20 Best Hinges For Cabinet Doors (2023 Updated)

Each order is one piece. (NOT PAIRS), SINgLE PIEcE, 1 Pc only. This Hinge only worked on corner cabinet Folded Doors.

The Amerock BP2811J2314 Functional Hardware 1/2in(13mm) Overlay Hinge is finished in Nickel. Every hinge series is tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality.

2-way independent adjustability. Compact design with low protrusion into cabinet opening. Stay open feature. Nickel is a cool, smooth silver-toned finish that is timeless and subtle. Amerock markets decorative hardware solutions that inspire, coordinate and help express personal style.

For the kitchen, bathroom and the rest of the home, with a variety of finishes and designs for all decorating tastes, Amerock is the ultimate, time-tested source for hardware needs. Amerock markets products in four categories: decorative hardware, decorative hooks, bath accessories and functional hardware.

Material: Steel.

The Amerock BP7550G10 Functional Hardware 1/2in(13mm) Overlay Hinge is finished in Satin Nickel. Every hinge series is tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality.

Heavy-duty steel construction. Reliable, self-closing power of dual compression springs. The classic Satin Nickel finish provides a sleek, lightly brushed, warm grey metallic look. Amerock markets decorative hardware solutions that inspire, coordinate and help express personal style.

For the kitchen, bathroom and the rest of the home, with a variety of finishes and designs for all decorating tastes, Amerock is the ultimate, time-tested source for hardware needs. Amerock markets products in four categories: decorative hardware, decorative hooks, bath accessories and functional hardware.

Pair of 3 x 2 Solid Brass Cabinet Hinge with Ball Tip Finials Deltana Solid Brass hinges and finials come in an array of fine finishes and maintain a superior finish due to its ability to resist oxidation.

Deltana is the architectural hardware manufacturer with a proven record for exceptional service and quality. Deltana inventories the countrys largest selection of architectural, lighting, and door hardware in over nine fine finishes made from solid brass, zinc, aluminum, steel and stainless steel.

For more than 110-years SOSS invisible Hinges have been found in many applications where flush fit, compact size and smooth operation are necessary. SOSS Invisible Hinges are unparalleled in safety and security.

When closed, the SOSS invisible Hinge cannot be seen or tampered with. When open, the riveted hinge pin is non-removable.

Corner hinge 155°, BLUM CLIP top BLUMOTION, 71B7590, INSERTA, with spring, NI, wide angle.

CLIP Top Collection CLIP Top Full Overlay Screw-On Cabinet Door Mini Hinge with 94-Degree Opening Angle Blum’s Euro hinges come in different styles depending on overlay or inset, the desired opening angle and installation type.

CLIP top and CLIP hinges have three-point contact between the hinge and mounting plate to keep them firmly connected under heavy usage. This type of connection makes it easy to connect the door to the cabinet.

Features: 94 degree opening angle Side adjustment of +0. 5 to -3. 5 mm Hinge for small doors or doors with small frames Must use 26 mm drill bit (1 inch can not be used) Full overlay Screw-on installation Self-close function Blum, Inc.

is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems.

Laurey Laurey is today’s top brand of decorative and functional Cabinet Hardware! Make your home sparkle with Laurey’s Decorative Knobs and Pulls, or fix up your cabinets with Laurey’s functional hardware! Cabinets feel better when Laurey’s on them!.

CLIP Top Full Overlay INSERTA Cabinet Door Hinges with 110-Degree Opening Angle and Self Close Function CLIP top and CLIP hinges have three-point contact between the hinge and mounting plate to keep them firmly connected under heavy usage.

This type of connection makes it easy to connect the door to the cabinet. Since 1985, the CLIP hinge has been an industry leader in easy, tool-free attachment of door to cabinet. 110 degree opening angle.

For door thicknesses up to 26mm. Straight-arm hinges only. Cross-reference the door thickness and bore distance to assure that doors wont bind when opened. INSERTA installation. Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems.

Features: Includes a single hinge in each order Constructed of durable and corrosion resistant steel Self-closing function closes the cabinet door, preventing it from staying open when not in use Adjustable in all three dimensions Installs by press-fit for easy installation Works with cabinet door thicknesses up to 7/8 inch (22 mm) Product Technologies: Concealed Hinge: Modernize your kitchen cabinets with a concealed hinge to create a seamless design and a new smooth functionality and feel.

Overlay: An overlay hinge is needed when the cabinet door you are mounting overlays the cabinet frame itself. Overlay hinges install on the interior edge of the cabinet frame and the interior face of the door, providing full motion with complete concealment of the hardware itself when the cabinet door is closed.

Material – Steel: Steel is cheap strong and durable making it a favorite for hinges of all types. Though it is more prone to rusting than solid brass or stainless steel. Mounting Type – Press-In (Press Fit): Press fit hinges are equipped with pre-mounted dowels that fit into holes drilled directly into the cabinet door.

They do not require any screws, and generally make for quick installation and replacement. Specifications: Opening Angle: 107 Overlay: Full Height Adjustment: +/-3. 2 mm Depth Adjustment: +3/-1 mm Side Adjustment: +/-2 mm Hinge Construction: Two Piece Mount Type: Press Fit Material: Steel Self Closing: Yes Soft Close: No.

+45 DEGREE SOFT CLOSE KITCHEN CABINET HINGE + FRAMELESS PLATE Hinge is made from nickel plated steel. Hinge fits into a 35mm (1-3/8″) cup drilled in the back of the door. Cup depth is 13(1/2″). The center-to-center screw hole dimensions on the hinge cup are 35(1-3/4″).

Door Reveal – the reveal is the gthat is found (when the door is closed) between the edge of the door and the cabinet side panel that the door is hinged to. The reveal dimension is determined by the “bore distance”.

The bore distance is the distance from the edge of the cup drilled in the back of the door to the edge of the door. You can use any bore distance from 3to 8(1/8″ to 5/16″). The center-to-center screw hole dimensions on the hinge cup are 35(1-3/4″).

If your current hinge is 1-3/4″ or the less common 1-7/8″ you can install this hinge without re-drilling the screw holes. For 1-7/8″ screw hole dimensions, the screw will go in at a slight angle but usually works without a problem.

Make sure to order at least two hinges for each door that you are hanging. No exceptions! Lost package due to your address problem will not be re-sent or replaced.

PACKAGE CONTENT: 4 Pieces Soft Close Full Overlay Hinges and Installation Screws MAIN SPECIFICATIONS: Overlay: Full, Opening Angle: 110 Degree, Closing Type: Soft Closing, Adjustment: 3-Cam Vertical, Horizontal and Depth adjustment.

These are the main specifications of our hinges, please look at the descriptions section at the bottom for a comprehensive view of all specifications. FULL OVERLAY DESIGN: These hinges will have a straight arm and it allows your cupboard door edge to be completely in line with the edge of your cabinet.

One major advantage of a full overlay concealed hinge is that it is fully adjustable due to three little screws that they have. Depth, Side and Height adjustments are made with these three screws. They can be fine-tuned to ensure the door frame is totally concealed and fits together perfectly.

SOFT CLOSING: The soft closing function is one of the best indicators of the quality of the hinges. The soft closing feature prevents all disturbing noises from the kitchen and extends the lifetime of the doors, cabinets, and hinges.

CLIP-ON FUNCTION: The clip-on hinge is the easiest and quickest to fit, without any tools. It is ideal for doors requiring multiple hinges to be fitted this is because you simply line the hinge up with the mounting plate and push it on in one simple movement, it will then clip on to be connected to your mounting plate.

They require very little alignment and make the job much easier when you have a few hinges to fit.

The traditional face frame Inset Hinge without Spring is a perfect for cabinet door mounting. Made from sturdy steel material, the inset hinge without spring will ensure long product life. Included are easy to follow installation instructions.

Liberty The Liberty Hardware Inset 2. 8” Hinge helps you create functional pieces of furniture. This hinge is made from steel which serves to make it sturdy, robust, and durable. The satin nickel finish of this hinge lets it blend into the design of different types of furniture.

The design of this hinge makes it easy to open and close the cabinet door it is attached to. Fasteners are included with the Inset 2. 81” Hinge by Liberty Hardware, and this makes it easy to attach to the flat surface of a cabinet.

This hinge is easy to maintain, and can be lubricated with a standard lubricating agent.

New soft-close solution is integrated into the hinge, eliminating the need for a separate buffer on each door. This concealed soft-close solution provides gentle and quiet closing of cabinet doors each and every time.

The 6-way adjustment feature provides quick and easy fitting to each door frame. Six way adjustable hinge. >>Full overlay >>Nickel plated finish >>Integrated soft close mechanism >>Provides function while keeping the focus on the beauty of the cabinetry >>Adjusts to accommodate.

Pocket/flipper door hinges for inset doors (3/4 maximum thickness) on either frameless or face-frame cabinets. Can be used with slides in the EZ Pocket Door System for doors that weigh up to 30 lbs. and are a maximum of 42 tall x 24 wide or with slides in the KV8091 Pocket Door System for doors up to 75 lbs.

and 72 tall x 26 wide. Require 35mm hinge cup holes. Note: The EZ Pocket Door System requires one pair of hinges per door. The KV8091 Pocket Door System requires two pairs of hinges per door.

This full-cranked hinge is for inset panel or face frame cabinets and features press-in installation. The BLUMOTION function can easily be deactivated on one of the hinges, giving small or light doors the same high quality of motion.

Simply slide the switch on the hinge cup, then close the door once. This Creates a quicker, but still silent, close. BLUMOTION can be reactivated the same way. Silent and effortless, thats how cabinet doors close with CLIP top BLUMOTION hinges regardless of the weight or closing speed.

The new BLUMOTION soft close mechanism is integrated in the hinge cup, and continues to provide the quality of motion you have come to expect from Blum hardware. Features: BLUMOTION integrated into the hinge cup Deactivation switch for small/light doors New geometry for door thicknesses up to 26 (1 inch) Boring distance range 3 mm to 7 mm For cabinets with inset doors Face frame or panel cabinets Must be inserted with knock-in tool or insertion ram Specifications: Hinge Mount: Full Inset Opening Angle: 110 degrees Mount Type: Press-In Cabinet Type: Face Frame or Panel Blum, Inc.

is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casework industries specializing in lift systems, concealed hinges and drawer runner systems.

One of the most important parts of cabinet door is the hinge and one cannot compromise on the quality of hinges. It is important to source the best hinges for a long-lasting service. This hinge from Deltana is simple yet very attractive and it can hold the cabinet doors made of wood very well.

The best part about this hinge is that you can install it on your own as a weekend DIY project.

Are you looking to update the hinges on your classic, 3/8” lipped kitchen cabinet doors? Do you want smooth, quiet soft-close action and the easy adjustability and clean look of European-style hinges? These Rockler-exclusive Salice hinges are the perfect solution.

Whether you are retrofitting new hinges onto old 3/8” lipped overlay doors (especially common in mid-20th-century kitchen cabinets), or you are building new doors, these concealed hinges will give you the easy three-way cam adjustability that European hinges have become famous for.

Just mount the specially designed plate to the cabinet and attach the high-quality, nickel-plated Salice hinge. You can fine-tune the door’s fit with a turn of a few screws on the hinge. And because the hinges are completely concealed when the door is closed, your options for knobs and pulls are practically unlimited! Screws and instructions included.

Complete with plate and fixing screws (4 wood screws). soft close system (hydraulic). 35 mm hinge cup. for B&Q, IKEA, MFI, Wickes and other types of door cabinets. 110 degree opening angle. DetailsCountry/Region of Manufacture: Poland.