20 Best Grip Module For P365Xl (2023 Updated)

These grips are great! I liked the color because it matched my yeti. They also are more comfortable than the ODI elite pro yeti grips. It would be cool to see you guys partner with Yeti on some builds and get a color match turquoise.

One suggestion I have would be to have grips that could have bar ends. Maybe design some PMW bar ends if there is a big enough market for it?🤷🏼‍♂️ It seems that ODI has a corner on the market regarding bar ends.

I can say that PNW’s design, materials, and fit and finish are ahead of some other brands. It’s clean and fresh. I just think your brand has a quality that others are trying for. I will say, my favorite grips are the ODI rogue grips.

I wanted to tell you this and why because maybe it will help with future designs…? The reason is because the rogue grips absorb a lot of chatter. They can be used on long grueling rides and stem fatigue.

Their compound is also very tacky while at the same time holding up to hours of abuse without wear and they wick away a good bit of water. I still have my originals after almost a year of riding in Colorado and Georgia.

I hope this review helps. Thanks for making some great products with cool color designs.

I have two bikes with the Loam Grips and they are great! When PNW released the Loam Grips in XL I had to give them a try. The same super- tackiness and grip but in a larger diameter. I’ll be buying the XL in blue to replace the regular Loam Grips that are currently on my Kona Process X.

I bought the safety orange and put them on my Salsa Timberjack that I use primarily for bikepacking now. I can spend long days in the saddle and my hands stay comfortable and on the bars, even when they’re sweaty or wet.

They look awesome on the Surly Moloko handlebars and I have the Coast Bar Tape on them as well. Looks super sick! PNW Components has me as a repeat customer and rightfully so. Killer products and the price point can’t be beat for what you get!.

As simple as these are. they sure make all the difference in the world. I was fortunate enough to grab a PS5 and a 2nd controller. The new controller is a considerable upgrade from those of prior PS consoles, but it’s also heavier and a little slick to hold.

The KontrolFreek grips are amazing. They apply very easily, but if you do make a mistake while installing them, rest easy knowing they can be removed and replaced fairly quickly. They feel great in hand with NO sweating or wear.

No sticky residue on your expense controller and they feel “plush” with each squeeze of the joystick. It’s textured and comfortable to the hand while playing. highly recommended.

If you get sweaty hands or just want better comfort for your Xbox controller then these grips may help. With soft cushion and textured grip on the surface that wrap around the front and back of the controller your hand and fingers will feel comfort as you game for long sessions at a time.

Easy to apply and removable if you don’t want to use it anymore. I’ve put them on my controller and now I can’t play on a controller without it as it feels less comfortable. That’s how used to it I’ve gotten to it.

I cannot say enough about both these grips and the company standing behind their product. I never knew these were available until I saw my kids had KontrolFreek grips n’ sticks on their controllers. I purchased the FPS Galaxy sticks and the Performance Grips XT.

I could NOT believe how much better the controller felt in my hand. I will no longer be able to game without these products. I was extremely impressed with the customer support as both ends of my grips became undone after 3 months.

I was meticulous in cleaning the controller before applying the grips on so I decided to email customer support. I received a reply in under 24 hours and requested a replacement pair. Within 2 days I had them.

KontrolFreek has a loyal customer for life.

I’ve been using these on my bikes for years now. I prefer the Chunky over the Extra Chunky, but for rigid bikes or hardtails the Extra Chunky has a little more cushion. The hand feel is better to me on the regular Chunky version.

These are so much more comfy than rubber grips and keep the hands feeling good after a hard day of riding. I have fairly large hands (glove size L) so I can use either thickness comfortably. However if you have smaller hands the Extra Chunky might be too much.

I get a pretty good amount of life out of these but they do tear easier than some harder rubber grips, especially around the bar end areas. I don’t get any throttle after installing these with some rubbing alcohol which can’t be said about other brands like Oury.

The only downside is that riding gloveless if you get sweaty hands these start to become a little slippery after some time on the bike.

I switched to ESI Chunkys on a friend’s recommendation after suffering sore forearms for a week from riding the LPS with normal rubber grips. I haven’t used anything else since. Recently stepped up to the Extra Chunky and love the extra volume.

If you happen to forget your gloves at home, the Chunkys will save your hands. Good gripiness even with sweat and no blisters. I’ve had one or two grips split from falls where the handlebar end hit the ground and a rock must have pierced the grip.

Otherwise, they’ve been durable and I’ll take a grip I have to replace every now and then for the superior grip and comfort.

I sustained a seemingly permanent hand injury when some fool threw their car door into me last year whilst I was pedaling my bike to work in the bike lane at roughly 20MPH. Broken pinky finger right where it joins on the palm of my hand.

The surgeon fixed it, went to physical therapy for several months, but still get hand fatigue on long mountain bike rides. Fortunately I have ESI Extra Chunky grips on most of my bikes (running the Wolf Tooth Fat Paws on two other bikes, theyre slightly cushier) and so I can ride without major discomfort on 100+ mile mountain bike rides.

Was running ODI lock-on grips before the incident, but cannot go back to those anymore. I am partial to ESI Grips since they used to me one of my sponsors for the MTB racing team I was on from 2014 2017, but their grips ROCK! Oh, and these are PURPLE!!!.

Very nice pistol grip shifter handle. I had the T handle prior but love the pistol grip. I did have an issue with the thread inserts, my shifter requires a 3/8-24 thread and insert that comes with it is 3/8-16.

Not a problem though, being a machinist I ran the numbers and the M10x1. 25 thread insert is pretty close to the 24 pitch I needed so I chased the thread with a 3/8-24 tap, perfect! I initially thought it was a bit pricey but I got what I payed for! Thank You Summit!.

I have always wanted to have a hurst pistol grip in a car. This shift knob feels great in my hand and it definitely helps to not miss a gear.

The product was well made with several different universal fittings , I received it earlier thN expected and , easy instalation.

This thing is solid when mounted. Satisfying shifts. I will say a few things as a warning. Most of the internal working components are stamped metal, so the edges are unpolished/rough. The thickness of the parts isn’t the problem, but in some places the detent gets stuck when riding through the gate.

Places that are one-way get stuck, and you have to pull the trigger to get it to shift. The reverse lockout also has this issue. After removing all the burrs, filing all the sliding faces more round, sanding the roughness out, and adding grease, it shifts like a dream.

I mounted the red reverse tab the opposite direction as the pictures so I could shift it with one hand. (Push with ring finger) This may be against regulation but I put this in a street car. Last bit, if you have big sausage fingers, the trigger will pinch your hand when you pull the shifter from neutral to 1st while fully gripping the shifter.

I can feel it tapping my finger when doing that motion. For 350 bucks, the cover could be sturdier but again. Race car.

Nothing wrong with shifter itself,it looks good ,well made , it is what it says it is. But personally I’m use to a ratchet shifter. This one here you have to push lever forward and push stick forward to go.

into reverse. I will get rid of this one and replace it with a ratchet shifter.

I just bought the Sony RX100 VII and after trying out all the features Im very impressed. First the good. This camera has literally everything I want in a point and shoot 20MP, 28mm wide angle, excellent autofocus, amazing picture quality, great optical zoom, external mic input, 4K video, an excellent Zeiss lens and a size that will easily fit in my pocket for travel.

Now two negatives1 The price. For me its worth it, but 1200. 00 is a lot to pay for a point and shoot. 2 The supporting software. Im a Mac user and most of Sonys supporting software does not work at all on Mac Catalina 10.

15. The Windows software is abysmal as well. Example the Sony PlayMemories, which is the main software for importing photos and videos, simply does not install on Catalina. Id love to transfer my images wirelessly to the Mac, but so far, no luck.

Im not sure if the installation support instructions are just poorly written, but after several hours of struggle I gave up. Since I usually transfer my images via USB or SD card, this is not a huge deal for me.

The rest of the camera works flawlessly. Hopefully they will provide Catalina support before the next OS comes outI really appreciate the Sonys quick autofocus after returning a brandnew Canon G7X MIII.

The G7X MIII has a fatal problem with video autofocus which even a firmware update could not fix. There are many posts on YouTube about this. I was a real Canon fan up to this point, but not anymore.

So bottom line, even with the price and software issues, this Sony RX100 VII is exactly what I was looking for. Highly recommend.

I was gifted the camera and will use it mainly for travel photography, as a bridge between my everpresent iPhone and my bulky full frame mirrorless and DSLR kits. The build quality, mechanics, electronics, and optics are all excellent.

Hey, it is a SonyThis is an unbelievably versatile and diminutive camera which helps you create high quality stills and videos. Im very happy with it so far, especially after a couple minor modifications.

These include adding the Sony grip AGR2 plus a small piece of Velcro to enhance grip, and a small tab on top of the shutter release to improve the halfpressforfocus function. These changes resolve my concerns about slipperiness and the flat ergonomics of the shutter release.

The camera has the functionality and versatility of a much larger camera, which of course you are paying for. I would not recommend it if youre going to shoot stuck in the Auto mode. Youd be wasting your money by neglecting the cameras flexibility and creative options.

If youre an Automode shooter, there are better options for you for a lot less money, or just stick with your smart phones camera. I rated it a fourstars mostly because of the high initial price. If it was a few hundred dollars less, it would surely be fivestars.

By the way, some reviewers on other sites noted the lack of an internal ND filter and no external filter threads. You can buy an external filter kit for a few dollars, but it seems a bit clunky.

Lets get rid of the most obvious con with this camera ITS SOOO DAMNED EXPENSIVE So why did I buy it, because for its diminutive size its a video and photographic powerhouse. Sure it has compromises sensor size, max aperture, the list could go on if you want to get silly if you expect the magicians at Sony to quantum engineer a full frame megazoom camera into a pocket camera.

The image quality is as good as a 1 sensor currently gets, the zoom range is all you need for at least 90 of situations, the AF is amazing. The built in micsaudio not bad, plug in a decent external and its a game changer, Ive used with a Rode stereo videomic pro, Zoom H1n and blink 500 wireless lavalier mics, all with great success.

The 4k video is very good, and for me, even up to iso 16003200 acceptable for my life and holiday vlogging. I had been using a Panasonic FZ2000 with an Osmo Pocket and Insta360 One X but the Panny just added so much to my bag that it started to interfere with the spontaneity of life events, I aim to record these events well but not go for a Spielberg production, The sony is small and stealthy enough to do just that, but its so damned expensive.

, but its the most compact photovideo powerhouse you can currently get, so yes, I bought it and the only regret is the kidney I had to sell to buy it As a final note, the build quality, as with all the RX100 series from the original version I still have to this Mark 7, is excellent.

The image quality is very slightly better than my original Mark 1 but were talking pixel peeping here so unless you want the zoom range 4k video and mic input, look at the other RX100s or the ZV1 I considered that for the latter two features but the short zoom range didnt cut it for me.

Battery life is chronic, but having owned numerous compact and mirrorless system cameras over the years this becomes a fact of life but the greedy little Sony and its equally tiny battery warrants the need for backup batteries almost at all times.

I’ve owned the #3 of the Tecgrip pocket holster now for over three years. Use it for both my Kahr PM9 and S&W 642 snubbie. Carried it hiking and often for EDC. Still in great shape, but just bought the #8 made specifically for the little j-frames, and it works equally well.

For pocket carry, I can’t imagine anything better. Definitely outlasted other brands I’ve owned.

After wearing the product for a few weeks I have found the imprint of the barrel nose is beginning to wear through the material from the inside out. This is due to weight, gravity and force used in placement of the firearm.

The soft/ light fabric in the inside is in contact with hard, cold steel. The factory should reinforce the inside/bottom 2 inches of the holster so as to alleviate this wear. We’ll see how long before the metal bites through the bottom section due to wear.

Overall, the feel is good, the friction is good. The wear will be a problem for this product. I may have to use some duct tape or something to reinforce the inside/ bottom myself. Curious how long these holsters were worn and tested before massively produced? I.

I didn’t expect this holster to be everything promised in the ads, but I was wrong. No, this holster isn’t the one to use if you feel that you are likely to get involved in a bar fight. But for everyday use, and especially driving, it works very well.

Unlike most clip-on, stiff holsters, this one allows you to quickly and easily shift its position a bit for comfort, getting in and out of a car. And it has so far always stayed where I put it.

I bought multiple products from caliber for a trailer I’m rebuilding. 3 out of the 4 different products I got were missing fasteners. These track grips were one of the 3. It has made my project take significantly longer than needed.

Annoying.

Another quality product from caliber. They recently redesigned the grips and the new model is not depicted on website or actual packaging. I needed the older style to match existing grips already on trailer.

Dennis Kirk was more than willing to exchange for the previous model. They were unaware of the manufacture change. Top notch customer service at Dennis Kirk.

The holster has two indentions that hold the flashlight in place. Because they are so pronounced it is nearly impossible to draw the gun. I had to replace the rubber bushings and use the longer screws that came with the claw that I purchased with the holster.

They could easily make those indentations much smaller–not being able to draw your gun is a potentially life-endangering problem. Also, the clip on the gun is very pronounced, protruding much further than needed to fit over any thickness of belt.

I tried to remove the screws so I could take out the bushings and draw the clip in closer to the holster, but they appear to have used some adhesive (red Loctite?) to keep the screws from coming out.

This isn’t a deal breaker, but I like some ability to personalize fit. While I can now use the holster, having to use some aftermarket extended bushings to make the holster loose enough to release the gun and not being able to adjust the clip made this just an Okay option for me.

BTW I had the same problems with the holster being too tight on a DeSantis kydex holster, as well–I don’t think holster companies have done good R&D for guns with lights.

I have owned many holsters IWB & OWB over the past 25yrs. This holster has good retention keeping your weapon in the holster where it belongs. There is another key point I need to touch base on here.

The retention is strong enough to keep your weapon from accidentally coming out although you will have no issues drawing your weapon in any situation. There’s no tugging, struggling or super human strength needed to get down to business.

God forbid the time comes to protect yourself or others in a situation that has gone bad and has you in fear of your life and or someone else’s life. I can testify that with a little practice you will be able to draw from the holster possibly quicker than any other holster you have ever used, owned , etc.

GREAT PRODUCT AND THE HOLSTER CLAW KIT IS HANDS DOWN THE WAY TO GO FOR WEAPON CONCEALMENT AND PERSONAL COMFORT!! BTW I am a bigger guy and love it!!! I highly recommend both of these products to everyone who is looking for durability , safety, comfort and their new go to holster for any occasion! Thank you for such an amazing product! I will be ordering more in the near future.

Tks Again!!!👍🏻💪🏻💯%.

I had been looking for an IWB holster for my gen 1 Baby Eagle/Jericho compact for awhile. Stumbled apon this and figured I would give it a shot given the price. I was pleasantly surprised on how nice it was when it arrived.

My pistol did have a little play in the holster, but was to be expected as it wasn’t built for it. I was also glad the holster didn’t interfere with the slide mounted decocker. The adjustment of the retention is great as is the cant.

I took a heat gun to the top/slide edge of the holster and gave it just a little pinch, the gun now fits tight in the holster. The holster is about a half inch longer than the end of the muzzle, have not decided to trim it yet.

So, this is a long review for a holster that wasn’t built for my gun. I can only imagine how well it would fit one it was actually built for. But, if you are looking for an inside-the-wasteband holster for an old steel framed/no rail Jericho or baby eagle I would recommend giving this a shot.

The “granulated” grips are very grippy, because they are like a fine grained sandpaper, with a very sticky backing. They are not rubberized, they are really like an abrasive sheet. Prior to this, I had no problem holding my M&P Shield 9 mm.

But when the Talon grip was applied, I was surprised how much I benefitted from having an even better grip. Very secure. Other low customer ratings for the Talon grips are probably due to people who purchased the wrong model–mine fit exactly, and since I used heat to bond it as the directions said, I have had no problems.

Well, the complete truth is that it fit exactly, with no problems, except for the final step of application: The entire grip is designed to fit the shape and contours of the Shield 9 mm frame grip. It goes on easily and matches up with the pistol’s grip as you start on one side and wrap it around the grip.

The problem is where the last section that you wrap around the front meets the left side where you started. Every other part of the grip is cut to fit exactly, but the final part ends strangely, and must be trimmed by hand to fit, or tucked partially under the initial sectioned applied.

Not a problem, but it is unexpected.

I have these on 3 pistols and absolutely recommend them. They only show the rubberized grips on this site but that’s what I suggest for ccw. Their sandpaper style are too aggressive for carry. These will fit your specific pistol like a glove.

They are computer cut for an exact fit. Easy to install when following the instructions. After final fit you heat them with a hair dryer and mold them down. They stay where you put them and don’t shift around.

They are thin so they don’t increase the hand purchase. Not cheap but good stuff isn’t. Money well spent.

I purchased and installed a custom cut set of Talon grips on my XDM 45 caliber 5. 25. My shooting improved immediately because the gun is now firmly in my hands with no slippage or twisting of any kind.

I highly recommend Talon grips to anybody who has a hard time finding custom grips for their gun. And if you apply Talon grips according to their instructions and do it properly you will have no future problems with curling or slipping.

Highly recommend this product.

I’m giving this signature holster a 3 star review for a few reasons which involve bad design flaws which led to a failure. I would have given it a 2 star but the good customer service at Bladetech inclines me to give it an additional star.

My holster which I purchased in 2019 was only used a hand full of times per year for approximately 3 years at shooting competitions uspsa style. It had carful light use, nothing that would have warranted for it to rip open and completely break apart like a clam at the seam.

I will try to provide photos if this system allows me. The design is a one piece cast with 2, 1 millimeter or less thick spots where they bend it to make the holster. that tiny piece which is holding the entire holster together is not sufficient to withstand even light use let alone real life dangerous situations.

I contacted Bladetech about it, they covered it under warranty however I had to show proof of original purchase, photos, explanations on my use and a few other details. they charged me for shipping and quickly sent out a new signature holster.

I wish they would have given me an option to pay the difference and upgrade to the original holster which I believe is better quality (not sure how the construction is where the 1 millimeter bends are however).

for the most part the signature holster does its job well, it retains the pistol, and you can adjust the retention tightness. I like the adjustability of the whole system and all the attachments that come with it.

because of the good customer service I’m giving this signature holster a 3, but Blatetech needs to find a better construction solution for the thin wall where they bend it, because it is prone to ripping open and I’m sure my new signature holster will fail at that spot as well.

I bought this holster to use with the Smith & Wesson M&P 2. 0 flat face trigger, optics ready pistol in 9mm. I have attached pictures showing that the curved trigger M&Ps have a slide stop/release which is nearly flush with the sides of the pistol.

In the case of the flat-faced optics ready pistols they have extended the surface area by changing the geometry of the slide stop / release to no longer be flush with the pistol. This may create mechanical advantage for manipulation of the pistol though it leads to the problem shown in the last two photos where the slide stop/release gouges into the holster and in turn the holster scrapes finish off the metal.

To resolve this the design needs a mini tunnel for the slide release. The Holosun 507c X2 also scrapes against the 2 sweatshield wings a small amount. This could be alleviated with widening the gap by 1-2mm.

This would prevent rubbing against the rubber gasket for the battery compartment since the edge of the wing is right at the same level. The trigger is completely enclosed and has great retention. I am not worried about the pistol coming out unless I draw it.

The concealability is top of the line and rides very close to the body when paired with an appropriately rigid gun belt. It would be great if they made this in a dedicated 4-in version that was nicely finished off rather than having to buy a 4.

24 inch version then cut it down ourselves so that we don’t have unnecessary muzzle length.

First off I know what a lot of people say, They are expensive for just a extra battery and some buttons. True but not the whole story. This Sony grip is weather sealed and has enough controls at your fingertips to control the A77II one handed.

The extra battery capacity is a big bonus with the dust/water sealing the icing on the cake. You will need a weather sealed lens to take advantage of it but i also don’t use my Camera as a Depth charge if I can help it.

Rain gear is always a good idea with the weather sealing added insurance. In my opinion Sony accessories are worth it and the quality is there with no question. For me the grip just makes is much easier to keep my grip on it.

I have had vertical grips on my previous DSLRs. This is an absolute must if you just want to be able to get on and take photos. While the new electronic viewfinders are now up there with the best optical viewfinders, they do take a hit on the battery life.

This lovely piece of kit will alleviate all those worries. It also replicates a lot of the controls so taking images in portrait orientation is a breeze. To sum up an excellent accessory for your camera.

Bought this some time ago but still enjoy using it with my a77ii (I believe it also works with the a99ii). The power level of both batteries in the grip is shown in the viewfinder and LCD monitor. I can do an all day shoot without worrying about running out of power and changing batteries.

The grip allows the camera to handle well in portrait orientation as it does normally.

The Hurst billet/ pistol grip shifter is Awesome! I was on the fence for awhile about purchasing this shifter because of the install and how it might look. After looking at other customers pictures and videos, I made the purchase.

Iam so glad I did the install is not bad at all you need the right tools and Patience. The instructions were very easy to read and helpful. After the install was complete. The shifter feels like an old School Shifter that classic feel and look.

I wish I did not wait so long. It feels and looks how it should Badass!.

I used to have a Hurst shifter on my ’78 Z28, so when I saw this I had to have it for my new 2021 Challenger. For some reason the website thinks I have a Charger and won’t let me change the vehicle. Solid construction, easy installation, and works great.

My one complaint is that the trigger is poorly designed from an ergonomics standpoint. Because or of the sharp point and steep slope on the trigger, when I’m actuating the shifter my finger is pressing right on the tip of the trigger, and if I try to move my finger down, it wants to slide into the finger groove below.

I painted it to match my interior and put on the blackwood side plates, and I love it overall, but I’m going to end up taking it back apart to custom-profile the trigger. I don’t feel like I should have to do that on a $250 shifter, which is why I deducted a star.

I finally decided to get something to change the interior look a little and went with this Hurst Pistol grip Automatic transmission Shifter. And it looks great! It functions perfect and it feels like a typical quality Hurst product.

Install was so easy thanks to the CJ Pony install video. Best Installation Videos you can ask for, Bob makes it so easy and understandable. I recommend this part if you want a cool look inside your S550!!.

First line broke at splice for handle on 3rd use first day i had it on water. EVO was great on a warranty replacement. I have yet to use the new one so hopefully it does better. Quality seems good overall, I am sure i just got a rare bad line.

Handle is top notch and comfortable. Barely if any stretch in line. Night and day difference from budget offering i had before this less the issue i experienced.

Overall the rope seems fine. I’m very disappointed in Ronix and this product in particular. I’m a beginner and so is my wife. The foam pencil float sheered off after a morning of wakeboarding and Ronix will not cover it under warranty.

Now the handle won’t float which is extremely inconvenient when doing water sports. I’ll never buy a Ronix handle again.

Purchased the bar for my kids. I like the shorter length of the main line. It is hard to find any other rope with the shorter length other than making it yourself, which should not be hard, but price-wise, won’t be much cheaper.

Quality looks good on the bar. I went with this rope because it is like a regular ski line that will stretch and be forgiving for a beginner. As they progress and start learning tricks that require tension of the line, such as tantrums and raleys, you definitely want a non-stretch dynema or spectra rope.

But this currently works well for the kids and for my wife.

I received my order in record amount of time, that’s fantastic. I have 2 other Tulster holsters, both are Profiles, love them. They’re comfortable. I can slide them into my waistband in my truck. I can move them around when they get uncomfortable, and they look really good.

I purchased 2 Oaths for my HK and my Ruger. Liked the look of these holsters but I can’t get them to work. They’re uncomfortable, the guns either to low in my jeans, to where it’s awful when I’m sitting down, ( the barrel jabs into my legs) in the wrong place, so that with that metal clip I can’t, one: easily slide it into my waistband, two, slide it around to adjust it, three, the wing catches when you try to slide it into your waist so you have to undo your jeans to affix it anywhere, (neither of these guns have enough of a grip that they stick out really negating the reason to even have the wing in the first place), then you need to know exactly where you want that holster to be because between the clip and the wing- it’s not moving.

The clip makes it hard to remove the holster because like my German Shepherds, once it has a grip on something it’s not letting go, and prying it open sometimes is kinda difficult. And finally, for some reason my shirt wants to slide down in-between the gun and holster when you reholster, I know, you have to make sure that doesn’t happen, I Know.

But I’ve been carrying quite awhile now and I don’t have that problem with the Profiles. I don’t know if it’s the cut for the red dots or what but I was spooked the first time that happened. So I’m extra aware, as you should always be, where everything is when I’m wearing these.

Tulster has always treated me well, fast ship, periodic discounts, they came packaged in a bag which I liked because I get enough cardboard since COVID nowadays, they are a great company, so I don’t like sending a unhappy story.

I have taken the wings off, I made a couple of small bushings to replace the wing, I used the 2 shims on both holsters to set my retention which I really like. I like how small they are and I really like the black multicam.

I’m not done with them and I’ll continue to work with them, it just hasn’t been love at first sight for me. ( Been doing this long enough that I know what holster works for one might not work for everyone, we’re all built different) thanks for your time.

Got this holster for a custom P365 Build (P365 FCU, Armory Craft grip, True Precision Slide with threaded barrel, with Armory Craft compensator, and Holosun red dot) With the compensator on the barrel it was closer to length of an XL (probably a 1/2 inch longer than a stock XL length).

So thought I’d just order the XL holster. Compensator ended up being too long for the holster and for me to really conceal comfortably and again wouldn’t fit holster unless I cut or heated and remold the muzzle end of holster.

Didn’t really wanna do that considering length was gonna be too long to comfortably conceal anyway so I removed the compensator and just stayed with the threaded barrel only. this holster keeps the barrel from sticking out the bottom of the holster.

which I like. However I had to use two nylon washers between the kydex where the claw mounts to allow the fit of what seems to be a bit thicker slide and/or rail or trigger guard on the after market grip and slide.

Seems its not an exact match when it comes to stock p365 pistol. Retention could be better but not for any fault of Tulster, gonna try 2 thick o-rings instead of the nylon spacers to see if I can get the fit and retention better.

I”m sure it’d be perfect for stock p365 or p365XL but have had to modify slightly to get it to work with my custom pistol. All in all I am very happy with this holder. Looks great, and is comfortable appendix holster.

This is my second Tulster OATH IWB holster. The first was for my Springfield Amory Hellcat, and this new one is for my Shadow Systems CR920 WARPOET PISTOL. The holster’s fit and finish is superb, while the spring-steel belt clip secures the weapon well to your carry belt; however, I will say that it would be nice if there were two opposing clips (on either side) for a more secure attachment.

This second point of attachment would facilitate a more accurate / repeatable draw stroke. The negative of having one clip. the weapon’s cant changes with body movements. A much wider clip (at the top), along the belt’s top edge could possibly solve this issue if continuing with the solo-clip design.

The kydex is molded precisely for your specific weapon which helps with retention; however, it would be advantageous having an adjustable retention system that would allow for an even stronger hold in the event of a fall or (God forbid), a struggle for the weapon during an altercation.

I give the OATH IWB 4. 5 STARS! P. S. I find this particular holster to be VERY concealable (more than most) under just a t-shirt! I highly recommend the Tulster OATH IWB holster for your EDC setup. Regards, Mr.

E. Ortiz U. S. Army Veteran.

I got this holster because I was upset with how my gun wanted to fall out of my alien gear holster. The alien gear one was awful uncomfortable anyway. There would always be a sharp edge digging into my hip joint any time I sat down.

That one also made me sweat like crazy. I’m much much happier with my amberide. It’s not so heavy and in the way. I’m a curvy female and this has been the best iwb belt I’ve experienced. I wear my gun a lot more often now that I like this holster much better.

It seems most holsters aren’t made with women in mind. If there’s one marketed to women, it’s usually a piece of junk that the gun will fall out anytime you go to pick something up. I love having the retention on this.

I barely had to cant mine from the original position. The only thing that I would knock is that it’s uncomfortable to wear this without your gun in it. So if you have a doctor’s visit, it can get very uncomfortable.

The quick clip can make up for it but then I just have to readjust my belt. It’s very easy to get this off and on. My gun balances nicely too. I feel like I print less eith this one than the alien gear one.

When I showed my husband this amberide, he kept questioning me if this was the one I want. I said I’ve been in this long enough to know what I want. I wouldn’t be showing him this if it wasn’t what I wanted.

I had him try my other alien gear one for another gun I had that had the same sharp edge digging in the hip problem. Now he understands what I went through! I just love having this be a bit more minimalistic.

Customer service is a lost art these days, but Amberide has set the standard. USPS lost my package, and Amberide did not hesitate to immediately send out another one. The holster is exactly what I wanted.

Only complaint I have isn’t really a big one. more of a cosmetic complaint. I ordered the blue carbon fiber IWB holster for my SIG P365 SAS. I thought the carbon fiber would look a lot more “real” than what I saw online in the photos, but cosmetic issues aren’t really a big deal to me.

I am thankful for Amberide’s products and customer service. I plan on buying another holster from them for the next gun I buy. Thank you, Amberide!.

This holster is all around good. Gun fits perfect, clicks in, adjustable retention, all around fairly comfortable. It’s not great for women. If you wear baggy clothes, maybe. If you wear even semi fitted clothes it’s too bulky.

It’s mainly where the clip attaches to the holster that shows bad. If the clip were located where the retention screws are, it would be alot better.

Second holster now from Concealment Express, 2 different guns. Everything down to the finished edges and appropriate deep concealment adjustable c-clip mounting options are perfect. This company has twice now proven a top notch kydex holster doesn’t have to cost a fortune! Thank you!.

These are such a comfortable grip and I love the colour way plus they are really affordable, highly recommend!

Strong, comftable and core grips can match any set up colour way!

Such lush and comfortable grips would highly recommend!