700UL. It’s weight as listed on the Egodrift motor is a bit off and is a bit lighter in reality. In my application, it runs a bit hot, but apparently all the 40xx motors do.
Unfortunately i bought this for the bell and bearings for a 2200kv f80 pro I crashed HARD. First issue with these and they are very resilient. As with everything else, hard to find stuff so if you find a set in stock and need this size/kv, pull the trigger fast.
I Damaged my JB2407-7 2500kv Motors, Decided to buy it again but they were expensive as. Because I Live in Puerto Rico, the shipping was too expensive. So the 27 Jul, 2019, I Bought the T-motor F80 Motors and give them a Try.
BEST MOTORS EVEEEER! I’ve been Rocking These Motors throw Hell, Ripping all the Island and Crashing them In Every Spot I Have Been. They Are Still like New. T-motor F80 Unboxing, comparison, Install & First Flight.
Tons of power and they keep pulling. 4 is is super smooth, 6 s is kind of like having small tires with a blown big block. Just can’t get all the power to the props. Throttle control is key. Love these motors.
Toys play a crucial part in development of a child. Toys as simple as wooden blocks or numbered puzzle, develops cognitive and physical skills. Complex puzzles, remote control cars, bubble guns helps learn and analyse cause effects and spatial relationships.
Babies tend to play more and more with such toys and make themselves happy. Children’s attitude towards their toys nurtures them big way. Include: (1) Ezrun MAX6 ESC (1) Ezrun MAX 4985SL Motor (1) 8 AWG 200C RED power wire (1) 10 AWG 200C Black power wire (1) Double side tape (2) Heat shrink tube User’s manual A Hobbywing decal.
I bought this to replace my classic optima bumpers. Shape, color, and material is very similar however the mounting point is a bit different to the classic ones. It is still possible to install by using the available 4 screw holes under the chassis, its just missing the one big bolt upfront.
The heart of the s-plus is a thin leg stator that allows shorter wire lengths, resulting in a massive reduction in resistance. By reducing the motor’s weight, handling and chassis turning flexibility improves.
Machined parts such as the can, timing cap, back plate, and sensor assembly have been placed on a diet. An entire section of the front plate has been removed to reduce weight with an added benefit of allowing the user to re-position it to lower CG depending on which type of car It is being installed in.
A savings of nearly 30G has been achieved! Additionally, the motor’s length has been reduced by more than 2mm, which aids left and right Balance and moves mass towards the center of the chassis. An all-new high- strength, balanced rotor is more powerful that it’s predecessor.
Because the rotor is interchangeable with those in 540-m3 Spec motors, a wide range of tuning options are already available. Precision stainless steel ball bearings have been fitted to accommodate high RPM loads with exceptional efficiency and reliability.
High purity copper windings maximizes efficiency Precision engineered for maximum energy conversion High precision metal gear Suit for 1/16 1/18 scale RC car Mutiple protection features: Low voltage cut-off protection for lithium or nickel battery, Over-heat protection, Throttle signal loss protection, Motor blocked protection Motor Specifications: KV(RPM/Volt): 4500KV Max RPM: 60000 Max Current: 22A Max voltage: <13.
2V Max Watts: 300W Can Size: 2435 Can Diameter: 24mm Can Length: 35mm Shaft Diameter: 2mm Shaft Length: 12mm Connector: 3. 5mm golden banana plug Item weight: 56g ESC Specifications: Constant current: 25A Burst current: 90A / 10sec Battery: 2S Li-Po / 4-6S Ni-Mh BEC Output: 5V / 2A Power supply plugs: T plug male Motor plugs: 3.
I set my oven near 100 degrees Centigrade then i put the device above the vent. It spun very nicely for a few hours !! The airflow inside the pump encasing was so hot that it slowly melted down the main piston inside (cheap foam/plastic) My advice is : its fun until you get it too hot.
The motor housing is made from hard anodized aluminum, motor windings are wound from double insulated wire, the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets and the bearings which are implemented are high precision metal caged for a minimum to zero friction which in turn will guarantee strength, outstanding performance,high durability and smoothness of the motor.
High Efficiency The output performance of this motor has an efficiency of up to 85%. In the same load condition, EZRUN 2030 has the higher efficiency but lowertemperature than other 2030 motors. 。 Plug and Play Pre-soldered with high-quality gold connectors on motor leads,the EZRUN 2030 motor is definitely a plug and play.
The Team Corally Vulcan Pro modified class brushless motor series is a high performance motor line developed around trend-setting technologies. Team Corally’s R-D department only had the highest efficiency and maximum power in mind when they designed this line of high-performance motors.
The result speaks for itself: impressive performance, more power, more top-end, all while keeping the motor temperature lower. The motors are made with high grade materials and every motor is balanced using state of the art balancing machines.
Features: Precision machined T6 aluminum motor can High purity copper windings maximizes conductivity High power solder tabs Removable and replaceble rotor Powerful sintered Neodymium magnet Improved stator design for higher efficiency Dual Sensor Port Adjustable Timing Compatible with all Sensored/ Sensorless ESC Compliant with EFRA, IFMAR, ROAR, BRCA, DMC rules Power Specs: Poles: 2-Pole Windings: 10.
5T KV: 3450 # of Li-xx Cells: 1-3S Max. Current (A): 65A No Load Current (A): 1. 9A Tech Specs: Motor Length: 52. 4mm Motor Diameter: 35. 8mm Motor Shaft: 3. 17mm Sensor Ports: 2 Ports Adjustable Timing: Yes Weight: 165g.
This is the LRP ZR. 32 Spec. 4 Pullstart that is based upon the very popular ZR. 32. This leads besides an improved idle speed setting, also to better responsiveness and more torque. The already known Heavy-Duty CoolDown- Max cylinder head provides sufficient cooling for this power unit.
Impossible to start to break in. I couldn’t get more then a sputter from time to time. It was about 60 degrees outside when I was trying to start mine for the first time in my 4. 6 X Savage. Finally after wearing out my arm I put a Roto Start System on it and swapped it for a medium glow plug.
a OS #8 and after cranking with my HPI Roto Starter got it started. It ran horrible but it ran and I went through the tedious break in for 8 tanks of fuel. By tank 4 it was running and starting better but still a pain to keep going at times.
Be Patient. By tank 9 I leaned out the high needle one turn in and the low speed needle one turn and cannot keep the wheels on the ground! This engine is a Beast! It starts very easy now and simply has more power then I know what to do with! It is a ripping Beast.
So be patient. I suggest you warm your cylinder head with a hair drier for first time starting if it is cooler outside until this engine gets broken in or highly recommend a Roto Start for it. In the end you will be more then pleased with it! it is one of the best engines I have bought.
And I am a OS man. Very happy with this powerhouse of a engine! Also FOLLOW the Instructions! Use 25% fuel! I could not get mine to run well on 20%. it really wants what the Manufacturer suggest. 25%.
This Engine does not care how heavy your Savage is. It will make it ground pound like it was meant to do!.
I’ve been in the Savage nitro shocks for about 15 years I’m going to replace my 5 9 with this new lrp 32 my son has a l r p 28 the 28th is a nasty engine and itself why but the 32 almost puts out 4 and 1/3 horsepower that’s insane engine is lightweight and if it’s anything like my son is 28 it should destroy my truck in one season I’ve been in the nitro RC stuff for about 35 years now the price for this engine you’re not going to do any better I only know from my son’s engine it runs extremely well stays running and has a massive power if you purchase one of these break it in right and good luck I can’t wait to enjoy mine it makes you just waiting for the weather to break y’all have a nice holiday now outstanding! And younes broken in now this thing is nasty make sure you have the right differential and transmission because this engine will destroy your gears I had to put one in a 3.
I run this engine on a 38oz. dragster. This engine pulls really hard through the entire 132ft. From the slick outward appearance of the engine case to the triple-fluted crankshaft, this is one quality piece with a power curve and bulletproof durability to match.
Welcome the EMAX RS1606 racing motor series! A perfect motor choice for your 3in and 4in builds and also gives you enough power to carry around a larger HD cam with out sacrificing to much power. Get yours today!.
If you’re comparing these to top of the line motors then you may be hoping for too much. These are an economically priced motor. Expect performance based on price. I will say that for the price they do pack an unexpected punch.
I did notice that with stock betaflight settings they were a little warm but not anything concerning. Your fingers can stay on them with comfort. They do pull less amps then advertised but that’s due to the fact that static tests show higher amps anyways than flying through the air.
I paired these with a mamba mini stack and they’ve been a good combo. They are on par with some eachine 1507s they replaced. This particular quad will continue to get these motors.
Ran these motors for 5-6 packs with no hard crashes and I started to get heavy vibrations/jello in the video. When I checked the motors, a couple of them had wobbly shafts. I checked to see if they were bent and they were not.
I removed the c clip from the bottom and turned the bell around. The bottom bearings had all given out.
I put these on my 3in so I could try lifting a GoPro Session. It worked but I felt like I was pushing them too hard. Without the GoPro, these things have Awesome power. In fact, that drone is for cruising around my backyard and I had to go back to some less powerful motors because these were almost too much.
I’m running these motors on my diatone GT m and absolutely love them. in combination with extreme high pitch props these motors are phenomenal and never miss a beat super smooth super fast and super responsive!.
Over the last 4 years of fpv, I’ve tried a bunch of “name brand” motors only to find out its more about marketing and hype. Decided to try t-motors and for the first time I am so pleased with my purchase that I bought 9 motors to fit out my other quads (one is a spare motor).
Pricey?, yes! Worth it? Oh hell yes! Definitely my go to motors from now on.
Let’s start by saying thank you Pyrodrone for exceptional Customer Care and secure shipping. FAST AS Always that’s a given. I purchased these for Cataylyst Machineworks whoopmaster 4in. The quality of T-motors are bar none in my opinon.
WOW boasting, ripping, shredding, Ludacris speeds like I never experienced before. These remind me of f80 pro 1900kv I highly recommend these to all freestylers who wanna push further more and racers who wanna reach faster speeds in less time.
Dive into the impossible and not worry about recovering from it.
The all-new 2004 series brushless motor from BetaFPV is a smooth-running, powerful, and more controllable ultralight 4-6S motor, weighing in at only 16. 6g each, including wires. The 3000kV version is specifically designed for the 3” ducted whoop, any 4” drone and lightweight 5″ toothpicks, while the 1700kV is the best choice for the 6S power system found on 4- and 5-inch quads.
The 2004 brushless motor is a completely new, innovative and unique design that performs better than any currently available competitor. The motor delivers power in an entirely new way and will give you some of the smoothest flights and footage you’ve ever experienced!.
I had 2004/2700kv. But the motor destroyed its self. So I bought these even tho the kv Was 300kv more. With a 4s my 4″kwad ripped. From take off to land. Omg it blasted thro the air. Way better than I thought.
Not bad Lil motors. Not sure how they would handle in a crash when I darn tree jumps out at u. but not bad.
Excellent build quality. Good looking and near silent operation. A bit more “notchy” than the Brother Hobby VY 2004. Good value for what you get. Wish they came with screws instead of “C” clips on the base of the shafts.
Introducing the new VELOX V2 motors by T-Motor. The V2306 V2 1950KV motors come in a new and sleek design and are made with premium components to give your multirotor visibility and speed in the game! Great for freestyle and racing!.
Got these motors because I found that I was always bending shafts. Since I’ve gotten these motors, I have not bent any of them and they have been trashed. I’m going to keep getting these motors not because they are very budget friendly but they are very durable.
In 2022, being able to get a $15 motor with this combination of weight, quality and durability is unprecedented. For the money, there is not currently a better motor on the market. I have beat on these for months and only bent one bell.
The motor for no prep rc drag racing is very powerful and can reach speeds of up to 60 miles per hour. It is important to remember to always stay in control and be aware of your surroundings when operating this type of motor.
Dot 4 brake fluid is a high performance brake fluid designed for use in motorcycle brake systems. It has a higher boiling point than standard brake fluids, making it ideal for use in high performance applications where brakes are subject to high temperatures. Dot 4 brake fluid is also compatible with all types of brake…
There are a few supplements that may help to prevent or treat gastric ulcers. These include omega-3 fatty acids, probiotics, and vitamin E. 20 Best Supplement For Gastric Ulcers In Horses 1. AniMed 4 lb Ulc-R-Aid with Colostrashield. Nutritional Support for Horses Prone to Gastric Ulcers Product Details Specifications Reviews From Real Customers 2. Finish…
A WiFi 6 router for Verizon Fios is a router that uses the latest 802.11ax technology to deliver faster speeds, lower latency, and increased capacity for more devices. 20 Best Wifi 6 Router For Verizon Fios 1. TP-Link Archer GX90 AX6600 Tri-Band Wi-Fi 6 Gaming Router Game Band – Tri-Band structure provides a 4.8 Gbps…
A bed for back and side sleepers is a bed that is designed to provide support for the back and hips while sleeping on the side. The bed should have a firm surface to provide support for the back and a softer surface to provide support for the hips. 20 Best Bed For Back And…
A blank t shirt for screen printing is a shirt without any design or printing on it. This type of shirt is usually used as a base layer for printing designs or logos. Screen printing is a printing technique where a mesh screen is used to transfer ink onto a garment. This process can be…
Rice water for hair is a traditional remedy that has been used for centuries to improve the health and appearance of hair. Rice water is rich in nutrients and antioxidants that can help to nourish and protect the hair, and it is also thought to have detangling properties. To make rice water for hair, simply…