18 Best Extruder For 3D Printer (2023 Updated)

Amazing deal and worked flawlessly

Could not get a good print

Well made and a step up from my original extruder

Beautiful machine. The slicing software is user-friendly, quite easy to use. The cloud printing function is great. I saved my file in the software and sent it to the target machine when it is available.

A camera is built in the machine, which allows me to check the printing status remotely on my computer I ran it through a series of test prints to try and fine tune the setting. It was feeding well. It prints well at a lower temp, like 200℃ on the hot end.

Good adhesion to the build plate. Just slightly bend the plate to take off the objects. The machine nearly no needs to do setting operation! The defaulted parameter setting is ideal. Compared with the off-brand 3D printer I bought 3 years ago that needs manual leveling on and on, this machine makes it quite easy!.

I used one for a month or so. It is really a nice printer to learn 3d printing, great for a starter. I had a few email exchanges with the official support, and they are also very responsive. Original filament was not available in Switzerland so I used EasyPLA which also fits to its case.

I think the main problem is if you are interested in 3d printing, you probably will want to have a printer with a bit larger build volume and something that can be modified/customized/upgraded/fixed easily, so probably a more open design.

This is the key question you need to answer when buying this printer.

This printer is a mixed bag ,it is consumer friendly and setup is quite easy and the print results are very nice. Where this printer is lacking is in the customisation of its software and adaptability with other 3D print software.

Its more designed for wifi printing rather than connecting your computer to it which will put some people off. Its great as a beginner 3D printer but you will outgrow it if you suddenly take to all things 3D.

Possibly not a great value printer but its quiet and looks great anywhere in the house.

spent a lot of time researching and following and listening to several u tubers I choose the MakerBot brand. If I had a place to set up in a non- living space or vent to outside I may have gone with a heated bed in order to use ABS, however, PLA has worked well for my needs.

Build platform is removable and so far large enough (get the biggest you can afford). The control panel/menu options are easy to follow. one con is it is quite loud you hear a lot of motor and squealing noises during the print process.

easy to pause print cycle and change filament color and restart the project. Printer frame is solid and unaffected by the moving print head. The light has a blue hue and is hard to see the progress at times and identify a failing print process.

I did have to update the firmware. I have the printer connected via USB cable so I can’t comment on the wireless feature. some prints have taken 9 hours or more and have run back to back print cycles I did have to remove the filament and reinstall because the head lost its grip never was able to identify the reason.

Happy with my selection, I would do it again.

They run the thingiverse website and are fumbling it. Uploaded something today just for it to fall off the face of the planet. Not in my designs, not searchable. You can’t even get to it unless you have a direct link to it.

So I looked up the problem and sure enough, multiple other people are having the same issue with NO resolution for YEARS and NO response from customer support. I wonder how many other designs are lost in the abyss without their creator even knowing.

With how bad they are mismanaging thingiverse, I can’t even imagine how error prone their printers would be. Hope they fold so someone more responsible can take on the stewardship of thingiverse.

Top quality 3D Printer at a good price. The printer was easy to set-up and the first parts came out great. All the parts that I have printed are precise and fine detail given the accuracy of the printer.

Purchased after a few weeks in my College course Intro. to 3D Printing. The extruder nozzle is one of a kind and has some great features to it. MakerBot through Stratasys is a top company involved in 3D printing.

Great buy through Dell to earn rewards points.

This upgrade has made a huge difference to the quality of my prints on several levels. The quality of the components themselves are an improvement on the stock Ender 5. Installing these myself means that I know understand what is happening inside the hotend.

Finally, it has forced me to understand calibrating extruder flow, PID calibration and where the Ender 5 EPROM data is stored and the need to ensure the TF card is inserted before powering up my 3D printer.

Only saying like it as have not had it long enough. I think it may become a love it product but too early to say, lovely quality construction and an easy installation. Print so far are perfect. Heavily reduced the retraction and no stringing.

Thus far I love this.

TranslateShow in original languageAuspacken, Druckkopf montieren, geht. Steht aktuell im Dauereinsatz für ein gröberes Halloweenprojekt und verrichtet seinen Dienst ordnungsgemäss. Der zusammenbau (Druckkopf montieren, Haube aufsetzen) geht flott, das nivellieren der Druckplatte ist ebenfalls schnell gemacht.

(ja das muss von Hand gemacht werden, ist keine Hexerei) Die bestehende Rollenhalterung ist so naja. das Filament hat sich mal über den Rand der Rolle geschoben, sich dann um den Halter gewickelt und ist dann gerissen.

Ist kein Beinbruch, gibt genug Lösungen bei Thingiverse um die Rollen anderweitig zu platzieren 😉 Ein Vorteil ist der Dualextruder, ein ständiges Wechseln der Rollen entfällt. Die Bedienung ist einfach und erfolgt über das Steuerkreuz an der Frontseite des Druckes.

Ein weiterer Vorteil ist das der Drucker Standalone über die mitgelieferte SD Karte betrieben werden kann. Somit muss der Drucker nicht permanent mit dem USB Kabel verbunden sein und kann abgesetzt im Hobbyraum verfrachtet werden.

Die Geräuschentwicklung unterscheidet sich je nach der Form des zu druckenden Objektes und deren Druckauflösung von normal bis eher laut. Mich persönlich stört das nicht, der Drucker steht im Keller und dümpelt vor sich hin.

TranslateShow in original languageDies ist mein erster 3D Drucker und ich bin sehr zufrieden. Durch die Dual Extruder sind sogar Zweifarbige Drucke möglich. Dies braucht zwar ein bisschen Einstellungsarbeit aber es klappt und eröffnet nochmals mehr Möglichkeiten.

Sicher gibt es schnellere oder bessere Geräte aber für den Preis ist es schwer was besseres zu finden. Durch die Konstruktion mit mitfahrender Z Achse der Druckplatte leidet die Stabilität halt ein wenig was sich bei schnellem Druck oder hohen Bauteilen Negativ auswirken kann.

Auch die mitgelieferte Software hat extrem viele Einstell Möglichkeiten. Der Slicer lässt so gut wie alles einstellen wenn man im entsprechenden Expertenmodus ist. Würde ich wieder kaufen.

TranslateShow in original languageMit wenigen Handgriffen und einfacher Kalibrierung sofort betriebsfhig. Sehr gute Software. Erlaubt wirklich 2 unterschiedliche Filamente gleichzeitig zu drucken, weil wirklich 2 unabhngige Extruder.

So kann z. B. die Sttzstruktur aus HIPS und das Modell aus ABS gedruckt werden oder das ABS Modell kann mit leitfhigem Filament bedruckt werden. Sehr gut fr Modellbauer die funktionale Modelle drucken.

I purchased it about a year ago and basically it is a very expensive paperweight! I’ve watched countless videos and read the very minimal instruction manual and yet have not been able to make anything but the one test piece! Every time I think I’ll give it another try it starts the project I put in but craps out halfway through the program! It says it’s user friendly right out of the box but albeit I am very much a novice but i did not agree with that! I had big hopes for this device only to regret buying it.

It is worth noting that in the complete set from the manufacturer there is no stylish suitcase for the tool and spare nozzles. Also there was no glue, although it is listed on the website. Printing from the box with a regular slider with default settings was successful from the first time without any problems.

I did not apply glue to the surface, printed with a backing-it sticks perfectly. After cooling, the model can be moved without problems. I bought at a discount 599 so for the price is really good printer.

Excellent thing, works from box. blue and white PLA were included. I have just some small issues – left nozzle is a little lower than right nozzle and scratches the previous layers on the left side of plate.

Wii-fi connection to access point sometimes does not work without restart, but it seems to me that it is firmware problems and may be fixed soon. It is very comfortable to print via Wi-Fi (printer is connected to wi-fi router).

There is another extruder feeder sold under SKU 135723, which is missing the bowden coupling. I can confirm that THIS product included all the necessary parts and works great with the Ender 3 Pro as an upgrade over the stock feeder.

Very confusing having two near-identical products but I hope this helps.

This was the first real upgrade I got for my ender 3 and replace the plastic parts with all metal parts is basically essential if you are wanting to print for a long time. The installation is easy, I didn’t need any instructions, it’s essentially the exact same as the original extruder assembly just all metal.

The Creator 3 has been an excellent addition to our shop and has been performing well under the rigorous demand it is working under. The IDEX system opens up a new world of possibilities that was not available with single extruders.

The machine/interface is streamlined and appears well-built as expected from flashforge. Additionally, the FFUSA support team has been a fantastic help with quick response times. I would recommend this for the more serious creators.

Not too many options out there for this size/capability of enclosed IDEX printer. Overall I’m satisfied with the purchase. I was having an issue with one of the extruders, and after reaching out to 3D Printer Haus they connected me to the Flashforge USA support team who were very helpful and were able to resolve the issue in a timely manner.

Pros: Prints out of the box. Good quality prints. Enclosed cabinetDouble extruderExcellent WiFi connection Cons: Doesn’t take a lot of 3rd party filament reels without modification (too wide)Print bed difficult to cleanLarge and heavy.

Product comes as shown in pictures and you only need to disconnect and reconnect wiring.

This product was exactly what my printer needed. I installed it in 30 seconds! Thank you Monoprice

Nickel 100%origine

idem a l’original

Impeccable