20 Best Floor Jack For Cars (2023 Updated)

This heavy duty 3 Ton car jack gets vehicles almost two feet off the ground. A protective foam bumper on the jack handle protects vehicle surfaces from damage. Dual piston Rapid Pump technology lifts most work loads in just 3-1/2 pumps.

When you’re raising up something heavy you want to know you’re using the best equipment available. The Pro-Lift 2-ton Low Profile Floor Jack is made entirely of heavy-duty steel for long-lasting durability and features swiveling casters at its base so you can easily maneuver the hydraulic jack to that perfect position.

Capable of lifting up to 4400 lbs. , this jack also features a patented bypass device that protects against overpumping and a built-in safety valve so you can always operate the lift safely. This ANSIPALD approved jack’s lifting range measures 3.

5 to 14 inches in height.

Floor service jack specially made for SUV. Constructed of high-grade steel and built to exacting standards for quality and durability. Large saddle surface area provides better contact with the load being supported.

Positive locking safety release handle for exceptional safety during use. Integrated overload protection valve prevents the lifting of items in excess of capacity. Dimensions of 26” x 11” x 8” (66cm x 28cm x 20.

3cm). Capacity of 3 tons (6 000 lbs).

The Sunex Rapid Rise Technology reaches max height of 19. 3 inches in 7. 5 pumps. Side mounted handles for easy jack positioning. Wide track wheels for easy maneuverability. Rubber saddle pad and foam bumper pad protect vehicle.

Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability. Wiper seals protect hydraulic system from contaminants. Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and ram over extension.

Ball bearing mounted rear swivel coaster wheels and wide track front wheels for easy maneuverability. Two piece handle for storage; quick lock feature for engagement and disengagement of handle halves.

Access low lift points using the SUNEX 2-Ton Lowrider Service Jack. Featuring a ram piston jacking mechanism, its entire frame incorporates a low-profile design for easy positioning under extremely low heights.

Providing a minimum elevation of 2. 75 inches, this Sunex service jack comes with an 18-inch throw that extends all the way to the outer pinch welds. Ideal for sports cars and other low-built exotic vehicles, it is also suitable for changing flat tires.

Engineered with rapid rise technology, this Sunex pneumatic service jack generates enough lifting power to raise pickup trucks and SUVs as well. Its integral dual pump pistons allow you to reach the 24-inch maximum height in 6.

5 pump strokes. Made from premium steel, the jack’s durable construction ensures a long service life. Sunex products feature structural and functional integrity, which helps Increase the speed for quick load lifting.

Access low lift points using the SUNEX 2-Ton Lowrider Service Jack. Featuring a ram piston jacking mechanism, its entire frame incorporates a low-profile design for easy positioning under extremely low heights.

Providing a minimum elevation of 2. 75 inches, this Sunex service jack comes with an 18-inch throw that extends all the way to the outer pinch welds. Ideal for sports cars and other low-built exotic vehicles, it is also suitable for changing flat tires.

Engineered with rapid rise technology, this Sunex pneumatic service jack generates enough lifting power to raise pickup trucks and SUVs as well. Its integral dual pump pistons allow you to reach the 24-inch maximum height in 6.

5 pump strokes. Made from premium steel, the jack’s durable construction ensures a long service life. Sunex products feature structural and functional integrity, which helps Increase the speed for quick load lifting.

Simplify Working on Your Car with the American Forge IN200T Low-Rider Floor Jack The American Forge IN200T Black and Red Low-Rider Floor Jack is suitable for working with a low profile tuner and high performance vehicles.

This unit is equipped with a double pumper feature that can quickly lift the vehicle from a height of 2. 75in. to a height of 20in. The universal joint technology and precision release valve permits a suitably controlled release.

The pinned steel saddle comes with a rubber pad for added protection. The tough frame comes with a resilient powder painted finish for added durability. The 1pc foam covered 50in. handle offers great ease to your pumping, positioning and storage.

Be safe as you work under the car with this smart floor jack.

Get rid of your floor jacks, transmission jacks and ATV jacks. The 2 Ton Triple Lift jack is three jacks in one! This innovative jack has a patented design that lets you lift cars, trucks, motorcycles or ATVs with ease.

The Triple Lift slashes the expense and hassle of purchasing, maintaining and storing multiple jacks and jackstands. It’s the one jack that easily lifts almost anything with wheels, and works on vehicle transmissions and differentials too.

The secret to the Triple Lift is the patented design that features both a removable lift saddle and padded lift rails. This flexible design allows the Triple Lift to adapt to multiple types of vehicle frames.

A locking safety bar holds the jack in place once the vehicle is raised, which eliminates the hassle of supporting a lifted vehicle with jack stands. Built-in tie-down loops make it easy to secure motorcycles in place for added stability.

You can also use the Triple Lift to safely lift Unibody vehicles. The precision locking design keeps the jack from lowering once it has been raised, eliminating the need for a separate jack stand.

Professional Low-Profile Aluminum Floor Jack2-Ton – Low-Profile – 3-1/2 inch – Weight: 49lbs – Lifting Capacity: 4,000 lbs. 4-9/16 inch Dia. Lifting Pad – Meets ASME PALD 2014 standards Features:Aluminum construction Lightweight Saddle rotates 360 Minimum Saddle Height: 3-1/2 inch (good for low-clearance vehicles) Maximum Saddle Height: 19-1/4 inch 50 inch two-piece handle with sleeve (protects vehicle during use) Knurled grip reduces slippage – Dual side handles simplify maneuvering/positioning Hydraulic Lift: 15-3/4 inch – Rubber lift pad prevents marring Chassis Length: 26-1/2 inch – Chassis Width: 13 inch.

This Big Red 3 ton Floor Service Jack has a safety overload system to prevent use beyond rated capacity. Comes with a two piece handle for easy transportation and storage. The wide stance value prevents the jack from overlad.

Use this multipurpose floor jack for everyday garage service or heavy-duty industrial lifting jobs. Features include a blow molded case for easy transportation or storage.

One pump Feature reaches contact on most cars 2–3/4″ low height and deep reach lift arm is ideal for use on low ground clearance vehicles – Dual pump pistons are shielded to prevent contaminants from damaging the hydraulic system – Internal by-pass valve protects the hydraulic system from over pumping – U-Joint release mechanism provides precise control of load descent in any handle position – Heavy gauge construction features rolled edges for added strength – Protective foam cover on handle prevents vehicle damage – Upgraded casters allow greater maneuverability and easy positioning of the jack Full cover rubber saddle pad protects the vehicle from damage during lifting Min Height: 2-3/4″Max Height: 24″Handle Length: 49-1/4″Jack Body 35″ in Length – Length from pivot point to center of jack pad i 22″Front Casters: 2-1/2″ diameter x 2″ width – Saddle Diameter: 4″ with full saddle pad ANSI / ASME PALD 2009 Certified4000 lb Capacity – WARNING: This product can expose you to Nickel (Metallic) a chemical known to the State of California to cause Cancer.

– P65Warnings. ca. gov.

The Husky 3-Ton Low Profile Floor Jack with Quick Contact has a dual-pump design for a quick and hassle-free lift whenever you need it. This 3 Ton Low Profile Floor Jack can quickly lift up to 6,000 lbs with a minimum height of 3-1/8 in.

to a maximum height of 19-3/4 in. Rear swivel caster wheels on the Husky 3 Ton Low Profile Floor Jack offer easy positioning under cars, trucks, and SUVs. The 3 Ton Low Profile Floor Jack with Speedy lift consists of a plunger, plunger cavity, hydraulic oil reservoir, cylinder, and ram.

An upward stoke of the jack handle draws oil from the reservoir into the plunger caity and a downward stroke forces oil into the cylinder, pushing out the ram and raising the saddle. This car jack is the perfect car accessory to add to your Husky automotive and tool collection.

11023 lbs Pneumatic Car Jack High Loading Capacity Well Constructed Thickened Rubber Folding Handle Easy to Use Wide Application Specifications Capacity: 5. 0 ton / 11000 lbs Min. Height: 165 mm/5. 71 inches Max.

Height: 400 mm/15. 75 inches Air Inlet: G1/4 Color: Blue Lifting Time: 5 Sec Working Temp: -60°C~ 50°C Capacity: 5. 0 ton / 11000 lbs Min. Height: 165 mm/5. 71 inches Max. Height: 400 mm/15. 75 inches Air Inlet: G1/4 Color: Blue Lifting Time: 5 Sec Working Temp: -60°C~ 50°C Package Content 1 x Pneumatic Jack 1 x Pneumatic Jack.

Performance Tool W1606: Floor Jack, Trolley, 2-ton Capacity, Steel, Yellow, 13. 00 in. Maximum Lift Height, Each – Need a lift? Performance Tool trolley floor jacks are great! With a 360 degree swivel steel lifting saddle, these steel trolley floor jacks can surely give you a hand in the garage.

Give your automotive maintenance a boost with Performance Tool trolley floor jacks.

Larin 2-1/2 Ton Floor Jack with Plastic Case is designed with precision hydraulics for steady lift and steel casters for longevity. Virtually every area is strengthened to give this great tool the capacity to easily perform its demanding proof load test.

It features a precision internal valve for even release and swiveling rear casters, as well as a lift range of 5-1/4″ to 15-1/2″. The jack has an extra heavy gauge steel chassis frame and rotatable forged saddle for easy positioning.

Heavy duty construction ensures durability. For over 20 years, Larin Corporation has been making significant improvements in automotive and hardware equipment and offers many innovations.

The Torin 2 1/2 Ton Low Profile Trolley Jack is a heavy-duty hydraulic jack featuring an arched frame design that gets underneath very low vehicles. Meets ASME PASE safety standards.

If youre looking for a heavy-duty jack that will perform consistently, look no further than the Sunex Tools 2 Ton Aluminum Service Jack. It features a thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability.

Made with Rapid Rise Technology, this improves raise speed by reaching max height of 19. 3 inches in just 7. 5 pumps. The wide track front wheels offer quick transport and positioning, while the side mounted handle make for easy jack positioning.

This lightweight 49-pound service jack designed for the track side racer or automotive enthusiast needing fast-acting performance. When you need a fast performing jack use the Sunex Tools 2 Ton Aluminum Service Jack.

Leave the heavy work to the Sunex Tools complete line of Lifting Equipment. Jacks, hoists, stands you name it! With low profiles and quick-lift technology, these jacks provide you with solutions that fit almost any application.

Double pump that increases lifting force and speed in 4 movements. Swivel rear wheels for easy handling. Safety valve that prevents overload. Extra low profile for easy and secure fit in low vehicles.

Low center of gravity for optimal stability during loading.

Get a lift the schwaben aluminum floor jack is a reliable way to lift vehicles so you can make repairs to handle maintenance work. Wide track front wheels help provide chassis torsion control and durability.

This floor jack’s angular positioned pump pistons provide effective pump stroke when completely under the jack is completely under the vehicle. Ball-bearing mounted rear swivel caster wheels make moving this jack from vehicle to vehicle easy.

Minimum Lift Height, 19. 3 in. Maximum Lift Height – Our Summit aluminum hydraulic floor jacks are made of strong, lightweight aluminum, but their lifting capacity is anything but lightweight. These jacks have been tested to meet ASME PASE-2014 and ANSI Z535 safety standards.

They feature a rapid-rise low-profile front roller for quick, accurate placement and have a rotating rubber saddle pad to prevent marring.