20 Best Iwb Holster With Claw (2023 Updated)

I had been looking at these holsters for awhile. I’ve tried several different ones but was never really happy with any of them. Finally decided to just go ahead and get this holster with the claw attachment.

This is absolutely the best holster I’ve used, so far. The fit and finish is superb. There are no sharp edges and it has a full length sweat guard. The holster is thin and compact but not cheap. The retention is fantastic.

Couple that with the adjustable ride height and adjustable can’t, you’ve got a rig that can be personalized your own way. Now. About the claw attachment. It does exactly what it says it does. It pulls the grip in tight against your body thus making your firearm virtually invisible.

I live in Florida and with the heat and humidity, I usually wear just shorts and a T-shirt. With the claw attachment, my firearm practically disappears. I would highly recommend anyone adding this to their purchase.

Since I got this holster a couple of weeks ago, I have been wearing it daily. It is, by far, the most comfortable holster I’ve used. Let me just say this. If you’ve been thinking about getting a Concealment Express holster, just get it and give it a try.

Don’t forget the claw attachment, you can’t beat it.

Hi Ben. I received my 2 holsters in the mail yesterday. The IWB holster is perfect. Just what I was looking for. I haven’t mounted my Sheld Sights, mini reflex sight on my HellCat yet but it looks like it will fit inside of the holster nicely.

I made a mistake on the OWB holster. I don’t think the one I ordered will holster my HellCat with the Shield Sight Mini reflex sight mounted to it. Will it be a problem to swap it for one that will holster my HellCat with the mini reflex sight mounted? I don’t know exactly which model that would be but I’ll take a look at the choices and see if I can pick the correct and run it by you.

Is that Okay? The H&K fits nicely in the holster I got for it. Smooth draw and secures the weapon nicely.

To start, had to wait two weeks for delivery, even though site said that holster was in stock. No response from my request of a shipping date and no return phone call. BUT, Tuckable IWB means what it says, it’s tuckable.

I adjusted the depth and cant and now I almost don’t know it’s there. I’m south paw and 6:00 O’clock carry and it rides great, even on a 100 mile road trip. This holster is all I think I will ever need for my Taurus GX4.

I live in N. E. Texas, hot and humid like what Frank H. stated about Florida, the sweat guard is appreciated. If I ever get another carry tool, I will be sure to look at Rounded holsters first.

The holster has two indentions that hold the flashlight in place. Because they are so pronounced it is nearly impossible to draw the gun. I had to replace the rubber bushings and use the longer screws that came with the claw that I purchased with the holster.

They could easily make those indentations much smaller–not being able to draw your gun is a potentially life-endangering problem. Also, the clip on the gun is very pronounced, protruding much further than needed to fit over any thickness of belt.

I tried to remove the screws so I could take out the bushings and draw the clip in closer to the holster, but they appear to have used some adhesive (red locktite?) to keep the screws from coming out.

This isn’t a deal breaker, but I like some ability to personalize fit. While I can now use the holster, having to use some aftermarket extended bushings to make the holster loose enough to release the gun and not being able to adjust the clip made this just an Okay option for me.

BTW I had the same problems with the holster being too tight on a DeSantis kydex holster, as well–I don’t think holster companies have done good R&D for guns with lights.

Very pleased with the holster and the way it fit my Glock 43x with tlr6 perfectly, although I was unable to find a good position to carry the iwb holster without discomfort ( which was more due to my physical make up than the holster ).

I reached out to the company about an exchange for an owb and was very satisfied with the entire process. Processing, shipping, returns, exchanges, everything has been a positive experience. My exchange will be arriving within the next day and I have no doubt that it will meet my expectations.

I really like the attention to detail that the holsters have in relation to the specific firearm. The retention is great and they are one of the few holsters ( and I have a drawer full ) that fully cover the trigger guard which is very important to me as the majority of my firearms are Glock.

I would highly recommend this brand to anyone looking for a quality kydex holster, not only for the quality but for the customer service behind the product.

My first claw kit was bought a few years back for my IWB Tuckable 1911 10mm holster. I was immediately impressed with the improvement in concealability this little device makes, especially for a larger weapon.

With this past experience and knowledge, I knew it would be a great addition to the IWB Tuckable holster for my wife’s Taurus G3 holster. I like it with the short stand-off but my wife prefers it with just the claw kit bracket and no stand-off.

Just like everyone is different and has different likes and dislikes about things in general, this takes that into account and lets the person wearing their IWB holster tailor how it fits and feels to their individual liking.

That makes it pretty outstanding in my opinion. I highly recommend it.

I had been looking for an IWB holster for my gen 1 Baby Eagle/Jericho compact for awhile. Stumbled apon this and figured I would give it a shot given the price. I was pleasantly surprised on how nice it was when it arrived.

My pistol did have a little play in the holster, but was to be expected as it wasn’t built for it. I was also glad the holster didn’t interfere with the slide mounted decocker. The adjustment of the retention is great as is the cant.

I took a heat gun to the top/slide edge of the holster and gave it just a little pinch, the gun now fits tight in the holster. The holster is about a half inch longer than the end of the muzzle, have not decided to trim it yet.

So, this is a long review for a holster that wasn’t built for my gun. I can only imagine how well it would fit one it was actually built for. But, if you are looking for an inside-the-wasteband holster for an old steel framed/no rail Jericho or baby eagle I would recommend giving this a shot.

I should have gotten one of these a long time ago. It has a very affirmative snap and retention that can be adjusted. It appears to be quality made. This is not actually a carbon fiber holster, but rather it just has a fin carbon fiber layer on the exterior.

The only complaint that I would have with it is that it rides high compared to what I’m used to with a crossbreed super tuck deluxe on the lowest setting. However, I’m carrying a much smaller gun with this p365 so it’s not really a deal breaker.

This might be a problem if I was carrying a bigger firearm. I added a picture with my shirt tucked in so you can see how I had it rides. This fits tactical belts but also works fine on normal with leather carry belts.

I have one of your IWP holsters for my SW Shield for about 5 yr now it is fantastic. I just got a new gun SigP365xl I accidently ordered a holster for std 365 You allowed me to return for even exchange n/c.

I just started using it right out of the package slight tension adjustment. Put it on perfect fit perfection in carry. I love your product Recommend it highly to everyone I know who carries. Fabulous holster fits great comfortable all day use no movement no discomfort ease of draw.

slight contour makes it fit close to the body. amazing could not be more pleased. sorry no pic. customer service in returning the wrong size to get the correct size and the help, everything is first rate.

Great company Great product. 5 stars.

I ordered a holster for my EDC M&P Shield Plus. Along with the holster I purchased the holster claw in order to give myself multiple options on ways to configure it to try and work best for my body. The quality of the actual holster itself is decent.

The kydex mold fit the firearm well and retention can easily be adjusted with the set screw. However, if you are planning to use this holster for appendix carry, I would probably look at other options.

Even with the claw attachment in a few different settings, this holster does not do a good job at avoiding printing. There is no aspect of the holster that pushes the handle of the firearm towards your person to avoid the magazine from protruding into your shirt.

The claw itself only attaches with one single screw, which means that it can actually rotate while wearing the holster making it rather unusable. I don’t mind using it for strong side 3 or 4 o’clock position IWB carry if you are wearing a sweatshirt or flannel or something to cover the printing, but the single clip and lack of good support to angle the handle better makes this difficult for me to use on a daily basis.

Good company, good quality, not-so-great design IMO. Would not purchase again for my specific use.

This claw works as intended with a definite improvement for pivoting the holster to help stop printing of the bottom grip/mag area. I carry and use it AIWB and no doubt, an improvement. Hat’s off to the ingenious design that allows the claw to lock up securely and tightly in the desired position without increasing or affecting the retention tightness.

My ONLY complaint is the small removable pads. They are great except that small oval presents a small point of contact or “footprint” against a stiff EDC belt (I use a Nexbelt). This sometimes causes the whole package to pivot forward slightly when sitting.

I ended up using my claw without the pad, which presents a bigger/longer footprint against the belt and seems to prevent that pivot. I would love to see WTP produce a new oval that is longer, ummm maybe 1-1 1/4 inch long, rather than these little ovals.

Seems that would put a larger point of contact against a good belt.

I watched several videos on YouTube that all highly recommended this holster, in addition to wanting to support a USA made product, I bought this holster. It came in the mail fairly quickly and I tried it immediately.

Oddly enough my gun slid in with no “click”…. as can be heard with well fitting polymer holsters. I inspected it further and it was obvious to the eye that the holster was not tight around the firearm at all.

There is a large gap between the holster and the trigger guard, and the holster is not snug anywhere. With any slight tilt of the holster, the firearms slides right out…. The quality simply is not there.

It’s obvious that this holster is a dud and the QC department missed it. The return policy says 100% guaranteed, yet you have to pay for shipping to get a refund. I believe that if the company sent out a poor quality product, they should cover the cost to retrieve that product.

With the addition of the quick clip the user can take full advantage of the IWB feature of the Amberide holster regardless of the type of casual clothes that are worn. If a belt is worn than the is no worry that the holster will “come out” when the pistol is presented.

Consider the quick clip a “mandatory” accessory to take full advantage of IWB feature of the Amberide holster.

Ordered the wider 2 inch clip due to it was not clear the original 1 1/2 inch belt clip would work for me. For $9. 00 more buy the extra 2 inch wide clip and you are covered. Comes with extra retaining screws a rubber grommets.

The original is a tight fit on my thick rawhide belt so I will be switching to the 2 inch clip.

Had to buy this because the original screws fell out. Wasn’t to happy when my gun hit the floor. Loctite would be a good recommendation.

I started carrying with Urban Carry holsters a couple years back with my G43. I was hooked instantly because they were comfortable with any clothing, and the clip is strong enough that when I carry with sweatpants or gun shorts I can carry the same way and have never had the Holster come it with the gun.

I like the audible”click” you get when the firearm is seated properly, with the right tension I am 100% confident with the holster retaining my firearm should I fall down or end up needing to address a self defense situation that doesn’t require the use of deadly force.

The fit has definitely been tight for the first few days but after that the holster is truly molded to the firearm and it is a perfect fit. I am on my 3rd holster for my 3rd gun, and I mention it or show the holster to anyone that talks about their Kydex Holster from any other brand.

I’m a bigger guy so Kydex digs into me whether I stand or sit, and especially when I sit in my truck. Leather has always been more comfortable but can create a challenge with quick reholsters, but Urban Carry holsters are thick and sturdy enough to maintain shape to allow for an IWB reholster with no issues.

Pros: More comfortable, just as concealable, and great retention. Cons: I wish I could get a claw to further push the grip of the gun into me. That would eliminate printing on my athletic 280lb power body.

That con is still not enough to take away a star though, 5 stars all day!!!.

First the good. It’s a very good looking holster. Nice leather, strong belt clip, well constructed. The not-so-good: The very feature that drew me to purchase the holster, the “lock” in Lock Leather, does not function for my Beretta 9mm APX Carry.

The little clips inside the holster are supposed to latch onto the front of the trigger guard. They do not. Simply because the internal clips are placed too low, just beyond the reach (precisely 3/16 of an inch) of the trigger guard no matter how much force is used to push the gun as deeply as possible into the holster.

There is also a safety block beyond the clips that serve to prevent muzzle exposure. The clips work when the block is removed proving my point, but you absolutely can’t use the holster in that manner as it very unsafe to do so.

I emailed Urban Carry describing the issue and to UC’s credit they responded quickly, suggesting the usual stretching and break-in time and all. However, no amount of use and stretching will bring that clip up, closer to the trigger guard.

UC missed the mark on my gun. I’m still going to keep it because the holster is so very tight it provides plenty of “lock”! Too bad UC poor measurement renders its key selling point moot.

I was skeptical at first because I have tried several options of well know companies for my 9mm Berreta APX and but none have compared to the Urban Carry IWB holster. All the others where basically too tight to draw my firearm from.

Even when I left my pistol in them for days or adjusted retention still couldn’t get the pistol to fit correctly. Urban carry IWB for my pistol was incredibly easy. Right from the packaging it was a little snug but made a little adjustment on retention and badda bing badda boom perfect fit only left pistol in holster for a couple of hours too stretch it and too her for a test drive that evening when I went out.

Perfect retention comfortable and I feel more comfortable knowing I won’t have any issues when I need to respond. The quality is beautiful never had a leather holster but I will be buying another for my 40cal soon.

I am very happy excited and satisfied I finally found the perfect carrying holster. Thank you Urban Carry.

EDC is a 365 with 12 round mags. I’m a bigger dude, and a lot of the IWB’s out there don’t do a very good job of keeping the butt of the pistol flat against your body in the 8:00 position. Against Blackpoint’s recommendation to remove the strut for carry in other than “appendix” positions, I leave it on for 8:00 carry with a riggers belt, and it sucks the pistol right against my body.

Extremely comfortable, no pinches or hot spots, even when seated in a car. This holster also carries the pistol very low above the belt. Great for concealment, but make sure you practice your draw, because there is very little clearance between the top of your belt and the grip.

My only “complaint” or suggestion for improvement would be to -slightly- increase the size of the sweat shield. Again, bigger dude, and on reholsters I occasionally grab a little flesh and get a pinch.

With the holster sitting so deep by design I think having just a little more coverage on the slide, body side, would be useful.

Fits perfectly my 365xl with romeo zero attached. The strut was a first for me on a holster. Functions perfectly in keeping the grip close to the body and is not noticeable or irritating. Super comfortable holster that solves the first time issue with finding a compatible holster.

Normally I utilize “Milt Sparks” holsters based upon their semi custom comfort and fit I rate this holster an equal. Brand I wasn’t familiar with and would have no hesitation utilizing in the futuyou.

Background and opinion based upon. 31 years LEO – retired. Former certified leo firearms instructor and life long pistol shooter , 63 yoa.

I purchased this holster because it has ben updated since my last purchase. My first holster was when I got my first P365 and it had no optic. I recently purchase a P365X Romeo Zero so needed a new holster.

I love the why the Black Point Tactical holster fits me and with the concealment strut, there is no printing at all. The one problem I found with my new holster is even though it is designed to fit the P365X Romeo Zero, it is not made to fit with the Romeo Zero optional metal shroud mounted.

This is only minor and I will easily be able to grind a bit of Kydex enough for the shroud to slide into the holster. Just something to be aware of if you’ve added the metal shroud over your Romeo Zero and want to use this holster.

I have been a concealed carry licensee holder for 27 years here in Texas since it has been legal. There is probably not a handgun made that at one time or another I have carried in those 27 years, and all were carried in a leather holster, until now.

When Kydex first came out I thought that was the stupidest silly thing someone could do making a holster out of plastic. Blasphemy! Well, I saw the light, or a YouTube video, that caught my interest on the Tulster OWB Contour Holster.

The biggest issue I had with the Kydex type holsters was how far they stood out from the body. I like the gun close and tight against my body and from what I saw in the video that Contour holster did just that.

So, I ordered the Tulster OWB Contour Holster for my Glock G43X from Tulster and It fits close just like I like it and is more stable than any leather holster I have owned. I like the snap in and out feel knowing that gun will never leave that holster unless I pull it out.

Another leather holster goes in the holster drawer, and I am a now a proud Tulster Kydex holster owner. The Contour fits the bill for an OTW. Tulster has converted a dyed in the wool leather holster guy to plastic, er, Kydex holster owner.

Keep up the good work you have an excellent product. Job well done. My next purchase will be the Profile for my G42.

WOW! Tulster is an AMAZING company that makes a stellar holster!! First of all, I was looking for an American made holster to replace the one I already have that is less than ideal because of the SAS contours of my pistol.

To avoid making another bad choice with a holster, I wrote Tulster and asked them if they could address some of my concerns. Now I don’t want to set the expectation that my experience is their norm, but the next day I got a call from one of the owners.

He took time out of his day to call a random potential customer. Who does that?!?! He was genuine, authentic and, to me, represented the pinnacle of what an American company could/should be. He earned a customer for life.

I ordered their Profile holster and augmented it with their 1 × 1. 5″ DCC Monoblock Metal Clip – Profile/Echo Series. I couldn’t be happier. Not only was their customer service an unparalleled experience, their product is extremely well crafted and refined and shows in every contour that Tulster genuinely cares about making a product worth every penny spent.

The Sig with the Lima slides in with that satisfying click and it’s also super comfortable to wear as my edc. Thank you TULSTER!.

As we all know, there is a plethora of places on the market making Kydex holsters, and this review isn’t about bashing any of those products as I own some of those other brands. But here are the key points I found that make my Tulster purchase spot on for me: 1.

) GREAT finish, the holster is professionally finished, no sharp edges to snag on clothing or skin, easy on and off the belt/pants. 2. ) Adjustable cant, easy for appendix carry or if you aren’t into that great for side carry, i.

e. 3-o’clock. 3. ) Fits my SIG like a glove and the retention is solid, like that it has an adjustable retention screw, full sweat shield and a very positive click when I holster my weapon. 4. ) I like the way the trigger guard is cut which allows me a good purchase on the grip of my pistol, fast and easy access and then to reholster it.

5. ) I like the raised sight channel and the muzzle being open ended which is a bigger plus if I were carrying it OWB. Lastly, love that it’s made in the USA and in Oklahoma, this has been one of my better purchases with regards to holsters, and I have zero regrets on getting it.

This is one that won’t end up in the box of other holsters that didn’t quite measure up to the hype on the website. Hope you get one and like yours as much as I like my Profile.

I love my Sig Sauer P365 XMacro and the holster I ordered for it fits it perfectly! I ordered the holster when I purchased the gun and my holster arrived very quickly, even before my gun was ready to be picked up.

I was super impressed by the quality and the fit! Excellent quality and craftsmanship. I would definitely recommend and would order again.

The order didn’t take long to ship. The holster fits nice and is snug. Hold the gun perfectly in my opinion. I do like the look of it but that’s irrelevant cause, well, it’s tucked away. I’m happy with it.

Unfortunately I bought two cause I wasn’t paying attention. All in all, I’d recommend it.

I cannot get the screws tight enough to keep the gun from slipping out of the holster. I think it’s just a little too wide for the gun. I’ve tried to tighten it as far as I can. I may have to get the washer out and cut the washers in half so I can squeeze it even tighter, but that should not have to be done if it fits the gun.

Let me know what I should do. Tom Brozovich.

This is easily the most comfortable IWB I’ve ever worn. EASILY. However, it has some issues. The first is that it’s difficult to put on while I’m standing around in my office getting dressed in the morning.

Trying to do so while confined inside my car after leaving a nonpermissive environment is out of the question. The suede side is just too coarse and will not slide over my undershirt or underpants. The other issue I have is retention and insertion.

When reholstering, the back end of the slide lock would initially snag on the outside of the channel, and the lack of positive stop makes me feel like this is bottomed-out, even though it’s barely in the holster.

I used some application of heat and a stainless steel rod to flare this portion a bit, which handily solved the issue. With retention, the gun just doesn’t feel like staying in the holster. There’s no active retention and I can’t really feel any passive retention.

I get that the CZ75 design doesn’t lend itself well to rotational stability without something butted right up against either side of the trigger guard, but even after adjusting the shape of the inward bulge by the trigger retention area, it still doesn’t quite want to hold onto the pistol.

At this point I’m holding onto it with the intention of using it when I have to carry for prolonged periods, or while in a more permissive environment where I shouldn’t have to worry about removing it.

**VH COMMENT** Thank you for taking the time to review your holster, we are so sorry to hear that you are not 100% satisfied with the holster you received. All of our holsters are molded to the exact gun model listed for an exchange fit.

While the hybrid holsters, with leather on the back and Kydex on the front, will not click like the all Kydex holster, they should have an exact fit and secure the gun while on the belt and up against the body.

You should not have to make any at home adjustments to the holster for it to fit properly. We are more than happy to assist in getting this resolved for you as our goal is for you to be 100% satisfied with your holster.

Please reach out to our Customer Service team so that we can better assist. Have a great day!.

Ordered the holster for my 43x. After the first hour or 2 of carrying the rough finish on the inside really irritated my skin. I emailed customer service and they requested pictures. Pictures were sent and then nothing.

I replied a few times and never heard back. Lesson learned. It’s a shame because I’ve heard good things about their holsters. They don’t stand behind their holsters, they hide behind them **VH COMMENT** Thank you for taking the time to post your review.

I am so sorry to hear about the issue you are experiencing with the leather. I do see that you have been working with one of our agents who has sent you multiple emails. We have seen that they will sometimes go to junk or spam so, you can check there for her replies.

We will have someone reach back out to you today from a different email platform to get into contact with you. All of our holsters are handcrafted to order and the leather is a natural product so, there may be some variance between each one.

Each holster should be tested and inspected before it ships out and we will certainly look into this if the leather is rough on your holster. Our goal is to produce quality products and provide exceptional customer service.

We stand 100% behind all of our products with a 30 day return/exchange policy as well as a lifetime warranty and we look forward to assisting you with this and getting you set up with a holster to meet your specific carry needs.

Have a great day!.

When I need a holster which is quick to remove and or place on my belt, I go with this BladeTech Klipt. The best polymer IWB holsters for small (. 380 or smaller) pistols I have found. And so far the best bang for the buck option I can find for LCP Max.

I prefer Leather IWB over polymer, however, good leather holsters for small pistols are harder to find than polymer. I have found only one really good leather IWB holster (cozy partner for P365) which also works for LCP Max.

(But very expensive compared to the BladTech Klipt, and less flexible in placement options. ) For flexibility, this is often my first choice due to the excellent yet simple belt clip that hooks on and stays stays on.

Belt clip, very good design for a polymer clip which I like better than any metal clip holster I have tried. An adjustable cant would be even better (See Nano model). Pistol grip sits just above my belt line, easy to conceal under a light shirt.

Minimalist design allows for effective placement in various IWB body positions. Pretty simple to put on and take off quickly if needed. Clip hooks solid under belt, much better than any other clip option I have tried.

Sweat shield on this is a nice feature, and appropriately sized. Most small pistol holsters I find do not have this feature. Wish I had found BladeTech sooner. My box of misfit holsters would be much smaller.

I’ve been a Blade-tech fan for almost 15 years, the only other holster company I’ll consider for duty quality holsters is Safariland. This latest purchase was for my new EDC, a Springfield Hellcat. Selection was limited to an IWB model in black, but I needed both IWB and OWB so I’m halfway there now.

WEB sight ordering was straight forward, easy. Delivery was fast, maybe four days at most. The holster it’s self was BladeTechs high quality polymer construction. Weapon fit was perfect and adjustable.

I also got a single mag carrier, also perfect fit. The belt clip was very tight, I wear thick stiff belts for EDC. Functionality is perfect, we’ll have to see durability over the next few years. I’ve never had a Bladetech holster break, I have at least six 1911, three Sig, and another four holsters from my XDm’s and MP’s.

I bought this for a j-frame revolver, and I prefer this to my other appendix iwb holster i have, despite that holster coming with a claw for flatter concealment. The weight distribution and tension are excellent and it is indeed quite minimal.

Overall I would recommend this holster, and only give it 4 stars (5 if you normalize for price) because it doesn’t feature a claw attachment, and I can’t tuck a shirt over the holster unlike the ultimate klipt.

If the ultimate klipt was offered for my gun I would have got that instead but I’m stuck with what I can get. That being said there is a hole for mounting one on the side, so i tried a different branded claw and it fit, but not perfectly.

I went without the claw and truly this holster with my gun doesnt need it, i would just like the option.

I got this holster because I was upset with how my gun wanted to fall out of my alien gear holster. The alien gear one was awful uncomfortable anyway. There would always be a sharp edge digging into my hip joint any time I sat down.

That one also made me sweat like crazy. I’m much much happier with my amberide. It’s not so heavy and in the way. I’m a curvy female and this has been the best iwb belt I’ve experienced. I wear my gun a lot more often now that I like this holster much better.

It seems most holsters aren’t made with women in mind. If there’s one marketed to women, it’s usually a piece of junk that the gun will fall out anytime you go to pick something up. I love having the retention on this.

I barely had to cant mine from the original position. The only thing that I would knock is that it’s uncomfortable to wear this without your gun in it. So if you have a doctor’s visit, it can get very uncomfortable.

The quick clip can make up for it but then I just have to readjust my belt. It’s very easy to get this off and on. My gun balances nicely too. I feel like I print less eith this one than the alien gear one.

When I showed my husband this amberide, he kept questioning me if this was the one I want. I said I’ve been in this long enough to know what I want. I wouldn’t be showing him this if it wasn’t what I wanted.

I had him try my other alien gear one for another gun I had that had the same sharp edge digging in the hip problem. Now he understands what I went through! I just love having this be a bit more minimalistic.

Customer service is a lost art these days, but Amberide has set the standard. USPS lost my package, and Amberide did not hesitate to immediately send out another one. The holster is exactly what I wanted.

Only complaint I have isn’t really a big one. more of a cosmetic complaint. I ordered the blue carbon fiber IWB holster for my SIG P365 SAS. I thought the carbon fiber would look a lot more “real” than what I saw online in the photos, but cosmetic issues aren’t really a big deal to me.

I am thankful for Amberide’s products and customer service. I plan on buying another holster from them for the next gun I buy. Thank you, Amberide!.

This was ordered and arrived three business days after being ordered. The price is incredibly competitive so first reactions when placing the order is quality will be lower par but that is not the case with this company.

The holster is a perfect fit for the Jericho to enhanced with a polymer grip and steel slide. I could not be happier with this purchase as I will be purchasing multiple additional holsters as well as accessories from this company hence on fourth.

This tuckable is designed around a railed post-2007 IWI model. This means it has the appropriate contour for the earlier F-model IMI without the rail as well. I use it for a surplus unit from the ’90’s.

The fit is snug and retention is tight. Highly recommend the extremely affordable claw kit if you don’t want your little three-pound monster to be peeking out from underneath your shirt. Innuendo not intended.

Users of pre-IWI models may find they prefer to gently warm the sight pocket with a paint removal gun or pencil torch and curve it over slightly. This was the only issue I had with the holster’s fit, as my older model Jericho lacked the large sights that the newer models had and the contour pocket digs into my love handles just a little bit when I slouch.

Holster is otherwise very well made, fits snugly, edges are chamfered well. Leaves a brownish plastic residue on my trigger guard after dry-fire practice, but at the price I can afford to replace it a lot more regularly than I believe I’ll need to assuming this is plastic transfer from the inside of the holster.

Highly recommended for the price.

Graet holster that fits a heavy gun. Adjustments were easy to do to find the right retention and thus far no scratches on my gun.

I’m probably not the best reviewer as this holster is my first ever for my first ever carry but I have some thoughts that might be helpful. I bought this for my P365 SAS specifically for wearing summer clothing (t-shirt and cargo shorts with tie waist).

After reading several online posts and reviews I found Tulster. This holster works well for me in either appendix, cross-body, or 4 o’clock. I settled on cross body as it is the most comfortable with minimal printing.

Please note I also purchased a Monoblock to better attach when not wearing a belt. I like this holster and do not see myself looking for another summer holster. If considering IWB for summer shorts then I highly recommend adding the Monoblock.

One small issue is the holster does not seem to have considered cross body as an option. The holster allows some degree of angling the clip or Monoblock but not if you want more angle for barrel to the outside and grip to your centerline it will not angle much.

Not a huge issue for me.

Very well made holster. Fit pistol perfectly straight out of the box. Cant is adjustable. Holster holds pistol securely, but allows fast draw. Grip is positioned so that a full grip can be achieved while holstered, which enabled an efficient draw.

The design is well thought out, and the molding is very well done. I had researched the type of holster that I wanted, and a number of forums had a significant number of people that currently use this holster and were highly recommending it.

The price was competitive with similar holsters from other companies, it was in stock, and they shipped it out the next day after I placed the order online (I ordered it after hours the evening before).

I used the free shipping, but still had it in my hands in a few days. I am pleased that what I received matched my expectations from all of the reviews I had read. I definitely was not disappointed! I will be using Tulster in the future.

Good company, making an excellent product that performs extremely well.

This is an excellent Mag Holster. I have purchased two now. Perfect retention, excellent construction, and very comfortable to carry. I purchased two, one right hand draw, and a left handed draw about a month later.

The second purchase was to overcome the only down side I see in the design, and is my opinion only. The orientation with rounds facing forward in the holster requires a 180 degree rotation of the Magazine after draw before loading into the firearm.

An orientation of the rounds being stowed in a rear facing direction would allow a more direct, smooth draw stroke motion up into the firearm for faster reloading. The only reason for rating 4 vs 5 star rating.

4. 5 in my book. If you are willing to overlook that, it is an excellent product. Shipping was very fast on both items. I will definitely try out more of their products in the near future.

I can tell anyone who has made it to this review, just finding a company that makes a holster for a Smtih & Wesson M&P 2. 0 in 10mm is a real challenge. there are a few out there, but not many. Some make no distinction between the two sizes available.

My first order from another company did not fit al all, despite being handmade; supposedly for a M&P 2. 0 10mm. Long story short, Vedder came through with flying colors. a quality product with a variety of color and pattern choices, that fits perfectly, and absolutely no problem with the high sights catching on the holster.

And yes, the order came quickly with not problems. And yes, it can be cut for a red dot optic. Pick your color or cosmetic, and buy it. you won’t regret it!.

Very pleased with this lefty holster. Fits both M17 and shorter-barrelled M18 snugly. Audible click let’s you know the firearm is seated securely in place. Users with large hands may find the pistol release lever to be a little tricky to get to, so you need to practice engaging the drawing your weapon until it becomes a routine.

If you want something to wear underneath a jacket without detection, this holster may not be your best choice.

Competitive price for an excellent holster. However, description says inside waistband but this part number is outside waistband, which is what I wanted. Always check the manufacturers part number in the description so you don’t order something you don’t want.

Very pleased with this holster. Picked it up for a g19. Conceals very well. This rig is held very tight to my body with the paddle, haven’t tried the belt attachment included. The gls is great, very ergonomic.

My gun isn’t coming out unless the thumb drive is activated. Material is awesome. Rubbed on my gun and no marring on gun or holster. If you open carry and don’t have a level 2 retention system be responsible and try this out.

If you need a duty holster this will work. Safari land has multiple attachment option from molle, to drop, to drop leg, even vehicle mounts. So this is a very versatile holster. Price is half of a good custom holster with the same versatilty options.

Had previously used this brand holster in a professional role, but not with a paddle and slightly different lock release. Very snug weapon fit, but not too snug (it is adjustable). ALS action is very intuitive; one fluid motion to grip, release the lock and draw.

This particular holster was recommended by an FBI and former SWAT team friend for CC. I was skeptical at first; thought it would be bulky and visible, considering it’s worn outside on the hip (paddle inside between underwear and pants, holster outside pants, held by a mechanism that hooks under the belt to hold holster in place while drawing).

Wore it around the house all day to see if my very observant wife would see it. Passed the test. Had been warned that I’d likely try four or five holsters until I found the proper holster to fit my needs.

Not so; got it on the first try. Buying one for my son.

I love this holster! I have the coyote tan/FDE colored version of the 6378. but this is for the plain black, which is the best, especially if you have to use it professionally. The model 6378, for the Glock 17/22 can also be had with Safarilands proprietary fabric wrap.

The fabric is for disruption of color to promote style camouflage. But in my opinion paying nearly $100 or more for the 6378 ALS USB(the multicam version) is silly. Buy the black one! This one! And then get a QLS fork so you can swap it between belts and plate carriers.

awesome holster! It clicks upon insertion. And is easily released with the thumb using the SLS nub. It is extremely secure, holds close enough to the body for Concealment during winter coat weather. Is retained well enough to wrestle someone and not lose the weapon! The Safariland STX and SafariSeven materials are some of the finest quality polymer products that are available.

The Safariland ALS is the best auto-locking holster ever invented. And is only rivaled by the SLS(Self Locking System, -which is the hood,) and the ALS has the modularity to be installed with an SLS if needed.

Making it a level 3 holster. This holster as stands is a level one retention It has a sentry knob which can be purchased from Safariland which turns it into a level 2 retention holster, and tightening the tension screw in conjunction with the faux safari-Suede lining, which makes its so the gun must be drawn straight from upward only,(and protects the finish on your Glock! Buy this holster.

This is my 7th ALS holster. It is the only OWB kydex/non-leather holster I use or recommend. When you use the included security nub it makes the holster almost impossible to remove without extreme intention.

Ive used it for mounted patrol on both horse and atv/bike. The paddle can be removed and use with either a belt slide adapter or dropleg option. This model happens to also accept NIGHTSTICK WML, both the 350 and 850.

The fit is good. The thermoplastic is a different feel than kydex. It’s a good different. I noticed that the mag button is not covered; however, I have not had any problems with that yet. I don’t think I will have a problem with it either.

The holster is comfortable, definitely more comfortable than kydex. I love the fact that the holster allows one to tuck in a shirt. Also, another great feature is that there is a small part of the holster thant pulls the weapon close to the body.

This small part is well thought of and is definitely better than the claw that’s found on another system.

The Klipt IWB holster I received is impressively close fitted and covers the entire frame of my S&W 442. 38 SPL snubby. Worth the money. A safe holster, I believe. The grip extends above the holster allowing a full grip before drawing.

The drawstroke must be straight out the top of the holster, the gun will bind up and catch and not release if you pull the slightest bit diagonally. My favored belt position, 3:30-4:00, is most comfortable for me, usually.

I’m trying out the front 2:00 ish IWB. A bit easier to perform the required straight up draw, for 64 year old shoulder joints. It’s all good.

I purchased one of these back in Sep 2017 for my SCCY CPX-2, 9mm, after shopping around, and reading about people buying several holster’s before finding one they really like, I felt pretty lucky as my first one fit like it was custom made for me.

I decided to start carrying my Springfield XD-40 Subcompact, so the holster I wanted to get was an easy decision, I received it yesterday, and I love it as much as the first one I bought from you guys.

It holds my gun like a glove,but allows me to access it without any problems, just like the the SCCY, it fit great right out of the box, without any adjustments, although it has plenty of adjustment point’s on it.

A great product at a reasonable price, I am a customer for life, and would recommend these holsters to anyone that carries concealed like I do. Keep up the good work guys.

Very comfortable right out the box. Easy to tune to your personal taste. Never had a double clip iwb before. Will never go back. Belts clips work great. Holster is stiff at first, hey its new, after wearing a couple hours it conformed to its new location nicely.

Very nice retention, not worried about firearm falling out. All in all its quality, at this price its a steal, feel guilty, kinda. Will be purchasing one for all my pistols now. Thank you.

Good fit, Very Adjustable, Quality made, Comfortable IWB Holster. Allows ease of access and maintains concealment of firearm. Also allows for a good combat grip. As a firearms trainer I would highly recommend this holster.

Dont let the inexpensive price fool you.