20 Best Jacks For Lifted Trucks (2023 Updated)

Perfect for me. I was looking for a heavy duty jack to get my bike in the air (800+lb cruiser) and even cleared my car for an oil change. It has a safety bar that keeps the jack from coming down on you.

I was considering the HF lifts, but this one checked more boxes for me and looks well made.

I am a female that owns a Kawasaki Ninja zx6r. I do all the work on my own truck and bike. This motorcycle jack works great for assisting me in being able to work on my bike without any assistance. There is nothing worse than wanting to start working on a project and having to stop to get someone bigger and stronger to help you.

This jack allows me to lift the bike up, and access everything I need to get access to. I can also easily maneuver the motorcycle down, which is just as important. This jack has allowed me to accomplish a bunch more projects and customization work that I never would have been to do without being able to maneuver around the motorcycle fully.

The manufacturing of the jack itself is really stable, and strong feeling. It feels like it is really well made and sturdy. I like that I can feel confident working on my motorcycle while it holds it up, I don’t feel like I have to worry about it releasing and my bike falling.

I bought this jack a few weeks ago as we were working with other standard jacks and jack stands to lift a 750 pound Quad to repair the transmission. the way we were tring to lift the quad was very unsteady and I felt unsafe.

I purchased this jack and it was like night and day and it made the lifting and working on the quad much safer and was very steady. We did use a strap as suggested that made it even better. If you work on your own equipment as we do this is a must have.

I have used other ATV/garden Tractor jacks and this one is much better and well made. Glad I found it!.

Replaced my 50 year old hi-lift with this. Lifting mechanism is very good, but the stamped base has far too much play. The old base was cast fit tighter making it much more stable. If you buy this, make sure what you are lifting is secure (wheel chocks, straps, etc) or make sure the top of the jack is leaning against what you are lifting, because the jack will easily tip and that is very dangerous.

I get off road a lot. I’m not the kind of overlander that is constantly challenging myself and my vehicle to the worst conditions, but I have, over the years, found myself in mud and snow where a hi-lift would have come in very handy.

(I obviously got out, eventually, as I wouldn’t be typing this had I not). Sportsman’s Warehouse had exactly the jack I needed at a very good price. I’ve yet to use it, but that day is coming. Cheers.

This hi-lift has been sitting in my shed until I have a chance to go out on the trail. Yesterday some friends stopped by and where asking questions about basic tools needed for trail riding and I went to show them the Hi-lift.

when I pulled it away from the wall a dime sized piece of paint fell off the jack. I have read reviews about the paint issues with these (not good). its been stored and never used or exposed to the outdoors so I was very disappointed to see just how quickly the paint is going to come off.

As long as it performs like it should I will be happy enough. I guess I will find out soon enough as we have a trip planned next weekend.

This did the job that I bought it for and many to come. I only have one complaint, the handle needs to have more protection when being shipped. Mine came with an inch of paint chipped off one side of the top of the handle.

Of course I know it will function perfectly fine and had planned on adding 4 or 5 inches of plastikote anyway. All and all I’m very happy with the purchase.

This simple lift gate mod, is really nice to have. The install was fairly easy. The tool they give you isn’t the best. I had to use my own star bits to remove the latch. Otherwise, I’m very happy with the product.

We have one of these we have had for at least 30 years, Well my son needed one. And low and behold I found this on line at Rural King ! And they delivered free and on time for Christmas !!! Its built tough and he is very pleased with it ! Thank you for carrying such a great product !.

I’m a poor, do-it-at-home-yourselfer and so needed a floor jack that wouldn’t put too big of a dent in my already thin wallet, but wouldn’t fall on me either the first time I put it under a load. Combine the reviews I read here & elsewhere as well, the F-767 looked like it would fit the bill, and you know what? It did.

I used it to change the brakes on my wife’s small SUV yesterday & it worked great. While I of course had jack stands under the car as well, “just in case” they weren’t needed as the jack never lost pressure.

Keep in mind that the F-767 is SMALL. Not much bigger than your old scissor jack, but it’s a whole heck of a lot better. So much in fact, that I’m gonna leave it in my wife’s SUV should she ever have a flat.

I can’t vouch how well it would hold up under constant use, but after using it once, it’s basically paid for itself in what it would have cost me to take her SUV in to replace the front pads & rotors.

So as far as I care, I’m already out ahead. You just can’t beat it for $50.

The low profile floor jack fit my purpose for use with a 1998 Chevrolet Corvette. With the vehicle having a low ground clearance and my standard jack would not work. The jack fit under the vehicle with no issue and lifted the vehicle with ease.

My son needed a low profile jack for working on low & lowered vehicles. So for his 21st birthday, I bought him this. It’s sturdy, gets the job done & no one could beat TSC’s price. Thank you TSC from a long-time customer!.

I replaced a leaking, Larin 2 ton aluminum quick pump jack with the Torin 2 1/2 ton aluminum and steel jack. I’ve had it now for a couple of weeks. It does the jobs I need it to do with ease. It is not a quick pump design so it requires over 30 pumps to extend it to its top height.

The good news is the force required to pump it up is close to half the force required for the quick pump. So far the jack is working perfectly. It bled properly on the first attempt and it does not leak, so far.

I also believe there will be o-rings and seals available to repair it should the need ever arise. That is not the case with the Larin jack. Over all I’m very satisfied with the jack. Tractor Supply was the only store in my area with a jack the size and type I was looking for at a reasonable price, in stock.

I was surprised and happy to find it since I was in the middle of a job, with a car up on stands and no way to get it down.

I purchased this jack after looking at all the models available from various distributors. The fact that the jack is made up of mostly all steel parts (wheels) was a top factor in my purchase. I have used this jack on various applications and it has met or exceeded my expectations.

Set up was very simple and it did NOT require bleeding like the directions indicated it might. The jack has good lifting capacity and length of lift is adequate, even for a 4×4 pickup. I am very pleased with my value on this TSC purchase.

My 40 year old 2 1/2 ton floor jack finally gave up the ghost on me. Since I don’t have a garage anymore, I needed something I could carry to my driveway that was lighter. This one worked great and was priced right.

I needed a low profile jack for my mustang, but still wanted something to also use on my truck. This thing works great. The only down side is it’s heavy, which I don’t view as a bad thing, but if you are looking for something to transport or take in and out of your shop this could be a pain.

Very upset and disappointed in this purchase. Needing a new jack ,I thought I did my homework on this one. All my old jacks would start pumping with handle in almost horizontal position. THIS ONE NEEDS TO BE ABOUT 45 DEGREES Can’t use it from back of car to rearend.

Have to raise car from side. Almost usless in my crowded 2 car garage.

I bought this jack specifically to get under my Alfa Romeo 4C which has only 4. 25 inches of ground clearance. In addition to the low clearance the jack points are almost 18 inches in from the sill. I like the good sized puck on the lifting arm as it spreads the pressure on the carbon fiber underside of the 4C.

It functions well. My only complaint is the weight of the jack. I have not weighed it but I am sure it is over 100 lbs and is a bear to get into the back of a vehicle.

I thought looking at the photo’s that it would be smaller and could carry in the boot, but when I saw the delivery chap putting it on a trolley I thought that’s not going to be small. For my purpoise of swooping to winter tyres, this is going to be proffesional rather than my other Clark ones that do twist.

Mine has been listed as 3 ton but checking it against the others it is like the one in the photo and not the steel sided one. The ease of pumping up and also the twist of the handle to lower is a proper garage type action.

Now have to make some strong steel brackets to hold it out of the way on the wall of the garage. The 8cm or 3. 1/8″ should enable it to lift a car with a flat tyre, where as with my older jacks I had to use a scissor jack to lift it to get the trolly jack in place.

If it was not raining I’d go out and give it a try.

It does the business no arguments. It lifts my Passat with ease. It is heavy though, and the handles are great for moving it if you have to carry it. If you need to you can use both hands. Mine does say it has a 3 ton capacity on the label, though it wouldn’t matter in my case.

It has a no nonsense look and feel to it.

I purchased the jack for the weight of it unfortunately from the day I have had the jack it has only worked when you push handle to the floor I have asked for a exchange but got nothing only to return parts to be repaired so Id be left without a jack.

Make sure you check bolts daily as they come loose as the old saying goes you get what you pay for. So would I buy one again NO CHANCE.

This jack is very heavy and heavy duty. It lifts the object in a single or second pump. The lifting range is incredible. This easily fits under a Camry and a block isnt needed to lift a factory 4×4 F150.

Just park it somewhere that is out of the way when not in use. Also follow maintenance and purging instructions.

I bought this jack to replace an aging 1 1/4 ton floor jack I have. I needed it almost right away to pull a transmission. When lifting a light load, it works as advertised. 7. 5 pumps to full height.

When it has a load, like the rear end of the car I lifted, it takes more pumps to get it to the top of the range. Not bad though. About twice as many pumps. The rubber pad on the saddle isn’t very durable.

It split on the first lift. But the saddle is a standard size to be able to fit attachments such as the TCI transmission cradle.

I do automotive side work in my driveway at home. I was skeptical about buying this jack but took a chance. And boy am I glad I did. This jack came packaged looking like a quality product. Easy set up.

This jack lifted my 2004 Mercury Grand Marquis off the ground off of both right side tires with ease. Paired with a good set of jack stands this is an awesome floor jack. Glad I made the purchase. Will be buying another Sunex Floor jack again.

Love the jack, as it easily lifts my sedan with hardly any effort required. Doesn’t come with the oil for it or whatever it’s called. But I haven’t needed it yet, I just make sure to always release the air out of it before I use it.

My only gripe with the product is that I don’t believe this is 45 pounds. I have plenty of things and a 50 pound weight, this jack feels heavier than all of them. Probably more like 70-100 pounds. The poor guy delivering it was kinda struggling haha.

Only used twice Corolla 2008, point of full extension dropped a little. Followed directions before first use, oil level full. Safety release from over extending? Returning for examination / repair. Over all great floor jack build well for long term use, easy to move.

4 Star rating possible repair required, been 5 Star without concern full extension.

I’ve read the other reviews and can sympathize. But my jack and experiences were much better. I bought AutoZone’s Duralast 3 ton “garage” (floor) jack 7 – 10 years ago and used it occasionally (6 – 12 times per year) to lift medium-sized vehicles like our family van and commute car.

During that time, it required hydraulic fluid top-off twice when lift height per pump tapered. The second time I added fluid, while hurrying to fit a two hour project into 1/2 hour, I managed to open and add fluid to the wrong port.

This is humiliating to admit since the check-valve screw I removed to do this was clearly marked with a special red cap with the warning “Do Not Adjust”. This, predictably, shot the mechanisms that block the coordination of hydro flows until it could be opened and repaired.

I wasn’t able to find a manual or diagram online to work from, so called our local AutoZone to request one, and admitted my ignorant move to the store manager in the process. To my surprise, and on what I know to be one of their busiest times of the week there, I was told to bring it by to “swap it out for a new one”.

I reminded him that I had no receipt, had used it for several years, and had ruined it through pure impatience, stupidity, and 50 year old eyes w/out reading glasses, but he insisted that I come get a new one.

This jack had cost a shade over $100 years ago, but it supported my work sufficiently and I’m flat amazed that they backed this product to the extent they did. I haven’t always been thrilled w/ AutoZone (insufficient understanding of auto concepts among service reps at times), but the purchase of this house-brand floor jack has served me very well.

* One star deducted for having to add hydraulic fluid. If you get one, don’t worry. The correct top-off location is a no-brainer, I’m sorry to say *.

I am really pleased with this 42” all-cast Jack from Hi-Lift. Made in USA in a family owned company, this is a very useful tool. Used correctly it can lift, winch and clamp. It also conveniently came in a red color very complementary to my granite crystal pearl JK with red accents.

I bought it with the Teraflex HD hinge reinforcement and their Alpha accessory tool to mount the tailgate hinge. The 42” size is perfect with this tailgate mount as the top of the jack does not extend past the JK soft top (I repositioned the Clevis).

I recommend a neoprene cover to protect the gearing as well as a jack handle isolator (mine cost $7). Definitely read the instructions and lubricate gearing before use. If it’s your first jack I recommend watching a video on YouTube demonstrating safe use as proper precautions must be followed.

Overall outstanding piece of hardware!.

The jack works well enough–about as well as my smaller bumper jack by another company. I was very disappointed with how wobbly the base was and by the fact that the base and handle are held in with cotter pins instead of bolts.

I replaced both of those as soon as I saw that. I also replaced the Grade 5 bolt in the “adjustable top clamp clevis” with a thicker Grade 8 bolt. I do like the multiple tapered holes in the base plate that will allow it to be mounted.

Overall, I think either I overpaid or Hi-Lift under delivered. I probably won’t buy another one from Hi-Lift.

After recent “World Events” I am determined that I will never again buy products from “That Country” unless I have no other option. With that in mind when my wife asked me what I wanted for a birthday present, I opted for a genuine Hi-Lift Jack because it comes from the good old US of A.

My son and I have played, I mean worked with this tool quite a lot now removing tree stumps. It is awesome! very powerful and makes light work of getting really knarly stumps out of the ground. Yes it does cost more than other brands, and you always pay a premium in the UK for products from the USA, but I don’t regret it one bit.

The build quality is second to none. It has a real feel of a well made tool, not something that has been thrown together for a price. One piece of advice I’d like to pass on is watch Youtube videos on how to remove tree stumps before you actually do it.

There are some great hints and tips that would have helped me a lot. I’m very happy to recommend the Hi-Lift Jack. The delivery was fast from Electric Winch Shop.

I thought this was the neatest thing until I had to put it to real world use. Bought this thing 3 weeks ago, July 2020. We then took of on our trip from Oklahoma to Yellowstone, long ways from home on our way back we discovered one of our 1 month old tires was getting low.

No big deal we will use our new super duty awesome safety jack. Put the jack under the travel trailer (not attached to the tow vehicle) (weighing only 4500lbs) and it jacked up the trailer will absolutely no problems.

Once the tire was replaced with the spare I proceeded to let the jack down, this is were the problem is the jack does not go down all the way. Now my trailer was suspended with the tires about an inch off the ground and no way to lower it off the jack.

Had to call out road side assistance to put another tiny winy bottle jack to get out our new Super duty piece of junk jack. I am still heated yes, reading other reviews I see that this is common. Stay away from this product as it simply does not work.

As many people know, it is difficult to lift a unibody SUV such as a Jeep Grand Cherokee. The only authorized jack point in the front is the pinch weld. It is impossible to use a floor jack, then place a jackstand at the same location.

This all-in-one jack solves the problem I had no problem lifting the front of my Jeep with the pair of jacks. Even though the front end is very heavy, the jacks were stable. I had a quickjack, but could not trust it and returned it.

These were hundreds of dollars cheaper. I’m glad I found them.

I bought two of the 3 Ton unijacks for my little Jeep Wrangler. They worked fine at first. Used them maybe four times and kept them in storage. Of course warranty ran out and they both just quit working.

Trouble shooting they both had fluid, Suggested maybe bleeding them of air but piston will not even go up to perform bleed function.

Rather than crawl under a low bus with minimal clearance to setup a hand jack and pump by hand, this allows you to stay safely to the side of the vehicle and insert the jack under the jack point. Measure carefully.

It has three different height adaptors, but the actual range of lift with any given adaptor is not that great (because the jack is fairly stubby). So the process of lifting something to about 17″ is rather tedious — lift and block, let it down on blocks, change adaptor, lift again.

Even had to place the jack on blocks once. It lifts fast enough that you can see the vehicle move, but it takes more than my little compressor can keep up with so it is a lift, wait, lift, wait process.

Seems to hold up pretty well, but I would NEVER go under a vehicle held up by this alone (without proper cribbing – YouTube has some good videos) Some cons: 1) Assembly required (no big deal, just assembling the handle and adaptor rack mainly) 2) Air trigger can lock in on position.

I consider this a slight safety hazard. It tends to lock even when you aren’t touching it, so once had the jack start lifting when I connected it to air even before I was ready to pull the trigger. 3) Would be nice to have more lifting range with a given adaptor if it were possible without raising the minimum height.

22 ton air hydraulic jack This check works as described. The instructions in the manual are pathetic. The quality is very good and the various interchangeable tips that go in the Jack are very good. It seems to be very well-made and very heavy duty and sturdy.

Bought this about 4 years ago and for what I do it’s exactly what I needed. Only replaced it once under warranty. I own and repair my semi’s so this gets used a lot!!! Makes my job so much easier!!! The price is a great value for as hard as this jack works!!.

Don’t often get flats anymore but just had one in my Honda civic. Had a scissor jack in the trunk and within minutes it was up and the tire was on it’s way off. I removed the tire and the car rolled just enough to fall off the jack.

Now I’m really stuck. Got some help and got home and right away ordered this jack. Notice the sides of the of the highways, no longer do you have a flat service to set your jack on. So save your self a tow call and spend the money on this low profile jack.

Great investment!!!.

Low this low profile for my extra low car! Goes under smoothly with my car lowered and it also has a lip no problem for this jack! Best one yet!

The floor jack is exactly as described. It seems to work very well. I would recommend it for light vehicle use or lawn mower or atv use.

The Unijack is a great combination of bottle jack & jack stand. It is strong, sturdy, versatile and well designed. It is compact enough to carry in your trunk. It lifts with the ease of a typical bottle jack and Secures your vehicle as it latches (similar to most jack stands) as you jack up your ride.

Ideal for most SUV and Trucks. Now, they Only draw back is with cars and Low SUVs with Pinch Weld jack points because the Unijack stands Too High to get under those areas and you must jack from Alternate spots or use another jack to get the vehicle high enough to use the Unijack.

Otherwise, a great overall Jack.

I was very disappointed that the lift was used. Package was fine. It was delivered and was probably not check when some one returned it. It had rust on the lift spindle and paint chipped off the pump bar.

I used it twice. The first time it worked fine. The second use, the lift would not go up despite the bleed screw tightened all the way. I will return it and buy one somewhere else.

Needed to work on a jeep WK rear suspension and was tired of putting blocks under my old jack. I would have liked the post that comes with it to be longer by 2 inches. Easy to make a new one and it’s vehicle specific not something everyone will have an issue with.

Compared to another entry level jack, this one wins. The handle can be assembled and inserted with no tools, the other one needed a wrench. It is much easier to pull around, and can lift twice as fast with its dual pistons.

The handle uses a square drive, whereas the other one used cogs that eventually misaligned, and needed a washer to remedy.

Very high quality aluminum jack. Superior to others at the same price. (1) it’s almost entirely aluminum. The only ferrous steel parts I could find were: hydraulic pump and lateral lift bar, the hoods of the small rear casters, rubber padded jack plate, hardware.

Other “Aluminum” jacks have more steel parts (like the lifting arms) and weight at least 10lbs more. (2) front casters seem to be high quality. They roll very smoothly with close tolerances. (3) overall fit and finish were very good.

No raw/sharp edges, nice paint, properly lubed and ready to use. I also bought a HF “Aluminum” 2-ton at the same time and side-by-side it was very clear the JEGS jack is a better made, higher quality tool.

I have three of these jacks mostly because I really like it. They are light but strong and raise the vehicle high. We did have one of the jacks break a pump piston and apparently that is not a part sold separately.

We are using that jack for parts or will make the broken part. I bought the third jack to replace the broken one because I like it so much. I wish we could buy that one bad part though.

This thing is a beast. I needed a safe way to raise up my rig and this does it flawlessly. Rolls great, lifts with ease. The holder for extender didn’t clasp very well, kind of a pain really. It ended up bending slightly and took a tiny bit of work to get back in position.

Overall, doesn’t affect the performance.

Surprisingly excellent quality. No more danger lifting wheels off the ground. Not a Chinese design with a different label slapped on it. Truly a “beast” in person. Make room for this jack.

I thought the jack was made in the U. S. A. , but it was made in China. I do attempt to buy made in U. S. A. After I purchased the jack I found it on Amazon for around $70 cheaper. When I buy another jack I’ll be looking for one made in the U.

S. and I’ll buy from Amazon.

I paid premium price with no discounts and got a jack that was obviously a return and had been used. the packaging was not what it was supposed to be. It was all torn up. so either i got a used jack or a refurbished one.

i would have let this review go but you have insisted on a review. so now you got one. i do not recomend buying online from this place.

I like it very much….This Jack look so nice and durable Perfect for my garahe….

I bought this to use to lift large logs off the ground to keep them dry. Works as well as I thought it would. It is heavy, and it’s pretty scary flipping the lever to lower a heavy load, but so far it hasn’t come down unexpectedly.

I had an issue where Summit charged me twice for this, but they realized the error and corrected it before I noticed it. Still, I’d rather it hadn’t happened in the first place, but that doesn’t reflect on my rating since it has nothing to do with the quality of this tool.