HDMI modulators over coax are devices that take an HDMI signal and convert it into a signal that can be sent over a coaxial cable. This allows you to send an HDMI signal to a device that is not directly compatible with HDMI, such as a TV that only has a coaxial input.
no the description says that it converts signals for the PS3 this was the reason for my purchase and upon receiving this item it did not work so this item was returned and now have to wait for refund to purchase the correct item also this item will not convert for a PS4 PC or Laptop this Description needs to be changed.
PVI VeCOAX-MINIMOD-2 1 CHANNEL HDMI Video To Coax 1080P Dolby HD Modulator Super Compact Series is distribute any HDMI Video up to 1080p Full HD & Dolby Audio, to an unlimited number of television over the existing TV Coax Cables, with perfect FULL HD 1080P digital quality at any distance.
This PETIT HDMI RF Modulator from Thor enables the conversion and transmission of video signals from HDMI sources such as a camera, DVD, receiver, or computer device to RF television broadcast signals.
The unit’s +24 dBmv RF output is powerful enough to transmit a signal for an HDTV broadcast to hundreds of TVs and supports QAM, ATSC, DVB-T, and ISDB-T CATV formats. The unit supports video signals up to 1920 x 1080p at up to 19.
5 Mb/s, MPEG2 video encoding, and AC3 audio encoding. Management is made easy with the built-in network management system (NMS) which is accessed via the PETIT’s 10/100 Ethernet LAN port. The NMS allows you to control the bit rate, channel selection, and resolution and to monitor your broadcast.
It supports 57 to 1000 MHz RF signals and channels 2 to 135. Its compact form allows it to be located anywhere in your broadcast setup, and the unit can be wall mounted. A 12 VDC power adapter is included to get the modulator quickly powered up and running.
Works well, but realize that HD digital encoding causes significant audio delays if connected TVs are within earshot range of each other. Pure analog video modulation/tuning configuration does not present this issue.
Expand your TVs entertainment value with the GE-branded Pro Series RF Modulator with S-Video. This compact device blends in with any entertainment setup and works with older TVs with coaxial inputs. It lets you connect your TV to a composite or S-Video-enabled device, such as a Blu-ray/DVD player, gaming system or cable/satellite box.
Plug-and-play installation is easy! Simply connect the modulators attached coax cable to the F-type jack on the back of your TV. Then, connect your antenna or cable/satellite boxs coax cable to the modulators F-type jack.
Then, you simply connect your auxiliary devices audio and video cables to the modulator. For the last step, be sure to use the included AC adapter to plug the modulator into a wall outlet. Power is needed for the RF modulator to work properly.
Now you can enjoy what youve been missing. Get the most out of your entertainment setup with the GE-branded Pro Series RF Modulator with S-Video.
A common problem with all the old entertainment systems and new tv’s! Easy to set up and worked perfect! Plug and play! No issues at all! This would have come in handy so many times in the past! Problem solved!.
This device worked perfectly for our older model TV in our RV. We do a lot of camping but missed our TV, this device came in so handy and was exactly what we were looking for. Will definitely recommend to our friends.
This product is realky good for older model types of televisions to use. Its good quality from manufacturer. Only thing is that you cant really use it for new televisions since they have all the ports you need already.
This RF Modulator allows you to convert your AV inputs into RF output signals Automatically AV Device to Home TV when AV Device System is turn on Shielded Coaxial Cables for a clear pictures Excellent for Satellite Receivers, Video Cameras, Video Game Consoles, CCD Cameras, Cable TV, VCR, DVD and more Video Input: 1-2Vpp, 75 ohm, Connector RCA Audio Input: -20d – B, 25k ohm, Connector RCA Antenna Input: 75 ohm RF Output: 75 ohm, Connector RCA This video system converterallows you to convert your AV inputs into RF output signals.
– Automatically switch from an AV Device to Home TV when the AV Device System is turned on. – Shielded Coaxial Cables make for a clearer picture and free from outside signal interference. – Excellent for Satellite Receivers, Video Cameras, Video Game Consoles, CCD Cameras, Cable TV, VCR, DVD and more.
br / br / strong Specifications: /strong ul li Video Input: 1-2Vpp, 75 ohm, Connector RCA /li /ul ul li Audio Input: -20d.
This may be a case of “you get what you pay for,” as other similar devices cost around fifty bucks, but I don’t know. I bought this in order to attach an old Roku One to an old tube TV which only has a coaxial connection (while the old Roku connects via RCA composite or hdmi).
So I needed an RF modulator to act as an adapter (RCA to coaxial)—and in that regard, it’s fantastic! Once I had it all hooked up, I was playing the old Roku on a the old tube TV and the picture was fantastic—crystal clear.
So, I was extremely impressed. But then I stepped into the adjoining bedroom and saw that the TV cable on a completely different television, in a completely different room, was going haywire. I walked back into the room with the RF modulator and unplugged it.
The cable TV in the adjoining room went back to normal. Then I plugged it back in and the cable TV went crazy again. While it plays the Roku nicely, this device clearly produces some really noisy RF interference which scrambles TV cable systems (when it’s not even attached to it or even in the same room)!.
This compact RF modulator allows your customer to connect an audio video component to a TV not equipped with an audio video jack. Its low loss, high performance circuit design provides accurate picture reproduction as it easily converts audio video to RF channel 3 or 4.
RF input – F connector RF output – F connector Composite video/audio input – RCA x 3 DC power input
Placing / Mounting
Reviews From Real Customers
It’s the one item that I needed most and it deed exactly what I was hoping for it would do, solved the problem I encountered with my new 55 inch Samsung tv. This RCA CRF907compact modulator filled the gap that was not fully explained by the manual of Samsung tv.
For additional information, the Samsung tv only have two HDMI inputs. 1 – For local cable set top box and 2 – for DVD and other input source. For the reason that I have a second cable set top box for a foreign channel, there was no more available HDMI input for the sub cable set top box.
However, since the Samsung tv has a VHF 75-ohm F-connector input, I used a 75-ohm coaxial cable to connect from the “to TV” output of the CRF907 modulator to the 75-ohm F-connector input of the tv. With a big surprise and satisfaction, it successfully worked! Therefore, I can safely recommend the RCA CRF907 compact modulator for other users who might have the same problem.
And as always, my trust with RCA products for a long time remained intact. To add to my satisfaction, my order arrived one week earlier from the date that was stated in the order confirmation.
Useless to me! Already returned. Very low quality. It probably wasn’t a faulty unit, just low quality. I connected my Satellite receiver box RCA output to this unit, and the coaxial end to a under-the cabinet TV in the kitchen.
The video worked, but the audio was horrible. To the point of unusable. Extreme distortion. At first, I thought the length of coax cable running to the kitchen was creating too much signal loss, or magnetic field.
Nope. I moved the small TV right next to the satellite box, and connected with a 2-foot coax cable. Same problem. I tried a higher-quality RF modulator and it worked perfectly.
I moved the TV in my RV, and I had to Cable running to it, but was unable to get the DVD player to connect to the TV. It previously connected using red white yellow cables on the back but now the TV was way across the room.
I use this box to connect the red white yellow cables and the coax cable to one coax which now ran to the TV. Works fantastic! However I will point out that it does need power. I wasn’t sure and couldn’t find you formation prior to purchasing it, but fortunately I have an outlet nearby.
The Belkin RF Modulator lets you view DVDs, video games, and home videos on a TV that does not have audio video inputs. Simply plug the S-video or RCA-type outlets on your peripherals to a coaxial input on your TV and use the RF Modulator to connect your AV equipment through your television’s RF jack.
Designed to save space, the RF Modulator features a removable base and offers a perfect solution for connecting DVD players, gaming consoles, and camcorders.
I wasn’t sure if this product would work per the satellite technician and this was the least expensive one that I could find. I switched over to HD TV and the satellite receiver does not have a coax cable out hook up on it and we needed an RF modulator to hook up the TV down stairs.
I hooked this up in less than 5 min. myself. This unit works perfectly! We get a great picture on the TV down stairs. I used site to store ordering. The unit came from CA. I live in IN. It was shipped over night to IL.
then was in IN the following day! Great service Walmart!! I highly recommend the modulator & Walmart’s services.
I bought the Belkin RF Modulator so that I could connect a new DVD player to my 1997 TV. I had no idea that my old TV would only have ONE connector in the back, and that’s for an antenna! So I now connect the TV to the RF Modulator, and then the DVD player is connected to the modulator.
Perfect little set up for a playroom where the occasional DVD will be viewed, but regular television isn’t necessary (though I assume the modulator would work with a digital converter box as well). Great buy, great product!.
Easy plug and play installation. DVD player connected to secondary connector and simply turning the player on connects it to the TV in place on the incoming TV signal. Light on unit turns green to indicate player (or whatever is connected to that port) is now routed to TV.
Turn off player and TV is automatically connected back to TV input signal. Can’t get any simpler than that. Even mechanical moron wife has no problem using it.
Watch DVDs or play video games on any TV in the house! This RF Modulator converts the video and stereo audio from any A/V component, and most video game decks, into a coaxial cable output. All you do is connect your A/V component to the modulator’s input jacks, then connect the modulator to your TV’s antenna/cable input and select channel 3 or 4 operation.
I needed a replacement for another digital converter that I had. This one is exactly what I wanted. Others available at Best Buy, Walmart, Target and other places cost $50 or more and had features that I did not need or want.
I only needed the converter to convert overair digital TV signals to my older analog TV, not record, not save programs, etc. Two simple connections and I was watching TV again!. great product!.
I take the signal I get from my DirecTv box and convert it to coaxial setup so I can run a cable out to my patioand watch tv out there. I just go to my garage to change the channel. one less box to rent.
Enhance your entertainment experience with this Component to HDMI Video Converter with Audio. With a plug and play design, it is simple to set up and does not require software. This device lets you convert and combine analog component video with corresponding audio (digital or analog) into a single HDMI output.
It is HCDP 1. 1 and DVI 1. 09 compliant which adds to the quality. This StarTech converter supports high-definition video resolutions of up to 1080p and up to 5. 1-channel audio. It provides you with the convenience you need of HDMI without the expense of having to upgrade your devices for compatibility.
This 4-way HDMI switch features S/PDIF Optical Toslink, digital coax, and 3. 5mm stereo output ports. The built-in audio converter provides simultaneous audio output via the HDMI, optical, digital coax, and analog 3.
5mm stereo channels to allow full integration of your exisiting stereo system. The included infrared remote control allows easy switching between the four inputs, audio muting, and selection between two-channel (stereo) and 5.
I have an older Pioneer Plasma TV that only has a single HDMI. I use a streaming box and a 50′ long HDMI cable from a receiver with an HDMI mirroring port on it. An HDMI powered switch wasn’t working (most likely due to voltage drop over 50′ of HDMI cable) so I tried this one.
It worked perfect and lets me easily switch between mirroring the other basement TV and the streaming box. One thing that threw me was when I first used it, voices were mute on certain programs. Other sounds were fine, but voices were completely mute.
Also, playing music through the streamer, it was badly distorted and sounded really odd. I was about to return the switch, when I came across some Q&A on the Home Essentials Direct product page and found out that these are set to 5.
1 dolby. There is no 5. 1/stereo switch on the box itself; you have to toggle it from the little remote. Once I set it to Stereo everything worked perfect. I also like this because it has a 3. 5mm audio output with an extractor so I can send analog audio out to my vintage Yamaha receiver!.
After inheriting an older home theater system, I realized I needed something to switch between my 3 HDMI devices as well as offer an audio out to the sound system. After doing some research I had decided to purchase this switch.
It was simple to install and was easy to use. The toslink audio works great from the switch to my sound system. As of this review I have owned this product for 10 months and it’s starting to fail. The video to the TV has started to malfunction by going black or scrambled display.
At first, I thought it was a faulty HDMI cable so I replaced it with a new cable and it seemed to be OK for a couple weeks but then the display started to go out again. It appears the HDMI Out port on the switch is failing.
For the price, I expected it to last a little longer which is why I deducted 1 star from my rating.
Blackbird hdmi extender over single 100m coaxial with bi-direction ir and loop out the monoprice blackbird hdmi extender can transmit hdmi video to distances up to 328 feet 100 meters over standard rg-6 coaxial cable.
More television manufacturers are omitting RCA analog audio outputs, leaving owners of legacy stereo equipment in the lurch. The solution is this HDMI audio extractor that extracts the audio out of your HDMI signal, while allowing the full signal to pass through.
By design this is a very nice device, especially because it’s intended to extract the audio portion from an HDMI signal, and then split the audio into 4 discrete pairs of analog L/R, thereby producing 7+1 analog surround sound channels.
Unfortunately, having tried any number of possible connections and combinations of settings, my observation is that only one of the four analog audio ports carries an audio signal (L/R front). Other than that, the item works quite nicely.
After trying numerous types of audio extraction devices, I decided to try one more. Really didn’t expect it to work. Trying to pull 2-channel audio from a Roku stick before it goes into my old Onkyo receiver and pipe it into my whole home audio.
I had several other units that would extract the sound but didn’t pass it on through the receiver. This worked perfectly. Now the wife is happy again!.
This Component Video +S/PDIFaudio to Hdmi converter combines your analog high def and/or progressive scan Y, Pb, Pr(Component)video signals withan S/pdif Digital Coaxor Digital Optical Toslink Audio from your source devices and outputs themin Hdmi format.
This allows you to connect your legacy Component Video sources to your newer Hdmi HDTVs and A/V receivers. No need to replace the high endvideo player you bought only afew years ago just because it doesnt support Hdmi.
This Analog to Digital converter provides a perfect interim solution until you decide to move on to the next great high def format. **Note – This device is a format converter, not a scaler. It will not upscale a standard definition signal into high definition.
It will simply allow a component signal to be plugged into an Hdmi port in a situation where no Component inputs are available. Hdmi, the Hdmi Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of Hdmi Licensing LLC in the United States and other countries.
This 4K HDMI signal booster lets you increase the signal strength of your HDMI video source so it can travel greater distances using standard HDMI cables. You can achieve resolutions up to 4K at 60Hz at distances of up to 30 ft.
(10 m), and depending on your desired resolution, the booster supports distances up to 115 ft. (35 m) away at 1080p 60Hz resolution. To install the booster, place it between two HDMI cables. Reference the table below for supported resolutions and cable lengths.
Astonishing picture quality with support for 4K (60Hz) at up to 30 ft. (10 m) away from your video source Backward compatible with 1080p resolutions at up to 115 ft. (35 m) away from your video source Discreet installation with no external power adapter required Maintains Ultra HD 4K video signals at 60Hz When you’re extending HDMI over distances using standard video cabling, higher resolutions from your HDMI 2.
0 devices can become unavailable after a few feet. Using this HDMI signal booster ensures that HDMI 2. 0 resolutions up to UHD 4K at 60Hz are available even at distances up to 30 ft. (10 m). Easy and discreet installation With its small form factor design and no external power adapter, the HDMI booster is easy to hide, for a discreet installation.
By extending your video signal using standard HDMI cables, the 4K booster is a cost-effective alternative to more expensive extension systems that require the installation of a CAT5 or CAT6 cabling infrastructure.
Supports a variety of distances The booster makes it easy to adjust your HDMI signal strength based on the distance of your cables, with equalization adjustment buttons. This means that you can adjust the amplification of your HDMI signal, to ensure your signal will be flawless.
Note: To achieve resolutions up to 4K60, your video source, display and cabling must support HDMI 2. 0.
I have a 50 foot hdmi cable running from my receiver my 4K HDR LG OLED TV. I would constantly get video drop-outs. I figured the signal was just not strong enough. The booster made a significant difference.
I do get a very occasional dropout but, only for a second. I consider this a success.
I might have gotten a defective unit but it did not work the first time I tried to use it. The signal was still in need of boosting. I bought a different one at Best Buy and it worked so the problem was definitely the StarTech.
Also this unit does not come with a power supply so be sure to get your own.
Monoprice 5971 This Component Video + S/PDIF audio to HDMI converter combines your analog high def and/or progressive scan Y, Pb, Pr (Component) video signals with an S/PDIF Digital Coax or Digital Optical Toslink Audio from your source devices and outputs them in HDMI format.
This allows you to connect your legacy Component Video sources to your newer HDMI HDTV’s and A/V receivers. No need to replace the high end video player you bought only a few years ago just because it doesn’t support HDMI.
This Analog to Digital converter provides a perfect interim solution until you decide to move on to the next great high def format.
Component (YPbPr) & S/PDIF Digital Coax/Optical Toslink Audio to HDMI Converter
1920 x 1080
HDMI modulators offer a number of advantages over coaxial cable modulators. First, they are much smaller in size, making them more convenient to use and install. Second, they do not require an external power supply, making them more energy efficient.
Third, they offer a higher quality signal than coaxial cable modulators, meaning that they can provide a better picture and sound quality for your television. Finally, HDMI modulators are more affordable than their coaxial counterparts, making them a great option for budget-conscious consumers.