Best Load Boards For Flatbeds (2025 Updated)

75111-01A Ford F-150 (Fits: Lariat ) Hard-Wired Tags: Amp Research Nerf Bars Running Boards Exterior Truck Accessories Nerf Bars Running Boards Nerf Bars Running Boards Nerf Bars Amp Research Powerstep Automatic power-deploying running boards with a low-profile integrated led light system, standard.

Made from high-strength, die-cast aluminum-alloy components with an anodized and PTFE coated, military-spec finish to resist corrosion. With precision stainless-steel pivot pins for rock-solid stability and maintenance-free, self lubricating bushings for all-weather performance.

Extruded aluminum steps with full-length internal ribs for rock-solid stiffness, rigidity and support with a high-texture powder-coat finish for maximum grip and durability. 600 lb load capacity (each side).

Automatic lowering with weatherproof, oem-quality electric motors, drive system and wiring harness. Worry free pressure-sensitive, pinch-proof safety technology. Covered by a 5-year/60,000 mile warranty proudly designed and built in America.

The automatic retractable full-length running board. In less than 1. 3 seconds after opening any door, Powerstep automatically extends down providing a natural 10-12 inch step height. The step itself is wide and flat allowing for good foot placement, and in the lowered position, it extends outward 10-12″ allowing occupants to take more of a natural step in or out of the vehicle.

A no-slip textured surface allows for usage in all weather conditions. The AMP Research Power Step has been tested in a variety of environments and temperatures from -40F to +200F. Powerstep automatically presents a step assist low enough for children to easily climb in and out of the tallest trucks.

When all doors are closed, Powerstep retracts up and under the truck, flush with the rocker panel, keeping step surfaces free of mud, snow and road grime. POWERSTEP is a powerful solution to convenient vehicle entry and high ground clearance.

Invented, engineered and.

Extend-a-truck extender is designed for secure and safe hauling of long loads above or behind the vehicle. It features a 4in wide support and adjustable height for roof top hauling as well as bed extension.

This extend-a-truck can be stored flat behind the seat when not in use and comes with a red flag.

EZ Deck Semi-Trailer Step Ladder Heavy duty, all-aluminum truck trailer ladder for quick and convenient access to trailer beds. The EZ Deck Step trailer ladder is custom designed for drop deck and step deck trailer heights for fast load inspections, routine maintenance, and cargo load adjustments.

Secures to trailer deck rails with a pin clip May be secured with a padlock Built-in casters push ladder away from a trailer under heavy load Rub Rail Height is 3-7/8″ Rub Rail Thickness is 3/8″ Folds upright for transport and storage EZ Deck Step Trailer Steps are designed to attach to truck trailer rub rails for fast and convenient access to a flat bed, drop deck, or step deck trailer bed.

Each set of step deck steps use specially crafted pin clamps for attachment without tools. Drop deck steps include (2) C-Brackets which clamp to the side handles and secure the flat bed stairs firmly in place when stored in an upright position.

The EZ Deck Step Trailer Step features two heavy duty caster wheels which push the steps outward when the truck trailer is under a heavy load. Includes pre-drilled holes allowing the deck step to be locked to the trailer deck using a padlock (not included).

Works great as a drop deck or step deck step on trailers! EZ Deck Step transport stairs are made with lightweight aluminum designed to support up to 375 lbs while remaining light enough to be carried around between use.

The Martin pro-draft parallel straightedge kit is the premier item in its class. The only Parallel Straightedge Board utilizing an Anti-warp Aluminum body straightedge for strength, and stability. Each side of the unit has large knobs for adjusting the straight-edge to align with the artwork/drawing and stay parallel.

Equipped with a 6-position Adjustable stand; Board size; 23-inch by 31-inch.

Strong and Sleek Design. Amp Research answers the call with these PowerStep Series Running Boards. With a striking black powder coat finish to ensure safety with maximum grip, these running boards are as durable as they are sleek.

Teflon Tough. The military spec, anodized Teflon finish resists corrosion, while high-strength, die-cast, aluminum-alloy linkage components bring the durability to new levels. These boards also have a 600-pound load capacity.

The cherry on top? A standard integrated LED light system that will guide you in the darkest of backwoods trails at night rounds out this solid, sleek package that’s an absolute must-have for any Ram owner.

Electric, Direct-Fit Installation. Designed to bolt directly to the factory mounting points on your Ram, these electric boards instantly extend when you open the door and hide away when the doors close.

Made in the Usa, this pair of running boards from Amp Research is warrantied for 5 years or 60,000 miles. Application. These bolt-on, electric Amp Research PowerStep Running Boards with LED illumination are made to fit your 2002-2008 Dodge Ram Quad Cab or Mega Cab.

Choose from 1 of options above for the best choice.

All new decal sheet. Chrome plated parts. Vintage style packaging. Truck and beams not included. More than 150 highly detailed parts. Fully detailed plated landing gear crank. Check list with instructions and part names.

Paint and cement required (not included). Parts molded in white, unless otherwise indicated. Detailed scuff rails have open pockets for load tie downs. Rear suspension can be adjusted fore and aft to desired position.

Woodgrained trailer bed extends from 19. 1875 to 31. 1875 inches. Front landing gear can be built with wheels or sandshoes. Snaps in up or down. Front bulkhead detailed with grab handles. Rugged structural detailing and removable.

Chromed spoked wheels, detailed “Goodyear” tire. Wheel assembly snaps on to axle. Spare tire included.

Featuring heavy duty, reinforced steel diamond plate, bright yellow welded curbs, and underside dock supports for stability. Each dock board is rated up to a 13,000 lb. capacity with a 4,000 lb. forklift for loading, and is tapered for smooth transitions from dock to truck.

The high visibility, bright yellow welded steel curbs on each side help to line up forklifts during docking. Each dock board also features two underside stabilizer braces that line up with an existing loading dock to provide extra stability and keep the dock board safely in place during use.

Included with the dock boards is a heavy duty chain and nose-clamp lifting system to easily move the dock board to and from the loading dock area. Dock boards are available in a variety of lengths, depending on application, in 60″ and 72″ widths.

It’s recommended to choose a dock board 12″ to 18″ wider than the widest load that will be on the board. To calculate the minimum dock board capacity required per application, multiply the fork truck lifting capacity times three.

Unloads any pick up truck in 30 secondsThe Loadhandler Pickup Truck Unloader quickly turns your pickup into a dump truck to save you time and reduce stress on your back. This easy-to-install Loadhandler has adjustable brackets that belt onto tailgates 60-69in.

W and up to 4in. thick without welding, cutting or drilling. Just load up the drag sheet, then use the crank system with heavy-duty roller bar to deposit a full load of rock, soil, mulch, firewood or feed in 30 seconds.

Loading Zone cargo gates are easy to install. No mounting hardware or expensive track systems are needed. Simply lift, lock and load for the most professional cargo management system available today.

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a microbrushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure.

Feature for feature, Homeline panels outclass the competition. With new and exclusive features, Homeline is the smart choice for value and performance-minded contractors, remodelers, builders and homeowners.

Straight-in mains design helps reduce the need to bend service cable, cutting waste and saving installation time. Convertible mains let you meet changing job site requirements by field converting main breaker load centers to main lugs or vice versa.

Interior is easily removed for paint or theft protection during rough-in. Single, captive screw can’t be lost; interior mounts quickly and easily. Split branch neutral with up to 50% more terminations than required.

Reduces clutter and simplifies wiring. Combination slot/square-drive neutral ground and cover screws let you use either standard flat blade screwdriver or square-head driver for reduced slippage and improved torque.

Improved bus and interior assembly is among the most rugged in the industry. Three ground bar mounting locations (left, right, bottom) let you pick the easiest spot to wire. Tangential main service knockouts eliminate the need for costly service conduit offset, simplifying and speeding installation.

Complete load center rotates for top or bottom feed to meet job site requirements and reduces service cable waste.

The Square D by Schneider Electric Homeline Value Pack 100 amp 20-Space 40-Circuit Indoor Convertible Main Breaker Load Center for Plug-on Neutral breakers includes the cover, a selection of breakers and is UL listed for residential and commercial power distribution.

This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners.

Homeline load centers are engineered for fast installation and wire savings.

The Square D Homeline 125 Amp 8-Space 16-Circuit Indoor Convertible Main Lugs Load Center with cover for Plug-on Neutral breakers is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers.

Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

The Homeline load center offer features Homeline circuit breakers, ground fault circuit breakers and arc fault interrupters. Homeline load centers enable the use of a full complement of accessories. Systems are single phase and are rated for indoor use or are rain proof.

Homeline load centers are designed for residential and industrial use to protect electrical systems, equipment and people. This Homeline load center is supplied with convertible mains that are rated at 125A 120/240 VAC single phase.

Homeline load center provides a 10 kA breaking capacity. The electrical connections are box lugs. The box lugs will accept a wire range of 6 AWG to 1 AWG copper or 6 AWG to 2/0 AWG aluminum wire. This Homeline load center has a height of 17.

92 inches, a width of 14. 25 inches, and depth of 3. 74 inches. Homeline load centers are UL Listed.

Tow Tuff’s TTF-72TBE Steel Truck Bed Extender is the easy way to extend your truck bed by up to 3 feet. Transport ladders, small boats, drywall, canoes, lumber, and so much more with the convenient bed extender.

With the ability to hold up to 350 lbs. , this bed extender can handle a wide variety of loads. The extender easily attaches to 2” Class III and IV receivers. Adjust the height of the bed extender in 1¾” increments from 15” to 22”.

The width is also adjustable at 48”, 60”, and 72”. Tow Tuff’s Truck Bed Extender is constructed of heavy-duty steel with a powder-coat finish, giving you a durable and long-lasting product that will resist corrosion.

The bed extender is easy to remove and store in compact spaces, giving you less hassle. Safely and easily secure long loads!.

No folding straight steel loading ramps are rated for 1000 lbs. per pair and are 72 in. L and 9 in. W. Great for loading ATV’s and motorcycles and much more. Anti-skid surface prevents slipping, ramps are Zinc plated to resist corrosion.

Minor assembly needed for mounting end plates.