Will not hide the natural beauty of jewelry. One part coating, no mixing, no waste. Thin, durable coating is practically invisible. Will never yellow or discolor. Protect plated metals, seal jewelry and stop skin discoloration.
Preserve Patinas from discoloration or wearing off. Easy to apply. 4 oz can covers approximately 25 square feet. Use for very small projects or trial. Removable. Unsure what you need?.
This product is self annealing/leveling in most applications and now comes with more specific tips and imstructiins than previously both on the bottle and on a separate flyer. I currently work with copper, brass, sterling silver and stainless steel with small details and negative spaces.
i was considering the dip version byt so far ths has been convenient, quick, clean and durable. perfect for on the road/travel shows. Just please dont breathe it in!!!.
This stuff is everything I hoped it would be! I use it to coat my bezels before I add the artwork. (Allowing curing time of course) I left one bezel out in the weather for a couple weeks. Rain, sun, etc it STILL looks like brand new.
Im inexpressibly pleased!! <3 absolutely fantastic product. Will recommend again and again.
Strongly recommended it if you live areas where rust can be a problem, especially on the coast. It spreads easily and keeps keeps stainless steel shiney. I sealed all of our kitchen appliances with it.
Aluminum Protect Clearcoat Quart For years of protection against oxidation, weathering, stains, UV rays, corrosion, salt spray and electrolysis. Makes re-cleaning a snap. Will work on aluminum, fiberglass, brass, copper, stainless and most metal surfaces.
Rejuvenates and restores faded or oxidized surfaces. Clear-coat is easily applied using 3″-4″ foam brush or can be sprayed using an HVLP type sprayer. Clear-coat will not chip, crack or peel. Note: Clear-coat is not an Anti-Fouling paint.
A durable, clear finish topcoat for interior woodwork, trim, doors, cabinets, and furniture. Crystal clear finish offers durable protection to preserve the original beauty of the surface. Great clarity makes it perfect for use over light woods, pastel-stained woods, and painted surfaces.
Water-based formula provides fast drying for quick recoating, low odor for ease of use, less irritation, and warm water clean up of tools and equipment. Recoating in 2 hours and dries completely in 3 hours.
For best results apply 2 to 3 coats with a synthetic bristle brush.
I use this product mostly for final finishes on ceramics, but have also used it on metal, wood, gold leaf, and some plastics. It dries quickly, gives an even glossy coat, brings out color, and is very durable.
I have used it on lacquered, painted, and glazed surfaces. It can be cleaned with a damp cloth. Most surfaces I use it on do not get a lot of handling, so I do not recommend it for anything that will get heavy use.
Also, this product is not compatible with some acrylic-based sprays and may change surface of some plastics. I also have found that it will not adhere to some plastics used in modernist furniture. Best to test before use.
Use a light spray to avoid drips. Repeat thin coats give better results than thick ones.
I signed up with a home depot account just so I can write how awful this product is. There is no way to lay down a decent finish. No matter what, you will end up with stripes. Possibly because it dries so quickly that it cant actually sink the next pass onto the overlap from the previous.
I’ve wasted money on 3 cans, I’ll probably have to sand it all off and buy another product so money and much time wasted. I should have checked the US home depot site for reviews. many there have said the same thing.
We purchased this as a final cut on a wood fish tank stand after using the 2x gloss black spray paint, which we loved. This spray is like throwing powder at whatever you are painting. If you spray from the recommended distance, it looks like it’s old dusty furniture and you can’t fix it because it drys instantly.
If you get closer, the paint drips automatically and does not go on evenly, so you have some shiny spots and matte spots. Because it dries immediately there is no hope to fix it. We now have to try and get the lacquer off and paint again with the 2x gloss black product again.
We are very upset and wish we knew about this before because we would not have used it and will never use it again for anything.
This Toon-Brite Protective Clear Coat for Boats rejuvenates fading or oxidizing metal surfaces and provides a long-lasting barrier against the elements. It is a perfect clear coat option for aluminum, fiberglass, brass, copper, stainless, and other metal surfaces.
This protective clear coat is designed from a corrosion-resistant non-conductive formula and will make future boat cleaning considerably easier. It will provide years of protection against oxidation, UV rays, weathering, stains, salt spray, and electrolysis.
Easily apply a clear-coat with either a 3-4 inch foam brush or spray it using an HVLP type sprayer. Be sure to clean and dry the vessel surface prior to application.
Kwik gloss clearcoat is an acrylic urethane clearcoat that meets all current and proposed VOC regulations. It can be used with all solvent and water based basecoats. It is suitable for all automotive refinishing as well as trucks and equipment.
DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
A gallon of DiamondFinish Clear should cover 400 sq. ft. single coat coverage.
This finish seals, protects and enhances painted surfaces including wood, metal, plastics, ceramics and more. The perfect top coat for a lasting professional finish. Suitable for both indoor and outdoor use, with UV protection.
A 400ml can will cover approximately 2m2 depending on the surface profile/ porosity. Simply apply a few light coats to your object, allowing 20 minutes drying time between coats. Your item is hard dry in 24 hours.
Eastwood’s 4:1 Premium Show Clear is a high solids clearcoat made from superior European resins. It dries fast, with a beautiful gloss and excellent depth of image (DOI). Flows and levels easily with no shrinkage or dieback.
Features excellent durability and long lasting UV protection, weathering and everyday wear. High-Solids Formula Builds Quickly Crystal-Clear with Excellent Gloss Excellent Protection and Durability Super Easy to Polish Approximate coverage per gallon: 140 SQ FT Maximum operating temperature: 150 Fahrenheit Eastwood Premium Show Clear can be applied over Eastwood Single-Stage Urethane or Low-VOC Urethane Basecoats, or other manufacturer’s paints as well.
This is a National Rule Compliant system (Clearcoat; Max VOC 4. 8 lbs/gallon when mixed 4:1).
SMR-1100 Speedo-Line National Rule European Clearcoat has been specifically formulated for the automotive repair industry. SMR-1100 is a 4. 4 voc 2K acrylic urethane clear with superior UV and chemical resistance.
SMR-1100 is easy to apply and can be BUFFED in 8-12 HOURS, yielding a high DOI. Age Group: adult.
High-gloss finish provides excellent UV resistance and durability. Fast-drying formula is great for spot repairs. Blends easy and gives great depth. Can be wet sanded and buffed. Great on aluminum rims.
12. 2 oz Spray. CAUTION – Respiratory Protection is required when painting. Not included.
This crystal clear acrylic coating spray provides a permanent protective gloss coating that will not yellow with age. Moisture resistant and smudge proof. Use for photography, watercolor, charcoa pencil, painted surfaces, wood crafts and much more.
Add a special protective layer to your vehicle with the Speedokote SMR – 1150/1103 clearcoat slow kit – This 2K acrylic urethane clearcoat resists UV and chemicals – Comprises a gallon of clearcoat and a quart of slow speed activator – This car paint is for easy buffing – Meant to impart high gloss for a rich look – Temperature range: 80+°FTotal weight: 4.
A beautiful, clear, protective finish for wood and metal. Ideal for interior wood surfaces. Can be used over bare or stained wood. Dries to the touch in 30 minutes, can be recoated after 2 hours. No sanding needed between coats.
Acts as its own sealer, but can be applied over Minwax lacquer sanding sealer for added smoothness. Dries to the touch in 30 minutes, ensuring a smooth, dust-free finish. Requires no sanding between coats.
Great for woodwork, cabinets, furniture, doors, accessories.
Provides a more impervious surface to food and oil stains and imparts a rich patina to the teak. SEMCO Clear Coat can be applied by itself or over SEMCO Teak Sealer. It will slightly darken the shade of the wood.
This stuff is great! I was cautious at first but I’ve been using the honey color on the teak of my boat (caprail, coamings, hand rails, and companion way) for two years now and love it. It won’t give you that shiny, beautiful, dock queen look, but it WILL FREE YOU FROM YOUR TEAK, while keeping your teak healthy and protected from the sun.
Think of it like really uniformly colored light-grey teak that isn’t grey, but freshly-sanded looking instead. The teak doesn’t grey because it is protected from the sun, and algae and mold won’t grow on it either, so it doesn’t darken or get spots.
After a few base coats, you just need to apply a coat in the spring, and one in the fall to keep your teak looking healthy and nice. It is a really quick job that I don’t loathe anymore. You just brush on another coat.
No sanding or other prep. Don’t use tape, just follow with a rag and a little acetone if necessary. The truth is, most boats on the dock with varnish or cetol having peeling, worn, or chipped spots (you can verify this yourself very easily).
Varnish and cetol are difficult to do properly, so most boats end up with a blotchy look. If your’s doesn’t, congratulations, you should keep doing it! So, that said, while properly maintained varnish or cetol look fabulous, teak sealer does not look *fabulous*, but it looks *really good* and never looks spotty unless you aren’t even willing to spend a couple hours on it a year.
In that case, just let your teak go grey, or get rid of it. Even though I know this sounds like an advertisement or something, I have no relationship with Semco. My ONLY connection to this product is that I think it is great, so I’m doing my part to spread the word so that it stays around and I can keep using it.
I really like this product. I sanded down my teak deck, cleaned it up and applied two coats of the natural tone with a foam brush followed by a rag. A little bit of this goes a long way, you can apply the second coat immediately after the first and it turns a very pretty golden brown.
Varathane Crystal Clear Spar Urethane Spray offers outstanding UV and weather protection. Use this outdoor-approved clear sealer from Rust-Oleum to add years to the life of exterior wood projects. This water-based spray is low odor and comes in a 11.
25 ounce aerosol can so you don’t have to worry about brush strokes marring your satin finish. Apply a minimum of 4 coats for best results.
Rustoleum – Crystal Clear – Get the ultimate, long-lasting protective coverageand lower VOCswith Rust-Oleums High Performance 9700 System 250 VOC Acrylic Polyester Urethane. This polyurethane coating maintains its rich color as it fights rustperfect for aggressive environments.
I have restored old cars as a hobby for 40 years. Ive used all the rust prevention products, corroless, por 15, red oxide, acid, vinegar, etc. probably the best encapsulation I found before was corroless but, Eastwood doesnt sell it anymore.
I started using epoxy mastic and boy am I happy with it. The thing about epoxy mastic that you have to remember is that it doesnt dry, it cures. Also, unless you want to wear a breather, dont spray it, brush it on.
I have found the best results with a little more than 50% activator mixed with the tint.
Pro 2K Clear gives a high gloss finish and is extremely scratch and petrol resistant. n – After 24 hours it can be mechanically polished and gives a very tough two part isocyanate finishnnProXL 2K Clear Lacquer Aerosol for Motorcycle & Cars – Petrol Resistant 200MLIDEAL FOR MOTORCYCLE TANKS & MORE.
n – PRO2KCLEAR is a superior high gloss crystal clear finish that has excellent gloss retention. This product is easy to activate and apply with mechanical polishing possible after 24 hours. n – Product Features: n–n – Genuine 2K isocyanate lacquern–n – Brilliant gloss retentionn–n – Very scratch resistantn–n – Gives a spray gun finish everytimen–n – Ideal for Motorcycle tanks & Smart repairers – Once can is activated it must be used within 24 hoursn – ADDITIONAL POSTAGE CHARGES MAY APPLY FOR THE FOLLOWING LOCATIONSn – Channel Islands, Ireland, Northern Ireland, Scottish Is – T.
Very quality Primer, 2K is perfect for creating a high quality paint finish. Although this quality does come at a cost, with only a 200ml for around 10 I could have easily doubled the quantity for a better finish but it does cost alot.
Clear Gloss Krylon 12 ounce lacquer spray paint creates a high gloss factory like finish on projects inside and out. This ultra-hard, durable finish is moisture-resistant. Dry to touch in 15 minutes, dry to handle in 1 hour.
For use on wicker, wood, ceramic, plaster, glass and metal.
A clear coat for copper can be a great way to protect your investment and keep your copper looking great for years to come. There are a few things to keep in mind when choosing a clear coat for copper.
First, make sure the product is compatible with the type of copper you have. Second, consider how easy the product is to apply and how durable it is. Third, take into account the price of the product.
With these factors in mind, you should be able to find the perfect clear coat for copper for your needs.