Lipo batteries need a charger in order to function. This charger provides the power necessary to keep the battery charged and to keep it working properly. Without a charger, the battery would eventually die and would no longer be able to power the device it is attached to.
20 Best Charger For Lipo Batteries
1. Venom Pro 160W Duo AC/DC LiPo & NiMH Battery Charger
High power charging circuit allows fast and efficient charging to your batteries
Fan cooling system helps dissipate heat to offer protection against overheating
Backlit LCD screen helps you to access the functions easily
Dual Charge Circuitry This charger features two individual charging circuits allowing you to charge 2 batteries simultaneously, regardless of battery chemistry or cell count. High Power Charging Circuit The Venom Pro Duo charger features a powerful 80-Watt charging circuit.
The charger can safely charge or discharge up to 15 cells of NiMH or NiCd batteries and up to 6S LiPO batteries. Lithium Cell Voltage Monitoring The Venom Pro Duo Charger can monitor and balance individual cells within a LiPO battery in either charge or discharge mode.
Multiple Chemistry Charging The Venom Pro Duo charger will charge NiMH, NiCd, LiIo, LiPO, LiFe and Pb battery types. Multiple Charging Leads Included The Venom Pro Duo comes with the following charge leads to include the most common connection types.
The Venom AC sport balance charger is a peak detection charger that allows you to quickly and safely charge your lipo, LiHV, life, NiMH, and NiCd battery packs. The charger can charge 4, 5, 6, 7 and 8 cell NiMH and NiCd battery packs and balance charge 2, 3, and 4 cell lipo, LiHV, and life Battery packs at a user selectable Rate of up to 3 amps.
The Venom AC sport balance charger includes a built-in power supply, charge status LED and LCD display to show the current percentage of charge. With a simple two button design, charging batteries has never been easier!.
This charger was in the catalog as having 5 different charging leads. It arrived with only two (EC3 and XT60). I checked other online sources and apparently Venom no longer supplies the JST,, Receiver (RX), Tamiya and Deans charge leads.
I was able to find the JST lead at another source. Otherwise it’s a suitable charger.
The Hexfly HX-403 AC/DC Battery Charger is an easy to use multi-functional charger with built-in LiPo balancing for 2S – 4S LiPo or LiFe batteries. You can charge two 2S batteries at the same time or one 3S or 4S battery.
This Hexfly HX-403 charger has over 3 times the power of the basic Redcat LiPo charger which is included with Redcat brushless RTR vehicles. This means more time driving and less time waiting.
I had a hard time finding a decent quality lipo charger that could charge 2x 2s batteries at a reasonable price. This one is compact, can be plugged with AC or DC. It can charge 1x 3s or 1x 4s lipo as well.
The charger senses the cell count so all you need to do is plug in your battery and select the charge rate. It’s not the fastest but it is charging through the balance plug ports so you can charge any lipo regardless the connector.
Simple charger that gets the job done and wont break the bank.
This is the perfect charger for your 2S-4S LIPO/LIFE RC Batteries. This is a smart charger so it knows what size battery it’s charging & shows you each cells voltage. When the battery or batteries are fully charged it automatically beeps multiple times to let you know it’s finished charging on its backlit LCD Display & it will charge 2 of the same type batteries at the same time.
This company manufacturer at RedCarRacing stands behind their products.
I bought this charger because it was affordable but now I regret it. I have brand new batteries and I need to put them on twice before they are fully charged. They say they are charged after 58 mins but they arent.
It also smells like burning plastic when its charging. I would say spend the extra 40 bucks and buy a better hobby grade charger.
The Battery/Charger Completer Pack is the perfect complement to your 8s equipped X-Maxx. The pack includes two 4-cell 6700mAh iD LiPo battery packs for 50+mph tire-scorching 30+volt power. Traxxas iD batteries are the easiest and safest LiPo charging solution when used with our exclusive iD chargers.
You just plug in your iD battery and press start. The iD charger handles all the settings and quickly gives you an optimized charge every time. The new 4s capable EZ-Peak Live Dual multi chemistry charger comes equipped with built-in Bluetooth to work with the new EZ-Peak Live app for iOS and Android.
The app gives you detailed information and advanced operation through a high-definition color interface.
So you get a duel charger and two LIPO batteries for the price of the batteries alone, whats not to like. Batteries supplied take 40 min to charge & run a 1:10 Traxxas Summit for 30 min. of hard running.
My only wish is the charger was “Live” bluetooth connected but that’s because my Summit is & its just a feature that would work for me. Haven’t tried it as a single charger as my Summit runs two batteries but I can imagine the charge times would reflect the power this unit has.
Great charger! Pretty straightforward when using ID Traxxas batteries. I run 2x 7600mah Lipos in my Summit with stock everything, a little over 45mins play time on 2nd charge from this charger. I def would recommend this charger to beginners and novices and seasoned RC fellows.
Does a great job, smooth charge, balancing. Pairs well with Traxxas batteries.
What can I say other than Easy to use. Specially when it is the first time we use Lipo battery. I fill confident that we will do the things rights to charge and store the battery without difficulty nor mistake.
Also charge pretty fast in Balance mode. Very happy with the purchase.
The Prophet Sport Mini charger is an affordable and versatile AC powered charger that can be used to charge car, truck, boat, aircraft and quad batteries. With the ability to charge 2S, 3S and 4S Li-Po batteries as well as 6-8 cell NI-MH batteries at selectable charge currents, the Prophet Sport Mini combines quality, value and performance to give you a convenient and easy tool to handle all of your charging needs.
Built to last, the case is designed to disperse heat to keep the unit cool while the small footprint helps save space. LED indicators display charge status and easily selectable charge current and 1-button start/stop make operation a breeze.
Don’t let the Prophet Sport Mini’s size fool you. With a built-in 50W charge circuit, the Prophet Sport Mini can cut your charge times in half if you’re using an RTF/RTR overnight or wall charger.
Charging Current: 1. 0A Simple LED indicator let you know the status of your battery. Voltage 100V-240V external AC adapter. Wide voltage compatibility – Choose between Li-Po and Li-Fe with a switch, and use this battery pack balance charger to recharge 1-4 cells on LiPo/Li-ion 3.
7V-14. 8V or LiFePO4 3. 2V-12. 8V batteries. Bonus Lipo safety bag included.
I needed a simple balance charger for 2S 300mah lipo batteries. This one fit the bill. Granted my batteries are fairly new but when checked with a battery checker after charging the cell voltage is very close.
This Charger is about as simple as you can get for LIPO / LIFE Batteries considering it only has one switch. This charger has performed flawlessly as long as you’re not in a hurry considering it only charges your batteries at 1 amp Max:).
The ProTek R/C “Prodigy 610ez AC/DC” LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger is a single port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates, worldwide 100V/220V voltage versatility, with 100 Watts of power.
the next generation of Prodigy has arrived. Hi-Voltage Capable This charger features a Hi-Voltage LiHV mode that allows you to safely charge Hi-Voltage LiHV capable batteries. You can adjust the charging end voltage of this mode up to 4.
40V per cell, which is considerably higher than 4. 20V per cell of an ordinary LiPo battery. Charging at this higher end voltage requires a Hi-Voltage LiHV capable battery, but the power gains are significant to the overall punch and power for the R/C model.
But please note: battery voltages exceeding 4. 20V per cell is prohibited from sanctioned racing rules, such as ROAR, IFMAR, etc. Dual Power Input The power source can be 11-18V DC input or a 100-240V AC source.
With a builtin power supply, users can directly connect the AC power cord to the main AC input. The power supply can accept AC power from all over the world without the worry of damage. Features: Single Channel Digital AC/DC Balance Charger Maximum 10A Charge Current, up to 100W Hi-Voltage LiHV charging mode allows charging end voltage up to 4.
40V Supports up to 6S Lithium & 15 Cell Nickel Battery Packs Lithium, Nickel & Lead Acid Compatible Multiple Safety Functions Multiple Charge Modes Back-Light Screen Small & Lightweight Portable Design Measure the Internal Resistance of Battery Pack.
Has all the functions you could want for a single battery charger, easy to learn and use. I love being able to read real time voltage of individual cells and actually see it balance the cells. Best $65 I’ve spent on RC yet.
You can use the iMAX B6AC V2 AC/DC everywhere, powered by AC 100-240 V or DC 11-18 V, and for all the batteries types used for RC hobby. It offers a 50 W charge power. – Lithium Battery Meter Plug your LiPo/LiIon/ Li – Fe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell.
Internal Resistance Meter Use this function to measure the resistance in each of your lithium battery’s cells. This helps determine the health of your cells, to be sure you are getting the most power out of them.
Terminal Voltage Control The voltage at which the charger cuts off the charge to each cell can be adjusted. Li – Po 4. 18V-4. 25V (Default 4. 20V) Li – Io 4. 08V-4. 20V (Default 4. 10V) Li – Fe 3. 58V-3.
70V (Default 3. 60V) PC Connectivity You can monitor pack voltage, cell voltage and other data during the charging process. View charge data in realtime graphs. You can also control charging functions and update the firmware on the charger when new updates come out.
The software (PC Only) can be downloaded from SKYRC’s website for free.
Appearance (+): the charger looks and feels way more expensive than it actually is. User-Friendlyness (-): The fact that it doesn’t have a touchscreen makes it a bit more difficult to use. The screen is monochrome and small which makes it limited as to what it can displays at a given time.
That makes you have to scroll through menus to see various info. It has a VERY brief manual and it doesn’t teach you anything. Functionality (+): It pretty does everything and I mean everything that a charger should do.
It lacks multiple battery charging at the same time modularity (expected at this price range), and does not come with the cables that you might need so do your research (for example it doesn’t come with an EC5 and I had to purchase it separately.
However it has all the plugs you’d need. Charging speed is where it lacks the most. For a 6S 6000mAh Admiral (what I use for AL37), it charges at a max of 1. 8A which takes about 3 HOURS to charge the battery!!! That’s like an entire day at the field to fly for 3 minutes.
Overal as good of a charger as it is, it won’t cut it for me because of how incredibly slow it charges 6S. I recommend this charger for smaller batteries but if you buy something like an ISDT Q8 (same price as this) with a power supply, you’d Be charging at a much faster rate.
I never expected to buy a new charger but with the purchase of a Mig 29 and a F14 Tomcat the time had come. I have 2 other battery chargers that I have bought from Motion RC but they won’t charge 6 cell LiPo batteries and now I have 4.
after using this charger, I really like it’s features. It can charge 3 types of lithium battery from 2 cell to 6 cell. it has a timer, battery condition and resistance meter. It can also check cell charge.
When the battery is fully charged it signals. I love it.
Complete with a high-efficiency charger, two Power Cell LiPo batteries, and Traxxas’ iD auto battery identification, the Traxxas Battery & Charger Completer Pack is everything you need to power your projects.
Traxxas’ iD technology takes the hassle out of charging by automatically identifying and optimizing charger settings for any Traxxas iD equipped batteries. Charge up to two batteries, either NiMH or LiPo, at the same time with the high current connector or use Storage mode to prepare your LiPo batteries for extended storage.
The Traxxas Battery & Charger Completer Pack is the solution to all of your charging needs! Features: Charges 2S and 3S LiPo and 5-8 cell NiMH Batteries Capable of charging two batteries at the same time up to 50W (4amps) or single battery at 100W (8amps).
Engineered specifically to fit Traxxas models Traxxas’s iD technology automatically configures and optimizes charge settings for Traxxas iD equipped batteries. Storage Mode prepares LiPo batteries for extended storage Advanced mode for full control of charger setting.
s Charges a NiMH and LiPo at the same time Progress bar and audible alerts, New high current connector with gold-plated copper terminals and integrated balance connector MAXX cable high-efficiency 12 gauge silicone jacketed wire, 30 Day limited warranty.
Includes: 1x Traxxas EZ-Peak 100W Dual Battery Charger w/ AC Power Cord, 2 x Power Cell 11. 1V 5000mAh LiPo 3S Batteries w/ High Current Connectors and Integrated Balance Plugs, 1x Instruction Manual Tech.
Specs: Charger- Input Power: 100-240V/50-60Hz Charge Current: 1-4A (Dual mode), 5-8A (High Output mode) Discharge Current Range: 500mA Current Drain for Balance Ports: 500mA Weight: 20. 3oz (575g). Dimensions: 7×5.
LIPO BATTERY IS THE NEXT STEP TO GO. PEOPLE MAY BUY NIMH. BATTERIES FOR EXTRA TIME BUT THE ONES THEY SEND YOU AS EXTRAS THAT YOU PURCHASE SEPERATELY ARE NOT LIKE THE ONES INCLUDED WITH THE VEHICLES THAT TRAXXAS SELLS AS COMPLETE SETS.
IN FACT THEY ONLY CHARGE FOR ABOUT A 10TH. THE LIFE AS THE HAND PICKED ONES! SO BE SMART AND GET LIPO 5800 OR LARGER OR JUST STICK WITH THE ORIGINAL NIMH. These are great choices for my Traxxas Stampede 2wd Xl5 version.
I got myself the Traxxas Drag Slash 1967 Chevrolet C10 and it is the first Traxxas car I own and of course Traxxas use different battery plugs and these are recommended for it. Now I can see how it performs with them instead of cutting off its plugs and replacing them with the same type of plug all my other cars use.
Now when I use it in the car with the high speed pinion it should do over 100 KM/H with this battery in it. I like to have the recommended batteries and chargers for all my cars before I start to use others and then I can find out which ones perform better or worse with it.
I used this battery for several months. I did not use a traxxas charger so I had to buy the Traxxas charge adapter. The battery worked great for a long time, never got hot when in use or charging, would run 40-50 minutes pulling wheelies ect.
after a month or two the battery began to puff up. It started when I used the car outside in 80-90 degree heat. The battery still never felt hot to the touch. The traxxas adapter tra2792(?) Has to small pin in it.
They began to lose connection and would cause it not charge until corrected. However it still worked good when charged. The battery still continues to swell and I think it has finally wore out the charge connectors.
This battery split the outer wrapper after a few months and eventually grew twice as tall. This is usually an indication a lipo is going to fail, explode, or both. I plan on sending it back to traxxas now.
They can dispose of it and hopefully it won’t burn down their plant or anything crazy like that in the process. Performance wise it was good but for $75 -85 with the adapter to charge on a normal balance charger it should have been much better.
About three months of use and it was toast. Considering I followed the instructions and didn’t abuse the battery that’s not very good.
SKYRc B6Ac V2 is the upgraded version for well-known iMAX B6Ac. compared with iMAX B6Ac, it is more accurate and stable and also has some new features and functions. Users could set the terminal voltage by themselves and connect it to Pc for Pc control and firmware upgrade.
Whats more, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic charging current Limit, capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safer than V1.
-SKYRc B6Ac V2 is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium High Voltage,Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 6A charge current and maximum 50W charge power.
Maximum performance is assured from this Redcat Racing battery charger. It’s designed for LiPo batteries so that you can charge them quickly and easily, and it has a small footprint, so it’s ideal for confined areas.
This Redcat Racing battery charger produces up to 900mA of charge for up to three batteries.
This does the job – I’m using it for charging transmitters modded with 3S 18650 internal batteries (QX7 & Horus). It charges without getting too warm, but the balancing isn’t as precise as any of my programmable chargers.
If you were using this on larger batteries (for flight or car power) I’d be concerned the lack of precise balancing would shorten battery life. It also tends to charge the high cell to slightly above 4.
2v. 4. 28 is normal with my unit. To combat this, I’d recommend using the battery right away at least enough to get it below 4. 2v. The lights go red under charge and green when done, but all 3 change color at the same time, where the high cell should go off 1st, and so on.
Maybe mine’s a bad unit, but I think that’s what you get for the price. For what I’m using it for, it does a fine job. and if used as a 2nd charger to speed up matters while flying, it would work well too.
Just use or balance your batteries fairly quick if you finish the charge on this unit. As with all Lipo charging, do so on a fireproof surface in a safe location, and don’t leave it charging unattended.
Bottom Line – for a 2nd, spare, or extreme economy charger, it does the job and is worth the money. Spend another 3 bucks and get one of the plug-in LED battery alarm/checkers, and enjoy!.
Well, its a battery charger. Using it to charge 3000mah li-po batteries, it takes about 5 hours to recharge each battery. It is by no means a quick or professional unit. It is however great for novice or beginner, just plug it in and it does its thing.
Charger gets mildly warm during charge but nothing i would be concerned about.
This charger works just as described. It is slow and consistent, balances the cells, and just keeps working. Output is 900mah, so just over an hour for every 1000mah your battery has. Oh, and it plugs directly into the wall so you don’t have to find a separate power source like so many other chargers out there.
The E4 is a compact travel sized, intelligent battery charger with simple features. The charger can charge up to 50W (4A) via the AC power cable provided. It also has LED charge level indicators, making charge cycles a breeze.
Charge LiPo, 2-4s with this simple and compact charger. It charges through the XH balance plug of a LiPo battery. Specifications AC Input voltage: 100-240V Charge Power: Max. 50W Charge Current: 4A Balance Current: 400mA LiPo Battery Cell Count: 2-4s Charger connector plug: XH Balance plug Weight: 278g Dimensions: 98*98*36mm Includes 1x AC Power Cable.
I have had several different chargers, this is by far the best. At the field I run it off a small inverter using my truck battery. It charges quickly, the lights indicate percentage of charge, and no settings or adjustments are required.
Stop struggling with faulty batteries any longer. Instead, opt for a reliable charging solution that will help take your batteries from empty to a full charge with the Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Battery Charger.
This battery charger automatically recognizes Traxxas iD batteries and is a great option for 5-8-cell NiMH batteries and 25 and 35 LiPO batteries. The 1-button LiPO storage charge helps protect your battery investment and delivers a perfect charge each and every time.
Some battery chargers are tough to understand and use, but not this model. This charger has an easy-to-use interface with a charging progress indicator and an integrated cooling fan that helps protect against overheating.
All in all, this charging system from Traxxas helps make battery charging a much easier experience than other systems.
This charger is great! It shows the status of each cell and it also does a great job balancing the lipo cells from Traxxas. This unit is purpose built for Traxxas batteries. The live feature is really cool and it links to your phone so you can see the actual charging status of each charging port.
It charges Traxxas ID and Traxxas legacy lipo batteries.
This is a really nice charge and easy to use. It will also charge older lipos with the balancing ports once you remove the covers on the front. I have 12 older lipos and charge those with a modified Traxxas ID connector to banana connector.
You can monitor the charging progress from a portable device. You can read all of the specs in the description but I would recommend this charger.
It’s very quick and keeps its power for ages and good for wheelies with the wheelie bar. I think the wheelie bar should be made of steel possibly. I’m really enjoying this car it’s great fun. It’s also realistic e.
g tyres suspension just don’t give it full throttle unless you have a wheelie bar as it will roll.
The 2992 completer pack contains a powerful, high-capacity #2843x 7. 4V 5800 mah lipo battery pack and a #2970 EZ-Peak plus 4-amp charger. Traxxas exclusive iD battery system is the easiest and safest way to charge your Traxxas batteries.
The EZ-Peak plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There’s no need to be a battery expert or learn how to navigate complex menus.
Just plug in a Traxxas iD battery and press start. Ez-peak plus does all the work for you. At the press of a button, the EZ-Peak plus’s storage mode protects your lipo battery investment by safely preparing the batteries for extended storage.
4-Amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. Ez-peak plus supports conventional lipo charging with its integrated balance ports and advanced mode for manual charging.
Ez-peak plus also charges your NiMH batteries with 4 powerful amps of charging power, making it the only charger youll ever need.
The charger is very user friendly it has different choices of amps or charge rates it has a cooling fan which will allow for longer charger life and more efficient use of power. The battery is also user friendly for a lipo with the balance cord built into the main battery connector iv used the battery 10 times so far and it gives me an hour of full power run time on my brushed 4tech 2.
0 mustang with a brushles version I would of course expect a slightly shorter run time. But all in all iv been using rc for over 20 years and both the charger and the battery are top quality and built with much better materials than what you usually see.
So yes they may be a few dollars more than other brands but so worth it.
Pleased with the EZ ness of the charger with one exception. Not clear on how the Store mode is used. I have experience with old nicad batts. I bought LiPo for these trucks, ran for 30 minutes then had to quite.
I wanted to Store battery. When I plugged into charger it read 4 amps in Store mode. What happens next. Not clear if I am to push start button to draw down, a little confused.
Building on the success of their Pro Duo charger, the Venom Pro Quad 4-port, 7. 0A Multi-Chemistry balance charger is the ultimate solution for hobbyists looking to charge multiple packs quickly and conveniently.
Featuring a monolithic vertical stance, this charger saves valuable bench space by providing four complete charging circuits, each with its own dedicated 100W integrated power supply in a footprint similar to most single output chargers.
Having four dedicated power supplies in one compact package means all four channels are able to receive 100W of power, ensuring you are not diluting your amp rate when charging two, three or four packs simultaneously.
Discreetly located on the back of the charger are two powerful USB 2. 3 Amp charging ports to conveniently power your USB devices. Menu navigation is made easy with a five-button control interface and brightly backlit LCD screen.
All the most common battery chemistries are supported including: LiPo, LiHV, LiFe, Li-Ion, NiMH, NiCD and Pb (lead acid) with a complete assortment of charge leads included in the box along with extra long balance leads to make safe charging in a LiPo sack effortless.
Quad Charge Circuitry This charger features four individual charging circuits allowing you to charge four batteries simultaneously, regardless of battery chemistry or cell count. High Power Charging Circuit The Venom Pro Quad Charger features a powerful 100 Watts charging circuit per channel (X4).
The charger can safely charge or discharge up to 15 cells of NiMH or NiCd batteries and up to 6S LiPo batteries per channel. Lithium Cell Voltage Monitoring The Venom Pro Quad Charger can monitor and balance individual cells within a LiPo battery in either charge or discharge mode.
Multiple Chemistry Charging The Venom Pro Quad Charger will charge Li-ion, LiPo, L1HV, LiFe, NiMH, NiCd and Pb battery types. USB Accessory Charge Ports The Venom Pro Quad features two 5V / 2. 3A accessory charging ports for keeping your devices powered up.
When I got into flying quads 3 years ago I bought an imax B6AC charger, and it has been a great little charger this whole time. But now I have a ton of batteries with different charging parameters. I found that just charging batteries for flying was taking more than three hours.
I had to charge the battery for my fatshark goggles, 3S/4S batteries for my 5″ quad, and 2S batteries for my 2″ quad. Then when I got home I had to storage charge all of these as well. With the Venom quad pro I can charge all of my batteries at the same time (yes I parallel charge).
It is super simple to use, it has the same control scheme as other four-button chargers. I really like it.
We were hesitant to get this due to the hefty price tag but. DO IT! You will not be disappointed!! We have 13 RC trucks/cars and also drones. This charger takes care of them all!! There are enough connectors to get you started with just about every battery you have.
Even comes with alligator clips to charge batteries you don’t have a connector for. Also, it is amazingly SMALL and PORTABLE! We have taken this out to the track no problem! There are 4 ports to charge 4 separate batteries all at the same time! Yes, you can charge your LiPo’s and NiMH batteries AT THE SAME EXACT TIME! This charger will not have you disappointed!!.
Arrived a week or so ago and just had its first weekend of use. 6 x 5000mah 3 cell lipos’s for my boats, a NIMH for my Stampede and a 4 cell and 6 cell lipo for my Vorza all done in a bit under 2 hours charging at 1C from balance state of 3.
8 volts and a top up charge for the NIMH. Would have previously taken all Friday night and half the morning so a great time saver. Balance function seems strong and accurate. Made a funny noise Sunday night for the first 30 seconds while putting all the batteries back into storage charge.
Hopefully not a sign the fan(s) or bearings will be an issue. Will keep an eye on it. Overall very happy with purchase so far.
The ToolKitRC M4AC 30W Compact Balance Charger (XT30) is a small lithium battery balance charger that has excellent performance! Compare to similar products, the power performance of the M4AC is increased by 33%-66%.
The display features IPS full viewing angle display, voltage, current, charging status, and everything you need to see at first glance! Also comes with a 32Bit ARM processor to give you a more precise balance accuracy of ToolkitRC M4AC 30W 2.
This charger is good. Build quality is really nice, has a great feel to it, and would be easy to pack along for travel. Screen is bright and easy to read. Just plug your battery in, set the function and C rating, and wait.
Stops charging automatically when full. I had to give 4 stars because it only supports up to 4S packs and is not ideal for use with a balance board for parallel charging because of limited amp selection.
Bought a couple of these for stocking stuffers and ended up having to buy more so i could keep the first batch myself. Quick n easy for single 4s and 3s batteries for my planes and quads. No need to faf about with a parallel board matching voltages of batteries.
Also, on the other hand, paired with a 6 port parallel board you can charge a whole array of smaller batteries for your 2. 5″ or similar quads. 6x 3s 300mah, at a tad over 1c, with one button push to start charging.
Only complaint. No beep or other audible alert when charging is complete.
Don’t expect a full featured charger for this price or size (both small). But what it does, it does well. Can charge LiHV, and has options for storage voltage. can easily select voltage and amps. If you have a 4s in the 1000mah range (or less) what more do you need?.
This charger is a great option for track and field use. Featuring a clear 3. 5″ display, this charger has an easy to use menu and allows you to monitor the battery during the charge/discharge cycle. The channels output plug uses an XT60 connector for consistent and safe connections.
Package includes one charger, one power chord, one screen protector and one USB cable. Features: Perfect for charging 1-6S LiPo batteries Crystal clear 3. 5″ LC display XT60 Output connector Includes screen protector Wheel select button Integrated 200W power supply Specifications: Input voltage: 100-240V AC; 7-28VDC, max.
30A Battery type: LiHV/LiPo/LiIon 1-6S, NiMH 1-16S, Pb 1-10S Charge power: 0. 1-15A (max. 250W per channel in SYNC mode), 0. 2-25A (max. 500W both channels combined in ASYNC mode) Discharge power: 0.
1-3A (max. 12W per channel), 0. 1-15A (max. 250W per channel in Recycle mode) Balance current: 1. 00.
Contrary to what SOME people believe, when building a good Trail Rig, with decent Crawling ability. SOFTER Springs are the way to go!! You NEED at least 1/4″ of “Droop”. It pains me to see so many “Bashers” put down an ENTIRE Company, because THEY decided to get a good Trail Rig, and RUIN its capabilities by setting up the Suspension so it will be completely TOPPED OUT, not sinking down even a Hair, when they set it on the ground.
Google “Droop in RC”, and set your Rig up RIGHT, and you will really enjoy its Performance!.
Simple Plug-and-Charge Operation! This is the EecoPower “ELetron Li32 AC” LiPo specific AC Battery Charger. Every hobby enthusiast is unique, each with their own specific needs and expectations. Not everyone needs a professional grade, high performance battery charger, while others simply dont want to spend big bucks on the latest flavor of the month.
EcoPower is ready to deliver with the ELetron Li32 AC! Age Group: adult.
The 2991 completer pack contains two powerful, high-capacity #2869X 7. 4V 7600 mAh LiPo battery packs and a #2972 EZ-Peak Dual 8-amp charger. Charging Traxxas batteries is now safer, faster, and easier than ever before with the exclusive iD system.
Just plug in a pair of Traxxas iD batteries and press Start. Traxxas? iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries.
You don’t need to be a battery expert to charge with the EZ-Peak Dual. Costly charging mistakes are a thing of the past. The EZ-Peak Dual fast charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery with up to the maximum 100 watt (8-amps) output.
You can even charge a NiMH and a LiPo at the same time. LED progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Duals Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.
Advanced Mode allows you to charge Traxxas batteries without the iD system, making EZ-Peak Dual the only charger you will ever need.
In conclusion, the charger for lipo batteries is a great investment. It is a reliable product that will help you keep your batteries in top condition. This charger is easy to use and is very versatile.
It can be used to charge all types of batteries, including NiCad, NiMH, and lipo batteries.