20 Best Dewalt Drill Bit Set (2023 Updated)

These were on sale at an excellent price, and I purchased several sets. While these bits appear to be of good quality, my experience is that often a single project is enough to ‘burn out’ masonry bits after a number of use cycles.

Patience is a virtue, and there are times when it’s a virtue I do not possess in abundance, so having good spares on hand is something I value. The sizes included cover many common tapcon and masonry anchor products.

I absolutely Love DeWalt Tools!! They are the Best, in my opinion. These drill bits are Awesome!! 😎 The tips do not break off (like some cheaper version wannabe DeWalt drill bits tend to do). They stay sharp longer which makes for a cleaner, more even cut.

Thus less splitting too!! I highly recommend DeWalts 14 pc pilot point titanium drill bit set!!.

They work, they help make holes, blah, blah. here’s what you really need to know: *** The small bits don’t snap! No breaky! *** I’ve been using the DW1163 and DW1354 sets for three years, and they’ve gotten much more use than any bits I’ve used in the past (new, big house, new, big projects).

With every other set of bits I’ve ever owned (probably really cheap bits, honestly), I’d snap one of the smallest bits in the first one or two uses. Every time. With the DeWalts, they just go and go.

pilots here, pilots there, drill, drill, drill, baby!.

Litterly use this for everything while converting my bus into a tiny home. It has saved me a lot of time and money. It’s easy to find the bright yellow box in a toolset when working. A lot less hassle.

Makes clean cut holes in no time at all. Also easy to use.

These drill bits cut wonderfully! That is. if you chuck them into a drill press or old-school keyed drill. The shanks are not beveled, which is virtually essential for a modern cordless drill when going into a tough substance like metal.

Eventually, the drill will out-torque itself and the bit will spin in the chuck instead of the material. I now use them in my cheap drill press, where they do great work.

I’ve owned other bit sets. Was hoping the DeWalt set would be better, but it’s pretty bad. 3 things I don’t like and pros vs cons at the end. 1) My other sets have a hinge so you can turn the bits outward and easily take them out and put them back.

This set is bad for taking them out or putting them back. 2) closing this thing sucks. It was misaligned when I got it, so I need to really press hard to line it up to close it. 3) bits themselves aren’t labeled.

While they will only fit in the correct place, they aren’t labeled. So if they get separated from the case you got to measure them to figure it out each time. Lame. Pros are that they were made of metal and came with all th sizes advertised.

Cons are that it’s a pretty cheap set and all my other sets are better put together. Annoying to use. Since I own 3 other sets and they are all better, I’d say this set is not good.

These are all razor sharp, nice! And are not ‘anti-slip’, which is also nice. The ‘anti-slip’ ones need to be carefully nestled into the chuck, that takes time. These just drop in and work. The case has a nice feature too, the bits individually flip forward before removing them.

Many sets have all the bits flop forward at the same time, making it more likely you will cut your finger trying to yank one bit free with your fingertips. These pop right out when commanded. And stay securely when pressed down.

I have had ‘Titanium’ bits that weren’t this sharp, even when new. And then the ‘Titanium’ coating comes off the cutting edge, exposing a very poor metal underneath. They were bad. Just get these. I’m very pleased.

and I have high expectations.

Like much if Dewalt, in recent years it’s quality has gone down, while it’s profits go up. At one time, I owned 30+ Dewalt tools and many more accessories. But as age (and the desire for a new tool) would have me purchasing new items, it became apparent that Dewalt had built up it’s name so high, that it could now focus on profits and cutting costs.

And sadly, their drill bits now, are no different. The pilot points were one of my favorite wood bits. It was quicker that a brad point, but also made a clean edge. Every now and then, by my error, I’d snap one.

(It happens. ) But with their recent batches, I noticed they’re a much softer metal. They no longer snap off when they bite. They bend. I’ve now tested several of them, as well as their black/gold. bits.

And in both, they bend super easily. Along with the softer metal, comes the issue of dulling much quicker All in all, Dewalt will be missed. Bit this was inevitable. Just sad to see it happen.

This set also comeswithout pilot points , so make sure that you get the right one for you. The pilot point is convenient because you don’t have to pre-drill. However, be aware that due to the pilot point, you can’t use these bits enlarge existing holes with them, or use them to countersink holes.

These bits are effectively flat at the front and won’t center in an existing hole. There are better tools for both of these tasks (step drills and countersinks, respectively), however in practice it’s convenient to be able to enlarge holes anyway, so you decide.

By the way, only 3/16″ and larger have pilot points. The bits from 1/16″ to 11/64″ are the same in both sets. A bit more on pilot holes and pilot points, in case you don’t know what I’m talking about: When you drill a hole in metal with a normal twist drill (one that doesn’t have a pilot point), you want to first drill a small hole – the “pilot hole” (usually about 1/8″) – and then enlarge it with a bigger bit.

For very large bits, you may even do 3 steps. The reason is that this gives you better centering, and it makes your bits last longer. It gives you better centering because smaller bits tend to “walk” less from your initial mark.

It makes them last longer because larger bits have a pretty wide “chisel” in the middle that doesn’t cut material but only displaces it, and the chisel is the first part to get hot and go dull. If you make a pilot hole, the chisel has much less work to do, and your bits will last longer.

It’s also much easier to drill this way especially if you’re not using a drill press, because it requires a lot less tool pressure. These bits have a “pilot point”, almost like a smaller drill bit sticking out of a larger bit.

So they do the pilot hole followed by the large hole, all in one. This makes drilling faster because you don’t have to change bits. However due to this you can’t use these bits to enlarge existing holes.

Normal bits have a cone shape in front, and will center in any hole that’s smaller. These only have a pilot point sticking out, and are otherwise flat. So they won’t center in the existing hole (unless the existing hole happens to be exactly the size of the pilot), but instead will move around and make a mess if you try to enlarge something.

Also, you won’t realistically be able to sharpen these – the geometry is too complicated.

After years of lost and a collection I have to dig through I saved time and $$ by just buying a complete set! Great quality and all in order! Thank you!

Dewalt is a renowned brand. This set is a wonderful addition to my tool assortment.

Great assortment of “project” tools. I already used some of these and they are the best!

These things FKY through anything they touch. It’s not even a comparison to other brands. Nothing touches these as far as speed, cleanliness of the hole, and durability. Dewalt proves to be king yet again.

Works great – very quick. Saw an online review/testing and this bit came out on top. Very happy. Drills through steel like butter! Highly recommend.

I will use these to drill the exact holes that I need in order to use grommets on my project. Having only three bits cover so many hole sizes is perfect for me. These are highly rated step drill bits.

What’s to say. They’re drill bits. They make holes. Not as sharp as I would like, but they cut through soft wood with little difficulty. I DO have some good advice though. NEVER buy drill bits that are rounded on the ends! Go hex all the way!! It’s darn near impossible to keep them from spinning in your drill no matter how hard you have them chucked down, especially when drilling into hard woods.

This is a great set for your wood/metal needs! It starts with a great hardcase that is easy to find in your toolbag and tough like the DeWalt powertool cases. Inside is a great selection of sizes and absolutely love the ‘spares’ in the case for smaller sizes you may break onsite.

The bits are great quality, like with any bit, the key to lasting is keeping RPMs at the appropriate level for what you’re drilling. Don’t run your bits at your drill’s max RPM!.

I bought this as a second set of frequently used bits so I wouldn’t need to tote my full sized drill index. I’ve used them a bunch since purchase (about 6 months). Only complaint is they need a little sharpening.

Out of the box they are OK but need for sharpening is evident especially in the larger sized bits. This is not a problem for me because I own a Drill Doctor (another great tool!). After sharpening they are great bits.

The case is wonderful. most of the time I have found inexpensive bit sets to come in flimsy cases. not this one. It can stand up to tossing in the tool bag, dropping on the floor, etc. I will be giving a couple of these sets as Christmas gifts.

Very well made. Only issue is the case . It is intended to be used as a stackable case with other dewalt bit cases so the lock doesn’t sit flush on the case very frustrating.

High quality drill bits. these are better than my last set. Also, the shipping was super fast. I had the drill bits within 24 hours of placing my order, and the shipping was FREE! This was my first time ordering from Zoro.

I am very impressed and I will definitely be purchasing from them again!.

I had purchased this Cobalt Drill Bit set for a project that required drilling ten, 3/8″ holes in 1/8″ thick metaI. I spent over an hour drilling one hole with only titanium coated bits so I ran out to Canadian Tire to pick these up which happened to be on sale.

I completed the rest of the holes in less than 2 hours. I highly recommend these bits if you are drilling into any metal and would purchase it again.

This is the best sucker alive. I’m glad they still make these ones. I love all of the flavors but this specifically is my favorite. Cheap, yummy, and full of horrible ingredients.

Good quality for price. Cobalt bits are usually quite expensive for a set. Used these to drill out exhaust flange bolts that I typically find miserable to drill out. Lube em up well, worked like a charm.

I love the way these bits cut when they are fresh out of the package. Clean and fast with little effort for the first few holes. I am finding their performance diminishes rapidly however. I find after the first few holes the bits tend to dull rapidly and take quite a bit of effort to continue cutting holes.

They will continue to work, however I find the initial edge wears very quickly and the bits need a lot of additional force to continue cutting holes. They are a decent bit , but I think DeWalt can do better for quality and longevity.

These are quality spade bits that complete the tasks well. Dewalt uses terms such as “extreme speed channel” and have a patented “extended life corner” that seem to be nice technology to have but I can’t speak to whether this technology works or is marketing.

Either way they cut nice and have a heavy duty quick change 1/4″ shank. They should last me a long time. The only negative I have is that they come in a vinyl type sleeve package that actually has a cancer causing chemical in it that is banned in California.

I would of preferred a hard plastic casing.

Held up well for non-conventional use. Used as a mini-auger to break up hard rocky ground. Wore out edges but expected in this usage.

This set has everything youll need for an impact driver. Ive had multiple sets before, but now this is the only one I grab out of my bag. Strong metal construction. I did add longer bits to the storage container.

But its perfect to hold whats most commonly used. Id like to give it 10 stars. Anyone complaining hasnt tried other bit sets. Convince of compact size. I couldnt have designed a better driver set. Great job DeWalt.

The DeWALT Flex Torq set I received is different then the one advertised in the Fingerhut catalog and online. On one side of the case that was sent to me, it has the 1/4, 5/16, 3/8, and the 1/4 inch extension- and the Phillips heads on one side of the case lid impact all in their own seperate holder.

On the bottom half of the case it has four torq sockets 1/16,” 3/8″, 1/2″ and 9/16″ and all of the various bits are in a plastic container, instead of their own separate stanchions. As far as the Quality it is naturally DeWALT.

SO it surpasses any other out there.

Bought this kit for the 3/8 drive impact sockets. The small bits and the non magnetic bit holder is just fluff. I plan on buying a few metric impacts to go in this kit along with the standards. The 3 sae nut drivers are useful along with the 1/4 to 3/8 adapter but the rest is just fluff.

If there was a magnetic bit holder for the small bits it would be golden. Another note, I changed the orientation of the bit holder,nut drivers and adapters so that when closed, it keeps the impact sockets in place a little better.

This product is well made and easy to use. The only problem I have is , when flipping you have to push FORWARD on the collar to release the bit, seems a bit contrary, should be able to PULL BACK on the collar to release, would make ease of operation easier.

Other than that the tool is excellent, good quality,and a good value. The big plus is the number of bits and counter bores you get in this package. I think Dewalt has a big winner here.

I had this Dewalt kit for many years and it has been used and abused and I figured I wouldn’t be able to find another, so I pleased when I seen this for sale. It’s a very durable kit and the shipping was fast.

Thank You!.

The Dewalt Drill Flip Kit makes fast work of perfectly countersinking #6, #8, or #10 woodscrews. I’ve used this product for years and it still works without fail each and every time…

The bits are what I ordered. However, the case is not what is pictured. The photo shows a vinyl case which each grouping [3] of bits hinged to the left. What I received is a case made of metal and there is no hinging on the groupings.

The bits do not hinge making it difficult in both knowing their size but also in the removal of the bits. It would be nice to deliver what you have pictured.

The drill bit set is great! But whomever designed the metal box needs their butt kicked. The case will slam closed on your fingers. UPDATE: Get the $15. 00 Huot Drill Bit Index on Home Essentials Direct! Made the switch and Dewalt shiet metal index is in the trash.

Happy days are here again!.

DeWalt pilot point drill bits are incredible for drilling thin metal. My 3/8″ cordless drill will easily power a 1/2″ bit through 1/8″ steel in one shot – no pre-drilling smaller holes. A real time saver.

Because of the grind they are difficult to sharpen, but they last a long time. This is my third set. My complaint is that DeWalt cheapened the index. It is very difficult to see the drill size on the back rows.

The larger drills are difficult to get in and out. This index is stamped, thin gauge sheet metal, of a different design than drill indexes have been since they began making them. Very difficult to use.

Dewault has very much become my brand of choice , and buying some new wood drill bits was no exception. They performed perfectly and effortlessly which really came as no surprise. And you get a nice little box / case to keep them in as well.

Great price and great quality. Nuff said.

Not impressed. Had to exchange product because one of the bits was bent on arrival. Pack was sealed so this is a lack of production quality control. Not the quality I expect from the DeWalt brand.

sorry to say but very poor quality. i needed this type of drill for intricate woodwork but found them to be running out of true. the wobble made it impossible to drill the correct size hole. took back to store and went through many packs to try to find full set that spun correctly.

eventually gave up a got refund. you dont expect this problem with a big brand like dewalt, could they have been “seconds”. seems a shame as the other reviews are much more positive.

So I’ve realized there are no wood-drilling bits in this set, and I’m wondering why? I’ve had to try and squeeze my wood bits in the case with the others so that I don’t have to carry two around. There’s no specific tool for cutting out larger holes either – of course you can just make do with the largest drill bits, but it’s something I’m used to seeing in cheaper sets of accessories not from the likes of DeWALT.

Besides these minor details, the most annoying thing, not mentioned anywhere, is the sizes of the bell saws included – which, by the way, was the main attraction for me. 99 times out of 100, I’m using a bell saw to drill into plasterboard and insert the housing for an electrical socket.

And guess what – the required size (67/68mm) for that job doesn’t seem to feature in this set. Big disappointment as it means I’m going to have to buy one separately; and it won’t fit in the handy carry case, plus I’ll be weighed down with other sizes of bell saw I’ll hardly need to use.

Unfortunately DeWalt are doing the same as everyone else cutting costs because consumers demand cheap, cheap doesn’t go with quality!! Forget cheap DeWalt and go back to when your tools did what they should do.

Hole saw shaft sheared off cutting into 25mm ply only 9 holes cut!!! The masonary bits have done about 20 holes each and are now dull. I’ve got some Bosch bits that are literally into their hundreds and are “keen” Sorry but can’t rate this kit very highly even the case is brittle and clips blooming hard work to open.

One word to describe this kit. [email protected]@ !! As a tradesman I expect my tools to do the job.

My first set was fine until the magnet came out of the bit holder. Staff were more than happy to replace. Used the new set to hang up a TV indoors and cleaned them with a dry brush afterwards to get the debris off and now the drill bits are rusty!.

Just received this product (April 2019 – US purchase) and want to update the posts regarding origin and case as there are several comments posted with different descriptions. The case is a heavy duty metal – no plastic parts at all.

This is a ‘skeleton’ case so you can see the bits and touch them without opening the case. I put the case upside down, sideways and every which way and shook it looking for the bits to fall out – not a single bit fell out of its slot.

Could not be more happier. This set is. Made in Germany.

Excellent bits, as expected. I cut up the retail packaging and hot glued the clear blister wrap to the metal box to reduce airflow. Then I stuck some ZRUST tabs inside to inhibit rusting. I like the starter tips, but I suspect that sharpening these bits when they get dull will be a challenge and a half.

This product exceeded my expectations. The ease of taking the bits out is remarkable as I was struggling with other competitors being extra tight and not having the design and technology used by Dewalt.

Unbeatable quality and functionality

Looks great. Lots of components

Great way to keep so many attachments together. Not bulky so easy to store especially when you don’t have a lot of room. Great quality and easy to use. My son’s and I wonder why we didn’t get this sooner.

Bought this with intentions of only using a couple things inside. But ended up using more than I thought. Bring it with to all my projects

I will say that this review isn’t about the product itself. This is about the case design that dewalt chooses to use. I own nothing but dewalt tools. I have been in various fields of construction for years and I own only dewalt tools.

Day in and day out they are reliable and I really have never had any manufacturing problems with them. All in all I love and depend on your tools. The only problem I have ever had is the design of the case when it comes to any of the bit sets.

I absolutely hate them. I personally own a set that has screw bits and drill bits in it and it is a constant struggle and aggravation to get a bit out with its design. Other brands (I will not name them) are designed to angle for easy access and they are awesome.

Dewalt products are unmatched in my opinion but the design of their bit cases are awful.