It is effective against a broad spectrum of bacteria, is fungicidal, and inhibits odors when used as directed. It delivers non-acid cleaning performance in an economical ready-to-use bottle. When used as directed, RMR-141 RTU will disinfect, clean and deodorize most residential and commercial surfaces like; kitchens, bathrooms, hotels, offices, hospitals, basements, behind and under sinks and countertops, garbage cans and storage areas, and other places where bacterial growth can cause malodors.
RMR-141 RTU is an all-in-one product for treating wood framing, carpets, and other porous and nonporous surfaces as well as part of a complete mold remediation project. This is your go-to product for water damage restoration, sewer cleanup, mold removal, disinfecting porous surfaces and deodorizing.
Its the only ready-to-use disinfectant that kills 141 organisms!.
I always thought this was more of a mold killer and disinfectent until i recently used iit on the kitchen floor right out of a spray bottle. I soaked the floor in sections about 4ft by 4ft then brushed it around because our floor is not smooth it has some texture to it and Im not good at always taking my work boots off everytime I run in from outside to use the bathroom were as my wife reminds me so i figure lm going to disinfect the floor but to my surprise the RMR sprayed ,scrubbed a little then wiped up with a big old bath towel flipping it around as to keep a clean section to the floor done a super job at removing my ground in dirt disinfecting and the floor was not slippery as with some cleaners i have used in the past when it dryed.
I was impressed. Oh I should mention so was my wife.
spent a boat load of money on this and Rmr 86. at first I was really impressed. Seemed to work as advertised. under 10 to 20 seconds. stain gone. wood literally looked brand new. i WAS really happy. I then applied the RMR 141 RTU.
AS DIRECTED ON LABEL. after this. no lie. all the wood looked brand new. Extremely impressive. BUT. I returned to my attic exactly 2 and a half weeks later. only to find probably 75 or more percent of ALL the stains were RETURNING.
Very disappointed. especially after spending over 500. 00 on all this “Miracle” solution. Not worth the EXPENSIVE PRICE TAG IM SORRY. I literally went to the biggest grocery store you know. bought 7 or 8 gallon jugs of CLEANING BLEACH.
returned to my attic and applied bleach straight to the areas of returning mold. Yea it took about 1min for the stain to disappear. but. months later. NO STAIN OR MOLD GROWTH. I’d ask this company to refund my money if I hadn’t used it all.
Hands down bleach was the better option. LOADS CHEAPER AND MOLD STILL HASNT RETURNED. over 3 months now and STILL NO MOLD GROWTH. Maybe I’m just lucky. but after applying bleach to the same areas that , after using RMR SOLUTIONS(AND IT RETURNED NOT EVEN 3 WEEKS LATER).
there is no new mold growth. Save a few hundred dollars. go with bleach. This product did remove it fast. but what does that matter if it returns in less than a month?.
Concrobium Mold Stain Eraser is a powerful cleaning solution that targets tough and embedded mold and mildew stains on outdoor and indoor surfaces. Perfect for black mold stains. Ideal for: Tile showers, bathrooms, basements and outdoor furniture, decks, patios, fences, walkways, railings, siding, gutter and roofs.
Works on: Wood, composite wood, concrete, masonry, drywall, grout, stone, fiberglass, tile, plastic, laminate, aluminum and metal.
I have been searching for over a year for a mould remover. I was about to give up when I found Concrobium Mould Control. Bought it to clean the mould from the seats on my 12 year old pontoon. I tried it on the captains chair with poor results.
Then I realized from reading the internet literature again that what I really needed was Concrobium Mould Stain Eraser. Went to Lowes and bought a jug. My wife chastised me for wasting my money on another useless product.
I mixed up a 1/4 supply as per the instructions and tried the captains chair as a trial area. Came back 2 hours later to find I had one clean chair and a bunch of very dirty seats. Early the next morning while the boat was still in the shade I mixed up another 1/4 supply and Started on the seats.
Two hours later my wife came down and was completely shocked. The seats look brand new, it is absolutely unbelievable. I went over to my son’s place ( he has a brand new boat, sold his old one because of mould stains).
I told him I had just replaced my seats on the boat, what did he think? His response was how much did they cost you? When I told him $20 and 2 hours of work he was floored. No one can believe how good the seats look.
The boat feels and looks brand new. Thank you CONCROBIUM. Wish I had taken before and after photos.
Super-great product. The only one I’ve found that can get rid of 1-2 yr. old mold stains of Sunbrella covers & biminis & furnature. It’s somewhat “involved”, & a bit of work. (I’ll be making a video) But worth the work.
They’ve stopped making it (hopefully they’ll change their minds on that bad decision), so it’s wuite expensive at “scalpers” rates.
Just opened up our nice hardtop and found dome mould on an bulk end. Really not happy. I am pretty anil so I reasearched lots, then went to my neighbourhood Lowes. Asked my contact and he recommended this.
Got home, measured out what I needed added HOT water, waited as per instructions and applied with a clothe. I wore gloves and eye wear just because. 90 percent came off right away. Amazing. Will spot dab 1 area.
Highly recommend. Ps, and it’s safe for my Rockwood Premier 2317g canvas.
New and improved sprayer works in 10 minutes guaranteed Removes mold and mildew stains Reaches 2nd story Cleans wood, vinyl and brick siding Cleans up to 4,500 square feet Home Armor E-Z House Wash Hose End is like pressure cleaning with your garden hose! With the new easy spray selector, Home Armor E-Z House Wash Hose End quickly and easily removes dirt and exterior stains caused by mildew, mold and algae from the exterior of your house.
All without any scrubbing! The new and improved spray nozzle has four options to meet your cleaning needs. Jet setting, shower setting and two options for wide spraying. The 64 oz. bottle cleans up to 4,500 square feet and easily reaches your second story.
With its patented design, Home Armor E-Z House Wash Hose End is 2X stronger than competitive hose end products that deliver bleach-based formula. Just spray it on, wait 5-10 minutes, then rinse it off.
Cleaning your siding is that easy. It’s guaranteed to work in just 10 minutes and is ideal for use on: vinyl, brick, painted wood, stucco, concrete, trim and siding.
Jomax House Cleaner and Mildew Killer is a powerful concentrate that you mix with water and bleach to eliminate mold and mildew from exterior surfaces around the home. Removes dirt and stains without scrubbing.
I love this product and am unable to find it in local stores any longer so decided to order it on ebay. When it arrived the shipping box was wet and smelled strongly of bleach. Upon opening the box the individiual box with X14 logo was saturated with the spilled x14 and all the bottles were wet with it also.
I dried them with a paper towel and tightened each of the lids. I put them in another box with plastic under it incase it was still leaking. It did not leak any further. It seems apparent that the tops were not on tightly and during the shipping someone must have laid the bottles on their side causing the leakage.
I would recomment that before shipping the tops be checked to make sure they are on securely and you might consider putting on the shipping box “this side up”.
We used this product after finding water damage in the used motorhome we purchased. We were upgrading the floors and brother in law recommended it. Cleared up all the mold that had built up over the years.
This stain remover removes mold mildew stains and odors caused by mold. Its powerful formula is twice as strong as the leading product and allows you to clean with no scrubbing. It is ideal for use on grout, tubs, tile, toilets, fiberglass, shower doors, vinyl curtains, counters, sinks more.
Bleach based formula. Disinfects odor causing germs Use indoors outdoors. Twice as strong as the leading product. Cleans with no scrubbing Use on both interior and exterior.
The first thing to note is this is a lot stronger than I expected both in effectiveness and smell. DEFINITELY use in a well-ventilated area or it can take several hours for the fumes to go away depending on how much you use and how well you rinse.
You also definitely want to wear gloves while you’re using to avoid skin irritation. Also if you have any respiratory issues or you are sensitive to strong smells you may want to wear a mask (the smell is vaguely similar to bleach if that helps at all).
My house has varying levels of impact from mold all around the house and I found a very bad/thick area of mold yesterday which pushed me to do more about it than spot clean (which is why I bought mold armor).
I was disappointed this morning when I checked that area and there was still mold BUT the bottle does instruct you to pre-clean highly affected areas so that it can penetrate better, which I didn’t do.
I sprayed it again a few minutes ago and it’s already looking better. Another thing to note is that it is also a mold stain remover. This means it can “bleach” fabrics or other porous materials. I did have this happen on the side of a wooden table, but I noticed it and wiped it off quickly, and its not in a noticeable spot so I don’t really mind.
If you’re using it in a highly visible spot though, I would recommend spraying it on a rag and then wiping it around until dry (and then rinsing). It may not have the same preventative effectiveness as letting it sit for ten minutes but it will still get the mold off.
Overall it seems to be very effective in killing mold; the mold began to dissipate immediately upon being sprayed. I can’t speak to the preventative effectiveness of it since I’ve only been using it for about 12 hours.
The instructions do say to reapply every seven days to inhibit mold growth, which is the biggest downside to me since my house is hard to ventilate and the chemical is so strong. TL;DR it seems to be a great cleaner both for mold and otherwise, but read instructions to use it safely and effectively.
I had some stubborn mold in the shower stall in a bathroom that has no windows, so it is so often damp and dark, a perfect place for mold! I have used other bleach products which work fairly well, except the mold eventually returns.
The products I have been using require laborious application and then scrubbing with a brush. This MOLD ARMOR spray is amazing! I used it on the few areas that did not respond to my usual remedy and within a few minutes the grout was beautifully white again!! The odor is pretty rough, so do use a mask, rubber gloves and I recommend goggles.
I ran the vent fan, also. I just rinsed the shower after about 10 minutes and I am very happy!! Who doesn’t like an effective product that does not require a lot of scrubbing and toil? Hurrah!! I do wish that the product had more specific instructions about how long to leave on, and if it can go on wet surfaces or needs to be on dry surfaces.
I had a small hint of mold in the corner of one tile in my bathroom, so I decided to use the product to kill and seal the place. After I sprayed and nothing happened, in few hours all tile grout that was sprayed over started to get yellowish.
in few more hours orange, and at the end of the day it was all dark brown. on a completely white tile grout before. I tried to clean it with few products, including bleach. No results!!! It stays dark brown as it was some kind of resin that sogged in the grout.
Thank you, Home armor, for I have to regroit my bathroom because of your awful product!!! I’m so frustrated that one product vas do such damage. I wish they allowed me to post some pictures to show you.
Concrobium Mold Control is a proven mold fighting solution that effectively eliminates and prevents mold. It can also be used to clean up mold and get rid of musty odors with no harmful chemicals. The product works as it dries by crushing the mold spores at the roots and leaving behind an invisible antimicrobial shield to prevent future mold growth.
Use Concrobium Mold Control for water damage restoration, construction and renovation (pre-treatment of building materials), specialty mold clean-up and prevention and general interior maintenance. This patented formula is used by homeowners and professionals.
Mold Armor Mold and Mildew Killer plus Quick Stain Remover kills mold and mildew in one application and kills 99. 9% of bacteria in 10-seconds. Not just a typical bathroom cleaner, this mold remover spray works wonders on non-porous surfaces including bathtubs, shower doors, toilet seats, countertops, sinks, sealed grout, vinyl, garbage cans, plastic surfaces, sealed fiberglass, sealed granite, glazed porcelain tile, glazed ceramic tile, laminate, formica and linoleum.
This mold and mildew remover and shower cleaner spray kills 99. 9% of bacteria in 10-seconds and eliminates 99. 9% of household bacteria, viruses, fungi, germs in 30-seconds. Nothing will get your shower cleaner than this mold control shower spray.
Follow all directions carefully and keep out of reach of children.
10/10 this stuff is freaking great. I feel like you could put it on a moldy piece of bread and it would make it new. Jk. But put it in a couple closets that were ate up with mold so bad it was getting on the stuff in there.
Threw everything away, sprayed it all over the walls and then wiped it with a dry rag after a couple minutes and they looked brand new. Temporary fix to a bigger problem in my case, but it for sure works.
Blew our minds when we came back and all the mold was gone.
Mold Armor Mold Remover and Disinfectant is a one-step formula that kills 99. 9% of household bacteria and viruses, destroys odors and inhibits the growth of mold and mildew when used as directed. This EPA registered formula is an effective way to clean up after storms, floods and sewer backup.
It is also effective against odor caused by smoke. For household and institutional uses. A One-Step Disinfectant, Cleaner, Sanitizer, Fungicide, Mildewstat and Virucide.
This product works as designed. Educate yourself on the various products and how they work before purchasing. i chose this product since it was highly concentrated. i am currently remediating mold and this product will go a long way.
i will use it in various areas, but my current intended purpose is to spray the dirt in my crawlspace before encapsulating. Lets get something clear first. There are products that kill mold and leave the body behind and this is absolutely fine.
it all depends on the intended purpose. if you intended this product to kill mold and remove the body with absolutely no work on your part, then look elsewhere. Bleach will obviously make a noticeable difference vs this product because bleach “bleaches” and can dmg the surface you are working on.
furthermore , bleach is not preferred because it stays on the surface of what you spray. if you intend to use bleach, then mix with dish liquid to help it soak into the surface. bleach is not approved for mold remediation but it does have uses so take the time to research what you really want and which products will give it to you.
do you want to kill everything? do you want to kill it and remove it with no work? there are products many times more expensive , but this product is cost effective and worth it.
I have learned that if you have kids, you need products to combat mold and disinfect heavily used areas. For us, it is the kid’s bathrooms. They are unable to keep it dry and after tearing up the floors at one point and rebuilding, I am very keen on preventing it from happening again.
First off, this comes in gallon size and it is ready to use. I like to get spray bottles and pour it in for an easy application. I spray all over the bathroom and tub/shower areas, I focus a lot at the base of the tub and toilets.
It has prevented any mold from growing and the scent is not overpowering. It smells great. The disinfecting properties give me peace of mind knowing that we won’t have any more instances of tearing up the flooring.
I keep a bottle of spray in my kitchen for the sink and one in the mudroom. This is a fantastic product without any heavy chemical smells.
My mother has a bathroom where even though she has an exhaust fan, the moisture still has a tendency of being a little much at times. She noticed a little mold on her wall. She used this and it made things easy for her.
She followed the instructions on the bottle and went to work. The smell of this cleaner isn’t overbearing. It’s got a pleasant scent and doesn’t smell super chemically. She didn’t have to scrub or anything.
It just wiped off. It also didn’t take any of the paint of the wall like some cleaners she has used in the past. The thing that we have noticed after using this is that it does help with her not accumulating mold as quickly.
We will he replacing her exhaust fan with something a lot better this weekend but we will definitely always keep this on hand if we ever run across the issue again.
Mold and mildew stain remover size 32 ounces Tough on stains from mold and mildew without using bleach or other harsh chemicals. This bleach-free formula dissolves stains from mold and mildew and forms an invisible shield that protects against stains in the future.
1. Always test on an inconspicuous area. 2. Turn nozzle to spray position; spray 6-8 inches from the surface and allow to sit 5 minutes. 3. Rinse or wipe clean with a wet cloth or sponge and allow the surface to dry. 4. For tougher strains, scrubbing or an additional application may be required. 5. Re-apply product lightly without scrubbing or rinsing to help protect the surface. 6. Repeat every 1-2 months.
Caution: Eye and skin irritant. See other cautions on back panel. Contains Ethoxylated alcohols. Avoid contact with eye and skin. First Aid: In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention. Safety Data Sheet available. Keep out of reach of children. For emergency, call your physician, local poison control center or local emergency room. For product health information, call: 847-367-7700.
Reviews From Real Customers
This stuff worked great. I used it on some mold around my windows and patio doors that have been there for over a year and it came off no problem. I let it soak for about 5 mins as outlined in the instructions.
Tried using vinegar in the past on mold in the same areas and it didn’t work very well. Highly recommended.
I had some very dirty spots with black mildew on the back of the house and a few sprays of this and a bit of light scrubbing has it looking better than new. Love that it doesn’t have any bleach in it yet still cleans so well!!.
Our grandparents, uncles, and aunt’s gravestones were barely readable due to the buildup of the moss that grows on them. We didn’t know if the mold and mildew remover would work but it worked wonderfully.
First we sprayed them, let them soak and used a soft brush to remove the moss, rinsed them and they looked like brand new even though one was over fifty years old. Highly recommend this product.
Mold & Mildew Stain Remover Plus Blocker is a no bleach professional strength formula that removes tough mold and mildew stains and protects as it cleans. Safe, fast, and effective on most interior and exterior surfaces.
Cleans and prevents mold and mildew stains, Interior / exterior use, Fresh floral scent.
We, (my husband & I) were fixing a condo across town. The bath tub drain was clogged up. Some really horrible stuff came up when we put the drain cleaner into the drain. I had just bought this product (krud kutter) the day before.
It really cleaned that tub. Then I decided to clean the grout in my own kitchen. I tried several different products. Then I tried the krud kutter. Wow!! I was really happy with the results. I would definitely recommend it.
Mold Stain and Mildew Stain Remover is a ready-to-use formula that quickly dissolves mold and mildew stains with the power of bleach. This easy to use formula allows you to spray and rinse surfaces clean.
This mold and mildew remover is an excellent bathroom cleaner for eliminating dirt, stains and grime on toilet bowls, sinks, tubs and more. With the professionally concentrated bleach level, this mold and mildew stain remover leaves grout and surfaces whitened.
Controlling mold and mildew is important not only for maintaining appearances, but also for creating a healthy environment. Spray Nine Mold & Mildew Stain Remover is the ideal cleaning product for accomplishing both.
With regular use, Mold & Mildew Stain Remover will prevent growth of mold on treated surfaces for 7 days. It also disinfecting hard non-porous surfaces in only 45 seconds versus the 10 minutes typical of most competitors.
We own a camper and this is all I use to clean the outside of it. Our camper gets black streaks running down it after each rain or just sitting. if you own a camper-you know about the black streaks that always come.
This product works so perfect to wipe those off. I tried other products and did not work as good as this. It is easy to use, spray on and wipe off. It a spot is harder to get off I just let spray sit on it for about 5 seconds then wipe.
Our camper has been painted 3 years ago. This product does not harm our paint. As long as we own a camper, I will always have this on hand. It really works perfectly. The smell isn’t overpowering either.
MOLD ARMOR E-Z House Wash is an easy outdoor cleaning solution that kills mold and mildew in minutes. It cleans the toughest outdoor stains with its bleach-based formula, blasting away stains caused by algae, dirt, and debris.
E-Z House Wash will not harm your plants when used as directed. Great for use as a siding cleaner, vinyl, brick, stucco, aluminum, concrete, painted wood, trim, PVC, plastic, masonry, and gutters. To use as mold remover or mildew remover, spray surrounding plants with water before and after use.
Start from the bottom and work upward. Wait 5-10 minutes before rinsing. To use as vinyl siding cleaner surface preparation, use formula at full strength for tough stains or dilute for typical stains and dirt.
Apply with a garden sprayer, roller, or sponge. Do not use a high-power wash pressure cleaner to apply. Wait 10 minutes and then rinse with water. This is a 1-gallon mold cleaner refill for an E-Z House Wash Hose-End product.
Keep out of reach of children and follow all directions.
Mold Armor mold remover and disinfectant is a one-step formula that kills 99. 9 percent of household bacteria and viruses destroys odors and inhibits the growth of mold and mildew when used as directed.
This EPA registered formula is an effective way to clean up after storms floods and sewer backup. It is also effective against odor caused by smoke. For household and institutional uses. A one-step disinfectant cleaner sanitizer fungicide mildew stat and virucide.
The WM Barr FG552 Mold remover and Disinfectant work well to get rid of odors like mold that is growing in my bathroom. This is a good sanitizer to help get rid of bacteria and viruses. The WM Barr is used in hospitals to help get rid of pathogens such as viruses, mold, blood, mildew, and fungus.
This is supposed to not stain your floors, tiles, or counters but I would do a spot check to make sure. I use mine for the bathroom and sink because there was a slight smell that is a bit strong and this helps get rid of that smell.
I like that it doesn’t contain bleach so I don’t have to worry about changing into white clothes so I don’t accidentally bleach my clothes. I usually just spray and leave it on for an hour because of scrubbing and washing it off the spray.
I would recommend this if you are in need to disinfect germs or bacteria in your house. This product isn’t use for removing discoloration, there are other WM Barr products that are great for removing discoloration if you need it.
This is more of a disinfectant for removing microscopic germs, viruses and odors.
I’ve been using this in my bathroom. I’m not sure if its because I have well water. But my toliets turn black around the inside rim and green in the water. I have been cleaning them daily trying to stop this.
Then I tried WM Barr FG552 32 Oz Mold Remover & Disinfectant. This cleans and leaves a light scent. But the best part is the black and green hasn’t came back. Now I can wait a week to clean the toliets instead of daily.
It is just my husband and myself in our home so I shouldn’t have to clean like a public place. This has made my life easier and my home cleaner.
I have to make sure my bathroom and kitchen are completely clean so my family won’t get sick! Mold Armor is a great disinfectant as well as prohibits the growth of mold and mildew! It’s so easy to use, just spray the bottle for the kitchen, bathroom, and through the whole house.
Protects my whole family with a quick spray on all our hard surfaces. A great product to clean, disinfect and sanitize! Give yourself a peace of mind knowing this cleaner won’t hurt, but protect.
Mold Armor Instant Mold & Mildew Stain Remover is two times stronger than most products, cleans without scrubbing, features a bleach-based formula, and can be used both indoors and outdoors. Age Group: adult.
Remove stubborn mold and stains without scrubbing or using bleach with Wet & Forget (800006). It’s easy to use. No rinsing, scrubbing or power washing is required. Simply mix with water and apply it with a pump-up garden spray.
The Wet & Forget mold remover goes to work to gently remove growths over time. Surfaces stay clean for up to one year or more in most cases. Wet & Forget outdoor cleaner is a gentle formula so it can be used on non-porous outdoor surfaces like siding, roofs, decks, walkways, painted surfaces, vinyl, plastic and fabric patio umbrellas.
Available in a single, one-gallon container, it also comes as a convenient two-pack to meet the needs of larger surfaces. Get the job done with this non-acidic concentrated cleaner.
I began using this stuff about 3 years ago and i’m hooked. It works it’s magic slowly but surely as it’s exposed to the weather conditions. The first time using it did take a few weeks to notice a difference and from that point on was a clear noticeable difference.
It has worked faster each year since. I apply in early Spring so it has a chance to do it’s magic and by Summer it’s pretty much done. My sidewalks, stairs, pavers, brick, and vinyl fence look like new! My house sticks out like a sore thumb in a good way compared to the rest of neighbors on my block.
JOMAX Mold & Mildew Stain Remover cleans and removes mold & mildew stains from walls, ceilings and wood surfaces so they are clean and ready for painting. The bleach-powered formula is great for cleaning and removing mold & mildew stains on fiberglass, tile, grout, vinyl, plastic and other surfaces in mold & mildew-prone areas like bathrooms, basements, laundry rooms and kitchens.
And, it also removes tough soap scum buildup. JOMAX Mold & Mildew Stain Remover is easy to usejust spray on, wait five to ten minutes for stains to disappear and rinse off! No scrubbing is required. Available in a convenient 32 oz.
spray bottle, the adjustable spray head delivers a spray or a stream of cleaner. When used weekly around sinks, bath and shower stalls JOMAX Mold & Mildew Stain Remover can prevent mold, mildew and soap scum buildup.
My neighbors don’t particularly care for the bleach smell when I use this, but when it comes to getting rid of the black mold spots on my composite decking or the green mold that forms on the vinyl siding where the sun never hits, nothing beats this stuff.
spray it on, let it sit for 5 or minutes, and spray it away with a hose. No scrubbing needed. No power washing needed. You can’t beat this stuff.
Get quick cleaning results with the Star Brite Mildew Stain Remover. Use it to get rid of unsightly blemishes on fiberglass, vinyl, plastic, rubber or painted surfaces. This Star brute stain remover begins to work on contact and does not require hard scrubbing.
The special buffered formula will not harm vinyl upholstery or threads. Star brute Mildew Stain Remover is a much safer alternative to using bleach and is also suitable for use around the home or in RVs wherever mildew stains are a problem.
This cleaner is designed for convenient use. Simply spray it on, scrub lightly and then rinse off the spot. It comes in a 16 oz bottle with a spray trigger. It offers an ideal solution to the unsightliness and health risks associated with mildew.
Mold & Mildew Cleaner & Blocker with Trigger Sprayer – 16oz303 Mold & Mildew Cleaner + Blocker quickly and safely cleans and removes tough mold and mildew stains from virtually any water-safe surface.
Not only does this product Clean unsightly mold and mildew stains that have already formed, it will also help Prevent mold and mildew stains from re-occurring on the treated surface. Unlike other mold & mildew cleaner products on the market, this product does NOT contain bleach, and will leave behind a fresh scent, with no strong odors to worry about during or after use.
Works safely on vinyl, plastic, painted surfaces and even safe enough for use on fabric!.
I first bought this for $15 in the store size spray bottle. I read about its uses online and then put it through the test. I drove part-time Uber/Lyft Suv Lux. I maintain my own cars and it’s a pain carrying around several different spray bottles, one for the dash, one for the leather, tires, exterior plastics when you are a perfectionist in keeping your car in brand new shape.
With that in mind, I also read about the uses on serpentine belts, all of the tires, sidewalls and tread, soft rubber door seals. I tried it on everything. After I bought the small bottle, I bought two gallons on Zoro and they lasted me over 3 years ( well worth it).
The end result of a 2016 Tahoe Lt with 72,000 miles on it ( 3 years at this point which I bought brand one-year, I know I’m repeating myself) and it still looks like new. As I rotated the tires, I sprayed this stuff on the tread, sidewalls (factory junk Uniroyals got close to 60,000 miles on them).
I have sprayed the door seals, no cracks and still supple. All the interior vinyl and leather as new. I even sprayed the serpentine belt in the engine ( difficult to due properly since I didnt take it off and you need to get it on top and the bottom) but it still looks brand new with no wear in any manner.
You can throw away 4-5 products and just buy one. I cant tell you how many compliments I get despite having over 600 plus rides including my own family trips and abuse of this SUV. I have seen plenty of other same year Tahoes and Suburbans and the interior looks nothing like mine.
My only complaint. there is no company that makes a decent chemical resistant spray bottle. I even buy the heavy duty ones and they all leak after several months of use. Too bad 303 didn’t make a bottle as good as the product.
Shake the gallon real good before refilling your spray bottle and shake the spray bottle before use also.
Learned of 303 Aerospace when researching dry rot after 5 yr old tires (car not garaged) wouldn’t pass inspection because of cracks in the treads. Numerous more knowledgeable sites I found recommended 303 and talked about how many of the well known silicone products were actually bad for rubber and some could accelerate dry rot.
I don’t use the silicone products because hate the slick, shiny, greasy-feeling surface they leave. 303 leaves a surface finish that looks rich, conditioned, not shiny, newer than before. I’ve used on car tires, plastic/vinyl car trim, plastic planters, plastic outdoor chairs, certain painted lawn decor.
After use, surfaces are much easier to clean, ex. used to have to use mild abrasive cleanser to get marks off plastic lawn chairs. UV protection important for outdoor plastics and rubber. Wish could find 303 in local stores, will keep sending away for in the meantime.
I have been using 303 Aerospace Protectant on my boat vinyl ever since discovering it in the hot tub community where it’s used to keep covers looking good. It does a great job keeping vinyl looking new.
I’ve used it on 5 boats now in the last 20 years, and the oldest one is nearly 30 years old. The vinyl still looks very good. Highly recommend!.
The most effective way to remove black mold is to use a commercial black mold cleaner. These cleaners are designed to kill and remove mold spores from surfaces. When using a black mold cleaner, it is important to follow the directions on the label and to wear protective gear, such as gloves and a mask, to avoid exposure to the mold spores.