20 Best Holographic Sight Under $300 (2023 Updated)

Came very late. Was very flimsy. Thought it was solid wood but is like thin ply wood.

I realize for the money it was not going to be great, but I just needed a pocket glass for hunting, that if it got busted up–no big loss. However, the focal adjustment is useless. Can’t get it sharp and over 150 yards its fuzzy.

Like I said for the money I took a chance and its not what I need.

I received this sight as a gift. Good choice. I found it easy to sight in. First on a shotgun for spring turkey, then a crossbow for fall archery (deer). I tested it throughout the seasons and it remained true.

Verified the range finder in the scope with a standalone rangefinder and found it to be very accurate. Video recording worked without any issues. Ultimately I judge equipment like this based on performance.

I ranged and recording multiple turkeys and deer but I pulled the trigger just three times. Kill shots each time. Is there a learning curve? Yes. My best analogy for this sight: it’s like transitioning from a regular film camera to a digital camera.

If you understand the basics of any scope, range finder and video recorder, you will adjust to the Omega quickly. I also had a question about the sight and customer service responded quickly.

I received this sight as a gift. Good choice. I found it easy to sight in. First on a shotgun for spring turkey, then a crossbow for fall archery (deer). I tested it throughout the seasons and it remained true.

Verified the range finder in the scope with a standalone rangefinder and found it to be very accurate. Video recording worked without any issues. Ultimately I judge equipment like this based on performance.

I ranged and recorded multiple turkeys and deer but I pulled the trigger just three times. Kill shots each time. Is there a learning curve? Yes. My best analogy for this sight: it’s like transitioning from a regular film camera to a digital camera.

If you understand the basics of any scope, range finder and video recorder, you will adjust to the Omega quickly. I also had a question about the sight and customer service responded quickly.

I used the Omega II on my crossbow in 2021 and absolutely loved it so much, that I moved it to my 410 shotgun this year for spring turkey. I purchased the Omega III for my crossbow in 2023. It is a great sight and does exactly what I need it to do.

As a hunter with a significant disability (quadriplegic) I am able to operate the sight independently by using the two button remote. Now I can sight, range and video independently with no worries about eye relief.

Nice to have the 5 pin head for quicker shots on target for ranges up to 60 yards. For any longer shooting, the slider allows for accurate adjustment. You can also adjust the slider for ranges from 20-60 and not use the other pins, if you have the time to adjust.

It really helps when shooting gaps in yardages. The sight itself is built better than the USS Fitzgerald, thankfully and offers near infinite adjustments.

Easy to install easy to sight in. I did not use the calibration tape I instead sighted 20,30,40,50 yards scribed a small line for each then matched the best tape to the scribe marks. Sight is spott on for each yardage.

My bow is an older High Country brand that chrono’s at 278fps with a 300grain arrow/100gr point total weight of 400gr.

This sight is so simplistic yet so rugged it is by far the best bow sight I’ve used to date. Simple 2 hole mounting takes the guess work out of it and the 2nd and 3rs axis adjustments let you get lethal accuracy out of this sight.

Simple, accurate, tough as nails!.

I bought this sight for my bow to try the single pin setup. This was the best move I could have made! Wish I would have done it sooner. This sight picture is now less crowded with only one pin. I followed the easy process, sighting in at 20yds and 60 yds and applying the yardage tape that was calculated and was shooting out to 90 yards within an hour.

This is a very accurate sight with a lot of built in features. This was the best purchase I could have ever made for my bow. I highly recommend this sight to anyone wanting to gain long range accuracy.

This sight is awesome. I’ve used it on two different bow at different draw weights and it’s on target everytime. It’s very easy to tune. I can also shoot at farther distances more accurately. the title above I’m never going back to multiple pin sights.

I was a little intimidated with the lengthy explanation of the sight in process but it was much easier than it sounded. If you can zero at 20 and 60 yards it’s a piece of cake. The scale is not 100% accurate at every yardage but it’s close enough.

At 45 yards I’m a little high so I use 43 for 45.

This is a great sight. I have never had an adjustable sight before. I zeroed my pins at 20,30, and 40 yards then set my sight tape. I went out to 60 yards and I hit bull on my target. Then I decided to dial it out to 90 yards and slung a few.

Now that was my first time shooting 90 yards but I still hit the bag, but my group wasn’t great (operator error). Overall quality is great, materials are solid, and the mechanics are smoot. I defiantly seems to be durable, only time will tell though.

I also like the dual indicators on this sight. I couldn’t find anyone else that had two indicators that were fully adjustable like this sight. It lets you know exactly where you are hitting on the top and bottom pin, and ball park where your middle pin is hitting.

Lastly the thing that I was most happy with about my order was the personal hand written card that I received with it. Its really nice to see that the company took the time to write a personal card to me thanking me for my order and wishing me luck with my new sight.

I will defiantly be ordering from goHunt again for this reason. Caring for your customer goes a long way.

Decent sight. The build is solid but it doesn’t come with Allen’s or any wrenches for the micro adjust. I had to go try out a bunch of different ones at a hardware store to even get one to fit. Kind of disappointing when you buy a 300 dollar bowsight that doesn’t even tel you what kind of Allen to buy separate.

Sight is made of rock solid construction. Mounted up and within minutes I was driving tacks. Easy micro adjustments for the pins. This sight is literally RIGHT ON TARGET. Would highly recommend for a budget friendly upgrade.

Replaced a Trophy Ridge Cypher 5 micro pin that came with a ready to hunt package and could not be happier about the purchase.

Windage, elevation, individual pin adjustments, 2nd and 3rd axis adjustments are all precise and easy to adjust. 19 pins are very bright even in low light and work well for long and short range. Mounted sight as close to the riser as possible and 1/4 inch peep is perfect fit for pin guard with 30 inch draw.

Shooting tiny little groups with this sight, glad I bought it.

I didn’t want to spend much money on a sight for a used youth bow. I was pleasantly surprised with the quality of this sight. The fiber optic sight points are clear and the protective ring around them highly visible to bring you quickly on target.

There were no installation instructions but easy to figure out. Installation a breeze with the included screws.

excellent condition

Left and right locking adjustment comes loose, only 4 mounting points on dovetail, pins fiberoptics dont get enough light exposure, level bubble is part of the sight ring(and not inside the sight ring, very bad placement) yardage indicator cannot be set all along the slider, not enough mounting points.

Individual pins “micro adjustment” is numb feeling and difficult to measure how much movement you are adding to pins position(lack of score marks). Had one other CBE sight before this one (TL7) and was a little better but also disappointing.

Left and right would walk and wife had to pain the sight ring fluorescent orange to make it consistent for locating in peep. The metal sight tapes are REALLY nice tho.

I have been using this sight for a few months. It is very smooth and easy to set-up. I like the bright green pin housing, making lining up with your peep sight easy. I love the metal yardage plates, they look awesome and you never need to worry about weather.

Issues: The biggest problem I found, like others who have reviewed this sight, is the housing is loose. It rattles as you move. It did not effect my shooting accuracy but it made noise and felt unstable.

I contacted CBE twice and never got a response, which was very frustrating. I was able to fix the issue by cranking down of the windage dial. This fixed the rattling issue but I cannot use the micro windage adjustments anymore.

Love this sight!! I purchased the multi-pin sight after using the CBE single pin sight for target season. I found CBE’s sights to be incredibly well constructed. All the adjustments are easy and the distance indicator is made from metal as opposed to other sights which use sticker tape.

I’m definitely a CBE fan!!.

This sight is extremely durable and way more easy to tune then I imagined. The calibration sight tape couldn’t be any easier to utilize. A fantastic product at a damn good price.

A very well made sight, quite and Easy to move. The 3rd axis could be easer to set and the left to right sight movement also. But all in all a good sight. I have two of them.

The sight is nice for the money. It has good fiber optics and a light for low light situations. But, the rheostat to turn the light on and off is marginal at best. You turn it and the light turns on and off, but there is no end point.

It just keeps turning. There is a small Allen wrench screwed into the top of the sight, which comes in handy.

High quality Trophy Ridge 3-pin sight. Whether you’re new to archery or a weathered hunter; the 3-pin setup is IDEAL. Three fully adjustable light-up pins. Has a good amount of area to let light in for low light settings at dawn or dusk.

Combined with an Easton low light peep sight, animals don’t stand a chance at any time of day. Multiple spaces to set up for your quiver for the perfect balance when shooting.

Great site, have it cited from 20, 30 and floater out to 70, but it’s pretty bottomed out at 70. Would like to get smaller pins if that’s possible, can you order those anywhere? I also really like having adjustment tool attached, my only complaint is that one of the tension screws for the sights keeps coming loose, I put some bowstring wax on it and that seems to help some.

After using multiple pin fixed sights all my life, I decided to give a single pin slider a try. I didn’t want to spend too much in the event it didn’t work out, and after researching all options, I settled on this model due to the tool-less adjustment feature.

After watching several HHA sight-in videos, I went to the range and decided on the 20yd/40yd sight-in. Following their instructions to a T, I installed the recommended sight tape after using the 0-65 setup tape, and shot from 20, 30, and 40 yards.

I was dead on at each distance, and then for the first time ever, shot at 50 yards and put 2 of my 3 within 2″ of center. I’ll be hunting with it for the first time this weekend and the only reason I’ll have for a missed shot, is if I don’t remember to adjust the yardage dial.

Lastly, this is a high quality sight regarding the construction and hardware. Having a machining background, this is of the highest quality, I doubt I’ll ever have to replace any parts from normal use.

I would highly recommend this to anyone looking to upgrade their bow’s shooting capability.

I have been a bowhunter for about 8 years. I am not a competitive shooter, and typically only target deer inside of 30 yards. To set this bow up, you have to put a ticker with a scale on the sight, then zero in at 20 yards and 60 yards.

You take the corresponding numbers from the sticker, and with some quick math, you come up with a number that tells you which sticker to permanently put on your sight. The problem for me is that I realized very quickly that I would never get a tight group at 60, so I was just wasting my time.

Heck, I can barely even see the center target at 60 yards. Seemed to be a very well made sight, and a pretty cool concept, but I am simply not a good enough archer to get the thing set up right. Hats off to the other reviewers as they are very accomplished shooters.

For those concerned about the use of single pin sight let me put you at ease. I have used a single pin sight similar to this for the last 27 years. when I got it the bow I put it on shot a screaming 187 FPS! after that bow it was put on the next four I owned including the 11 year old bow that I shoot now (265 fps wow!).

sadly it finally gave up the ghost which required me to find a replacement that is simple to use, I found it with the HHA sight. With today’s bow speeds a single pin covers pretty much all you need. you don’t need or want micro adjustments on the tape-simpler is better.

practice and you will know how to use it. I have successfully hunted deer from tree stands to pronghorn and mule deer on the prairie with this type of site.

I love this sight. It is easy to set up and I have it matching my range finder exactly. I set it up with my top pin matching my slider strip. So i have 10 and 20 more yards on my other pins. I can go out to 96 yds on my slide and 116 with my pins.

I can also stack pins from that point so it’s the best of both worlds. I would highly recommend this sight to anyone especially for hunting situations when you set your slider and the animal starts to move away from you.

You can let it move up to 20 yards without having to reset your slide. Excellent sight. I love it.

This is not a quality built sight. Sight has a lot of flex at the elevation block even when in the locked down position. I have a TL3 sight made my CBE and it is by far a better product. Going to install this sight on a child’s bow where shots are not important.

Don’t hang this on a 1000 dollar bow like I did.

My stock peep didn’t last long. I visited the Arkansas Cabelas and the gentlemen in the archery department were great. They didn’t push any particular product but I decided on this peep. It has lasted great and is working up to the expectations I had for it.

Pretty nice peep sight. It helps to have it tied in. I chose it because the color helps me clearly align my pins. I’d recommend this over the sights with the tubing attached.

I can’t say enough great things about this sight. I wanted something affordable, high quality, and with a few whistles and I got all that and more with the micro tactic. I just got my bow a year ago and started off with the cheap sight that came with it and when it got to the point I could not adjust my pins without them sliding in the least bit I decided to do my research and all the reviews are 100% correct.

Installing was a breeze and for the price it looks expensive.

Great innovation by CBE. All quality construction you can expect,from a high end sight. Bright pins, easy adjustments, oversized bubble. Perfect for the bowhunter who wants the best they can afford. Priced well under what you would expect from a sight of this caliber.

This sight is aluminum construction and is micro adjustable. Extremely bright pins even inside a ground blind. Don’t let the cost fool you. This sight is high end performance.

The entire main components are made of aluminum. The fiber glow very bright. In dim lit condition like under the tropical rain forest canopy, it is still bright enough. There is no distance mark label which you can either mark your own when you calibrate you bow, or buy one separate.

The sight ring is not too big and looks fitting on my Spyder 30. There is no adjusting knob for fine adjustment though. To adjust, you have to carefully slide pointer after loosening the tightening knob (golden).

Problem with the know is that you do not unscrew it too much or the hex head would protrude too much and will touch your bow frame. You just have to open it quarter turn in my case.

This is my first single pin sight and I love the ease and convenience it brings. I would have rated it a 5 if the vertical mounting bracket would have had one more adjustment screw setting. For me I had to use only one screw vice two for securing the vertical sight bracket because I had to raise it up due to my height and peep sight placement.

That is probably just nit picky but for me it made a minor difference in my opinion. All other adjustments are great and more than satisfactory. Light weight and easy to see. The optics are great and the level easy to see.

For the money you can’t go wrong.

I wanted to try a one pin sight so I tried this one because it was a reasonable price compared to most others. I was very impressed with quality and of course how accurate it was. The only flaw with this rest is it doesn’t come with sight tapes.

HHA or Covert sight tapes will work for it. The fiber optics are the best I have ever seen and the optional light works like a charm with easy brightness adjustment. Over all I believe this sight will stay on my bow for seasons to come.

IšverstiShow in original languageThe React Trio Pro by Trophy Ridge is a great sight. I like the three pins for tree stand hunting in the Midwest but the flexibility that comes with being able to dial the sight out to 100 yards.

The sight is durable and works exactly as advertised – I was accurately sighted in with minimal time and effort. React Technology is like a ballistics chart for archery – but doesn’t require sight tapes for other changes with your set-up.

I definitely recommend this.

Wow! After spending about 45 minutes installing and dialing this sight in I had two arrows touching at 55 yards. The package included everything needed to mount the sight and my quiver on a PSE compound bow.

The instructions left a little to be desired and could have benefited from some illustrations labeling parts of the sight system. With that said, it only took about 45 minutes to mount and get it sighted in at 20 and 40 yards.

After selecting the correct tape I took shots at 20, 30, 50 and 55 yards. Between the accuracy of the tape and only focusing on one pin my shots hit the mark at each distance. The last two shots were touching at 55 yards.

I’m actually considering buying a magnified lens for this thing because my vision is the only thing holding me back from shooting longer distances. For the price I am extremely happy with my purchase.

Not cheap, as a matter of fact its about as expensive as it gets. I never thought Id ever spend this much on a bow sight but I am a firearm enthusiast and I appreciate high quality optics. I also wanted a buy once best I could afford sight for my Triax.

This one definitely doesnt disappoint , the price is where it ends if you try to find a complaint. Does exactly what its supposed to do. The elevation dial is as smooth as butter, I did opt to change the magnifier to the brass pin which was included, very nice HhA! Easy to zero, included distance decals, Is find it hard to imagine any FPS set up wouldnt be included.

A second dial included! Very nice as I have FMJ arrows which are a lot heavier than my other ones, swap the dial and boom Im zeroed for those as well. I opted to purchase the blue light which for this price couldnt be included? However you can mount it over the dial pin or for the sight dot.

Top or bottom. Offset to the side wouldve been my choice in position but it works great nonetheless. Overall its just a bada$$ sight if youre looking for a single pin. I have a TruGlo Range Rover on my DNA which is awesome as well but it is definitely not in the same league as this as far as the build quality and smoothness plus attention to detail.

It is awesome in its own right and price range however. But I cant say enough good things about the HHA , Construction and workmanship is second to none, features and attention to detail are genius. I could not be happier , if you are even considering it.

Do not hesitate anymore, just buy it. You wont be disappointed, if you even have a hint of thinking you spent too much in a sight, by the time you take it out of the package, youll have a big smile and will not question your purchase.

after you zero and use it, any residue of the high cost you paid that may be left over will be wiped out and may consider for a second even getting one for your other bow! Haha my Range Rover is awesome and I wont do that but if that one fails me, I wont hesitate to get another one of these.

This is my first single pin sight. I am right handed but blind in my right eye so I shoot a rifle and bow left handed, these are the ONLY things that I can do left handed and was concerned about having to try to make adjustments in the field.

My quiver sits pretty close to my bow and it’s a little tight to get to the elevation adjustment. May be a problem if I need to make a quick adjustment during a hunting situation but this may just be my lack of coordination with my left hand.

The sight was easy to install I couldn’t get a preprinted label to match my bow to my liking so I used one of the plain white labels that they supply and made my own marks. I really like the windage adjustment on this sight.

That was one of the main reasons I bought this sight. While adjusting my old sight I kept bouncing to the right and left of bull’s eye and could never get perfectly centered. The single click adjustment really helps with that.

I have already recommended this sight to a friend that shoots an older HHA sight that doesnt have the single click windage adjustment and I think he is going to get one.

I upgraded to this sight from reading online nothing but good things to say. I agree with every good review on this sight. It is light, it is strong, and the pins are very very bright. My only negative thing to say about this sight is the rubber coating.

It is not that tough, and it makes adjusting pins sort of hard. The pins bite into the rubber coating and makes it hard to move the pins, on the other hand that will keep anything from moving when you get it set up.

I highly recommend this sight to anyone not looking to break the bank to get a great sight.

Nice enough sight but the fiber opitcs don’t let in much ambient light, making dependent on a cheap batrery powered one. My battery light came defective and wound not stay on unless a third hand pressed it continuously.

I bought an adjustable aftermarket light and removed 2 of the 5pins to simplify target picture to three distances. No precision adjusting, just needs allen wrenches and kentucky windage and a few spare arrows.

You’ll lose a few while trying to sight it in. Truglo cut some corners to make this sight inexpensive. It looks good though.

bought this sight after being recommended by local dealer. is very light and nice bright pins. however making adjustments is difficult. windage and elevation adjustments are sticky, hard to slide with no reference marks.

the other issue is the nuts on the pins themselves. they were so tight upon purchase that i stripped them a little. they are poor quality material.