20 Best Holsters For Taurus G2C (2023 Updated)

I like the holster just fine. It holds my pistol well. I do however like my holster to be a deeper tuck. I’m not sure if it’s just me or what but the holster I had before this is a cheap leather iwb.

Well maybe not so cheaply made but in cost it was actually cheaper than this holster I purchased here. It however is oddly enough a quality leather holster. I bought it originally for my SD 9VE but prefer to carry the smaller shield I carry now and it fits well like the bigger pistol.

I’ll have to do a few photos and vids to show what I mean but overall I like this new holster. However i feel that I’m wearing this holster when I can almost not notice I’m carrying my leather one. I do like this one very much but it feels oddly high to me is all.

I’m sure it’s just because it’s different for me is all.

This was my first experience with a plastic holster and I’m 77. I bought one of these for a Taurus G3C. The first time I put the pistol into the holster if fit so tightly I could barely pull it out. There is an adjustment buy the muzzle and after adding a few washers I finally got it loose enough easily remove the pistol.

However, after a few days carrying I noticed that the hard surface of the holster was beginning to mar the finish of the pistol. I eventually got a leather holster from another manufacturer. I do not recommend these type holsters and would never buy another one.

This is my 6th Amberide IWB holster. By far the best kydex and the best price. I love the full coverage and slim design, it’s head and shoulders above the “We The People” holsters. I’ve gotten several of my friends the switch to Amberide from WTP and they agree.

Keep doing what you do, and expand your models, I’ll be grabbing an FN509C kydex as soon as you drop it. Thanks guys. I added photos of my Shield plus Amberide vs my WTP to show the comparison of coverage and the slim line shape.

The last photo is my 19X in tan.

Received my order in a timely manner (Super important these days). This is the only kydex holster that I can wear comfortably at the 4 o’clock position. The clip goes on and off super easy and holds the holster tight to the belt.

Only IWB holster I will buy! This is my 3rd one that I just bought for someone else. They say the same things about it. Great quality. Form fits the pistol perfectly. Low profile. Great retention. Perfection as usual from Tulster! Kudos!!.

The fit to my pistol cannot get any better. Clicks in perfectly. Concealment is 9 out of 10 until you add the sidekick to it. Then it’s a 10/10. Hides amazingly in just a t-shirt at the appendix. Truly minimalist indeed.

Good ride height that allows a full grip on the draw. Not once have I engaged the magazine release accidentally. I only wish Tulster made shoulder rigs!.

Bought this holster for my husband on Fathers Day. He was excited to receive this gift and my husband isnt into “stuff”. He says the holster fits correctly and easy to remove the weapon! Recommend the buy.

I really like the design of the holster itself but not so much the belt retaining clip. It will probably work fine with a wide and thick belt but does not catch on a thin dress belt causing the holster to come out along with the gun when drawn.

This makes the holster unusable on thin narrow belts. Redesigning the retention clip to go between the pants and belt similar to the Galco Tuk-n-Go would surely correct this issue and make the holster useable with a wide variety of belts.

I implemented a workaround by reversing the belt retaining clip so the retaining lip faces outward and sliding the clip between the pants and belt so the belt pressure would keep the lip from jumping over the belt when drawing the weapon.

Not the best solution with the current clip design since this puts additional stress on the clip mounting point at the holster. It does work and allows the weapon to be successfully drawn without bring the holster along with it.

I would expect a slight redesign of the retaining clip so it could be used either way is possible and would greatly enhance holster use with a variety of belt types. Hopefully this was helpful and makes sense to your holster designer/makers.

See attached picture for the workaround.

I really love blade tech products, however this one I unfortunately didn’t. I felt that the holster sat too high up on the belt as to lean outward making the 365 a lot more noticeable under the shirt.

I wish it had some sort of retention claw that pushed it into the body a little more. I am on the heavier side, so that may be that this is for fit people only. I also understand it being higher to allow for a better, easier grip if having to pull out; however with how much more noticeable it was I’d much rather go back to my Glock19 as it sat more comfortably & imprinted less.

Don’t let this discourage you from their products, the return was SUPER easy & I absolutely LOVE all of their other holsters & mag carriers so far that I’ve purchased. Perhaps their cheaper 365 holster would be better at that price point, but this one is definitely not for how expensive it is.

Why hasn’t someone designed this holster long before now? I work black ops and many times I really struggle to conceal carry my Sig Sauer P365 XP. Sincerely I forget I am armed hot unless I just happen to readjust my pants.

The Nano holster do not have a point edge on the holster any where. Easily worn for this 12-18 hour shifts. I love it. I own 15-18 IWB of mixed manufactured, no others come close. I have honestly sold more than a dozen Ninos and 7 Blade Tec 2.

0 Eclipse that I know first hand. These holster perform. and out perform everyone’s. Thank you Blade Tec.

These are great holsters. I had received a G2c holster and just got a Taurus G3c so need to replace. The holster i had received two mos ago fits only G2c and earlier models. Well, called Amberide, they immediately sent me free return label and put in order to replace it with newest model and gave me tracking no.

for it. No other companies that sell holsters that I know of would do that. Amberide went the extra mile. THANK YOU. youve got a customer here for life.

This is an excellent holster that retains the G2c very well. I give it 5 stars because the only two very minor points don’t take away enough to warrant 4 stars, especially for the price. If I had to be very critical, I would say the holster could use an extra half inch of material at the very top where the rear sight is, to fully keep the gun from touching the skin.

Also, the hook on the belt clip could be just slightly sharper to make certain that very thin tactical nylon belts stay fully in the hook until it is raised to allow release. It won’t come loose with the entire holster inside the waistband, and it would certainly hook a thicker leather belt without fail, but it could be a touch sharper.

The holster has just the right tension for the gun, and stays fully open to allow re-holstering easily. I’m pleased, and the price is very good.

I recently purchased my first firearm after constitutional carry became law in my state, so this was also my first holster. It fits my gun perfectly, securely sits in my waistband, and is comfortable to wear.

For the price, this was an amazing buy. The gun is easily removed, but not easy enough to come loose when you don’t want it to. I would Amberide to anyone wanting to carry with confidence. Thank you so much!.

Very well made. Strong clip and yes it is shirt tuckable. Retention is adjustable but with the positive click you know you are locked in. I would recommend this company. Product came on time and as expected.

I got the carbon fiber look and it is awesome 👍. I really want them to do a 2 clip front appendix carry holster with a mag holder.

Thank you for providing these great holsters. They are very comfortable. I love the low profile concealment they offer, very light weight and how the holster does not scratch the gun is a huge plus. The retention on the holster is amazing.

I can wear this holster any day, for any event, with any clothes, in any weather. The corners/edges on the holster are very smooth. It does not poke or dig into you while wearing the holster. The clip and screws on the holster are very strong.

Also, I love that you offer different colors. All around the holster is very well put together. The price is unbeatable. I will pick Concealment Express holsters over any other holsters on the market! Great job! I will recommend EVERY SINGLE PERSON I know to Concealment Express! Thank you again!.

A coworker and I ordered tauras g2c’s online from a local dealer. I wanted a new holster for mine, and happened across a guy on YouTube raving about concealment express. The order process was as easy as I’ve ever used.

I got my holster in 3 days (it took my gun 5, and it was local). In my excitement, I ordered the tuckable model but wanted the standard. I contacted customer service, and they were SO nice! Offered to exchange for the holster that I really wanted with NO fuss or argument! Before I could send it back, my coworker bought the miss ordered holster because he was so impressed! I will be ordering the correct product this week! Tremendous customer service and ultra quick delivery! I will order holsters for all my handguns here!.

I’ve ordered this holster with the impression that I could use it as a IWB like in the pictures, but I found out that I cannot. I’d have to buy accessories to convert it into a IWB. That information is not on the website and the pictures are misleading.

The holster is good, apparently.

I bought this and was skeptical thinking it would be uncomfortable. But I was wrong, as soon as opened this package I tried it on and completely was shocked at how comfortable and concealable it was.

Especially since the 5″ ain’t no small gun. Can’t beat the price either! I will be buying more in the future.

Very affordable holster option, and fits the gun very well. Adjustable retention is a good feature, and a comfortable carry choice.

I have a Ruger LC9s and I really wanted a Paddle holster that had a quick release on it. I had spent much time on the internet looking at different types and brands. After much consideration, I came across this Scorpion model and was a little hesitant because of the low price but this fit perfectly ! Light weight but made well.

I now use this as my concealed carry and I would not trade it for the world. This is simply the best buy you can make if a paddle holster is in your future.

The good news is that this is a reasonable quality holster that can be used for several different models and manufacturers of semi-autos. The bad news is that the P226 and P225 that I have tried fit a little more loosely than what I would like, but that is the trade you make when you go with a holster that will work with several different models and makes.

It is exactly as I thought it would be so I was not surprised. If you want a better fit, you need to go with a factory holster or a higher quality one made specifically for your model.

The Holster and The Mag Carrier are both nice solid construction. My G19X fits great and smooth in and out. The price for the quality is in my favor. I shopped everywhere locally and could not find what I needed or wanted.

Scorpion Tactical had exactly what I wanted and have been looking for at a great price. The delivery was fast and overall no regrets.

I’ve finally found a Kydex holster that actually fits the Glock 42: the Vedder ProDraw Paddle holster. My handgun fit perfectly in the holster right out of the Vedder cloth bag (in which it ships). A half turn on the retention screw was all that I needed to get the desired ‘snap’ and fit when drawing and holstering my Glock.

The craftsmanship and quality of the ProDraw was immediately evident: smooth edges around the entire holster, snug fit without any gaps, excellent sight channel for easy holstering (for any variety of sights), excellent size for concealed carry, innovative paddle that fits over a belt or the pants, and high quality material construction.

In short, the Vedder ProDraw holster is the perfect Kydex holster for those having difficulty finding a holster claiming to fit a Glock 42. Incidentally, I recently purchased two paddle Kydex holsters from two other well known vendors for my Glock 42.

Both of the paddle holsters left gaps around the handgun and required some adjustment for a somewhat reasonable fit, although far from satisfactory. My impression was that these holster were made for the Glock 43, but advertised for the Glock 42.

Neither of the other holsters came close to the craftsmanship of quality of the Vedder ProDraw. I considered a leather holster, but most leather holsters have belt loops for 1-3/4 inch belts: Three problems – 1) most belts today are 1-3/8s inches, unless a belt is special ordered and a ‘gun’ belt; 2) most leather holsters move when a handgun is drawn, unless sinched very tight around the waist; and, 3) most pants for men only accommodate ‘up to’ a 1.

5 inch belt. The paddle on the ProDraw has a rubberized surface that adheres to pants, whether used in belt or pants mode. This unique paddle produces a snug fit that keeps the holster in place for drawing or holstering.

I highly recommend the ProDraw for anyone looking for a holster for the Glock 42, as well as other models of handguns. Now I know why the motto at Vedder is “America’s most comfortable holsters”.

I purchased the LightDraw out of a need for a concealable OWB holster for my G43x. It arrived in a timely fashion. And the packaging was impressive. My only issues with this holster was that the night stalker pattern did not come out quite as I had expected it as displayed.

The colors in this pattern did not stand out as much as I had an anticipated. It looks good, but maybe not worth the extra $20. If I bought it again I probably would have gone with the MAS Grey. The holster was a little wider than expected which kept it from forming to my body at the 3 o’clock position.

Granted it does have to make room for the streamlight TLR-7 sub. My final issue with this holster is how high the pistol sits in relation to the belt line. This effects the draw and it’s ability to be concealed.

If there was something that could be done to lower the pistol just a little bit I think it would make a huge difference. All in all it is a perfectly serviceable holster and I do plan on wearing it semi-regularly when not carrying IWB.

The holster that I received is very well made. My pistol fits perfectly. Once adjusted to my preference, the resistance to removal is sufficient to hold my pistol in place while walking and running, and light enough not to impede my draw.

There are two features that I had to alter in order to use this holster for EDC duty. 1. There was a portion of the inside panel that was too tall. It interfered with my draw. I used a Dremel tool to cut the offending portion away and now I can draw unimpeded.

2. the belt loops are positioned too far down on the holster so that they are well below the center of gravity. The effect is that the pistol grip tilted away from my side excessively. I fabricated new loops and the problem is corrected.

I have two more holsters on order with new loops and a Dremel at the ready.

You can move the thumb break to either side, I like mine on the inside so I break it open with my thumb on the way in for a tight grip on my weapon. You can also move the belt hook/clamp (whatever that’s called) to either side making it inside OR outside the pants holster.

It’s made extremely well, especially for the price. Has enough room to accommodate a laser or light, I had a mini combo Firefield that was a little large for it, I’m gonna try to make it work because of two things, 1 I really like the holster, 2 I think it’s tough enough to take a little stretching/reforming to accommodate my Firefield laser light combo, and if I tear this one up, I’ll get another one, I like the holster that much.

The holster is comfortable and the Taurus G2C fits very well. It’s easy to draw and the snap lock is nice. The clip doesn’t feel secure fastened to your belt but there is a solid belt loop underneath that saves the day! If you wear it inside your pants it might feel better but I prefer a belt carry.

Although it may not be all that durable, I gave it 5 stars because it’s just a great holster for the money, especially with the magazine pouch!.

fits snugly and provides good protection for the gun, ok. i like the extra mag pouch. but the overall package beomes to bulky on the belt and awkward attaching to belt. needs to be cut slightly lower on both sides so grasping and pulling from holster becomes somewhat easier.

Is there a longer belt clip I can purchase? The clips on my both my holsters are too short, when I pull my weapon the whole holster comes out of my waistband. Other than that they’re a really nice holsters, I love that you can adjust the angle of your weapon for easier draw.

Please help with the clip issue.

I purchased this kydex retention holster after finding an IWB a bit uncomfortable for regular use. Its as good or better than similar holsters that are priced at 2 to 3 times the price. I was hesitant about the reliability of the retention release.

But its flawless with a little habitual retraining of your grip acquisition.

Well constructed holster. Retention is adequate. Paddle works fine with or without a belt.

I bought Vedder Springfield Armory EMP 3″ 9mm OWB LightDrawTM Holster after extensive research online, and I must say I was not disappointed with the purchase. Over the years I have bought and used holsters from different brands (both IWB, OWB, Kydex, Leather, etc.

). This is by far the best holster I purchased. I got the one with the carbon fiber finish on the outside and standard black on the inside, along with the pancake clips. What a pleasure! FINISH: A very well-finished product.

The edges are well-rounded (no sharp edges). The holster looks super elegant and feels extremely rugged. WEAR FIT: The holster sits snug on the hip. Best concealability achieved for an OWB holster. The pancake clips make this happen.

These clips also add to the inner curvature of the holster and allow a fair bit of sideways movement on the belt to change the position of the gun on the belt (appendix to four-o-clock). FIREARM FIT: The SA EMP 3″ 9mm fits in the holster like a glove.

There is a distinct perceptible click when the pistol is placed, reassuring that the gun will stay in and not slip out (even with rough body movements, rolling around). The retention screw is a significant addition, allowing adjustment of retention tightness.

CUSTOMER SERVICE: Fantastic and highly professional customer service! Prompt and satisfying response to any questions I asked. The ordering was quick and easy. The product was shipped efficiently (and received on time) and I was able to track the shipment.

FINAL THOUGHTS: Highly recommend this product (and brand) to anyone looking for custom-fit, great quality holsters. I am a fan and a customer for life! I hope they make the POCKET LOCKER version for my SA EMP 3″ 9mm available soon.

This is an excellent Mag Holster. I have purchased two now. Perfect retention, excellent construction, and very comfortable to carry. I purchased two, one right hand draw, and a left handed draw about a month later.

The second purchase was to overcome the only down side I see in the design, and is my opinion only. The orientation with rounds facing forward in the holster requires a 180 degree rotation of the Magazine after draw before loading into the firearm.

An orientation of the rounds being stowed in a rear facing direction would allow a more direct, smooth draw stroke motion up into the firearm for faster reloading. The only reason for rating 4 vs 5 star rating.

4. 5 in my book. If you are willing to overlook that, it is an excellent product. Shipping was very fast on both items. I will definitely try out more of their products in the near future.

I can tell anyone who has made it to this review, just finding a company that makes a holster for a Smtih & Wesson M&P 2. 0 in 10mm is a real challenge. there are a few out there, but not many. Some make no distinction between the two sizes available.

My first order from another company did not fit al all, despite being handmade; supposedly for a M&P 2. 0 10mm. Long story short, Vedder came through with flying colors. a quality product with a variety of color and pattern choices, that fits perfectly, and absolutely no problem with the high sights catching on the holster.

And yes, the order came quickly with not problems. And yes, it can be cut for a red dot optic. Pick your color or cosmetic, and buy it. you won’t regret it!.

I had been looking at these holsters for awhile. I’ve tried several different ones but was never really happy with any of them. Finally decided to just go ahead and get this holster with the claw attachment.

This is absolutely the best holster I’ve used, so far. The fit and finish is superb. There are no sharp edges and it has a full length sweat guard. The holster is thin and compact but not cheap. The retention is fantastic.

Couple that with the adjustable ride height and adjustable can’t, you’ve got a rig that can be personalized your own way. Now. About the claw attachment. It does exactly what it says it does. It pulls the grip in tight against your body thus making your firearm virtually invisible.

I live in Florida and with the heat and humidity, I usually wear just shorts and a T-shirt. With the claw attachment, my firearm practically disappears. I would highly recommend anyone adding this to their purchase.

Since I got this holster a couple of weeks ago, I have been wearing it daily. It is, by far, the most comfortable holster I’ve used. Let me just say this. If you’ve been thinking about getting a Concealment Express holster, just get it and give it a try.

Don’t forget the claw attachment, you can’t beat it.

Hi Ben. I received my 2 holsters in the mail yesterday. The IWB holster is perfect. Just what I was looking for. I haven’t mounted my Sheld Sights, mini reflex sight on my HellCat yet but it looks like it will fit inside of the holster nicely.

I made a mistake on the OWB holster. I don’t think the one I ordered will holster my HellCat with the Shield Sight Mini reflex sight mounted to it. Will it be a problem to swap it for one that will holster my HellCat with the mini reflex sight mounted? I don’t know exactly which model that would be but I’ll take a look at the choices and see if I can pick the correct and run it by you.

Is that Okay? The H&K fits nicely in the holster I got for it. Smooth draw and secures the weapon nicely.

This is my third holster from Concealment Express and this leather hybrid holster is a game changer. I’m digging this holster and the craftsmanship and quality the company invested in this holster is amazing.

The leather is very stiff and durable and the comfort level is fantastic. I own a couple of Alien Gear Cloak 3. 5 holsters as well, but this new Concealment Express holster is way nicer. Thank you for making another awesome product.

I can’t wait until it molds to my body. It fits my Glock 17 like a glove. No issues with optic clearance or anything.

I have a very popular elastic/velcro band holster for a person who is Brave in Response to a threat. But this is my first IWB Kydex holster because I’m just getting used to carrying. I have a Sar 9mm because it’s an accurate and beautiful piece of defense; the problem has been that almost no one offers a holster for it besides Sar themselves.

Super thankful to have found this on Rounded! Rating 4/5. I’m 5’7, 145. Since I am new, I honestly can’t say what I will like or prefer, so since I’m in the testing phase I chose a setup that is ambidextrous: clip mount holes on both sides, the design without the sweat guard so I can use it appendix, at 4, or reversed at 5 o’clock so the handle is canted to my right, all for RHDraw.

Still testing what works best and this is a good start. Also got the Ulticlip3+, which was a waste because it doesn’t completely fit over a 1. 5-inch IWB EDC ratchet belt (Nexbelt or Kore). Should have gotten the next step up (Ulticlip XL) for a couple dollars more, but I was also concerned about the XL’s sharp edges and larger shape.

IMO, all metal pieces and corners should be rounded to avoid harm to clothes or skin. The claw add-on seemed like a great idea to minimize printing and maximize retention, so I did that as well.

I BOUGHT THIS FOR MY FN FNP 45, AND YES, IT FITS PERFECTLY, THOUGH THE PRODUCT DESCRIPTION SAYS FNX MODEL. IT IS BASICALLY THE SAME WEAPON. I NORMALLY CARRY THE FOBUS PADDLE HOLSTER, FILLED WITH A GLOCK 17.

FOBUS DOES NOT MAKE A PADDLE FOR THE FN 45, SO I THOUGHT I WOULD TRY ROUNDED. GLAD I DID. I LIKE THE “OTHER BRAND”, AND HAVE CARRIED THEM FOR DECADES, BECAUSE THEY ARE SO FAST. WELL, GUESS WHAT. THE ROUNDED IS JUST AS FAST.

THE DIFFERENCE MAKER ON A SHOT TIMER WILL BE HOW TIGHTLY YOU HAVE THE RETENTION SCREWS SET ON EACH. I SPENT 17 YEARS ON A SHOT TIMER, AND CAN CONSISTENTLY DRAW AND FIRE IN LESS THAN HALF A SECOND. THE DIFFERENCE IN THE RETENTION BETWEEN THE “OTHER BRAND” AND THE ROUNDED PADDLE IS 2 SCREWS FOR THE ROUNDED, AND ONE FOR THE ISRAELI, GIVING THE NOD TO THE ROUNDED RIG, AND COSTING IT ONLY A SMALL FRACTION OF AN OUNCE (THAT YOU WILL NOT NOTICE) IN BEING THE HEAVIER RIG.

THEY ARE BOTH JUST OVER 3. 5 OUNCES. THE DRAW IS SECURE WITH THE ROUNDED RIG, CONSISTENTLY, WHEN WORN ON PANTS WITH A BELT. THIS MEANS YOU WON’T GO TO DRAW YOUR PISTOL, AND HAVE THE ENTIRE HOLSTER COME OUT WITH IT.

AS FOR THE CONNECTION OF THE HOLSTER TO THE PADDLE, FOBUS USES 3 RIVETS (WHICH HAVE NEVER FAILED ME IN DECADES OF USE), AND THE ROUNDED USES PRETTY HEAVY DUTY LOOKING SCREWS, WITH THREADED RETAINERS ON THE PADDLE.

QUALITY. QUALITY. QUALITY. YES, I HIGHLY RECOMMEND. NOT TO PUSH ANOTHER COMPANY’S PRODUCT HERE, BUT THE ROUNDED DOES WORK FLAWLESSLY WITH THE FOBUS EXND THIGH RIG, IN CASE YOU HAVE A NEED FOR SUCH A SETUP.

BE SAFE OUT THERE.

I had been looking for an IWB holster for my gen 1 Baby Eagle/Jericho compact for awhile. Stumbled apon this and figured I would give it a shot given the price. I was pleasantly surprised on how nice it was when it arrived.

My pistol did have a little play in the holster, but was to be expected as it wasn’t built for it. I was also glad the holster didn’t interfere with the slide mounted decocker. The adjustment of the retention is great as is the cant.

I took a heat gun to the top/slide edge of the holster and gave it just a little pinch, the gun now fits tight in the holster. The holster is about a half inch longer than the end of the muzzle, have not decided to trim it yet.

So, this is a long review for a holster that wasn’t built for my gun. I can only imagine how well it would fit one it was actually built for. But, if you are looking for an inside-the-wasteband holster for an old steel framed/no rail Jericho or baby eagle I would recommend giving this a shot.

This holster does not fit my 5-1/2″ RedHawk. The barrel protrudes a full 1/4″ bellow the bottom of the holster. Also, the retention strap is to wide to fit properly between the hammer spur and grip. Add to the that if you were to remove material to obtain the proper fit, the strap would then be to long and you would have to cut and re-attach the snap.

I understand tweaking a holster but I’m not convinced this was made to fit the Ruger. I get better fit from a generic Uncle Mike’s out of the package for a third of the price. Really disapointed in this Galco holster.

Cant recommend it.

Love the holster. Not an exact fit for my new Colt King Cobra 357, 3″barrel but good enough. Could not find any other “leather” holster on your website that I liked or would work.

I had a hard time finding this holster in stock anywhere. But Mad City had it, made the transaction a piece of cake, & got to me fast! Fits my 4” Ruger GP100 great and should last a lifetime!

I used this holster extensively for a couple of years. Easy to hide gun with this setup; however, this holster holds firearm wayyyyy too loosely. Any singnificant jolt or bump will knock your gun out of the holster.

I have a somewhat active lifestyle and have regularly had to worry about my gun falling out just climbing and jumping around. Screws also come loose on this regularly (even after having applied threadlocker).

Screws seem to be about 30 thousandth off. Up until recently I could not find a holster slim enough but with good retention. I cannot recommend this holster if you are regularly on the move or even moderately active.

Get something better, a few dollars more will get you a safariland 575 ifb holster or something that is actually quality.

Bought for my P365XL. Not the biggest fan, it was okay for what it was and price, but reholstering was near impossible due to the open design of the trigger guard. That meant practicing a draw stroke required you to draw, then remove the holster and snap it back over the trigger guard.

If you’re looking for something cheap with a claw that can secure a smaller pistol it’s not a bad choice, but has its limitations. If the kydex was stiffer and held it’s form better reholstering wouldn’t be an issue.

Excellent holster, fit my P365 very well, fit comfortably with one exception that I took care of. The upper inside part that is next to the top of the slide was flared out a little and chafed my skin when worn.

I used a heat gun and folded the little flared portion and blended it to match the contour of the holster, no more chafing. The holster rides well, retention is good and the kydex makes re holstering a breeze.

I’m planning to used the enclosed coupon to purchase an oak colored defender holster. Thanks.

I bought it for a Glock Model 45, 9 mm and it didn’t fit. The Model 45 is basically a model 19 slide on a model 17 frame. I tightened the adjustment screw all the way but the firearm would fall out. I returned it and Relentless Tactical quickly refunded my money.

They are a great company. I only wish the holster would fit my Glock Model 45, 9 mm.

I have a S&W MP Shield, 9mm, EZ Performance Center. I don’t know if that makes a difference, but I can’t get my weapon out of the holster. I’ve loosened the Rentention Adjustment and used gun oil inside.

It snaps in place, but I can’t get it out again. My husband has trouble with it also. It takes him about 10 minutes, when he got it out,and put it back in, there was another struggle. There is no way I can get my weapon out no matter how long I struggle.

It feels to tight. Do you think a leather or suede would fit better? I have a belly band, want a inside waistband holster also. Please help.

Quality of the holsters is exeptional! Hold the pistols securely and holsters with guns in them are stable wearing. With the correct shirt concealment is good grip does tilt out from body somewhat. Highly recommend them and shipping was super fast though post office sent them 500 miles beyond us for 4 days.

Not Rounded”s fault.

Great price, quality material, and fits G2C like a glove. Easy to get on and off, yet has a firm grip on your side. Best carry holster I have had. Have one for my Bursa Thunder and my Taurus 780. Rotate between the 3 depending on dress attire and plan.

Recommend to anyone interested in quality holster.

This holster looks great. Very slick and I’m glad you make a left handed version for the PT111. Will be ordering an IWB and mag holder as well. Thank you Concealment Express!

Excellent for different carry configurations. Sturdy and comfortable for everyday carry. I carried a sidearm for a majority of my 30+ military career as both a primary and a secondary weapon, and have tried and experienced many different holsters, both for combat and garrison.

Alien holsters are for the discerning. Well put together in every way. If you need to duty-carry the L2 thumb-lock is nicely designed. With the way things are going in this country, I would not dismiss this as a possible configuration when out and about while conceal carrying.

The bad guy is getting bolder and the innocent man is a new target! They are eyeing you up to see if you are carrying, and will try to take it from you. Currently, I prefer OTW high carry with L1. Many of my buds prefer appendix carry and are happy with the Alien configuration for it.

This holster’s configuration for both are – surprisingly – extremely comfortable (but don’t forget there is no perfectly comfortable while carrying), I was so pleased with it, I bought another complete kit for a larger pistol.

My overall rating for this piece of equipment is as follows: Well done, Alien!.

I have owned Alien Gear holsters for a number of years. Not only are these holsters constructed using the highest-quality materials, the customer-service is always superb. This 4. 0 Sig P365 holster disappears when being worn and is super comfortable all day long.

I HIGHLY recommend these IWB 4. 0 holsters.

Supremely comfortable holster with adjustable retention and unlike other holsters that attach to your belt in only one (1) location, the cant of your pistol doesn’t change and create awkward moments when it is at an odd angle and holding your shirt / overgarment up.

I had a single-point attachment holster for a few years and it was OK, but I was always reminded of when I was carrying and had to keep readjusting both the cant and the location on my belt as I sat down / got in and out of vehicles etc.

I wore this all day in blistering 98 deg F North Carolina heat and was completely comfortable. Highly recommended.

Well designed, with correct tension on magazines and a comfortable fit that remains close to the body to aid in concealment. Kydex patterns available to match or complement the same pattern on your holster.

Well-executed with no rough edges or burrs. Very professional. Could not be more pleased!.

Great MagDraw and fantastic customer service. I ordered a MagDraw Double OWB holster for my Glock 17 and the fit of the holster is great. You can adjust the draw resistance to your personal taste and the workmanship leaves nothing to be desired.

A fantastic holster at a great price. The MagDraw was racy fast with me in Germany. The customer service is excellent. Every request is answered racy fast and friendly. Many thanks.

I am not a big fan of the design of the magazine carrier. After adjusting the tension on the mag holster 4 or 5 times I still could not get it to hold my magazines properly. I would have to say overall construction of the product was good, no complaints there.

My issue was that I did not care for the design.