Best Finishing Badges For Big Man 2K21 (2024 Updated)

This emblem really stands out. Simple to install, great build quality. My only con is that the instructions are for older trucks, the disassembly of the grill is fine but the wiring is different for 2021 and newer.

My truck comes a slightly different fuse box and the instructions wants you to tap into fuse 18. That fuse doesn’t exist in the box. So after researching for a couple of hours, there are two choices.

Tap into fuse 22, which is a power steering fuse, and the emblem turns on with the ignition on or tap into a drl wire so it turns on with the drls (which is what i wanna do later on). No faults so far.

Installed on my 2020 Iconic Silver F150 Limited. Ok here are two important things you need to know: #1. Product description says easy 10 minute plug and play installation, which is far from the truth, at least on a 2020 Limited.

You literally have to remove the entire front of the truck just to get to the emblem. I’ve done many projects on previous F150’s and have the right tools and knowledge to accomplish just about any project, and it still took me over 4 hours to install.

The main issue was the fact of not knowing exactly where all of the many clips are hidden, therefore it was a tedious trial and error process pulling and yanking on the different parts that had to be removed from my brand new truck.

If I were to do it a second time, it’d probably only take 1-2 hours. #2. The instructions have you to wire it to the ignition/ starter fuse, therefore you don’t have the option to ever turn it off. There’s also no way to dim it if you want to.

The LED intensity is great for a sunshiny day but is way too bright at night. It literally looks like a third headlight! I’m very picky and couldn’t live with it being that bright so I got online and found the perfect inline wireless remote controlled module that enables it to be dimmed and also has several awesome modes for flashing, pulsing etc.

I freaking love love love it now and get compliments all the time. I Hope my testimony is helpful for those of you trying to decide whether to buy it or not. I say go for it! ??.

The front end had to be removed just to get to the emblem. The light is extremely bright and there’s no way to dim it if you want to. They are great for a sunshiny day but is too bright at night. It looks amost like a third headlight.

Wish they made it where you could dim the LED with a dimmer switch without it sizzling and it having to be turned all the way up (bright) or all the way down which is (off). If anyone know of a way to make it work with dimmer switch please post.

The website listed this product as ‘Clear’ plastic. It actually appears to be opaque vinyl. I wanted clear plastic. The website needs to be updated to say opaque vinyl to more accurately reflect what the product is and what the customer can expect upon receipt.

I’ll use it, but disappointed I didn’t get what I expected.

The pin/clip fastener is nice because it gives users a choice of how to attach it to their garments; it can even be rotated with a little wiggling. The badgeholders were sturdy and held up well during our event, and held a business-card-sized badge securely without being too challenging to slide it in.

The plastic is slightly textured and thus not 100% clear, but the badges were still easily readable through it. My only complaint is that these don’t seem to be available without the inserts. Our event used professionally-printed badges, so the included inserts were just filler for our purposes.

It would have been nice to be able to buy only the parts we needed.

These badges are sturdy enough for my purposes: use once or twice a month for meetings. For daily use, you might want to choose sturdier name badges. I would have appreciated an extra sheet of or two of the paper inserts.

All in all, a good buy, though.

Nice quality product and very helpful sales staff, however, the spacing of the flight badge and corps device above the ribbon rack was too spread out and crowded the laser engraving at the top of the plaque.

There should have been more space above the flight wings and less space between the corps device ,wings and ribbon rack.

Product looks great and great customer service! Recieved fast delivery and would highly recommend ordering from USAMM.

Very proud to wear. Absolute perfection

I ordered these to replace my father’s broken retirement case that got broken. He retired in 1987. Most everything I order was correct. The Air Force Stitch on name tags I ordered had dark blue Background as the picture.

But I end up receiving camouflage name tags instead which are the current Air Force tags. The picture was clearly blue but I got camoflauge. The customer service person said that was all that they had.

I rather got nothing than something that I didn’t ordered. I had to get the name tags from somewhere else. So I feel I wasted my money on something I didn’t ordered. Besides that, the rest of the order was fine.

They should remove the dark name tags for Air Force of their website if they do not carry those anymore.

The box turned out exactly how I wanted it. The attention to details is greatly appreciated. It is a nice tribute to my Dad, a retired Air Force pilot who is now deceased. I appreciate your hard work to make this look really nice, Thank you.

I purchased a rack and medals for my Father. The process of identifying the ribbons and their catalog descriptions was a special time of honoring my dad. His smile was a mile wide when he put on his hat! He even took the list of ribbons and carries it in his wallet!.

I really like the patch. I also like the size of the patch because I can put it in my Shadow Box. I also like the flight wings although I thought they would have been smaller. The DFC Pin will be placed on my VFW Cap.

I also want and Air Medal and Bronze Star Pin to place on my cap. Thanks again.

The Miniature Command Pilot wings were great. However, I mistook miniature for lapel size. I need a lapel size…one inch wide…Command Pilot lapel wing. Do you have this in stock? Walt Linne

Your Military Uniform is more than colored cloth. It represents that you, those before you, and now serving have chosen to protect this Nation and it’s citizens from their domestic and foreign enemies.

Above your left pocket for all to see are the awards received for your bravery and service. The Army Senior Aircrew Badge provided by Medals of America to replace the one earned long ago is second to none other company It truly is of the highest quality to compliment you and your service.

I bought this hoping that i wouldn’t have to sew on any more merit badges or find somebody to do it for. I love this stuff. All i did was put the badge down on the paper and trace it, cut it out. The only thing that sucks about this stuff is it is hard to peel the backing and front apart so that you can stick that badge to it.

once the backing is off, simply put the badge where you want it and press down with a spoon or something to that aspect. I highly recommend Badge Magic especially if you have a Cub Scout or Boy Scout in the family.

No more sewing.

Found this product a few years ago and it is a lifesaver! It is easy to use and holds up to washing and wear! Havent Had a single patch fall off yet! I highly recommend this product!

Badge Magic is definitely better than trying to sew or iron badges on. However, getting “stars” to completely stick is very difficult, because it’s hard to cut out the “points of the stars”.

It cane with the alcohol wipes and very easy to fit on. Looks really nice. I recommend it. Thank you for sending it so quickly too. Much appreciated

I wanted this item since my Range Rover has the black pack fitted. It was a genuine part, a perfect fit and easy to replace the old one. Thankyou!

This is the second I have purchased after changing my front badge I changed the rear It seems good quality

I am part of the Buscaderos. A group of cowboys and cowgirls keeping the spirit of the old west alive in Prescott Arizona. We spend weekends, parades, and other special times walking the courthouse square in downtown Prescott.

The young kids love to take a picture with the cowboys and get a badge to take home. The metal badges cost a little more, but they look better and are safer to pin on the kids. A small price to pay to bring a smile to a kid’s face.

So glad I decided to purchase these Sheriff’s Badges along with the straw Cowboy Hats. Really was the perfect touch for the kid’s cowboy-themed birthday party!

They had everything I needed and helped when I accidentally bought two of the same medals!

great product and service thanks buy from them

well pleased with everything. thanks

The emblem is actually really good. Have washed the car numerous times and it has stayed on. I ordered x2 just in case one day the letters fall off but all is good so far. The hardest part of the installation was to take off the original silver Dual Motor.

Once this was done then its a simple stick on with the new Matt Black one. I highly recommend this as with our December 2021 M3P everything is blacked out so it looks hot.

Decided to go with chrome Performance Emblem and matte black Dual Motor Emblem, while keeping the original “T” emblem and am very happy with the result. Installation was relatively simple for both emblems and both seem to be of high quality.

Great value and customer service from a great company. Would definitely recommend and would definitely order from Abstract Ocean again.

Got this emblem to replace the tailgate emblem on my 2003 Ford F-250 SuperDuty. I can’t figure out why Ford made the rear emblem different from the front fender emblems. Mine is a Lariat, and the fender emblems have a red background on the part where it says ‘Lariat’.

However, on the tailgate, the Lariat part is totally missing,and all it says is ‘Ford F-250 SuperDuty. So, I removed the original emblem, and put a matching fender emblem on the tailgate. You will, however, have to cut off one of the locating pins to get the emblem to sit straight, otherwise it’s crooked.

It’s chimp simple to do. Before actually attaching the emblem, put it on there, see which end is high, and cut that pin right off and remove the backing paper and stick it on the tailgate. It ain’t coming off, and it looks a whole lot nicer as it matches the other emblems.

These are exactly like the factory part. They ARE factory parts. Perfect look and fit.

Using OEM emblems is the only way to go, bought aftermarket only lasted a year faded and put of it fell off. Waste of Money.

Finish on the badge is excellent. Since my first job in the Air Force was in Base Fuels i wear it on my hats with pride.

VERY pleased! The Medal was reasonably priced and I received it immediately. Definitely recommend them and will certainly use them again for any future needs.

Received fast, beautiful, well made.

This was my first purchase with Auto Parts Cheaper. As promised OEM factory parts, in original packaging. Far cheaper than the dealership. Order arrived in 2 days with standard shipping, a day earlier than estimated.

Completely happy with my experience with them, and will be the first place I look the next time parts are needed. I have already recommended them to friends.

It’s an oem part so you know it’s good the trick is make sure you get off all of the old adhesive Before You Stick the new one on. Also warm the new one up in the sun before you install it.

The emblem was an exact fit. Identical to the original. Great Value.

title says it all. did not fit my truck. the mounting tabs were not placed correctly to fit my original chrome ‘ housing’ where my OEM Ford emblem fit. I expected all these ford parts to fit. had to cut and grind with dremel tool to make it work.

Merry Christmas.

Shipping took longer than originally estimated. The price was a bit high, but the chrspezt I could find. Overall, I’m not gusing but satisfied.

The advertisement said it fits a 2011 Ford F-150 with backup camera this is not true. It fits end to end not top and bottom it does not clip into the mount had to go buy double stick tape to make in stay on.

Because of time going to the post office , I didnt return , product was well package and new , but it never fitted ,the top and button hocks was to big for those in car, so Im now stuck with something I was all excited for and cant use it.

Disappointed. My car is a 2015 Nissan Sentra.

I lost my emblem in a fender bender and found the replacement in A Z Auto parts. Perfect fit, great price, quick shipping. I am a satisfied customer. I highly recommend.

fast shipment and fit my bumper grill perfectly

This is not fit to my vehicle on the front this is a different size it fit only to the trunk . Beside is very bad quality

Fair price. But does not fit perfectly.

All positive about the quality of the part and quickness in which I received it.

It the authentic part, looks good. I thought there was one per pack so I ordered two. Now I have an extra set, oh well.

Highly recommend this emblem. High quality material and easy to install. Looks every bit as if it was installed at the factory.

Its good but the only thing I found was that the sticky tape does not go to the end of the badge so I put on some more to make the badge stick better

You’re the best! Thanks for all the help. My sis said my 96 year old Dad / WWll, Korean War & POW, cried when he saw the Shadow Box. He couldn’t call to thank me until he composed himself. cheers

Well made, well polished. Does retain fingerprints, but wipes off easily. Pin is sharp enough to pierce through my tough material uniform shirt. Engraving looks great. No visible errors. I’ve had it for about a month to month and a half and no visible wear & tear.

Still looks brand new.

Excellently made. Received the matte type and it feels sturdy, solid and durable. Looks sharp, vivid and easy on the eye. Excellent product.

Same exact Nameplate as previously purchased at GALLS with the exception this one is in Gold. The previous ‘Silver’ worked just fine for 5 years. (Very little wear & tear!) This time I accepted the ‘Promotion’.

great item for my 2017 rzr. needed 2 rear brake calipers to be dot aproved by Michigan law. I did the conversion myself. this is the only caliper I found that would work.

Same as the title of review – was whatwas needed and glad to have fopund it here. Thanks!

This was a great buy and no issues or problems. I would recommend these guys and their products. Fit my Raptor 600 perfectly.