20 Best Cup Holder For Walker (2023 Updated)

I bought this cup holder to use on my Lifetime Yukon 116 because my kayak didn’t have a cup holder. I like being able to mount this right to the track on either side of my boat. The size is great, able to fit large water bottles.

Overall a great buy.

I bought the cup holder for my Old Town Next canoe. Just returned from a week on the Missouri River and it performed perfect! Holding my large hydro flask while rock and rolling down the River.

The Clicgear Cup Holder Plus sounded like just what I needed. The original cup holder was too tight for my insulated water bottle that I like to carry with me. The Cup Holder Plus has two wrap around arms that allow for larger bottles.

However, the arms are almost just as tight as the original. Also, on both cup holders, the distance from the arms to the base is too shallow for most water bottles and if it wasn’t for how tight the arms are, it would fall out frequently.

My water bottle isn’t that big, and I would think a lot of people would want a bigger cup holder for the larger insulated Yeti type cups, with arms that wrap higher up on the cup/bottle.

Good addition if you have a larger bottle. Quality is a little less that expected from Clicgear when you compare it to other accessories. Not a major issue and a good accessory to have for those long hot days.

Holds a big bottle, fits the buggy with no issues and generous size. Maybe a little pricey for what it is so one star less.

Somewhere on the course, I lost my bottle of water. Yep, you read that right, hit a bump and bounced right out. of course I totally didn’t see it. Otherwise, this held my Starbucks cup wonderfully. I think I’ll use the smaller one that came with my cart for the water bottles lol.

Helinox chairs are expensive enough, but are without the “comfort” extras most other camp chairs boast. The add on extra of the cup holder is almost a no brainer, if you have already forked out for a Helinox chair.

The good thing is they fit all Helinox chair models, so I can use it with both my Chair Zero and Sunset Chair. It concertinas down to pack up small and despite this, is large enough to fit a wide drink bottle and my camp mug or glass.

It also is deep enough to securely hold a wine glass, so an excellent and practical design. You will not regret this addition to any Helinox chair!.

Looks very sturdy. Was expecting a simple clip on design that could be fitted to either side of my Sunset chair but the design is such that it only fits on the right hand side since it fits by sliding the front chair leg through the front ‘leg’ and it retains in position once the rear part of the moulding rests on the rear leg.

Since the chair legs are not both angled the same, you can only fit it on the right hand side for it to remain level. It means it’s more secure once fitted than a simple clip on design but it can’t be removed unless you dismantle the chair leg and remove the seat fabric to slide it off.

Not a big problem though – just unexpected.

I have had my Helinox Chair One for almost two years. I love my chair but have always been frustrated that it doesn’t have a cup holder. Finally I found this one. Joy! The small detail is remembering to put it on the frame before putting on the chair cover itself.

I am not sure if it supposed to have two settings, one for a short cup and one for a taller one, but I can’t seem to keep the holder at the shorter size. Not a big deal but I did waste a bit of time trying to figure it out.

Overall I love my new cup holder.

You definitely want one, but I do not recommend buying two. It’s super cool to have your drink handy while you’re out paddling! Pick up you choose is important because not all cups fit and certain cups that do fit end up sitting too tall and they interrupt your natural stroke of the paddle.

12 oz aluminum cans fit great and my favorite cup by far is the yeti 20 oz tumbler because it sits perfectly in the cup holder and keeps a low profile. The yeti 18 Oz fits very well but starts to get too tall.

The 26 oz yeti does not fit at all! The 30 oz cup with the slim bottom would probably also fit but I didn’t have one to test and I guess it’s too tall and you’re going to hit it with your paddle stroke a lot to the point that it will become annoying.

I have no idea why they put a slot for a cup handle to fit in a hot cup of coffee or cocoa is the last thing on my mind when paddling. the notch that they cut out has very sharp edges and they poke into your legs as you paddle.

Having two of them is like having a cactus on each side of you and greatly reduces the pleasure of paddling. Ideally the cup holder would be mounted 5 in further forward to get out of the stroke.

I installed this in a small Oldsmobile sedan. I pulled the liners out and screwed it to the floor, covering the screws then with the liners. Held my drinks secure! I think that any place that needs cup holders could use this.

I may end up buying more to put on my pontoon! Get creative!.

Arrived in timely manner and fits perfectly!!! Great price. No more messy console!!! Installed in 2007 Chevrolet Avalanche

This cup holder is fantastic. Fits perfectly. Easy installation, just snaps in. Wish I would have found this one first before spending money on 2 other ones from auto stores that did not work!

I bought two for replacements for my worn out old original holders. both my originals bottom pins had been broken out due to my down rigger side load on them. Two things stand out. its top diameter is a little bigger so it covers all the old attachment holes that the other standard new rod holders would not cover up or match to.

and the quality. these things are solid. thick high quality parts that could withstand a nuclear blast with a high polish. I’ve high speed trolled for wahoo and they took all that load and could taken a whole lot more.

Great product. so I bought 4 more and replaced all 6 of my standards with these. Oh. and it keeps my beer where i need it :).

It is what it is. It’s an $80-$90 cup & rod holder. You can’t see from the ad, or pictures but the quality is outstanding. Thick and heavy it’s constructed from 316 Stainless, which is an extremely high grade stainless, used in many marine applications.

I cringe at spending the money but I need steel for this because I’m going to use the Get-A-Grip Boarding Handle with it, to help skiers climb up the swim platform and into the boat, and I think you want steel for that application.

They come in plastic though. The 316 stainless doesn’t rust. These things should last forever!!!.

Replaced my bow drink holders on my sea hunt with these combo systems. Tried the 15 degree first but the bow flare was too much. The 30 fit perfect. These were a blind install and I purchased the horse shoe backer which made fitting the holder in the slightly bigger hole perfectly snug and overall installation was a breeze.

A little tough on the wallet but close your eyes and press the buy button – it’s for your boat! These are built solid, look and work great and well with the price.

I love the vista stroller and have zero complaints about it! It has the best features I could go on and on about. But this snack tray attachment is not great. It sits way too high up for my 8 month old.

He will be able to use it when he’s older and bigger but now is the time I need a snack tray so he can be happy in his stroller when he’s cranky and I need him to be quiet while I run errands! He can’t reach the tray and it’s weird how it sits so high.

I’m not a fan and it’s definitely expensive for what it is. But I’m keeping it because I will obviously need it eventually. Just so unfortunate I can’t use it now.

This tray looks good and works as intended. However, it comes up really high! I think it might be better for older kids. My 13 month old is 98% for height, and the edge of this comes basically up to his eye line.

He has to reach up to get anything from the tray and it obstructs his view. I really wish the height was adjustable.

So far I’ve had 2 of these bags. The first one was PERFECT! The 2nd one the straps were a little too short and they barely meet the velcro. This reduces the amount of weight the bag can carry. I’m still ordering 2 new ones and hoping the length of the straps will be the same as the first bag I had!! I love the “roominess” of the bag and with the longer straps, I can even carry a book along with everything else! I didn’t see colored bags available when I bought my 1st two bags, only black.

I love the colored prints! I’m ordering one of each color!.

The front pockets are convenient for cell phone, travel coffee mug, water bottle and pen & paper. I especially like the big zippered pocket. It holds 2 – 3 ice packs or any bulky items to easily transport from room to room.

This is a must have for anyone and everyone that is using a walker. It is making the rehab from my injury much more manageable.

Sometimes it’s so difficult to see from a picture if an item is going to work for you. I decided to go for it! After I received it I felt just awful because I knew it wouldn’t work for me! I emailed customer service and asked how to exchange the item.

later I checked my email and there was a refund. I was stunned and grateful. I just had a stroke and knew exchanging it would be difficult! Let me be clear this is a great product!!! I love the pattern, pockets, zipper and the pattern.

My recovery is just going faster than expected and I need something that will grow as I grow! Thanks so much!.

This car cup organizer is absolutely adorable and very functional. I was just about to add this to my cart until I saw the price. $22? Seriously? What does this cost to make, $2 or $3 dollars? I love practically everything Natural Life has and find the prices are usually really good, but every now and then, I see what I think is a ridiculous cost of an item.

I just wanted to comment on an example of one. I wonder does the seller think consumers don’t notice this stuff? I know people still buy it, but it is seriously overpriced. To end on a positive note, the car cup organizer IS adorable and functional, and if it goes on sale (a big one) I would love to put it in my car , just like I’d like to add every piece of Natural Life clothing to my wardrobe!.

This gorgeous little car cup holder is an absolute must have for me! The material is excellent quality and it holds many smaller items that get lost in my car. I keep 3 pairs of glasses, keys, pens, receipts, my iPhone and more in mine and it helps to keep my car tidy.

I love looking at it because the colors are vibrant and cheerful which is always fun. I highly recommend this car cup organizer and they make an awesome gift that’s not too expensive either! Get it! You will LOVE it!.

You simply must purchase to accompany your steering wheel cover, your air fresheners your crystal, coasters, garbage can and even the cool tissues!! All of Natural Life’s coolest quality items. My car feels happy inside!!! It makes everyone happy! I forgot check out their car plate holder.

How cool is that??? Love love them all!! It holds my phone, garage opener, sun glasses, lip gloss, perfume roller plus room for more. ✌☮.

I love the grippy material inside the potion that wraps around the cup. It really stays in place, even when everything gets wet from our messy baby. I’ll definitely be getting more for other things, like toys and tethers.

Very flexible on length of tether, size of cup/toy, and size of item being anchored to. We’ve used this a lot for tethering a sippy cup to the stroller so our baby can take drinks whenever he wants & we aren’t constantly trying to make sure a cup isn’t launched off into the street.

This BooginHead SippiGrip sippy cup holder is versatile! I thought it was short because my son’s high chair is literally high. I love that he could still drink properly while the sippy cup was being hooked into this holder.

However, the non-spill cup still spills water if turned upside down while hanging under the chair, sometimes I have to remove the sippy cup. Now that my son loves to watch youtube on the iPad and even if it has childproof case I still don’t want it to fall from the high chair so I tried to use it on the case and it works! Truly versatile! It can hold any toys, sippy cups and teethers.

The strap that holds the cup in place is anti-slip and it’s adjustable. My baby couldn’t open the velcro strap no matter how much he tried. Thanks to this new innovation. I highly recommend it!.

This is a really great idea! I was excited to try this since my toddler is a fan of throwing his cup. While we are working on that, I needed something that would keep his cups within arms reach instead of on the ground when we are using the stroller, for example.

I was hopeful, yet skeptical because the pacifier clips work out good, but I wasn’t sure about a strap tight enough to go around a sippy cup, perhaps of different sizes. The inside of the band is great because it’s a gripping sort of leather-ish material.

It fits several cups of shapes and sizes perfectly! I love this! I would recommend!.

I have nothing but good things to say about the Vater drink holder. I can mount it to any part of my mic stand and anywhere on my Hercules guitar stand! The adjustable clamp not only adapts to almost any size diameter but also allows you to level the cup holder while mounting it to any almost any angle.

Brilliant! This unit is well designed and very well built. It is made of metal with a clamp of high-impact plastic. The cup is sized to accept bootles, cans and standard beer glasses. You can also use it to hold a glass coffee cup with handle if placed at a slight angle (your mileage may vary avccording to the sixe and shape, though).

For drummers the cup rings out with a bell-like quality when struck so it can be a musical as as well as a practical accessory. I own two myself and gave a way a number of these to friends for Christmas.

I love this product!.

All right, you’re already reading reviews on drink holders so you already recognize the massively huge utilitarian value they bring to a musician and just want the straight scoop on this particular product compared to others.

But in case you’ve not recognized their utilitarian value, below is a short test to determine if a drink holder is right for you. Step 1: has any receptacle filled with any form of liquid ever been placed on top of your amp, cab, monitor, or on the floor next to speaker cables, guitar cables, or power cables? If the answer is yes, your test is complete: you will benefit from a drink holder.

If the answer is no, then the only place you’ve ever played is your living room and you probably don’t need this product. Ok, on to the straight scoop. I did a lot of searching and review reviewing before settling on the Vater cup.

I’m very pleased with this purchase. Of upmost value to me was something that would attach firmly, and would hold a varied assortment of cup/bottle sizes. The Vater met and exceeded both of these requirements for me.

The Vater holder is made by a company that for the most part, caters to drummers. As a result, their stuff is built to withstand vibrations and banging. The Vater drink holder uses a two sided clamp (think of the hands on a legoman figure), which are both tied into a wingnut.

Once the clamp is placed on your mic stand, drum kit, or DESK! (yes i use mine in the office now on non-gig days to save surface space and avoid spillage onto important documents), you simply twist the wingnut until such time as the clamp is tightened.

So far, this clamp system has worked awesomely for me. Again, i’ve been able to attach the thing to non-rounded items such as bookshelves, my desk, and door jams. all with enough hold power to handle the weight of a drink.

While I originally set out to get a “swirlygig”, I have not tried it or others like it and can not attest as to their reliability and functionality, but I do know that I wanted something that would actually grip my mic stand (not just hang off it), and the Vater cup has exceeded my hopes.

There are several swirley gig reviews that complain of it being too big or too small for their particular mic stand. The Vater won’t have that problem because the clamp design. Just last week during a show a bartender was busy and by the time she brought the drink to me I was in the middle of a song.

Instead of putting my drink on the ground or on my marshall head as used to be the case, i motioned to the cup holder with my knee and voila, my equipment was saved and the drink was immediately within grabbing distance.

I love my Vater cup holder, and you likely will too. From one musician to another. cheers!.

A bit confusing at first as there is no instruction for the Aer (only for the other two which uses the adapter to hold in place) but I’m happy because the Aer doesn’t require the adapter and instead uses the integrated design to hook on.

It fits perfectly and can rotate but with enough grip to not move around, it can store thicker tumblrs or thinner ones thanks to the clasp on the inside which self adjusts to the bottle. I love that I’m now able to have a coffee and not worry about it spilling everywhere as have done in the past with cheap cup holders from amazon.

Not massively secure. Very easily pops off with the slightest knock which is very convenient if you have a drink in there. Doesn’t hold takeaway coffee cups securely which was originally why I brought it therefore most of the coffee has spilt out everywhere by the time you go to drink it.

This is great, however no instruction came with it. I purchased many items. I couldn’t recall what it was used for. I recommend an image like the one shown be placed in package, even if black and white, something.

I thought it was a novelty frame missing a space for a dowel to hang the sign. Seeing the image made me realize what it’s used for. It was an oh yeah moment. Prior I was even contemplating returning it because it looked like a dysfunctional novelty frame.

Include an image demonstrating use. This is awesome! Great for parties. Since the pen is upright guests know to sign their name, does not come with sharpee. Cool idea.

I bought this for several parties. So far I like it. I got natural. Looks great. Holds any medium sized marker or pen. Holds about 25 solo or other larger cups. Comes with 2 cute plaques. This will work great for labeling cups at the parties and events.

At least everyone will be able to locate theirs.

These were on backorder for FOREVER but then I finally received the 3 qty in white that I ordered months ago. I bought one for my home and the other 2 to give as gifts to my adult children. What a cute way to offer up cups with a way to put the name on for informal gatherings.

These are well made for the price. I found pumpkin orange solo cups and I am looking forward to using holder for the first time at a Thanksgiving gathering.

Love this drink holder. It has an inside removable cup to allow for larger sizes and hold a fine wine glass or a coffee mug with ease with a designed cutout. Bought 2 of these and they work perfectly if you had a small space not able to fit traditional end tables.

Definitely recommend. Worth it!.

Item exceeded all my expectations. I bought this for a xmas gift for my hubby to use for his diet MD and his beer, it worked out perfectly. Not only does he use it but it works perfect for my cup of coffee or wine (stem glass) too.

It is weighted so it is very secure and well made. Fits our wide arm sectional. I’m so glad that I made this purchase.

I was so excited for these that I didn’t even read about them. just ordered. Afterwards I was thinking that they might bet broke off if they were plastic. GUESS WHAT!? They are metal and very well made! I should have known better than to doubt BrUmate’s quality!!! LOVE LOVE LOVE!!.

This cup holder fits nice and snug onto the side of the Brütank. Such great quality and weight – made very well! My tumbler stayed on just w/ no issues as I was pulling my cooler. The Brütank is now complete with the cup holder addition!.

The brutank was all packed up in the car, and the rear seat didn’t have enough cup holders. Luckily the perfect solution was to throw the cup holder on. The mounting is very stable and my Toddy XL didn’t even lean in the West Virginia foothills!.

After hours researching cup holders online, I grabbed HandleStashes for myself, partner and a friend. Wow postage was a shocker to Oz, but Adam helped out! I was keen to test one on my new e-bike, so purchased a large coffee, jammed it down tight into the cupholder and took off.

The first bump I hit emptied coffee out onto the frame and my leg. Next bump same thing, down to half a cup now 😒. Rechecked my setup and then realised what I had done wrong, a matter of simple physics! I’d jammed the cup down hard so it was tightly grasped by the solid plastic ring at the top of the cup-holder, and of course every time the frame shook, coffee spilled.

I loosened off the drawstring and just “sat” the coffee cup into the “shock absorbing” material, didn’t jam it down, now it worked perfectly! The cup gently rode through bumps with the elasticised material smoothing out any jolts the bike encountered.

This HandleStash works like a dream when used properly, and I have not spilled a cup since, riding on standard cycle paths/trails/roads. So glad I purchased these, great service and worth paying the extra 😁 PS: works really well with ‘tinnies’ too!.

I love the concept of this drink holder and Adam from the company is helpful and responsive but it isn’t doing the job I hoped for. The pros include: -adjustable to handlebar. -adaptable to width and depth of a variety of containers -variety of color choices -fine for water bottle type containers with a closed top cons: -adjustments to level it a little tricky and needs tweaking after use.

-lightweight drinks get pushed up and out and fall out (McD milkshake for me) -drinks in plastic cups with straw (iced coffee for me) pop and spill out of hole in cover when hitting bumps. I was hoping the shock absorbing property would minimize that.

It did not for me. -The cinching drawstring helps with sizes but is a bit in the way. -expensive for what it does …and does not do. Great idea and I wanted to love it, but it did not handle my drinks as I hoped.

The many positive reviews gave me hope. I am glad it worked for so many others, but if you are expecting that drinks won’t spill, it may disappoint.

I like bikes and have found buying durable products allows me more time to enjoy biking. This cup holder is for our Benno Boost. We ride around town on this bike with our two boys to the beach, pool, park and to school.

A little coffee can go along way on solo parent day with the kids. Our previous cup holder had been a stroller accessory to fit the large diameter bar. Thankfully Handle Stash created a clasping mechanism that can grip the front rack of the benno boost.

I have had this product for a couple weeks now for daily rides to school and it has held up great. The Yeti Tumbler may be the stash’s limit. To make it work, I removed the styrofoam, push it until its snug, close the lid, and rotate the mouth opening away from me (upslope).