A cross band repeater radio is a type of repeater radio that is used to amplify and re-transmit signals on multiple frequencies. Cross band repeaters are often used in communications systems where there is a need to extend the range of a signal or to improve signal quality.
20 Best Cross Band Repeater Radio
1. Anytone AT-778UV Dual Band Transceiver Mobile Radio VHF/UHF Two Way
25W/15W/5W dual band VHF/UHF mobile radio transceiver with DTMF and 5Tone function! Color LCD. 180 degree rotatable TFT LCD display.
Single call, group call, selective call and emergency call are all available.
I really like this little radio. I say that having gone through various VHF & UHF radios, portable & base & HTs, over some five decades of playing radio. The front-panel program buttons are easy to use.
You can even personalize the layout. The radio is easy to program on the fly and even easier to just park a frequency, offset, tones &c with only a few button pushes. Of course, it’s expected that you’re not deluded enough to try and do this while zippin’ down the Strae.
But it’s still much easier than the TH-9800 (my in-house base station). The microphone is rather large but it has all the functions available on the front panel & is likewise easy to personalize for your needs.
And you can switch the radio to use the microphone as a speaker-mic, with an option to disconnect the radio’s speaker or use both the radio speaker and the speaker-mic setting. Quite sweet when cruising around.
The three power levels are perfect for driving around town & using local repeaters and the 20W high power setting works just fine for simplex conversations on the road. The audio output is clean and strong and the speaker is sufficiently large enough to use in a car.
I do wish that it had come with the programming software and cable (you have to deep search for the online download [from a Russian site]) but looking at the software, I’m probably better off hoping it’s eventually accessible through CHIRP (which I use for all else in the shack).
I believe the cable comes with the radio if you buy it from a British distributor/vendor. In all this is an extremely affordable, compact, easy to set up and use two band VHF/UHF transceiver. I am very impressed & am actually thinking that I might replace the base station set up with another one.
Hi, This is not a professional review or paid by anyone. I bought two AT-778UV radios after the resents earthquakes here in PR for my sons on their vehicles to be in contact if something worse occurs.
I have been a very happy Yaesu and Icom radio owner for many years but the price of those equipment’s is very high. After looking for a cost effective radio I found the AT778UV (sold under other brands like many China made radios) and I need to admit that they are really good radios, very well built.
Great TX audio and excellent receiver with a powerful speaker. The color display looks great! The unit can be programmed by hand if you want only a few repeaters and/or simplex frequencies but it is a task that can be a pain if you want to program a lot of frequencies and channels (up to 200 memories).
Programming cable is widely available on eBay. the cannot be programmed using Chirp and you can only use the Anytone software for this matter. The microphone is big but feel great on your hands. Unit get very warm when used for long periods of times but without any issues (in my case).
Sorry for my English. I can recommend this radio because of my experience with it. Thanks, Luis – WP3LR.
Great radio, owners manual. eh, not so much. Crisp clean auto, good signal reports. Build like a tank. Display bright and clear (though a bit cluttered). Would have given 5 stars but for the manual. Includes programing cable and software (this one did anyway).
Software is easy to use, a lot like Chirp but not quite as featured (very limited editing). I have been told it is now compatible with Chirp but haven’t tried it yet. Might even buy another.
High RF Power Output (50W) 1,000 Multifunction Memory Channels Dual Receive on Same Band (VxV, UxU) EchoLink MEMORY (Automatic Dialer) EchoLink Sysop Mode For Node Terminal Operation Multiple Scan Invertible Front Panel Choice of 2 Backlight Colors (AMBER/GREEN) For The LCD Panel 104-Code Digital Code Squelch “FIVE-IN-ONE” Programmable Memory The TM-V71A is a true dual-band operation radio so VHF+VHF/VHF+UHF/UHF+UHF operation is possible.
The detachable control head is easily connected with the optional remote cable. General Features High RF Power Output (50W) 1,000 Multifunction Memory Channels Dual Receive on Same Band (VxV, UxU) EchoLink MEMORY (Automatic Dialer) EchoLink Sysop Mode For Node Terminal Operation Multiple Scan Invertible Front Panel Choice of 2 Backlight Colors (AMBER/GREEN) For The LCD Panel 104-Code Digital Code Squelch “FIVE-IN-ONE” Programmable Memory.
Simple design and easy to use. A lot of radio in a very small package. I have other newer radios with more bells and whistles, but at the end of the day this will be a great go to rig. I picked this one up to build a portable base.
Dual-band radio with independent band settings, simultaneous receive if chosen, 1000 memory channels, 1 6 pin mini din port in back for high speed data — everything is good, except the built-in speaker is lacking in respects to audio quality and volume.
One ,Tough Dual Band Mobile Transciever,This is the second ,Kenwood TM-V71A,Ive owned,it looks good and is a solid quality radio too and a great performer in all respects,on transmit and receive and with all of the other options that this Kenwood TM-V71A has and can do too,if you find one at a good price buy it you wont be sorry,either for a base unit or for your vehicle,its a ,another great Ham radio dual bander ,from ,Kenwood,!!!!.
I,also own a kenwood Tm-733A,DualBander too its a tough,little radio also,for a Dual Bander,Both Are Great Radios and Dependable ,From Kenwood. KD8HMH.
The premium radio designed for long-range am reception and emergencies. Reception and audio are the main reasons to own a better made portable radio. With the new CCRadio-2 Enhanced version, audio can be accurately tuned for realistic human voice.
It can also be adjusted for good musical performance. Traditional FM reception is also a full step up in its ability to bring in a weak station clearly. It also has the weather band/alert along the 2-meter ham band.
The five memory buttons on top of the radio make it easier to change stations rather than front mounted buttons. The boost in AM performance comes from our patented twin-coil ferrite AM antenna. This technology can give a noticeable boost to weak am signals under most circumstances.
I’ve had the radio for a few weeks and use it almost daily. AM and FM reception are as advertised, the reviews raving about the quality of reception are not exaggerated. Sound quality is very good. It was clearly designed with vocal legibility being the primary goal, so without tone control adjustment music is pretty bland.
However, unlike a lot of radios with adjustable bass and treble, with this radio you can turn the bass level all the way up without it becoming boomy – in fact, turning it up all the way is just about right for music.
Turn the treble to about 2 o’clock, and you’re all set. Set them back to 12 o’clock if talk radio is your thing. I like the thoughtful touches in the design – the wide base makes it very stable when sitting on a tabletop, the rubber feet keep it in place, the carrying handle has a rubber insert for good grip, the display is large and very legible with excellent illumination, adjustable for brightness.
4 D cells should give very good battery life. Only time will tell how long the extremely thin top segment of the telescoping antenna will last. I can see how the top-mounted preset buttons could be susceptible to dust or moisture, so I will vacuum them periodically, which is not unreasonable.
The NOAA weather band is very useful, the 2-meter amateur band not so much, more of a novelty to me. It’s a bit pricey for a tabletop radio, but so far it appears the extra dollars get you a very well-built, good-performing radio.
As advertised, this is an ideal radio for listening. I wanted a receiver so I could listen to out-of-market baseball games at night, and the CCRadio 2E definitely fits the bill. I’m able to listen to the Reds, White Sox, Red Sox, Guardians, Orioles, and the two NY teams at night, with a minimum of deep fades.
I can listen to the two NY teams by day, but unfortunately cannot listen to the Orioles, because of the static. As for DXing, my Tecsun PL-880 with the Terk Advantage loop is better than the CCRadio 2E, mainly because of the static.
I can still DX with the CCRadio 2E, but I prefer using the Tecsun PL-880. All the same, I’m happy with the purchase, because the CCRadio compliments the Tecsun, and I just like the idea of the long life D batteries, which reminds me of my ye olde analog GE Superadio.
Since it weighs a ton, I can’t recommend the CCRadio for travelling, though I’d love to see how it would do on a camping trip, away from all the noise.
The CCRadio 2E Enhanced is very well made. The quality of the materials and fit/finish is very high and has a nice heavy feel in the hands. AM reception is exceptional. FM and weather band reception is also very good and the weather alert works well.
I am not sure if the 2-meter Ham band is working or not – I have yet to hear anything on 2-meters and there are a lot of Ham operators in my area so can’t say much about 2-meter operation. The radio is very much designed for talk radio which is what I bought it for but if you are looking for rich audio for FM then you might want to look at something else.
I wish there was a way to have the screen light come on/off with the radio and have it remember the brightness level the user set when last used but you have to turn the screen light on and off everytime – not huge but having more control would be nice.
Another feature that would be nice would be the ability to charge rechargeable batteries. As it is if you want to use rechargeables you have to take them out of the radio to recharge. Is the radio worth the price? I would say yes based on material and build quality and the excelllent AM reception.
There are other radios available at a much lower price that perform almost as well but are not built as well or with top quality materials. I am pleased with the radio and would recommend it.
Product Packaging:Standard Packaging WOW! The TYT TH9800 Quad Band Transmit, Twin Receive, Dual Display FM Radio Transceiver for the 10 Meter, 6 Meter, VHF 2 meter & UHF 70cm Bands!. Loaded with features, Over 800 Alphanumeric Memory channels! True automatic cross band repeater mode, Twin simultaneous Receive, w/separate Vol & Squelch controls! Multiple Tuning Steps,.
Includes full keypad microphone! Remote mountable Faceplate! Receive Range: 26-33Mhz, 47-54 MHz, 110-180Mhz ( with AM Air band), 350-399Mhz, 430-512Mhz, 750-947Mhz. 50W 2M & VHF / 40W 10M & UHF, with Multiple lower power settings available too.
ctcss, dcs (PL & DPL), DTMF, 2 tone/5tone signaling, ANI, Display Brightness setting & more! PC Programmable, w/downloadable free software, Requires 12-14Vdc power hookup, at 12A or more, and an Optional suitable Antenna.
Includes 12Vdc Power Cable & Mounting Bracket, SO-239 Antenna connector on radio. Built In Cooling Fan.
Let me start by saying this is a replacement for my handheld in my van. That being said it is a good radio. Other than that yea not so much lol. It definitely works and does have louder audio than other radios of this type that cost more, unfortunatly the audio has that kinda echoey qualitly you get from these.
I put a good mike on my handhelp and it sounds better than this and that is only a $30 radio sooo. I am not even going to comparre to my Icom because well it really does not compare, but as far as features are concerned my Icom does not compare so for a backup or backpak rig it is fully function and does transit quite well nice compatct size and has the removable faceplate option included so once again for features alone it can’t be beat.
I am thinking if I could find a replacement mike that would help but not much you can do for the reciever which has that works great until it has to work and then it falls on its face and no ssb so 10m is basically useless and does not work on 11m so less than useless lol.
Only having it a week, havent given it a proper work out. Thus far all seems to be working well. The audio is really quite good, that goes for both transmit and received audio. Programming even without a compulsive east and straight forward.
I had had the Yaesu FT 8900r for years, this is a fantastic replacement for it.
I have one that failed during a 2m simplex exercise. I was using a homemade 5 element yagi and it was tune for 2m. Antenna tuning likely was off and the VHF finals went low while transmitting on high power.
My power supply is flaky now too and is over voltage with a load. Consider an antenna tuner, a duplxer, or a well tuned 4 band antenna. And stay on battery. or a very well regulated supply. It only has one antenna connection.
This is a good price as when it 1st came out it was over $350. 00. I would consider another one if it was priced lower. It has a single board so it is hard to repair with no schematic. The block diagram is similar to the Yaesu version.
Aside from that, it had really good reports and range when it was working. Programming doable from the mic keypad and menu system. Chirps also worked. Dual listen, dual volumes and squelch.
The First Affordable VHF 1. 25M UHF Tri-Band Handheld Transceiver – A PC03 Cable is Recommended for Easy PC Programming CHIRP Supported – Backward Compatible with UV-5R and BF-F8HP Accessories New Features and Menus Simultaneous Display For those that want to have the most information at their fingertips – you can Sync the dual displays to show both the name and frequency.
This allows the displays to be synched to the same channel while browsing your channel memories. – Channel Skip Easily add or remove a channel from the scanning list. Frequency Scanning When scanning in the Frequency VFO Mode you can easily enter in the range and frequency steps that you want to scan without scanning the full frequency band.
ANI Updates Along with being able to previously send ANI Identification You can now enable Decoding the ANI right on the display – Remote Commands The UV-5X3 can respond to remote commands. By remotely sending DTMF tones you can both Stun Transmit Disable or Kill Disables all functions the r.
It’s my first triband rig of any kind. We already know it covers 2m (144mhz) VHF, and 70cm (440mhz) UHF, but the third band, that few of us hams think of, is “1. 25 METERS (222MHZ) also VHF”!! It actually transmits & receives either Low or High power, on all three bands, just fine.
The only thing I didn’t like is the two antennas that came suppplied with the UV-5X3. That means, one antenna works the 2m & 70cm bands. Now to work 1. 25m (222mhz), you have to change to the other antenna.
So. as soon as I could, I bought the “NAGOYA NA-320A TRIBAND ANTENNA”. Since it comes with different connectors, I bought the SMA female version that fits the rig. I tried the rig on all three bands.
I knew 2m & 70cm, it worked well on those bands. I had read up on, but had not used 222mhz. When I looked on the internet, I found two repeaters for 1. 25m close enough to hit and the National Simplex frequency.
I tried that band and it worked as well as the other two bands. Our local HAMFEST was just after I bought the UV-5X3, so I was going to try 1. 25m band. I forgot the dual band antenna, so I was stuck on 222mhz.
I heard nothing except both of the repeaters IDing once or twice. The manual is actually much much better than some of the BAOFENG (like the UV-5R I have), and probably others. I can actually read and understand it a lot more easily than the other ones, and it has more understandable things in it too.
The UV-5X3 can be programed either directly or by computer (you have to buy the cable to connect to your computer extra). There are a few things that will be programed by the computer, such as what you see when you turn the radio on, etc.
It is also faster on and programs a few more things on the computer. Remember!. the BTECH UV-5X3 triband handheld looks like a lot of other handhelds (such as my UV-5R), but it’s just outside looks, NOT inside.
It’s much different there. Overall, it seams to be the best triband handheld made now!.
The radio seems to transmit and receive well. Programming is difficult at best with some ambiguous directions in the manual. I tried the computer programming and it seems to have worked but the names don’t appear on the channel list only the frequencies.
I have had trouble hitting local repeaters on 2M and 70 CM and have to wonder if the programming imported is missing something. For a complete techno-geek this may be more simple but I have had some difficulties.
This is not my first ham radio and I have programmed them before. I think the instructions leave something to be desired. Some videos on youtube show steps that are not in the manual that make it work.
For the price this is a great deal. I like to do off roading with a group and they are starting to use UHF and VHF radios. With this radio you can listen to what is happening. I finally got my Amateur Radio license KJ6EH and now able to transmit legally with the radio.
It is so much clearer then the AM CB radio and goes further then FRS radios. I purchased an external antenna, extended battery pack, car charger to add to the collection.
Midland’s most powerful two-way radio features 40 watts of broadcast power. Communicate across 22 GMRS channels plus all eight repeater channels and utilize 142 privacy codes to keep your conversations discreet.
Most conveniently, the MXT400 communicates with handheld GMRS walkie talkies. Color: Black.
I have several of these radios, all have been dependable , and simple to use for family members that are not around radios often. However the fact that they will Not store more than one repeater with a tone on each of the 8 repeater pairs, or allow nameing each of thise repeaters is not good! If you travel you cannot simply change to another saved repeater in the area you are going to, without stopping, and physically deleting tones you have already saved for one area, then adding the new tones for the area you are going into.
A PITA ! That said, If you only want a basic GMRS radio, that will cover 8 repeaters programmed for immediate use without changing yout set tones, and a radio that is very good on simplex. This IS my choice ( I now own 2 Wouxun KG- 1000G radios!!!!!!! These are in our vehicles that we use when travelling , you can have lots of preprogrammed( and Named ) repeaters.
The MXT400 Bundle came well packaged and intact. Shipping was quick and efficient. I was pleased with the products when I opened the package regarding their heartiness and quality feel. Unfortunately, a few days after receiving the MXT400, the MXT500 became available, so I ordered the MXT500 and returned the MXT400.
I preferred the IP rating and dust proof aspects, and felt the additional cost for those items along with the additional 10W of power were well worth the extra cost. I anticipate good things from this setup once completely installed.
Bought the Midland Micro Mobile GMRS 2-way radio MTX400 in late August to set up as a base station in my home. After all other components purchased and installed, the unit became operational in early November.
Had to replace a protected breaker with a regular breaker. Worked great for about 2 weeks then noticed I wasn’t receiving any transmissions. A quick test revealed the internal speaker no longer works.
Several friends purchased this same unit and have had no issues.
Midland Radio Two-way radio features SOS siren that allows you to send out distress/locator signals in emergency situations. Radio offers long range communication up to 36 miles in open areas. 22 Channels PLUS 28 EXTRA CHANNELS – Clear, crisp communication with easy button access.
– JIS4 Waterproof – Protection in all directions against light rain or splashing water. XTRA TALK Power- Maximum Allowed by Law. 285 Privacy Codes – Gives you up to 6270 channel options to help you block other conversations.
36 Mile Range. – SOS Siren – Allows you to send out distress/locator signals in an emergency situation. – Group Call – Allows you to make “direct calls” to other people within your group without alerting the entire group.
NOAA Weather Alert Radio with Weather Scan – Automatically locks on to your local weather channel and alerts you to severe weather. 10 Call Alerts – Different call tones to notify you of incoming calls from your group.
9 Sensitivity Levels, Easy voice activation. – Midland Radio Two-way radio with 50 channels offers clear and crisp communication.
I bought 4 of these at the same time. ALL radios have less than 4 hours use- TOTAL power on time. All battery packs have been replaced within the last two months because of their natural life cycle. They suddenly locked up for no reason.
All packs have been charged appropriately, and all settings have retained themselves without pack batteries installed, making me believe the onboard memory batteries are still ok. Given the fact that all four of these locked up within a month of each other- if not on the exact same date and time- I believe this to be a planned obsolescence feature built in to the radios themselves.
I have tried all available low level troubleshooting I found online. Outside of this issue, menu navigation is painful, the open key has a miserably long swell time before transmit, making it difficult to hand these off to a novice user.
They get frustrated and despite repeated reminders, tend to start talking before the 1-1 5 second delay in transmit, making the whole usability far worse than expected. A well oriented hunting or other group may not have this issue, but be aware that there is some learning that should take place.
The included earpieces are next to worthless. A specially bought, better made earpiece or headset works FAR better, especially in VOX mode, which is all but unusable with the stock earpieces. The radios themselves are of appropriate levels of value for the price, at least until this lockup tool place.
Given that the most used unit may have transmitted less than 20 short messages and been powered on for something on the order of four hours total- and that they have been kept dry, 99. 5% of the time used indoors.
this issue is supremely irritating, disappointing, and, it rendered these unusable, completely unacceptable and worthy of sourcing from another company. I am ticked right now.
I read many reviews. I was aware range is an issue. I have been operating the radios in the FRS mode. Obstacles like walls and buildings absolutely reduce range. When I am using the radios at distances to a mile with few obstructions the sound is clear.
So far I have not exceeded a mile. My range in a car talking to my wife in a house is reduced to 1/2 a mile at best which is not bad (IMO). Knowing this should help you understand that the range numbers are all inflated and you shouldn’t expect results close to the stated maximums.
I bought the radios because my wife and I are moving to a remote area with very limited cell service. I intend to stick to FRS unless I require the extra power of GMRS. The $70 license fee for 10 years does not bother me.
The radios are a great value, home charger, car charger, ear phones for much quieter operation, and the options for customizing sounds, vibration and privacy are vast. Both Midland and B&H were quick to respond to my few questions.
I’m no radio expert but these fit my need perfectly. My son and I ride touring motorcycles and were looking for good communications that were practical. The expensive bluetooth units can be buggy and not always pair with other riders.
These won’t pair with them either but if everyone used a GMRS radio then motorcycle coms would be much easier. Initial test range was 2. 8 miles on high setting before it got too hard to understand. We don’t plan to ever be that far apart while riding.
They were paired with the AVPH2 helmet headsets, bought separately. We have full face helmets. I only wish they were rechargeable with a usb port. Space is limited on motorcycles. We can also use these radios for coms on family caravans.
Radio to workers or friends in rural or remote locations with this Midland two-way radio bundle. A 6dB gain antenna increases range for improved connectivity, while 15 high-power GMRS channels make it easy to find a frequency that works for you.
An included mounting screw lets you attach this system to a vehicle dashboard for convenient access while driving. With a backlit display and digital audio control, this Midland two-way radio bundle offers effortless operation.
Get the most out of your 2-way radio communication with the Midland MicroMobile MXT115 15-Watt GMRS 2-Way Radio Bundled Kit. This powerful 15 watt 2-way radio has a range that can extend up to 50 miles depending on condition and terrain.
It features 15 GMRS channels as well as 142 privacy codes to give you greater control over who hears your communication. The antenna can extend your range up to 2 times as far, so enjoy clearer and crisper conversations out of your CB radio with the MXT115 bundle kit.
I bought this Two-way to go in the combine on our farm. Installation was quick and easy, and I powered the unit with the DC power adapter plugged into the cigarette lighter. We have a couple of the handhelds that we use together with this unit and they work great.
Range with those is up to 4 miles in our area. Rural but quite a few tress and houses in between. One thing that we have trouble with is talking into the mic. Sometimes it is hard to understand the person that is talking on the Two-way.
I think most of it is inexperience in how to hold the mic up to talk so I am hoping this gets better the more we use it. Another thing I wish was available was a connector with flying leads to wire into the power point that the combine has.
I know most people probably cut the 12V adapter off and wire it directly into the power point, but this limits the places you can put it in the cab. I am sure a quick google search and I could find the connector, but if Midland offered this as an option when purchasing, I am sure many people would get it.
I really like the MXT115 radio. I am picking up transmissions 90 miles away using the MXTA26 Whip Antenna. I appreciate how small and powerful it is. It takes up very little overhead space on my Overhead MOLLE Panel.
I was able to mount the MXTA26 Whip Antenna very conveniently next to the drivers door of my JL Wrangler and cut the length of the MXTA24 Low Profile Antenna Cable to the perfect length and add a new PL-259 Male-Plug Crimp Coax Connector to plug in the back of the radio and have power is hardwired to an ignition active wire with no wiring showing.
Icom Ic-2300H VHF FM Transceivers continue the tradition of powerful and ruggedly solid 2 meter mobile transceivers. These Ic-2300H units offer all of the great features and simple operation that were the hallmarks of the Ic-2200H models they replace.
Now in a shorter chassis and a featuring a familiar user interface, Ic-2300H transceivers provide a full 65 watts of stable output power to “make the trip. ” A built-in Ctcss and Dtcs encoder/decoder, 207 alpha-numeric memory channels, a myriad of scan functions, weather channel receive and alert functions, and exceptional Mil-Std-810 G specification durability round out these versatile radios.
I purchased this unit about 3 weeks ago after researching several other 2meter band radios. I installed it in my old jeep wrangler under the dash on a fabricated pedestal mount for better convince. I downloaded the instruction manual and watched several YouTube on how to program the unit and have sense programed in 15 memory channels, not that difficult, 14 of which are repeaters.
From my drive way I have been able to hit repeaters as far as 40 miles away with good clarity on TX and RX frequencies. The antenna I installed with the unit was a 1/2 wave Diamond NR-770HA. I have only had my ham license for a little over 4 weeks, so I am not a seasoned ham operator at all.
Couldn’t be more please with the whole experience.
Surprisingly small, robust construction. Hugh heat sink! Love the 4 step power levels and 65 watts max. The instructions are a large sheet, not especially user friendly. I watched a couple YouTube videos and had it programmed in minutes! Only cons, the volume and squelch pots must be PC mounted, rather than attached to the case, so the knobs seemed a little wiggly.
I don’t care much for the mic connector either. They will probably be fine, but just my opinion. It does come with all hardware to mount mobile! Highly recommended.
I have had this unit for several years and find it a very good transceiver. My biggest complaint is the way the ops manual is written. Perhaps I am different (or not too swift) but I find the answers to most of my questions about programming repeaters, setting parameters, etc.
very convoluted and difficult to determine. I keep having to turn to different pages for a simple programming procedure. Rather than having a simple diagram or explanation, it seems necessary to find the tuning procedure on one page, look for the offset or other options elsewhere, numbering the channel somewhere else, and so forth.
Why not have one simple page for doing all this on one page or addendum? Maybe you are trying to use fewer keys (buttons) but the “soft key” concept is sometimes nearly impossible to remember and implement.
This Icom ID-5100A transceiver is an outstanding radio. The radio is loaded with features such as touch screen, dual band operation on 2 meters and 70 centimeters (440), DSTAR, GPS and an available optional Blue Tooth module.
I find at 50 watts, the radio has more power than you will ever need on FM. DSTAR has a steep learning curve, but the thick manual takes you by the hand and leads you through the maze. There are numerous DSTAR videos online to help you along.
DSTAR, C4FM, Fusion, and DMR all do about the same thing, digital, world wide, communications. But, I think DSTAR does it best. The built in GPS enables this radio to do Digital Packet (Position) Reporting to a computer system map, right out of the box.
There are no extra cost GPS modules to buy. This radio is available for about $450. 00 from all the major ham radio stores online. Add another $100. 00 if you want the blue tooth module. I love my state of the art ID-5100A Dual Band DSTAR radio.
Great radio, features are many not only for FM but also for DV. Display is easy to read and touch screen is easy to navigate, very little need to consult the manual. It would be great if it had a TFT display but maybe the next version will.
Make sure this fits by entering your model number. Double Band, Frequency: 144 – 146 MHz / 430 – 440 MHz Transmission power: 25, 15 and 5 W 200 Programmable Memory Channels Wide band with 25 kHz and narrow band with 12.
This radio has met my expectations. Though manual programming is cumbersome it aint no different that mostchinese radios. Audio reports from other hams is better than expected. Speaker Audio is loud enough to be heard when driving with all windows down.
The most attractive thing on this radio is the colored display, something different from the old amber colored display with black characters or blue and black. Colored display is pleasant. Programming with a cable is a must if you want to enjoy other features in the radio.
As far as the size and weight is concerned, it is conveniently small that I mount it off the cigarrette tray fastened with velcro strips glued to its mounting bracket. 25 watts is plenty of power to hit just about any repeater in San Diego County.
I have used all 25 watts of them constantly and radio does get hot but it all radios will do that. One neat feature I like so much is the speaker on the microphone. It sounds great. Some people complains about not having dtmf function and the front buttons I find the useful.
4 out of 5. More on that in a minute. This radio has some of the cleanest, clearest TR/RX audio I have heard from a mobile. The microphone is crisp and clear. Receive audio is loud and has punch. You can also use the speaker built into the handset.
But it does not get as loud. The display is color with lots of information, albeit a little small. But as you can see, the radio is not much larger than the hand mic. The 25 watts punches through in most usage scenarios.
It has 3 true power levels. Do yourself the favor and get the programming cable to use with the software when you order it. There are a few things “out of the box” you may want to change. For instance, as you can see there is only one knob, and it defaults to change channels, not do volume.
But the microphone already has channel up/dwn built in. If you want to change that default behavior, and make the knob work volume, you will need the software. You cannot change that from the onboard menu.
Manual programming is actually pretty easy, once you learn it, just like any other radio. Many of the menus and operation I found to be fairly intuitive having used several different radio brands. About that 5th star.
This radio does not transmit DTMF from the mic. So if you need DTMF for repeater management, or if your favorite repeater has DTMF “toys” that you utilize, then this radio is probably not a good fit.
Otherwise this radio has very good power and audio, in a compact configuration, with a really nice display, at a great price.
Bao – Feng BF-F8HP Dual Band (VHF/UHF) Analog Portable Two-Way Radio 3 Power Levels (1, 4, 8 watt) 2000m – Ah Battery. Full Accessory Compatibility with ALL UV-5R and BF-F8HP accessories. It includes the High Gain V-85 Antenna to optimize performance.
The BF-F8HP is legal for use on amateur frequencies. The BF-F8HP is able to Transmit on Narrowband (12. 5k – Hz) and Wideband (25k – Hz). The BF-F8HP has one built-in receiver but can “watch” two channels (semi duplex).
So far everything works as advertised. I don’t find that programing the BF-F8HP is that difficult as stated in some (many) blogs. Very nice the fact that batteries, antennae, accessories etc. are interchangeable with UV-5R.
I already have an older UV-5R. I saw this for a great price & figured I would snag it as another back-up radio. I have no intention using it for the additional output power. I had two 3800 mAh batteries laying around & a spare antenna from my UV-5R.
I felt the need to put a radio to the the accessories. I am only using it right now to focus on listening to certain scanner frequencies when there is bad weather or other events. Everything sounds very clear.
learning how to program this set up. a very good radio. nice design a little heavier. but that’s for your protection ! so it will survive some abuse ! this is a cool one for around S. W. Idaho !I don’t have a license yet so just listening.
I have been using a KT8900 radio in my Jeep and in my truck for over 6 years and I’ve been very happy with the transmitting range and the clarity of signal. I lead Jeep tours and this radio keeps me in contact with everyone in the group over miles of mountainous terrain.
I am buying 3 more radios for my guides to use. They take the abuse of operating in an open, vintage Jeep very well. I trust and use these radios for all my communication needs while on mountain Jeep trails.
The QYT KT-8900 is a small but powerful radio that is ideal for your vehicle. Easy to hide. Or display it proudly! It has a ‘loud volume’ control if need be. It is ideal for off-roading and around town.
We have five of these Anytone AT-6666 transceivers in operation. They work as or better than expected. When they arrive each was tested with an external frequency counter and found to be within expected tolerances.
As for wattage output performance they were found to meet or exceed manufacturer specifications tested via dummy load or two antenna variations @SWR < 1. 5. Heat dissipation is adequate thanks to a stout cast aluminum heat sink.
The SSB clarifier outperforms two Galaxy radios I have on-hand. The menu system has a slight learning curve due to the many useful options available on this radio. We found the display easy to read relative to comparably sized radios.
The internal metering system also passed our testing procedures. Speaker audio is reasonable/good. We have operated these radios for months without any issues to date. All were order through DNJ Radio.
This is a very compact, ergonomically intelligent, 10 meter ‘Export’ radio. It is actually performs well on 10 meters, and cheaper by 50% from the comparable Japanese models. I suspect it will primarily be used as an 11 meter rig, but, as an amateur radio licensee, that isn’t in my purview: YMMV.
It is a real bargain, none the less, and has worked well in my car to date. BTW, if you need extra power, this unit actually has a RF output control. That is a rare feature on portables, which I would think was included so that a ‘kicker’ could be installed.
In any event, a fun little unit, economically priced.
Nice package and controls are not poor quality as one reported earlier. Haven’t tested it on a resonant antenna, but heard some skip on CH6 of CB on a few occasions coming in pretty strong considering my antenna is a pair of test leads from VOM.
Mode works well and FM detector seems to be better than many. I’ll be putting up an AR-10 Cush Craft antenna for 29. 6 FM and playing with a Slim Jim for 28. 4 SSB made with some 450 Ohm ladder line.
Reports are that the power out is greater than advertised and from my experience if you are in a sunspot band opening, if you can hear em, you can work em with a lot less power than this has. I also picked up a Fire Stick for mobile, and will likely put this in my jeep.
Been a Ham for 53 years. this is a nice little rig for the money.
5 Watt Dualband Amateur Ham Handheld Transceiver! Select-able output power levels of 5W, 2. 5W or 0. 5W! Battery & Charger Included! Rugged Yaesu FT-4XR 2 meter/ 440 MHz Dualband VHF/UHF Radio. Ttransmits Amateur 2M & 70cm, Plus receive coverage from 65-108 WFM Broadcast Radio band, 136-174, and 400-480 MHz.
Compact and lightweight, Approx. size of 2. 1 x 3. 51 x 1. 21 inches, not including knobs or antenna. Three select-able output power levels of 5W, 2. 5W or 0. 5W 1 Watt of full Speaker receive audio.
Supplied with 1750mAh Li-ion battery pack and 3. 5-hour rapid charger is included. Optional SSM-16B Speakermike and Optional VOX SSM-512B earpiece mic available seperate. Also includes Severe Weather?? Alert, PC Programming with optional cable / sofware, Cloning with optional cable, Direct Keypad Entry, Automatic Range Transponder System (ARTS), CTCSS/DCS Operation, Busy Channel Lockout (BLCO), Automatic Power Off , Transmitter Time Out Timer (TOT) & more!.
I got this to supplement my Baofeng HTs. The Baofengs are known for their desense issues, wherein if there is too much ambient RF signals, they go deaf and you can’t hear anything. I got the FT-4 so I would be sure to hear something if it was there to be heard, even if the Baofeng HTs couldn’t hear it.
A knowledgable friend tested this, as well as some Baofengs and other HTs, in our RF-rich environment. He found that the FT-4 is only slightly better than the Baofengs, probably because they both use the same single chip technology.
Also, the FT-4 is so new that CHIRP doesn’t support it yet, and the Yaesu software is terrible. It is rudimentary, bare-bones software with no way to import or even cut-and-paste frequencies. I had to manually type every one of the almost 200 channels from our local ARES template into a file! On the plus side, the third-party FTDI cable worked with only minor fiddling on Windows 7.
That said, it’s a solid, well-built little radio. It’s well made and uses the same SMA-F antenna connection as the Baofeng, so you can use the same antennas. But accessories like the speaker mikes are not compatible, and cost half the price of the radio! Would I recommend it? Probably not yet.
It is a solid radio at a good price, but It seems to be only marginally better thanmy Baofengs, and CHIRP doesn’t support it yet. If you have Yaesus and need a backup HT, you could do worse.
Your Uniden Bearcat 980 SSB represents the highest quality communications device designed for use in the Citizens Band Radio Service. It will operate on any of the 40 AM frequencies authorized by the Federal Communications Commission (FCC).
I understand why this product is no longer available, many of the units have a screen that is unreadable during the day. I wish I had looked at product forums, I would then have found out it is a common problem.
Uniden supposedly replaced my unit and it is exactly the same, unreadable. Their telephone support suggested I build some sort of cover to shade it during the day. seriously? The support supervisor said Uniden won’t do anything about it, So I am stuck with a $130 CB radio that I can only use at night.
I will never buy anything from Uniden ever again, and if asked about Uniden will provide honest feedback on my experience. They sell an unusable product and don’t stand behind what they sell.
I’ve been a cb’er since the 70’s and owned several radios. Everything you read about this Uniden 980 is true. I’ve had it for over a week, matched up with a Hy-Gain 5/8 wave penetrator 500. Powered by a new 12 volt car battery this radio is awesome.
The beep was a bit annoying at first and I heard it had been eliminated so it wasn’t expected. But with all the cool features and perfect performance I no longer care if it beeps. Easy to read face, DX or local output, color choices, good reports on mic quality, and many features I like.
The SWR meter is a bit off compared to my separate meter, reads a bit higher than it is, which, if you think about it, could be viewed as good. The pass/fail test on ant. helped me with my ground. Told me it had gone bad over the years so I beefed up the connection and got a “pass”.
So I am very pleased with this radio in spite of the beep.
This is a decent radio if you’re looking for something basic. If you’re using it indoors the display is fine. if you want to use this in a vehicle the displays absolutely horrible in the daytime. I need to be able to see the display to tell what channel you’re on and also how strong incoming signals are on the S meter.
I was basically unable to see anything on the display with the brightness setting all the way up. Not to mention at night the display could also be better. I feel like the President McKinley has a much better display which is very easily seen during the day or night in a vehicle.
Although for the money that anytone at-6666 is a much better radio for a few dollars more.
The Alinco DR-735T dual-band covers the 2 meter and 440 amateur bands supporting full crossband repeat operation. Power may be selected at 50, 20 or 5 watts. Intuitive operation is assured with separate volume, squelch and tuning knobs for each band.
The extra large display supports selectable multi-color RGB backlighting. 1000 Memories are available. The head is remoteable. The rear panels has two speaker ports. The advanced 10F3 digital mode with speech compression technology is available via the optional EJ-47U board.
Supplied with EMS-79 backlit DTMF microphone. Band Coverage: 2 meters / 70 cm Transmit Frequency Range: 144. 000-148. 000 MHz /70 cm 430. 000-450. 000 MHzMARS/CAP modified Features of DR-735T Full-duplex receiver enables simultaneous TX/RX within 144/440 MHz bands as well as V/V and U/U receiver capability.
Features eight full RGB color LEDs enabling you to customize your display colors in the set mode. Fully independent frequency, audio level and squelch knobs for right and left VFOs make it seem more like operating two mono-band radios rather than a dual band transceiver.
Simply press the volume knob to select the VFO you wish to use for transmitting. Cross-band repeater function available on all DR-735T radios. ( Be sure to observe all regulations applicable to cross-band operation.
The radio is easy to program using the RT systems software, and works great. The only minor downsides to this radio, which were not surprises to me, are 1) the internal speaker is OK but not great. 2) The cooling fan makes a moderate amount of noise that would be a non-issue in a vehicle, but might be bothersome in the shack.
By way of comparison though it is no louder than the cooling fan on my FTDX-3000 when I am operating FT-8. 3) I wish it had more than 6 character alphanumeric display for the channel names. But honestly for the price it is a wonderful radio, and the multicolor display is SUPER useful.
Memory management and the scanning function is GREAT. I had considered the various current production Yaesu and Icom rigs, but decided against them. Yaesu doesn’t seem to include any memory bank functions in the new models and I like the display and ease of front panel programming of this radio over the Icom analog offerings.
I would give this radio five stars except for one significant design limitation. The radio has a six-pin data port in the back (a good thing) for connecting TNC’s or, in my case, a SignaLink sound card interface.
A menu item activates this port and assigns it to either VFO A or B. On whatever VFO you assign it to, once it’s active, audio from the microphone is cut off (and what’s really weird is that you can still key the transmitter with the mic, just no audio goes out).
So, once you activate the port, you lose that VFO for any phone use. This becomes very annoying, as I take part in a weekly NBEMS net in which we are doing both – voice and data (which is allowed on VHF/UHF bands).
So I have to constantly switch back and forth between the VFO’s. I used to have a Kenwood TM-V71a which still allowed phone use of the VFO selected for the data port. The biggest plus for this radio (and the reason I bought it), is the ability to select a specific power output for “medium” power.
You can select anything from 1 to 50. I didn’t like the fixed power outputs on the V71a, which are 5, 10, and 50. That’s a big jump between 10 and 50.
I just ordered and received mine this week. Hooked it up and programmed a few channels last night. Already have about 5 or 6 hours of talk time on it. Everyone tells me how great it sounds, and how clear it is.
Programming was slightly more difficult than my other Alinco, but nothing terrible. Quick and easy wattage change. Quick and easy tx swap for the dual. The color selection for the screen is nice. Choosing a color easier for my eyes.
My only complaint is how stiff the mic cord is. Using this a base/shack radio. When I decide if I want one in my truck, I’ll likely get another one.
The TK3402U16P is a UHF business radio with five watts of transmit power that provides coverage where longer range is required. The 16 channels, 90 built-in frequencies and 207 privacy codes make for more secure and clear communications.
This model meets some of the toughest Military Specifications and it is designed for all day, heavy-duty use in all work environments. It can be used with a repeater for extended range and coverage. Compatible with Motorola and other radios set to the same frequency and code.
I bought three of these for my family. We use them basically in many circumstances. Some times when any of my daughters go to friend’s houses around the neighborhood, some times when shopping, some times when we are out of the country and we are not willing to pay high rates using a cell phone, parks, etc.
I would say they have three realistic advantages comparing to the “bubble” radios; durability, battery life and clarity of voice. Other than that, don’t expect to have anything else. I mean, my expectation was that their power would let them incredibly longer range.
They didn’t. Anyway, good investment. Instead of having to buy new every 12 -18 months, now we have been with these and working perfect for about 3 years.
Superb two way source for communication. Fine quality rugged construction loaded with features very desirable in radios. I recommend this exact model for anyone seriously looking into walkie talkie radios.
Yaesu FTDX-10: Transceiver, Compact, HF-50MHz, 100W, Hybrid High Perforrmance Receive, SDR 3D/2D Panascope, Color Touch Display, External Monitor DVI, 13. 8 Vdc, Each – The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration – Narrow Band SDR and Direct Sampling SDR – like the FTDX101 series.
The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the “affordable class” transceiver.
Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click “More Details” for Features and SpecificationsMain Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver:- Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series.
The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp “cliff edge” shape factor.
Thanks to the Narrow Band SDR’s latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation.
– 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation.
– 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input.
Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available.
– Front Panel Designed for Superior Operating Efficiency – MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels.
– Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network.
Additional features of the compact Yaesu FTDX10 include: – 15 separate band pass filters – Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) – High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 – Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan – High Speed Automatic Antenna Tuner with a large capacity 100-channel memory – RF & AF Transmit Monitor – Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) – QMB (Quick Memory Bank) – Band Stack Function – Optional speaker SP-30 designed for the new FTDX10 – Optional 300 Hz Plug-In Roofing Filter? XF-130CN.
±0.5ppm (32°F to +122°F/0°C to +50°C, after 1 min)
DC 13.8V ±15%
1st IF 9.005MHz
Reviews From Real Customers
I can’t say enough good things about this rig! First off, the recieve quality is excellent. The level of settings customization on RX and DX is unparalleled. The SQ, NB, DNR, Shift, Contour and Notch settings give you the power to pull even very weak signals out of the noise and make them sound crystal clear.
FT8/FT4/all other digital modes have been a dream on this thing. For some perspective, my first rig before this one was the QRP Xeigu G90, which no doubt I would recommend to any new ham looking to get started in the fun that is HF.
This rig, though, is like moving to a Cadillac after driving a Ford Pinto for 10 years. On the G90, which I had grounded along with its 100w amp (the XPA125b), the sensitive electronics (including the GCFI outlets in my home) operating around it would sometimes bug out depending on conditions and frequency due to RFI and EMI.
This absolutely does not happen with the FTdx10, whether I’m running 1w or 100w — 0 RFI or EMI. The tuner on this thing is fantastic with my Chameleon EMCOMM III-B. From 10m – 160m, it tunes it up perfectly.
The waterfall and built-in oscilloscope are quite helpful. Having the touch screen is a built in bonus, allowing you to easily switch between monitoring power, AC, SWR, etc. There are two built in preamp settings and at least three different levels of attenuation to utilize depending on conditions.
I promise you will NOT be disappointed with this radio. It’s in my shack to stay!.
The Icom IC-7300 has been king of the hill for over 6 years. It is and has been an amazing transceiver for the money. Enter Yaesu with the FTdx-10. Personally, I like the organization of the menus and buttons of the 7300 hundred better.
There may be other things people like when they compare the 7300 to the 10. But, one thing is abundantly clear once you turn on the FTdx-10 and tune around a crowed band. It has the receiver or at least something close to the receiver of the FTdx-101.
It’s amazing – truly amazing. The selectivity of the FTdx-10 is awesome. Nothing I’ve ever tried has a receiver that compares to the 10 or 101. Tuning is absolutely perfect. Two stations so close that their traces on the bandscope doesn’t show two signals – yet the 10 splits them apart with ease.
Tune onto a station with really good audio and you will be rewarded with near HiFi sound. Something near to as good as it gets. Even the builtin speaker sounds great. I prefer small HiFi speakers with a good response from 100Hz to above 15KHz and the FTdx-10 is a real pleasure to listen to.
One can get fatigued listening to harsh, distorted audio. t least I can. So a receiver that processes and produces clean audio is essential to really enjoy sitting back and having a long ragchew with a station that has setup their transmitter properly.
The 10 richly rewards you with great audio. I personally, find the noise blanker, noise reduction, and bandwidth control to work amazingly well. I have an electric fence about a mile long. About each second the charger sends a pulse into the wire.
This pulse covers 40 through 17 and is clearly audible as a snapping noise hitting S9 every second. The noise blanker makes it disappear. Imagine that. An S9 noise source almost completely disappears hen the NB button is pressed.
The bandscope works well. It doesn’t use averaging as many other transceiver do and this might be something to address. But, it refreshes fast and really defines each signal’s bandwidth and strength.
You can add in even more tools to see a station’s performance with a real-time oscilloscope. Pretty cool for taking a close look at someone’s audio characteristics. There are a few annoyances that Yaesu should really fix.
Push the band button and if you aren’t quick it will disappear before you have a chance to make a selection. This one is hard to understand. Why would there be any timeout on menu options? It makes no sense.
I understand from the Yaesu tech that answers email, that this is the number one complaint from users. The user interface as a whole is not as easy to use as the 7300. This issue unfortunately manifests itself in all of Yaesu’s new radios.
Once you get used to where things that you care about are, it becomes less of an issue. All in all, the FTdx-10 is an incredible radio for the money. It looks nice with a beautiful, bright 5″ LCD display.
Despite a few annoying flaws, this is one great radio. The receiver is like breaking the sound barrier all over again. It’s a technology breakthrough like no other. One thing I wish all modern radios had, and it kind of stuns me they only Elecraft really thought of this, is a single push button that generates a constant carrier of an adjustable level of power for tuning amplifiers and tuners.
How can new radio after new radio come out and omit this one highly useful and even necessary feature? For the money, the FTdx-10 has no peers. It is absolutely first in its class. There is nothing in its price class that even comes close.
Pros: I can’t gush enough about this transceiver’s receiver quality. I can pull stations out of the noise like never before. The trans mitter is also excellent. The build-in antenna tuner works so well it handles a couple bands without the need for an external tuner for my doublet antenna with 450 ohm ladder line.
Another pro is its DVI interface so I can control it from my desktop monitor with a moust and keyboard. Now for the cons: I need to dedicate a mouse and keyboard to the unit, since it doesn’t know how to handle a USB switch.
It was, IMO, a poor design choice to place so many buttons around the dial where you’d likely to hit the dial when pressing a button and getting pushed off frequency. I’ve gotten used to hitting LOCK every time I tune so that won’t happen.
In addition, I prefer ICOM’s method of moving in 1 kHz steps. It’s on or it’s off. With the Yaesu, it’s only on for a while and turns off by itself. And if you accidentally touch the inner tuning dial, it goes off immediately.
A cross band repeater is a device that takes a signal from one band of frequencies and retransmits it on another band. This can be useful in a number of scenarios, such as increasing the range of a radio signal, or allowing communication between two radios that otherwise would not be able to talk to each other.
There are a few things to keep in mind when using a cross band repeater. First, the repeater will need to be powered, either by an external power source or by batteries. Second, the repeater will need to be able to receive the signal that you want to amplify and retransmit.
This means that the repeater needs to be tuned to the same frequency as the radio that you’re using.
Finally, it’s important to remember that a cross band repeater will introduce a slight delay in the signal. This is because the repeater needs to receive the signal, amplify it, and then retransmit it.
This delay can be a problem if you’re trying to use the repeater for voice communication, as the delay can make it difficult to carry on a conversation. However, for most other applications, the delay is not an issue.
Overall, a cross band repeater can be a useful tool for increasing the range of a radio signal or for allowing communication between two radios that otherwise would not be able to talk to each other.
Just keep in mind that the repeater needs to be powered and tuned to the same frequency as the radio that you’re using, and that there will be a slight delay in the signal.