20 Best Esc For Drag Racing (2023 Updated)

1 Features 1. 1 Water-proof and dust-proof, suitable for all-weather condition races. 1. 2 Small size with built-in capacitor module. 1. 3 Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).

1. 4 Great current endurance capability. 1. 5 Great built-in BEC output capacity. 1. 6 Automatic throttle range calibration, easy to use. 1. 7 Easy to set the ESC parameters with jumpers. 1. 8 Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.

2 Specifications Model Wp-1625-BRUSHED Fwd. Cont. / Peak Current Rev. Cont. / Peak Current 25A /100A 25A /100A Voltage Range 2-3S Lipo or 5-9 NiMH Cars Applicable 1/18 &1/16: Touring Car, Buggy, Monster, Truggy Motor Limit * 2S Lipo or 6 NiMH 280、370 or 380 Size Motor RPM<30000 7="" 2v="" span=""> 3S Lipo or 9 NiMH 280、370 or 380 Size Motor RPM<20000 7="" 2v="" span=""> 4S Lipo or 12 NiMH Not Available Resistance Fwd 0.

003Ω, Rev 0. 003Ω BEC Output 1A/5V (Linear Mode) PWM Frequency 1KHz Dimension / Weight 34*24*14 / 23. 5g Cooling Fan Without cooling fan Running Modes Forward/Reverse/Brake *Note: WP-860-DUAL-BRUSHED has two outputs to drive 2 motors.

When driving 2 motors simultaneously, the Turns of the motors need to be increased.

1 Features 1. 1 High performance but low price, users can own this reliable race-ready ESc at an affordable cost. 1. 2 compact size, suitable for various car chassis. 1. 3 Auto identification system can recognize sensored/sensor less brushless motors automatically.

1. 4 Excellent operating feelings and plentiful adjustment options, suitable for most kinds of competitions. 1. 5 8 steps of timing adjustment greatly increase the output power of the motor and unlock its maximum potential.

1. 6 Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment. 1. 7 9 steps of acceleration (punch) adjustment, from “soft” to “very aggressive” to fit for different kinds of cars, tires and tracks.

1. 8 Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery/Over-heat protection/Throttle signal loss protection/Motor Lock-up protection. 1. 9 One-button (the “SET” button on the ESc) to set the ESc and easy to reset all parameters to the factory default settings.

1. 10 compatible with the optional device —- the portable Digital LED Program card, especially convenient for outdoor use.

Send it with Sidewinder The all new and improved Sidewinder 4 builds upon Castleu2019s most popular platform – the Sidewinder 3. The Sidewinder 4 is Castle’s first platform running Cryo-Drive technology which reduces operating temperatures in all applications.

Cryo-Drive is a potent combination of software enhancements and precision fluid dynamics. The new case is designed specifically for maximum airflow from the huge 30mm fan included with the Sidewinder 4.

These changes result in cooler ESC temperatures, increased runtime and power handling. All of these improvements mean you can gear more aggressively for more speed and harder/longer runs. And of course it is still waterproof and compatible with the optional Castle Link USB programmer.

The Sidewinder 4 is a versatile ESC that can be used in a wide variety of applications. It is available by itself our paired with Castle’s 4-pole brushless motors it can also be used in a rock crawling application with a brushed motor down t.

The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. The MAX6 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.

4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles. The MAX6 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

You can upgrade the MAX6 with the Hobby wing USB LINK software, a multifunction LCD programme box and a laptop. Hobby wing updates its ESC firmware regularly giving you upgraded features more often when available.

The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.

The MAX6 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).

This ESC is applicable to various 1/6th & 1/7th scale vehicles like the Traxxas XO-1, and also suitable to various 1/8th scale heavy vehicles like the CEN GST-E. It’s the ideal option for high-end aggressively powered builds.

The waterproof and dust-proof design allows the MAX5 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. The MAX5 has adopted the world’s first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.

4V. The high voltage BEC is designed to handle today’s high voltage servos on demand used by large scale vehicles. The MAX5 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

You can upgrade the MAX5 with the Hobby wing USB LINK software, a multifunction LCD programme box and a laptop. Hobby wing updates its ESC firmware regularly giving you upgraded features more often when available.

The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.

The MAX5 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).

The EZRUN MAX 5 provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T Nitro-to-Electric truck, and Desert Buggy XL Nitro-to-Electric buggy.

It’s also suitable for various other brand of 1/5th scale on-road cars, trudges, SCTs and buggies.

Vehicles: 1/16th, 1/18th touring cars/buggies/trucks/monster trucks Kev rating/T Count: 2S LiPo: 1/10th touring cars kv≤8000, 1/10th buggies kv≤5000; 3S LiPo: 1/10th touring cars kv≤5500, 1/10th buggies kv≤3500 (2435 motors) Cont.

/peak current: 30A/180A; input: 2-3s LiPo/6-9 Cells NiMH; beck output: linear mode:6V/1A Water-proof and dust-proof for all-weather races. Please make sure to uninstall the cooling fan before using this ESC in water Clean and dry it soon after the use for avoiding the connectors get rusty.

) Bottom Line External programming port, easy to connect to the LED Program Card (purchase separately) when setting the ESC Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment.

9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks. Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection.

One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings. Compatible with the optional device —- the portable Digital LED Program Card, especially convenient for outdoor use.

Risk Free a 180 days limited warranty in North America Specifications Model/SKU QUICRUN-WP-16BL30 / 30105030001 Cont. /Peak Current/ Resistance 30A/180A/0. 002Ω Motor Type Supported Sensorless Brushless Motor Car Applicable 1:18 & 1:16 On-road/Off-road/Buggy/Monster Motor Limit For 2S Lipo or 6 cells NiMH: 1.

On-road: 2435-size or smaller motor with the KV<8000 2. off-road>

Off-road/Buggy/Monster: 2435-size or smaller motor with the KV<3500 battery 4-9 cells nimh 2-3s lipo bec output 6v>

Fully waterproof design for all conditions. (Note: Please clean and dry it after use for avoiding rusty connectors). HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the aluminum heat sink for great heat dissipation.

Built-in switch-mode BEC with cont. current of 4A. Tunable drag brake and drag brake rate for different vehicles, tracks, and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel.

9 levels of acceleration/ punch from soft to aggressive for different vehicles, tires and tracks. Proportional brake with 9 levels of initial brake force, maximum brake force, and drag brake force. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection.

Separate programming port to easily connect the LED program card to the ESC. ESC programming via HOBBYWING LED Program Card.

Water-proof and dust-proof, suitable for all weather races. / Small size, with built-in capacitor module. 15 programmable parameter items PWM Frequency: 1K/2K/4K/8K/16K Adjustable Freewheeling (DEO) capability Drag brake rate in 9 levels (adjustable) Electronic switch / Aluminum case for great heat dissipation / Great current endurance capability.

/ Great built-in BEC output capacity. / Automatic throttle range calibration, easy to use. Multiple protections: Over Voltage Protection / Low voltage cut-off protection for battery / Over-heating protection / Throttle signal loss protection, and much more What’s in the box : ESC LED program card / Bonus accessories (heat sink, etc) / User’s manual / Decal QUICRUN WP1080 Waterproof Rock Crawler Brushed ESC, (2-3S) This powerful waterproof ESC from HobbyWing is specifically designed with rock crawlers and scale trucks in mind.

It features an aluminum case for better cooling under hard use, its small size will allow easy mounting options, and it is completely waterproof for adverse weather conditions. It features 15 programmable catagories includuing PWM and drag brake performance and can be easily tuned using the included LED program box.

This will allow you to fine tune the ESC to your drive style and braking performance to meet your demands. FEATURES: 100% Waterproof15 Programmable Parameter Items – Factory Installed XT60 Plug – Automatic Throttle Calibration for Ease of Use – Powerful BEC, 2S-3S Li – Po Capacity – LED Program Box for Easy Programmability – SPECIFICATIONS: Battery: 2-3S Li – Po or 5-9S Ni – Mh BEC Output: 6V / 7.

4V @ 3A (Switch Mode)Motor Limit 2S Li – Po: 10TMotor Limit 3S Li – Po: 16TSize mm: 36. 5(L)* 32(W)*18(H) (without fan)YOU WILL RECEIVE: Speed controller – LCD programming cardinstructionswire tiesdouble sided foam tapeheat shrinkdecal sheet.

Part number: HWI30125000 Hobbywing 30125000 Quicrun brushless Esc – 10bl120-Sensored. 1/10th scale 120A sensored brushless ESC. item UPC: 088718513128. inventory number: 90034. Always: Have fun enjoying your models.

The black edition XR10 stock Spec ESC features a smaller footprint and lighter weight than the older XERUN stock Spec. It is designed for stock (non-timing) racing with motors down to 13. 5T in off-road applications and 10.

5T motors in On-Road applications. It is designed for 2S use, but can operate with 3S power with the use of a high voltage fan.

Highest performance, smallest size, lightest weight – that is what the EMax Bullet 30 amp ESC offers. At a mere 3. 9g (nearly half the weight of the closest competitor), and measuring 11. 9 x 19. 6mm, this ESC is TINY.

This ESC is capable of running all major protocols, including DShot 600, 300, and 150, and Multishot, and Oneshot 42/125. It comes pre-loaded with BLHeli 16. 5, meaning you’re ready to run out of the box.

Features The market’s lightest and smallest ESC, designed specifically for high-level FPV racing. Utilizing the latest BLHeli-S firmware (16. 5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.

Supports new digital signal: DSHOT, and analog signals: MULTISHOT, ONESHOT42, ONESHOT125. Top quality MOSFET, ceramic capacitors. 3oz high TG PCB board, significantly improves heat dissipation and improves system efficiency.

New aluminum heat sink, offers protection from propeller strike damage. Features high-temperature silicone signal cable for wire flexibility and ease of installation. Specifications Con. Current: 30A Input Voltage: 2-4S Weight: 3g Includes 1x EMAX Bullet 2-4S DShot600 30A ESC.

The QuicRun series of HobbyWing contains brushed and brushless drive systems. In the case of the brushless systems, there are also sensorless as well as sensor-based drives, thus this series offers a suitable solution for every need.

The series is also very cost-effective and is aimed primarily at beginners and advanced pilots. It also convinces by the outstanding known quality of the Hobbywing products as well as by the uncomplicated commissioning.

This text is machine translated.

Water-proof and dust-proof,suitable for all weather races. Small size,with built-in capacitor module. 100% waterproof 15 programmable parameter items PWM frequency: 1K/2K/4K/8K/16K adjustable freewheeling (DEO) capability drag brake Rate in 9 levels (adjustable) electronic switch aluminum case for great heat dissipation great current endurance capability.

Great built-in BEC output capacity. Automatic throttle range calibration,easy to use. ESC LED program card bonus accessories (heat sink,etc) user’s manual decal.

XR10 PRO Stock Spec 1S Sensored Brushless ESCThe XR10 PRO Stock Spec 1S ESC is very light at only 28. 5g and features the super internal BEC with a maximum output of 6A and adjustable voltages between 6V and 7.

4V. This will allow the use of a variety of servos without the use of an external a receiver pack. The adjustable brake and PWM frequencies allow you to fine tune your ESC to suit your driving style and track conditions and is adjustable with the optional programmer card or the WiFi express module.

Specifications Cont. / Peak Current / Resistance: 60A / 380A / 0. 0008 Ohm Motor Type Supported: Sensored / Sensorless Brushless Motor Motor Limit: 4-6 cells NiMH/2S Lipo: 8. 5T(1/10 On-road), 13. 5T(1/10 Off-road) 8-9 cells NiMH/3S Lipo: 13.

5T(1/10 On-road), 17. 5T(1/10 Off-road) Battery: 4-9 cells NiMH, 2-3S Lipo BEC Output: [email protected] Compact size, suitable for various car chassis. Auto identification system can recognize sensored / sensorless brushless motors automatically.

Excellent operating feelings and plentiful adjustment options, suitable for most kinds of competitions. 8 steps of timing adjustment greatly increase the output power of the motor, and unlock its maximum potential.

Proportional brake with 4 steps of Maximum Brake Force adjustment, 8 steps of Drag Brake Force adjustment and 4 steps of Initial Brake Force adjustment. 9 steps of acceleration (punch) adjustment, from “soft” to “very aggressive” to fit for different kinds of cars, tires and tracks.

Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection / Motor Lock-up protection. One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.

This is the Hobbywing Platinum Pro V4 40A ESC, for use with 300-400 sized Helicopters. Innovative Heat Dissipation Structure The innovative “duo” stacking structure allows all components on both sides of the printed circuit boards to quickly conduct heat to the aluminum case.

Excellent Motor Speed Governing The high performance 32-bit processor, combined with advanced algorithm, makes the motor speed-governing excellent for different conditions. With the adjustable sensitivity of speed-governing, every pilot can find the most suitable settings for his helicopter.

Super Soft Start-Up The Platinum 40A makes the motor start extremely soft and avoids tail-drift issues. The start-up time is adjustable within 8 to 25 seconds. This will definitely create a perfect starting point for every flight.

Super BEC The built-in switch mode BEC with a continuously adjustable output voltage, range from 5V to 8V (steps 0. 1V). It is certain to put ou.

With the brushless systems there are also sensorless and sensor-based drives, so this series offers a suitable solution for every need. The series is also very affordable and is aimed primarily at beginners and advanced pilots.

It also convinces through the outstanding known quality of Hobbywing products as well as through the uncomplicated commissioning.

The AE-5 ESC features include 3S LiPo capability, adjustable drag brake and it’s waterproof! Settings can be easily switched in the field between LiPo and NiMH battery types with a simple jumper no more complex procedures! Jumper 1 provides a simple plug and play choice between LiPo or NiMH batteries Jumper 2 switches drag brake settings Waterproof design Includes Star style battery plug No on/off switch – power supplied by battery connection Laser etched heat sink* Always remember to disconnect the battery when vehicle is not in use.

Is specially designed for FPV Racing. Features fast computing speed. The T-Motors F35A 3-6S Brushless ESC is specially designed for FPV Racing. Imported industrial MOS and high-quality ceramic capacitor contribute to low internal resistance for low energy consumption, low heat high switching frequency of MOS and a stable circuit which helps react to the impact of motor speed at ease.

Compared with traditional MCU of 8 bit, the 32BIT stm32f051 main control chip enjoys the advantage of fast computing speed.

The T-Motor Velox V50A 4-In-1 is a high-performance ESC from one of the best manufacturers in the hobby. With higher quality MOSFETS, large solder pads, dioxygen heat sink with excellent heat dispersion, and more features, this is certainly a worthy upgrade.

Includes:1x T-Motor Velox V50A 32Bit 4-In-1 ESC1x XT60 Cable1x Capacitor4x Anti-Vibration Grommets1x Wiring Harness.