21 Best Internet Extender For Xfinity (2023 Updated)

The Good: Wifi Speeds were amazing. Nice looking units that fit in nicely on a shelf with existing decor. Easy to do address reservations and port forwarding. The Bad: Limited Features. The router determines whether a device uses 2.

4 or 5ghz signal. Might be great for a regular user, but to me this is annoying because my new iPhone can connect to either, so the router placed it on a 2. 4 channel that yielded slower speeds and there was no way for me to change it like I can do with my old Nighthawk.

It has known compatibility issues with wireless Amcrest cameras (wish I would have known that since I have a system built around Amcrest), Satellite Signal Drops from base station constantly. I bought the system that has 3 satellites and live in a 4,000 sqft house yet they kept disconnecting.

App Issues – It took 3 hrs to get the app to work correctly to finalize setup (I have a nighthawk and am used to the app and it still gave me issues), The other issue with the App is that if you change a device name, it doesn’t translate to the Embedded UI.

Device connectivity to the satellites is an issue because when booting up the system, it seems that the router boots before the satellites thus having everything connect to the base (router). It would be nice if you could also manually move devices to the appropriate satellite, but you can’t do that.

I had a satellite in my finished basement that next to it was a smart TV and a Google Home, both of which would not connect to the satellite next to it, they connected to the router 1 level up. Very frustrating.

I read some blogs about turning signal strength down and that seemed to help, but my wifi range suffered in other areas. I have over 50 devices connected to my router between wired and wifi. I don’t think Orbi liked that many devices (35+ continuously active).

I also read about ways to get Orbi to communicate better by disabling MU-MIMO, but to me that defeats the purpose of a state of the art router. Lastly, Netgear Armor destroyed my connectivity and streaming capabilities.

In theory it was a great idea, but once I disabled it my speeds and streaming ability improved. I like Netgear products, but this one wasn’t for me. I went back to my Netgear Nighthawk X6 R8000 and it performs twice as good with my devices than the Orbi did (even thought I’m comparing Wifi 5 to the Orbi Wifi 6 which doesn’t even compare speedwise).

I think my next step will be the newest Wifi 6 Nighthawk Router. My advice is to do more research before buying Orbi if you’re a power user.

I purchased this product after seeing multiple positive reviews on tech review sites. There were some negative reviews on Amazon but there are always a few. I should have listened to what they said. When the Nighthawk Mesh extender arrived, I followed the installation instructions using the Nighthawk app.

The QR code didn’t scan correctly so I did a manual install. Unfortunately I had to stop when it mentioned using the “included” Ethernet cable, which wasn’t included. I then configured it using the WPS approach but none of my devices received any signal despite the extender appearing to transmit.

On my iPhone, I kept getting a separate security certificate error message and it didn’t receive internet either. I tried to go through the reconfiguration steps several more times and then called tech support.

After being on hold for almost an hour, I was connected to someone who said I needed to speak to a specialist. I was on hold for 30 more minutes. By this point, when I checked my computer, it seemed to be receiving a signal.

I couldn’t check my phone because I was speaking on it, but the tech support person said that the error message I got was nothing to worry about and it shouldn’t appear again. But the next day, it did and I couldn’t send email from my iPhone without shutting off the nighthawk extender.

I looked online for solutions and apparently this is a common, known problem with this extender and Apple products. All of the “solutions” being suggested on the community forum involved significant admin level changes to fix and many seemed to weaken network security.

As an IT professional, I’m perfectly capable of doing complex command language level changes, but not if it compromises my network security. Consequently, I ended up returning the product. The return process seems to have gone smoothly but I’ve not seen my charge refunded yet so I’m reluctant to say that it’s too easy.

Overall, I’d recommend going with a brand other than Netgear especially if you have Apple devices that you need to connect.

I bought this system because a friend of mine has it and because of the Netgear name. I have even talked a friend of mine to purchase this system on Cyber Monday which he did but was only able to purchase the Router and 1 Satellite instead of the two because the Cart would add it but when you try to go to the next step the cart was empty.

I even tried to purchase it for him and had the same results. I told him to purchase the Router and 1 Satellite to have this system at the reduced price. So I have tried to install the Router several times now and have had no connection between the Modem and the Router.

I have tried to power them up, unplug everything, used a different ethernet cord, moved the Router to a different location and still everything I tried the Router doesn’t connect to the TDS modem with an IP address.

The TDS Modem does put out TCP/IP to things that get plugged into it so I know that the TDS modem is working and that the ports on the back of it work. The TDS modem is a WiFi modem and I do not know if this is an issue but it shouldn’t be since the Netgear Modem is getting plugged directly into the TDS modem.

I do not know if my Netgear Modem is bad because the only way to trouble shoot this is to take it to work and plug it into that network to see if it can obtain an IP from that router. The person (friend of mine) who talked me into this system says that it one of the best and that he has no issues, my friend that I talked into buying this system is in his late 60’s so I guess I will have to go to his place and try to set his up because he is unable to, I think it is more that he is not a Techie so things are harder for him to do.

All in all, I wish I wasn’t having these issues because I believe that Netgear makes great stuff, I have bought Netgear back in the 1990’s when I hosted LAN party’s because they where the best, I hope that the issue is with TDS and not this unit but with the testing that I have done it is pointing to the Router and not my TDS modem.

I received this extender as a present a few months ago. Finally I decided to try it because my with EX6100 doesn’t reach my rear yard. I am very happy with my EX6100. It does what it supposed to do and I can always get into the user page to modify settings.

The EX3700 is a nightmare. I lost count of how many times I have factory restored it and start the setup from scratch. I reached out to the customer service and I was told I needed to buy a service package because I was past the three-month period.

The representative had a very thick accent and I can tell he was reading a prompt. I am positive he doesn’t know how the item works. After many attempts, I was able to set it up. I get signal to my iPad, and even though the extender most of the time has the top-left light red or yellow, the signal keeps coming through.

I think the hardware is damaged. I would not recommend this model. Get one that lets you get into the user/settings page every single time and avoid the frustration.

I bought an EX8000 extender in August 2019 so it is out of the hardware warranty and out of support warranty. Last week all the front panel LEDs started flashing white at a 1 Hz rate. I tried cycling the power several times and attempted a factory rest 3 times following instructions in the manual.

I called tech support and was told that they “might” be able to solve the problem for a fee. The fee starts at $49 and goes up to $139 (I can buy an replacement for $120). I believe that the problem is most likely to be caused by corrupted firmware (I didn’t update the firmware, but Netgear may have pushed an update), but it doesn’t make sense for me to spend money for tech support and waste hours of my time trying to get the problem solved.

This wifi coverage has been less than ideal and if have had to restart the extender several times after it lost communication with my router. I have owned other Netgear products and none of them have met my expectations.

I expect to get more than 2. 5 years life out of these types of devices. I will replace this useless brick with a mesh router from another company to get better coverage, reliability and support. I doubt that I’ll buy anything from Netgear in the future.

I got this extender a few years back and couldn’t get it to set up in the home I was in. Ended up leaving it in the box for a long time and had a need for it in my new place. I was the owner now so I had more ability to troubleshoot the setup.

After a few hours of frustration I called the help like and they tried to get it going. I don’t remember the issue, but I had to change some setting and figured it was easier to get that fixed and then return the call to the help line.

Few weeks passed and I thought I had the setting fixed, so I tried to set it up alone again. It seemed to connect, but I really couldn’t tell much difference in speeds, so I left it on not sure. The app wasn’t much help either, it kept trying to connect to a router that I don’t own and said it wasn’t found.

I was about to delete the app when there was an update and I gave that a try. As soon as it finished I was able to see the extender connected to the internet and it showed what was connected to it directly.

Amazing update I guess, but it made my setup much easier and verifiable. Since then I have moved the extender to a better location to provide better, more consistent Wi-Fi throughout the house. Still can’t tell if it’s really much better or not, but it seems to be ok.

After 7 hours on hold with Netgear support, being connected with the special trained support for extenders, posting a request for help on the Netgear forum and submitting a request for support, I have given up.

extender support wasn’t sure. The forum asked a question that I answered and never heard back and the support submitted sent me an email saying I would hear back soon, but never did. So here is the deal, this extender can take a wifi signal from the router and seamlessly extend the distance.

As you walk through the building you just go from one to the other and never knew your changed. It can also take a signal from the router through and ethernet cable and use that signal to create a point of access.

An access point is a totally different connection that has to be switched, so not seamless. I have a firewall and some interference between where I have the modem and extender and I cant move it closer to the router.

I wanted to bypass the area with an ethernet cable. Since the extender takes a signal from ethernet or wifi, I should be able to extend the signal through ethernet instead of wifi. Nope. Top of the line R9000 router and EX8000.

I have stumped the experts with this one. I got, I dont think so, Its not smart enough for that and Let me check. So again input can come from ethernet, output can be an extender, but no one can tell me how to use those two components together.

The closest I got to an answer was “I dont think so” and there is no way I can figure out how to do it in the settings. wifi-extender. ethernet-point of access. Seems like a big oversight.

IšverstiShow in original languageI’ve had 2 of these little guys and at first I have no complaints. For under $30 they work fantastic and cover the area I need but now the 2nd one just quit after 3 months.

Even the 1st only lasted just over a year but that was me only plugging it in when needed so it really only lasted about the same amount of use time. Hoping I can get a replacement under warranty for this one, otherwise I think next time I’ll spend a little more for hopefully a longer lasting one.

Have been overall satisfied with other Netgear products but I’m not sure what’s happening here with these.

IšverstiShow in original languageI got one for my daughter room in January and she like it. So far her Apple laptop work great, rest of the house had next to no internet so frustrating. I didn’t want to interrupt my child classes online so I was not gonna use the extender for test of us.

But my frustration grew by March I had it, so ordered another on for the other side of the house. Connection was not hard because we already had one connected to the cable wifi. So far so good only have lost connection few times but for brief min.

Thank you!.

Absolute garbage. I only looked at all the 5 star reviews when I purchased. Wrong on my part; they’re probably all fake. This device literally DOES NOT WORK. Caused s lot of aggravation. I even tried hardwiring it via Ethernet.

Couldn’t even be found through Ethernet which told me, it’s definitely a bad, poorly made device. Don’t waste your time like I did! So upset, returning immediately and not even repackaging it the way it cans because I don’t want anyone else getting stuck with it.

I’ve been struggling with connectivity since relocating home for my job due to COVID. My home office and children’s continual streaming has really dragged my router down. I purchased this product in hopes of alleviating these problems and WHOA was I impressed.

First off, it took under a minute to set up with the exceptionally easy button. It synced with my router in seconds (literally) and began boosting the signal immediately. I.

Rapidité de reconnaitre ma WIFI 6. La box maintenant marche bien plus de décrochage j’ai toutes les barres. une rapidité et fluidité remarquable. Seul chose qui m’étonne il chauffe un peu. Je vais maintenant prendre un deuxième répétiteur pour ma troisièmes box PS: J’ai une maison 160m2 à étages avec dalle en béton et cloison en parpaing creux si ça peut vous aidé.

Produit facile à mettre en service. Répond parfaitement à ce que je souhaitais : wifi dans toute la maison qui est ancienne avec des murs très épais.

Installation relativement facile avec un peu d’attention, une étoile en moins car perturbe fortement les communications téléphoniques sur portable dans la même pièce(interruption de l’appel ou correspondant qui n’entend pas), problème confirmé en changeant de place ou en déplaçant le répéteur donc question à voir avec le SAV.

IšverstiShow in original languageI wrote a bad review before (and asked to remove it) mostly because of a bad interaction with ‘support’ person, who ran diagnostics on my computer and offered some expensive products to help me make this extender work.

Turned out it was not a Netgear support person but a scam. Luckily at that point I realized it and did not pay anything. Beware, there are many scammers who pretend to be Netgear’s support. They use slightly different URLs and similar colour schemes on their websites.

Only call the number in the manual for support, and if you see a support online chat it’s a scam (Netgear doesn’t have it). I WRT the product itself: setup wasn’t easy (that’s why I looked for support and fell into that scam).

When I connected to the NETGEAR_EXT network on my laptop it got me to the right page but I was unable to complete the process because the network kept dropping. Finally, I switched to my phone and then it worked.

Once set, the extender seems to do the job.

IšverstiShow in original languageThe extender works fine – its the greasy scummy technical service that I would rate lower than a 1 if I could. I recently moved and when I needed to change the Network name on the wifi extender – I couldn’t figure out how to change it.

I called technical support – which tells you straight out they expect you to pay for their help by buying a scum sucking grass tech support CONTRACT. I used chat instead, which led to a technical support guy calling me.

He wanted to get on my computer screen using a screen sharing program – which was totally unnecessary then tried to prove to me that I should BUY at a price of 99. 99 149. 99 or 299. 99 a security protocol for my IP address.

He claimed that it would be impossible to set up the wifi extender without this. I refused, went to the product and hit the RESTORE FACTORY SETTINGS button and was able to set up the extender as I always have.

The product works fine — its the SCUM SUCKING GREASY MONEY GREEDY Technical support that is SHAMEFUL.

IšverstiShow in original languageBought this one today, after my ancient Netgear repeater finally bit the dust. I’ve set up many routers, access points and repeaters since WiFi was first deployed and this has got to be the easiest and fastest setup I’ve ever experienced.

Literally plugged it in, connected to the internal network, told it to repeat my existing network, put in the password and voila! Done. Getting great throughput from it all over the house (1550 sq. ft).

I couldn’t be more pleased! Especially considering I dropped about $150 on the last Netgear repeater, this is a GREAT value for money! I’m considering buying a couple more in case they discontinue these.

even though any newer models would probably perform the same, I KNOW this one rocks!!!.

I’ve been trying to eliminate 2 connection issues upstairs in 2 guest rooms. 1 on the N. Side and the other on the S. Side of the house with allot of buffering while trying to stream Netflix, Hulu, and so on.

Completed my homework and chose this WiFi extender and dumped the old one. I was honestly expecting to be let down because boatloads of products always claim to do allot and never actually work. Well, so far so good time will tell if this extender holds up.

The directions were pretty straight forward to complete set up. The key is 4 green lights with the best location for optimal performance. I had to move it around about 4 times and found the best location! I placed it above an arching window in my den downstairs that’s in view of the room above the garage.

From the room above the garage you can see the extender at the top of the window on the ledge. Netflix and the other wireless apps on the smart t. v. And FireStick are connecting and now streaming without buffering! A headache solved.

Give it a try, be patient and move it around until you find a spot lateral to the router and midway From the room with connection issues. This for me was on the ledge of the arching window. The first three locations had all green lights but the signal had too many barriers to go thru! Try to find a spot with the least amount of barriers and I believe you’ll be successful as well.

So far, So Good!.

IšverstiShow in original languageI purchased a second one as tests showed it extended the WiFi range of my internal 4G WiFi network much further than my non-TP extender. You can buy one that extends both your 4G and 5G internal WiFi networks but this is more expensive.

If you are having problems with the WiFi range of your internal WiFi network, it’s best to you ensure your various devices are switched to use your internal 4G rather than your internal 5G wifi as the internal 4G WiFi network extends further than the internal 5G network.

This does not effect the use of suppliers external 5G networks.

IšverstiShow in original languageWare wurde schnell und ohne Beschdigungen geliefert. Die Einrichtung ist unkompliziert, die beigefgte Anleitung (Faltblatt, englisch) vllig ausreichend. Die Extender werden im Betrieb aber deutlich warm – auf Belftung achten.

Gut, dass die Extender neben der WLAN-Funktion auch noch je 2 LAN-Anschlsse haben. Mittels Phasenkoppler auf verschiedene Stromkreise (Phasen) aufgeteilt – funktioniert. Insgesamt eine vergleichsweise preiswerte Lsung.

Fr meine Belange mehr als ausreichend. Wer mehr Geschwindigkeit und Datendurchsatz braucht, kann ja auf die Gigabit Powerline Adapter vom gleichen Hersteller ausweichen. Von mir volle Sternchen-Zahl!.

IšverstiShow in original languageInternet speed tests now consistently show poorer results when this device is plugged in. No idea why. Our son set this up for us. All the blue leds are on, as they apparently should be.

The differences are not huge, but they are not in this units favour – plugged in they are around 10 for download and 7 for upload. Unplugged? 14/9. Both sets of figures are poor. We only began to notice over the later part of lockdown, so the amount of traffic may have something to do with it.

The online manual is a horrifying mess, the exact and precise opposite of plug and play. Looking at it makes my heart sink. Even if you do set it up correctly, plainly it doesnt necessarily stay that way.

Resoundingly NOT recommended. And I challenge all those who thought this was beneficial to at least try switching it off and see what happens.

IšverstiShow in original languagePlug it in near the router, press the WPS button on the router snd the WPS on the TP-Link, wait about 30 seconds, repeat the procedure for the 5ghz frequency (if you have it, if not dont bother).

Move it then to a socket not too far away from the router, wait a couple of moments and job done. Much easier than I expected; took no more than 10 minutes to set up. Instructions are very clear and easy to follow.

Coverage is excellent: the erratic signal from the router is perfect now in those parts where it would come and go and be regularly interfered with by neighbouring routers. As I move around the house, devices switch automatically from the original router to the extender and back.

Doubtless, there will be some situations, eg big house and/or many and thick walls, where the coverage might not be adequate (buy a mesh system for that, perhaps), but for most domestic users this gadget will be more than enough.

Only a small criticism: the device is larger than the pictures suggest and you need to ensure enough space around the wall socket when the aerials are extended.

IšverstiShow in original languagePurchased to help get a better than marginal signal to the kids bedrooms for online school. Bought a different brand and after hours of fighting to set it up, gave up short of throwing it over the fence and returned it.

Picked up this guy instead with zero expectations after my last experience. This was up and running in about 5 min. App set up was very easy and quick. Seems to be working just fine at first glance. Signal in the kids rooms has gone from weak to strong and videos are downloading fine where they wouldn’t before.

One device isn’t connecting (Roku) but that’s the only hassle so far.

IšverstiShow in original languageWarning* This router is a good value on sale. Fast speeds at the other end of a 500m2 house and the router is halfway between the front and back. Easily reaching a stable 30+mbps.

The benefit is fast speeds and a solid wifi connection. The negative is the set-up. Unfortunately the house is connected with Optus and the router doesn’t play well with mesh extenders. Thankfully, this device can disable the mesh functionality through the app and operate as a sole extender.

I believe the issues others are facing can be linked back to this issue as the reason I got this was because the optus mesh extender that was provided didn’t even work properly.

IšverstiShow in original languageNetgear Ex7500 is really hard to connect to my Netgear Nighthawk router. I followed the Netgear instructions pamphlet and linked to its website for Netgear installation assistant.

I was told by Soft Tree Tech. , Inc was the authorized tech support for Netgear. So I paid $149. 99 to fixed the connectivity of my new extender and my router. 2 days later when I reboot my router I lost all WiFi connection on my devices.

I had to go through Soft Tree again in order to make it work. This time Soft Tree technician advised me not to perform any basic setup on my own but always have their technician to do the work. At that moment, I realized that I had actually lost control over my own router and Soft Tree had complete access to my Netgear admin account with my password.

I became very concerned about my internet / computer privacy being compromised after speaking with Soft Tree’s adviser. I contacted Netgear by phone again and was later told that Soft Tree was not an authorized support provider.

I researched and decided to replace a new router and return Netgear Range Extender EX7500. I just wanted to make sure things are secure. I was surprised to see so many customers got scammed by Soft Tree Tech.

, Inc. in Netgear Community Forum. My question is how can a company pretend to be Netgear and be allowed to con clients into forking out $149. 99 when they could have got support directly from Netgear for free under 90 warranty support?.

I purchased the Netgear AC 6120 because my Xfinity modem was not allowing my Epson WF 7520 Was not being allowed to mean he was the router do the some security measures. So I purchased in Netgear AC 6120 Extender/repeater Because it will allow me not only to communicate with my printer was 24 other devices! And call me important or the following benefits 1.

) Once you register your device For the one year TECH support. You login with your original screen name and password then then you log on to the AC 6120 extender/Repeater look for your screen name with the abbreviation EXT Selected login with your original password for the morning and I also do the same with my laptop to ensure the communication with my printer Epson WF 7520 with no problem.

2. ) if you need to relocate the AC 6120 extender/repeater you could do that with no problem. Unplug it find it the outlet do you want plug it in there wait 3 to 4 minutes for the morning to Reconnect.

Cannot do this with other extenders/Repeaters I have tried. in the price range with Netgear products such as the AC 6120 extender/repeater is not only reasonable but very well worth it! And I am very much like the size of the AC to 6120 extender/repeater.

And I’m very glad that they have a ethernet port that you can use for gaming or other devices that need Internet connection. And you could use the light indicators on the AC 6120 extender/repeater to help you find the best location for the AC 6120 extender/repeater to pick up the Wi-Fi signal from your modem if the light is Red that is not a good place if the light is Amber that’s a good place if the light is green as the best place.

And usually best to have the AC 6120 extender/repeater somewhere about halfway between your modem and the Area where you want to enhance your Wi-Fi signal. I am very glad that I was able to find this Netgear AC 6120 extender/repeater.

I asked my cable provider to help me with this issue for four months and they could not help me resolve it at all. But I happen to speak to a friend who recommended trying the Netgear AC to 6120 extender/repeater!!.

Three problems on firmware V1. 0. 0. 54_1. 0. 34: – Dropped connection between laptop and extender regularly (light on the extender turning from green to red), once per day at least. – Intermittent traffic – on Windows 10, in Task Manager Performance, could see that a few seconds normal traffic, a few seconds 0.

– Signal strength is very location sensitive. I live in a house with common construction for this part of central North America (wood frame and drwall), so no concrete or steel structure for the signal to go through.

Maybe the steel ventilation ductwork interferes in places. There is a huge difference in the signal strength and connection reliability (my previous two comments) depending on where I site this extender.

I even resorted to plugging it into an extension cord and moving it around a room a couple of feet at a time, without moving my laptop (or router. ) Some spots had better signal strength and fewer drops than others, but none was trouble free.

I’ve never seen another wifi device so sensitive to location. I worked with support, who gave a few ideas, but nothing helped. I stopped using it and went back to using my wifi router which worked much better, but I got an email recently that there is new firmware.

I just loaded firmware V1. 0. 0. 64_1. 0. 39 (Oct 18, 2021) and will try again. I will comment again if there is any improvement.

So far it works well. It can cover the wifi range to make the weak points within my house far better than before. The only shortcoming is its app setup procedure. I used the nighthawk app to set it up.

At the very beginning, it has its own network and my phone needs to connect to its own network to set it up. It worked well, and after all wifi settings mostly finished, I noticed that a firmware upgrade is needed and clicked upgrade.

However, after that the app still shows the original set-up is not yet finished, and at that point I can no longer connect to its own network to finish the setup. So now the app is stuck there and I cannot do any further.

But anyway the box can work its extender function well, and after I moved it to a different location it works as expected, though I cannot continue setting it up anymore. I think there is some bug with the app software.

I guess next time, if I change my wifi router with a new wifi username and password, I will need to click the reset button to recover it to the original factory setting and do this from the very beginning, and the nighthawk app also needs to be reset.

As of now, I do not need to worry, and should be able to enjoy its extender function.

IšverstiShow in original languageNeeded internet access in an outbuilding which was in direct line of sight, through a brick wall, of the router but too far away for WiFi to reach (20m). Had spent days looking online at dual band and tri band, WiFi 5 and WiFi 6, which really confused me and the variations in price and reviews were bogging me down.

Decided to just give this a try as it was on offer. It works! Initially placed (10m) halfway between the router and where I wanted the signal as instructed, the device lit up green suggesting good connectivity but it didn’t give me the improved range I wanted so moved further away.

At 16m away, still green, the coverage and speed was much improved but not good enough for high speed gaming. At 27m away, the signal was now red and it suggested I should move it closer to the router, however the speed is now as good as it is in the house and perfect for gaming (and watching Netflix) through the extender at the same time! Our pc was connected through 2.

4ghz and the Netflix through 5Ghz. As a bonus, I can also connect to WiFi, right down the garden another 15m further on from the extender which is 27m from the router! Technical stuff – I have WiFi-5, dual band (should say on your router whether it’s 5 or 6, or disconnect and connect to your WiFi and if it says WAP-5 then it’s WiFi 5, if you have the option of 2.

4 and 5Ghz then you have dual band – if it doesn’t show on your router, type 192. 168. 1. 254 into the internet search bar and use the passcodes on the back of your router to log onto your router control centre and it should tell you under ‘my devices’).

I doubted whether the tri-band devices would work with my dual band router which is part of the reason I purchased this extender. I’d happily buy another at full price now and have recommended to family and friends.

IšverstiShow in original languageHe comprado este producto recomendado por los vendedores de la tienda, pero no me sirve para nada. Después de configurarlo varias veces por si la primera lo había hecho mal, me da los mismos resultados.

La señal del Wifi es peor a la que ofrece mi router. Para un piso de 70m con una distancia a cubrir de 8m entre router y ordenador, poniendo el repetidor al lado del router, entre medias o al lado del ordenador, el resultado es el mismo.

Me llega menos señal que si me conecto al router. Pagar 50€ por algo que empeora mi conexión ha sido un desacierto, mañana mismo lo devuelvo. No lo recomiendo para nada, quizá a ti, quien sea que me estés leyendo, si te sirva y te vaya de maravilla, pero mi experiencia ha sido muy mala.

Una decepción para tantas expectativas. @kokepk.

ottimo prodotto

TraduciMostra in lingua originaleJak dla mnie bardzo dobry wzmacniacz. Pokrótce problem jaki miałem: dotychczas u mnie w domu pracował tylko jeden router od dostawcy Internetu, który zasięgiem pokrywał 3/4 mojego domu.

Dodam, że dom jest piętrowy o pow. ok 200m. , router umiejscowiony pośrodku skrajnej zachodniej ściany. Z zasięgiem najgorzej było w pomieszczeniach wschodnio-południowych. Zakupiłem nowy router tp-linka Archer C80 i w połączeniu ze wzmacniaczem RE300 utworzyłem sieć mesh w domu.

Wzmacniacz umiejscowiłem naprzeciw routera pośrodku skrajnej wschodniej ściany – odległość między urządzeniami 9 m, po drodze dwoje drzwi. U mnie te dwa urządzenia wystarczyły aby pokryć zasięgiem cały dom – dociera nawet do piwnicy Jak dla mnie rewelacja! Co do parametrów samego urządzenia nie będę się wypowiadał, gdyż można sobie o nich poczytać.

Natomiast najistotniejsze rzeczy jakie zauważam z punktu widzenia zwykłego użytkownika: zdecydowanie lepiej działa sieć 5Ghz, pod warunkiem, że wzmacniacz ustawiony jest na maksymalny zasięg. Tak na prawdę nie ma wtedy praktycznie żadnych spadków prędkości – wszędzie, gdzie mierzyłem, byłem w stanie uzyskać prędkość w granicach 120 Mb/s i takie też mam łącze.

Gorzej jest ze siecią 2. 4 Ghz, która na wzmacniaczu osiąga prędkości mniej więcej o połowę mniejsze niż na routerze. Tak więc gdy z routera uzyskuję jakieś 70 Mb/s w 2. 4Ghz, to na wzmacniaczu jest już ok 35-40 Mb/s.

Niemniej jednak jest to dla mnie wynik bardzo zadowalający. Urządzenia podłączone do sieci działają szybko i bardzo płynnie, bez zawieszania się, buforowanie platform streamingowych na dwóch telewizorach niezauważalne.

No i dla mnie wisienka na torcie: dzięki onemesh mam w domu jedną sieć mimo dwóch urządzeń. Zakup uznaję za udany!.

TraduciMostra in lingua originaleThe device found a signal with no effort and I’m in an area where that seems difficult. I haven’t been able to use my cell phone in the living room and using my laptop just a room away (in a small condo) from where my hub is was iffy.

Streaming to my TV. not happening. Therefore, I was happy when after pairing next to the hub, I was able to move the TP-Link to my hallway. I had a good connection on both bands within a minute. Results: I can use my cell phone sitting on my couch and I have a good signal at my dining room table (MacBook pro).

——— I had to do some finagling to establish the link to my hub to begin with. This is an Apple AirPort (model is about 8 years old, attached to an 8 year old iMac). Some persistence and I had a connection established but I’m fairly adept at setting up Macs including dealing with permissions, etc.

I don’t know if it’s the age of the AirPort (and computer) or that Apple devices can sometimes present a challenge, as opposed to a PC environment. At any rate, I did get it set up and working, so all’s well.

This was not an easy installation. The instructions and online manuals simply were not accurate. What was supposed to happen as I completed steps in the installation did not happen, so the choices the instructions provided were irrelevant.

I called LinkSys help operators to get instruction. My first four calls ended when I was cut-off – sometimes when I had been told I was going to be transferred to another person, sometimes simply in the middle of conversation.

Each call, including the fifth, I was asked to go through the entire installation process from scratch even though it resulted in the same exact failure every time. It was often right after this failure when I would be cut-off.

The fifth operator stuck with me and eventually – after installing updated firmware that the installation program indicated was not needed (or even available) – the unit did finally work. In the end, I spent over 3 hours on the phone to LinkSys to get this installed.

By that time I was angry and frustrated. But it does work now. I have been using my extender to reach WiFi devices at the far end of my home and it has been stable since installation almost a month ago.

So I am gradually forgetting the nightmare of installation and am basking, instead, in my ultimate success. I have not had to think about it since installation. Once WiFi devices are connected to the repeater network, it simply works completely transparent to me.

No glitches. Even after a power failure to my house, it came back up without any effort on my part – everything functioning as before the power outage. I have noticed no network slowing. Devices I am using through the extender include a large screen smart TV, a laptop used primarily for streaming video and an outside security camera.

I have no idea how competing devices might install or perform relative to this one. I can conclude that this device was a monster to install, but seems to work well once that hurdle was overcome.

What a stupid waste of time this purchase was. I bought this for the other side of the house where the Wi-fi doesn’t reach. So we had one goal in mind: extend the Wi-fi. Tried setting up via a LAN cable from our main router.

I got a signal indicating we had connected but the extender could never connect us to actual websites. Tried to reset to factory settings and use it as a standard extender. The extender doesn’t reset period.

I’ve tried tapping the reset button, holding it briefly, holding it until the green light comes back. Nothing. Useless. Returning ASAP.

This WiFi Range Extender (EX3110) was easy to set-up with an online assistant that walks you through each step. The extender is very convenient– I can unplug it from one part of my house to plug it into another part quickly, and it begins extending WiFi approximately 45 seconds to one minute after being plugged in.

One notable drawback is that the WiFi extender noticeably decreases the efficacy of your router/main network. I live in a college house of 9 people, and the 4 individuals who live in the unit where the router is located have noticed their WiFi become slow and ineffective when all myself and 2 others use the WiFi range extender from our own unit.

I have set up the extender in two separate locations of the house, with each location having drawbacks: when I set up the extender close to my room, my WiFi has 3 bars and is very fast; however, my roommate’s WiFi on the other side of the house is essentially down/not working.

When I plug in the extender halfway between my room and my roommate’s unit across the house, all of our WiFi works moderately well, until all 9 of us are using it, in which we have very patchy WiFi. Overall, this product is effective and easy to use.

Beware if you plan to use it in a house with more than 8 people connected to one network; it may be possible to find a solution by moving the extender to different areas of the house, but you may be better of with a mesh network system.

Seems to work well so far. My TP-Link WiFi router is towards the front of the house, so at the back of the house inside the signal was low and outside there was no signal. I placed the Extender more towards the back of the house than the middle, where it still gets a full signal from the router plus increases the signal on devices at the back of the house to 100% inside and 60% outside.

Setup was easy following the instructions – I used the online instructions and did the setup manually as this was recommended in a video I watched on YouTube. But I’ve read other reviews saying the automatic setup works too.

You do have to be aware that the Extender has a separate name and therefore separate connection compared to your main router. You therefore have to swap between them in order to get the best signal depending on which part of the house you’re in.

I use the same password for both connections to make it easier to swap if I have to. But my kids are mainly in the back and middle of the house, so they just stay on the Extender connection and I’m in the middle and front of the house so I stay on the main Router connection.

So far there has been no detectable loss of signal to devices connected to the Extender although occasionally the LED turns to red but the devices are still showing a connection. Happy with this and the good price I got from Harvey Norman at the time of purchase.

J’ai acheté ce répéteur car on branche plusieurs appareils sur la même bande passante, et que j’ai 3 étages chez moi. on l’a mis au 1 er et franchement mes enfants arrivent à jouer avec leurs consoles, on a une meilleure connexion.

l’installation est très facile on peut le faire de 2 façons soit avec un ordinateur ou avec wifi WPS. il suffit de le brancher sur une prise et d’attendre le voyant vert. on est content de notre achat car plusieurs appareils sont en WIFI malgré la distance avec le routeur.

super achat.

J’avais déjà des Deco P9 et ayant une zone blanche dans un garage, j’ai profité d’1 promo pour compléter mon installation. L’installation est très simple. L’appli est bien pensée. Le design de celle ci fait vieillotte à mon goût.

IšverstiShow in original languageRange extender spisuje się bezproblemowo, jest łatwy w konfiguracji. Nie ma żadnych wodotrysków, ale nie o to przecież chodzi. Posiadam już dwa takie urządzenia (starszy i nowszy model, nieznacznie się od siebie różnią) i oba spisują się znakomicie.

Urządzenie może pracować w trybie range extender (czyli zwiększać zasięg Wi-Fi bazując na sygnale Wi-Fi z innego urządzenia) lub jako AP (podłączony do sieci kablem Ethernet). Niestety nie można go używać jako Client AP (czyli połączyć się z siecią po Wi-Fi, a udostępniać dalej po kablu), ale cóż, urządzenie jest proste i tyle.

Dzięki wbudowanemu gniazdku nie tracimy gniazdek do dyspozycji.

IšverstiShow in original languageTP-Link repeater sind im allgemeinen meiner Meinung nach recht gut ABER: Es gibt verschiedene Hardware Versionen, d. h. wenn man Ihnen eine ltere Hardware-Version verkauft, ist diese in der Regel schlechter als die Aktuellste (im selben Gehuse) – Nur auf die neueste Hardwareversion kann die aktuellste Firmware aufgespielt werden.

Ich habe inzwischen den dritten TP-Link repeater probiert und BEI ALLEN AUS EBAY bricht irgendwann die verbindung ab, bei diesem Modell muss man ihn sogar jedes mal neustarten. Vorallem bei verwendung mit neueren Mobilgerten (Handy/Laptop) die wenig sendeleistung verwenden – in Kombination mit der erwhnten veralteten Hardwareversion – und am schlimmsten – noch niedrige Sendeleistung im repeater eingestellt, gibt es Hufig probbleme.

Den letzen habe ich im Geschft meinmer Wahl vor Ort gekauft (um im zweiel zurckgeben zu knnen) dies ist der erste der tadellos funktioniert.

IšverstiShow in original languageHaben uns den WLAN Extender gekauft um in 2 Räumen im Dachgeschoss die Signalstärke zu verbessern. Bei manchen scheint es ja nicht so ganz geklappt zu haben, bei uns gibt es allerdings keine Probleme, die Einrichtung ging schnell und ohne Probleme per App.

Die Signalstärke ist top, selbst 10m weiter in anderen Räumen und durch 2 Wände immer noch 3 von 4 Signal-Balken am Smartphone. Durch die integrierte Steckdose im Gerät geht kein Steckplatz verloren, unsere Lampe kann an ihrem Ort Stehen Bleiben.

Für alle mit Signalproblemen sehr zu empfehlen.

IšverstiShow in original languageI upgraded from the Actiontec 3000N extender to WCB6200 and what a difference! Better download speeds on my internet and better Wi-Fi reception with 4 antennas. One important note – If your not using it with a propritery service like Verizon then definately do a firmware update found on the Actiontec support site.

I had issues that it would not communicate with my Gocoax adapter. Once I upgraded the firmware , it worked flawlessly BUT this firmware update can NOT be used with a Verizon branded Actiontec device.

You could brick the device.

IšverstiShow in original languagePros: Works very well in one go though but needed original Moca device for it to work. There are instructions on how to use it, very pleased. No more weak connections and unreliable connections.

Cons: A little steep in price but worth it.

IšverstiShow in original languageI cant believe more people dont have these. We have 3 levels and gigabyte service through fios. I have 2 paired with my fios router and we have 500mbps download speeds on wifi and every corner of our home and a strong signal outside which feeds our Kuna wifi floodlight camera.